freebsd-dev/sbin/newfs/newfs.8

395 lines
13 KiB
Groff

.\" Copyright (c) 1983, 1987, 1991, 1993, 1994
.\" The Regents of the University of California. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by the University of
.\" California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" @(#)newfs.8 8.6 (Berkeley) 5/3/95
.\" $FreeBSD$
.\"
.Dd December 19, 2000
.Dt NEWFS 8
.Os BSD 4.2
.Sh NAME
.Nm newfs ,
.Nm mount_mfs
.Nd construct a new file system
.Sh SYNOPSIS
.Nm
.Op Fl NO
.Op Fl S Ar sector-size
.Op Fl T Ar disktype
.Op Fl a Ar maxcontig
.Op Fl b Ar block-size
.Op Fl c Ar cylinders
.Op Fl d Ar rotdelay
.Op Fl e Ar maxbpg
.Op Fl f Ar frag-size
.Op Fl i Ar bytes
.Op Fl k Ar skew
.Op Fl l Ar interleave
.Op Fl m Ar free space
.Op Fl n Ar rotational positions
.Op Fl o Ar optimization
.Op Fl p Ar sectors
.Op Fl r Ar revolutions
.Op Fl s Ar size
.Op Fl t Ar tracks
.Op Fl u Ar sectors
.Op Fl v
.Op Fl x Ar sectors
.Ar special
.Nm mount_mfs
.Op Fl N
.Op Fl F Ar file
.Op Fl T Ar disktype
.Op Fl a Ar maxcontig
.Op Fl b Ar block-size
.Op Fl c Ar cylinders
.Op Fl d Ar rotdelay
.Op Fl e Ar maxbpg
.Op Fl f Ar frag-size
.Op Fl i Ar bytes
.Op Fl m Ar free space
.Op Fl n Ar rotational positions
.Op Fl o Ar options
.Op Fl s Ar size
.Ar special node
.Sh WARNING
.Nm mount_mfs
is being phased out.
Please see
.Xr mdconfig 8
for the replacement.
.Sh DESCRIPTION
.Nm Newfs
is used to initialize and clear filesystems before first use.
Before running
.Nm
or
.Nm mount_mfs ,
the disk must be labeled using
.Xr disklabel 8 .
.Nm Newfs
builds a file system on the specified special file.
(We often refer to the
.Dq special file
as the
.Dq disk ,
although the special file need not be a physical disk.
In fact, it need not even be special.)
Typically the defaults are reasonable, however
.Nm
has numerous options to allow the defaults to be selectively overridden.
.Pp
.Nm Mount_mfs
is used to build a file system in virtual memory and then mount it
on a specified node.
.Nm Mount_mfs
exits and the contents of the file system are lost
when the file system is unmounted.
If
.Nm mount_mfs
is sent a signal while running,
for example during system shutdown,
it will attempt to unmount its
corresponding file system.
The parameters to
.Nm mount_mfs
are the same as those to
.Nm .
If the
.Fl T
flag is specified (see below), the special file is unused.
Otherwise, it is only used to read the disk label which provides
a set of configuration parameters for the memory based file system.
The special file is typically that of the primary swap area,
since that is where the file system will be backed up when
free memory gets low and the memory supporting
the file system has to be paged.
.Pp
The following options define the general layout policies:
.Bl -tag -width indent
.It Fl T Ar disktype
For backward compatibility and for
.Nm mount_mfs .
.It Fl F Ar file
.Nm Mount_mfs
will use this file for the image of the filesystem. When
.Nm mount_mfs
exits, this file will be left behind.
.It Fl N
Cause the file system parameters to be printed out
without really creating the file system.
.It Fl O
Create a
.Bx 4.3
format filesystem.
This options is primarily used to build root filesystems
that can be understood by older boot ROMs.
.It Fl T
Use information for the specified disk from
.Pa /etc/disktab
instead of trying to get the information from a disklabel.
