freebsd-dev/sys/dev/ath/ath_hal
Adrian Chadd 0a2cefc676 Add channel survey support to the AR5212 HAL.
The AR5212 series of MACs implement the same channel counters as the
later 11n chips - except, of course, the 11n specific counter (extension
channel busy.)

This allows users of these NICs to use 'athsurvey' to see how busy their
current channel is.

Tested:

* AR5212, AR2413 NICs, STA mode

Approved by:	re@ (gleb)
2013-10-08 11:28:59 +00:00
..
ah_regdomain Add new regulatory domain. 2013-03-24 04:42:56 +00:00
ar5210 Begin adding support to explicitly set the current chainmask. 2013-02-25 22:42:43 +00:00
ar5211 Begin adding support to explicitly set the current chainmask. 2013-02-25 22:42:43 +00:00
ar5212 Add channel survey support to the AR5212 HAL. 2013-10-08 11:28:59 +00:00
ar5312 Stop using the hardware register value byte order swapping for now, 2012-04-19 03:26:21 +00:00
ar5416 Add bluetooth fixes to the AR5416/AR92xx HAL: 2013-06-07 05:17:58 +00:00
ar9001 Use the TPC bank by default for AR9160. 2013-04-17 07:22:23 +00:00
ar9002 Set the antenna "config group" field. 2013-06-12 15:18:10 +00:00
ar9003 Add device identification and probe/attach support for the QCA9565. 2013-05-02 00:59:39 +00:00
ah_debug.h HAL additions to enable MCI Bluetooth coexistence in the AR9300 HAL. 2013-04-05 07:41:47 +00:00
ah_decode.h Add a threadid to the ah_decode API. 2012-04-04 20:46:20 +00:00
ah_desc.h Document the AR9285/AR9485 LNA configuration information that's 2013-06-05 00:39:20 +00:00
ah_devid.h Add device identification and probe/attach support for the QCA9565. 2013-05-02 00:59:39 +00:00
ah_diagcodes.h Add some more diagnostic codes. 2012-08-24 00:17:39 +00:00
ah_eeprom_9287.c Move this magic check to only occur if no eeprom data is given. 2012-08-26 04:26:49 +00:00
ah_eeprom_9287.h Make sure the extended regdomain word is initialised. 2011-06-28 00:01:55 +00:00
ah_eeprom_v1.c Fix the eeprom set API method to return HAL_STATUS. 2011-05-14 15:12:02 +00:00
ah_eeprom_v1.h
ah_eeprom_v3.c Fix the eeprom set API method to return HAL_STATUS. 2011-05-14 15:12:02 +00:00
ah_eeprom_v3.h
ah_eeprom_v4k.c "Upgrade" the AR9285 code to support PCI/ART EEPROM on flash. 2012-04-20 21:56:13 +00:00
ah_eeprom_v4k.h Bring over a pdadc calibration fix from ath9k - unused power detector 2011-04-22 10:57:46 +00:00
ah_eeprom_v14.c Introduce the FRAC_5G EEPROM parameter. 2011-07-30 13:45:12 +00:00
ah_eeprom_v14.h Introduce the FRAC_5G EEPROM parameter. 2011-07-30 13:45:12 +00:00
ah_eeprom.h Bring over some new EEPROM regulatory domain flags. 2012-08-24 01:14:00 +00:00
ah_internal.h Add a HAL local routine to map the 2GHz channel frequency to an IEEE 2013-06-26 04:46:03 +00:00
ah_regdomain.c Add XC900 SKU mapping. 2012-12-07 06:38:30 +00:00
ah_regdomain.h Migrate the regulatory database definitions into separate header files 2011-03-10 03:13:56 +00:00
ah_soc.h
ah.c Add a HAL local routine to map the 2GHz channel frequency to an IEEE 2013-06-26 04:46:03 +00:00
ah.h Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver. 2013-06-12 14:52:57 +00:00