19ca68d921
- Add hid.h Obtained from: NetBSD NOTE: This undoes some changes I'd made to prefix the processor name defines with PVR_. This was due to my original decision to use MPC750 as a cpu name. With this changed, the PVR_ change is no longer required.
130 lines
5.6 KiB
C
130 lines
5.6 KiB
C
/*-
|
|
* Copyright (c) 2000 Tsubai Masanari. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $NetBSD: hid.h,v 1.2 2001/08/22 21:05:25 matt Exp $
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _POWERPC_HID_H_
|
|
#define _POWERPC_HID_H_
|
|
|
|
/* Hardware Implementation Dependent registers for the PowerPC */
|
|
|
|
#define HID0_EMCP 0x80000000 /* Enable MCP */
|
|
#define HID0_DBP 0x40000000 /* Disable 60x bus parity generation */
|
|
#define HID0_EBA 0x20000000 /* Enable 60x bus address parity checking */
|
|
#define HID0_EBD 0x10000000 /* Enable 60x bus data parity checking */
|
|
#define HID0_BCLK 0x08000000 /* CLK_OUT clock type selection */
|
|
#define HID0_EICE 0x04000000 /* Enable ICE output */
|
|
#define HID0_TBEN 0x04000000 /* Time base enable (7450) */
|
|
#define HID0_ECLK 0x02000000 /* CLK_OUT clock type selection */
|
|
#define HID0_PAR 0x01000000 /* Disable precharge of ARTRY */
|
|
#define HID0_STEN 0x01000000 /* Software table search enable (7450) */
|
|
#define HID0_DOZE 0x00800000 /* Enable doze mode */
|
|
#define HID0_NAP 0x00400000 /* Enable nap mode */
|
|
#define HID0_SLEEP 0x00200000 /* Enable sleep mode */
|
|
#define HID0_DPM 0x00100000 /* Enable Dynamic power management */
|
|
#define HID0_RISEG 0x00080000 /* Read I-SEG */
|
|
#define HID0_BHTCLR 0x00080000 /* Clear branch history table (7450) */
|
|
#define HID0_EIEC 0x00040000 /* Enable internal error checking */
|
|
#define HID0_XAEN 0x00040000 /* Enable eXtended Addressing (7450) */
|
|
#define HID0_NHR 0x00010000 /* Not hard reset */
|
|
#define HID0_ICE 0x00008000 /* Enable i-cache */
|
|
#define HID0_DCE 0x00004000 /* Enable d-cache */
|
|
#define HID0_ILOCK 0x00002000 /* i-cache lock */
|
|
#define HID0_DLOCK 0x00001000 /* d-cache lock */
|
|
#define HID0_ICFI 0x00000800 /* i-cache flush invalidate */
|
|
#define HID0_DCFI 0x00000400 /* d-cache flush invalidate */
|
|
#define HID0_SPD 0x00000200 /* Disable speculative cache access */
|
|
#define HID0_IFEM 0x00000100 /* Enable M-bit for I-fetch */
|
|
#define HID0_SGE 0x00000080 /* Enable store gathering */
|
|
#define HID0_DCFA 0x00000040 /* Data cache flush assist */
|
|
#define HID0_BTIC 0x00000020 /* Enable BTIC */
|
|
#define HID0_ABE 0x00000008 /* Enable address broadcast */
|
|
#define HID0_BHT 0x00000004 /* Enable branch history table */
|
|
#define HID0_NOPTI 0x00000001 /* No-op the dcbt(st) */
|
|
|
|
#define HID0_BITMASK \
|
|
"\20" \
|
|
"\040EMCP\037DBP\036EBA\035EBD\034BCLK\033EICE\032ECLK\031PAR" \
|
|
"\030DOZE\027NAP\026SLEEP\025DPM\024RISEG\023EIEC\022res\021NHR" \
|
|
"\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011IFEM" \
|
|
"\010SGE\007DCFA\006BTIC\005FBIOB\004ABE\003BHT\002NOPDST\001NOPTI"
|
|
|
|
#define HID0_7450_BITMASK \
|
|
"\20" \
|
|
"\040EMCP\037b1\036b2\035b3\034b4\033TBEN\032b6\031STEN" \
|
|
"\030b8\027NAP\026SLEEP\025DPM\024b12\023BHTCLR\022XAEN\021NHR" \
|
|
"\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011b23" \
|
|
"\010SGE\007b25\006BTIC\005LRSTK\004FOLD\003BHT\002NOPDST\001NOPTI"
|
|
|
|
/*
|
|
* HID0 bit definitions per cpu model
|
|
*
|
|
* bit 603 604 750 7400 7410 7450
|
|
* 0 EMCP EMCP EMCP EMCP EMCP -
|
|
* 1 - ECP DBP - - -
|
|
* 2 EBA EBA EBA EBA EDA -
|
|
* 3 EBD EBD EBD EBD EBD -
|
|
* 4 SBCLK - BCLK BCKL BCLK -
|
|
* 5 EICE - - - - TBEN
|
|
* 6 ECLK - ECLK ECLK ECLK -
|
|
* 7 PAR PAR PAR PAR PAR STEN
|
|
* 8 DOZE - DOZE DOZE DOZE -
|
|
* 9 NAP - NAP NAP NAP NAP
|
|
* 10 SLEEP - SLEEP SLEEP SLEEP SLEEP
|
|
* 11 DPM - DPM DPM DPM DPM
|
|
* 12 RISEG - - RISEG - -
|
|
* 13 - - - EIEC EIEC BHTCLR
|
|
* 14 - - - - - XAEN
|
|
* 15 - NHR NHR NHR NHR NHR
|
|
* 16 ICE ICE ICE ICE ICE ICE
|
|
* 17 DCE DCE DCE DCE DCE DCE
|
|
* 18 ILOCK ILOCK ILOCK ILOCK ILOCK ILOCK
|
|
* 19 DLOCK DLOCK DLOCK DLOCK DLOCK DLOCK
|
|
* 20 ICFI ICFI ICFI ICFI ICFI ICFI
|
|
* 21 DCFI DCFI DCFI DCFI DCFI DCFI
|
|
* 22 - - SPD SPD SPG SPD
|
|
* 23 - - IFEM IFTT IFTT -
|
|
* 24 - SIE SGE SGE SGE SGE
|
|
* 25 - - DCFA DCFA DCFA -
|
|
* 26 - - BTIC BTIC BTIC BTIC
|
|
* 27 FBIOB - - - - LRSTK
|
|
* 28 - - ABE - - FOLD
|
|
* 29 - BHT BHT BHT BHT BHT
|
|
* 30 - - - NOPDST NOPDST NOPDST
|
|
* 31 NOOPTI - NOOPTI NOPTI NOPTI NOPTI
|
|
*
|
|
* 604: ECP = Enable cache parity checking
|
|
* 604: SIE = Serial instruction execution disable
|
|
* 7450: TBEN = Time Base Enable
|
|
* 7450: STEN = Software table lookup enable
|
|
* 7450: BHTCLR = Branch history clear
|
|
* 7450: LRSTK = Link Register Stack Enable
|
|
* 7450: FOLD = Branch folding enable
|
|
*/
|
|
|
|
#endif /* _POWERPC_HID_H_ */
|