.It Fl a Ar maxcontig
Specify the maximum number of contiguous blocks that will be
laid out before forcing a rotational delay (see the
.Fl d
option).
The default value is 1.
See
.Xr tunefs 8
for more details on how to set this option.
.It Fl b Ar block-size
The block size of the file system, in bytes. It must be a power of 2. The
default size is 8192 bytes, and the smallest allowable size is 4096 bytes.
.It Fl c Ar #cylinders/group
The number of cylinders per cylinder group in a file system. The default value
is 16. The maximum value is dependent on a number of other parameters, in
particular the block size. The best way to find the maximum value for a
specific file system is to attempt to specify a value which is far too large:
.Nm
will print out the maximum value.
.It Fl d Ar rotdelay
This parameter once specified the minimum time in milliseconds required to
initiate another disk transfer on the same cylinder. It was used in determining
the rotationally optimal layout for disk blocks within a file. Modern disks
with read/write-behind achieve higher performance with this feature disabled, so
this value should be left at the default value of 0 milliseconds. See
.Xr tunefs 8
for more details on how to set this option.
.It Fl e Ar maxbpg
Indicate the maximum number of blocks any single file can
allocate out of a cylinder group before it is forced to begin
allocating blocks from another cylinder group.
The default is about one quarter of the total blocks in a cylinder group.
See
.Xr tunefs 8
for more details on how to set this option.
.It Fl f Ar frag-size
The fragment size of the file system in bytes. It must be a power of two
ranging in value between
.Ar blocksize Ns /8
and
.Ar blocksize .
The default is 1024 bytes.
.It Fl i Ar number of bytes per inode
Specify the density of inodes in the file system.
The default is to create an inode for every
.Pq 4 * Ar frag-size
bytes of data space.
If fewer inodes are desired, a larger number should be used;
to create more inodes a smaller number should be given.
One inode is required for each distinct file, so this value effectively
specifies the average file size on the file system.
.It Fl m Ar free space \&%
The percentage of space reserved from normal users; the minimum free
space threshold.
The default value used is
defined by
.Dv MINFREE
from
.Aq Pa ufs/ffs/fs.h ,
currently 8%.
See
.Xr tunefs 8
for more details on how to set this option.
.It Fl n Ar number of distinguished rotational positions
UFS has the ability to keep track of the availability of blocks at different
rotational positions, so that it could lay out the data to be picked up with
minimum rotational latency. This parameter specifies the default number of
rotational positions to distinguish.
.Pp
Nowadays this value should be set to 1 (which essentially disables the
rotational position table) because modern drives with read-ahead and
write-behind do better without the rotational position table.
.It Fl o Ar optimization\ preference
.Pq Ar space No or Ar time .
The file system can either be instructed to try to minimize the time spent
allocating blocks, or to try to minimize the space fragmentation on the disk.
If the value of minfree (see above) is less than 8%,
the default is to optimize for
.Ar space ;
if the value of minfree is greater than or equal to 8%,
the default is to optimize for
.Ar time .
See
.Xr tunefs 8
for more details on how to set this option.
.It Fl s Ar size
The size of the file system in sectors. This value defaults to the size of the
raw partition specified in
.Ar special
(in other words,
.Nm
will use the entire partition for the file system).
.It Fl v
Specify that the disk does not contain any partitions, and that
.Nm
should build a file system on the whole disk.
This option is useful for synthetic disks such as
.Nm vinum .
.El
.Pp
The following options override the standard sizes for the disk geometry.
Their default values are taken from the disk label.
Changing these defaults is useful only when using
.Nm
to build a file system whose raw image will eventually be used on a
different type of disk than the one on which it is initially created
(for example on a write-once disk).
Note that changing any of these values from their defaults will make
it impossible for
.Xr fsck 8
to find the alternate superblocks if the standard superblock is lost.
.Bl -tag -width indent
.It Fl S Ar sector-size
The size of a sector in bytes (almost never anything but 512).
.It Fl k Ar sector \&0 skew , per track
Used to describe perturbations in the media format to compensate for
a slow controller.
Track skew is the offset of sector 0 on track N relative to sector 0
on track N-1 on the same cylinder.
This option is of historical importance only; modern controllers are always fast
enough to handle operations back-to-back.
.It Fl l Ar hardware sector interleave
Used to describe perturbations in the media format to compensate for
a slow controller.
Interleave is physical sector interleave on each track,
specified as the denominator of the ratio:
.Dl sectors read/sectors passed over
Thus an interleave of 1/1 implies contiguous layout, while 1/2 implies
logical sector 0 is separated by one sector from logical sector 1.
This option is of historical importance only; the physical sector layout of
modern disks is not visible from outside.
.It Fl p Ar spare sectors per track
Spare sectors (bad sector replacements) are physical sectors that occupy
space at the end of each track.
They are not counted as part of the sectors/track
.Pq Fl u
since they are not available to the file system for data allocation.
This option is of historical importance only. Modern disks perform their own
bad sector allocation.
.It Fl r Ar revolutions/minute
The speed of the disk in revolutions per minute. This value is no longer of
interest, since all the parameters which depend on it are usually disabled.
.It Fl t Ar #tracks/cylinder
The number of tracks/cylinder available for data allocation by the file
system.
The default is 1.
If zero is specified, the value from the disklabel will be used.
.It Fl u Ar sectors/track
The number of sectors per track available for data allocation by the file
system.
The default is 4096.
If zero is specified, the value from the disklabel will be used.
This does not include sectors reserved at the end of each track for bad
block replacement (see the
.Fl p
option).
.It Fl x Ar spare sectors per cylinder
Spare sectors (bad sector replacements) are physical sectors that occupy
space at the end of the last track in the cylinder.
They are deducted from the sectors/track
.Pq Fl u
of the last track of each cylinder since they are not available to the file
system for data allocation.
This option is of historical importance only. Modern disks perform their own
bad sector allocation.
.El
.Pp
The options to the
.Nm mount_mfs
command are as described for the
.Nm
command, except for the
.Fl o
option.
.Pp
That option is as follows:
.Bl -tag -width indent
.It Fl o
Options are specified with a
.Fl o
flag followed by a comma separated string of options.
See the
.Xr mount 8
man page for possible options and their meanings.
.El
.Sh EXAMPLES
.Pp
.Dl newfs -b 16384 -f 4096 -c 100 /dev/ad3s1a
.Pp
Creates a new ufs file system on
.Pa ad3s1a .
.Nm
will use a block size of 16384 bytes, a fragement size of 4096 bytes
and have 100 cylinders per cylinder group rather than the defaults.
These values are tend to produce better performance than the defaults
for file systems larger than about 5 gigabytes.
.Pp
.Dl mount_mfs -s 131072 -o nosuid,nodev /dev/da0s1b /tmp
.Pp
Mount a 64 MB large memory file system on
.Pa /tmp ,
with
.Xr mount 8
options
.Ar nosuid
and
.Ar nodev .
.Sh SEE ALSO
.Xr fdformat 1 ,
.Xr disktab 5 ,
.Xr fs 5 ,
.Xr camcontrol 8 ,
.Xr disklabel 8 ,
.Xr diskpart 8 ,
.Xr dumpfs 8 ,
.Xr fsck 8 ,
.Xr mount 8 ,
.Xr tunefs 8 ,
.Xr vinum 8
.Rs
.%A M. McKusick
.%A W. Joy
.%A S. Leffler
.%A R. Fabry
.%T A Fast File System for UNIX
.%J ACM Transactions on Computer Systems 2
.%V 3
.%P pp 181-197
.%D August 1984
.%O (reprinted in the BSD System Manager's Manual)
.Re
.Sh HISTORY
The
.Nm
command appeared in
.Bx 4.2 .