freebsd-dev/sys/netinet6
Ruslan Ermilov 303989a2f3 Use sparse initializers for "struct domain" and "struct protosw",
so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
..
ah6.h
ah_aesxcbcmac.c Correct a buffer overflow which can occur when decompressing a 2005-07-27 08:41:17 +00:00
ah_aesxcbcmac.h
ah_core.c scope cleanup. with this change 2005-07-25 12:31:43 +00:00
ah_input.c
ah_output.c
ah.h
dest6.c
esp6.h
esp_aesctr.c AES counter mode uses 8byte IV, not 16 bytes. 2005-10-12 09:13:48 +00:00
esp_aesctr.h
esp_core.c
esp_input.c
esp_output.c
esp_rijndael.c
esp_rijndael.h
esp.h
frag6.c
icmp6.c sync with KAME regarding NDP 2005-10-21 16:23:01 +00:00
icmp6.h
in6_cksum.c scope cleanup. with this change 2005-07-25 12:31:43 +00:00
in6_gif.c fix IP(v4) over IPv6 tunneling most likely broken with ifnet changes. 2005-06-20 20:17:00 +00:00
in6_gif.h
in6_ifattach.c sync with KAME regarding NDP 2005-10-21 16:23:01 +00:00
in6_ifattach.h sync with KAME regarding NDP 2005-10-21 16:23:01 +00:00
in6_pcb.c IPv6 was improperly defining its malloc type the same as IPv4 (M_IPMADDR, 2005-09-07 10:11:49 +00:00
in6_pcb.h
in6_proto.c Use sparse initializers for "struct domain" and "struct protosw", 2005-11-09 13:29:16 +00:00
in6_rmx.c Use monotonic 'time_uptime' instead of 'time_second' as timebase 2005-09-19 22:54:55 +00:00
in6_src.c sync with KAME (removed a unnecesary non-standard macro) 2005-10-19 16:53:24 +00:00
in6_var.h sync with KAME regarding NDP 2005-10-21 16:23:01 +00:00
in6.c statically configured IPv6 address is properly added/deleted now 2005-10-31 23:06:04 +00:00
in6.h sync with KAME regarding NDP 2005-10-21 16:23:01 +00:00
ip6_ecn.h
ip6_forward.c supports stealth forwarding in IPv6, as well as in IPv4 2005-08-10 09:13:35 +00:00
ip6_fw.c create sysctl tree dynamically. it is required to share 2005-08-11 07:28:01 +00:00
ip6_fw.h
ip6_id.c
ip6_input.c supported an ndp command suboption to disable IPv6 in the given interface 2005-10-19 16:20:18 +00:00
ip6_mroute.c fixed a kernel crash when IPv6 PIM-SM routing is enabled and a PIM register message is received 2005-10-17 13:47:31 +00:00
ip6_mroute.h update comments: 2005-07-20 08:59:45 +00:00
ip6_output.c sync with KAME regarding NDP 2005-10-21 16:23:01 +00:00
ip6_var.h sync with KAME (renamed a macro IPV6_DADOUTPUT to IPV6_UNSPECSRC) 2005-10-21 15:45:13 +00:00
ip6.h
ip6protosw.h
ipcomp6.h
ipcomp_core.c
ipcomp_input.c
ipcomp_output.c
ipcomp.h
ipsec6.h
ipsec.c scope cleanup. with this change 2005-07-25 12:31:43 +00:00
ipsec.h
mld6_var.h sync with KAME regarding NDP 2005-10-21 16:23:01 +00:00
mld6.c sync with KAME regarding NDP 2005-10-21 16:23:01 +00:00
nd6_nbr.c sync with KAME regarding NDP 2005-10-21 16:23:01 +00:00
nd6_rtr.c sync with KAME regarding NDP 2005-10-21 16:23:01 +00:00
nd6.c fixed a compilation failure on amd64/sparc64/ia64 2005-10-22 05:07:16 +00:00
nd6.h sync with KAME regarding NDP 2005-10-21 16:23:01 +00:00
pim6_var.h Remove public declarations of variables that were forgotten when they were 2005-08-10 07:10:02 +00:00
pim6.h
raw_ip6.c Raw IPv6 checksum must use the protocol number of the last header, instead of the first next-header value. 2005-10-19 01:21:49 +00:00
raw_ip6.h
README nuked non-existing commands 2005-10-21 16:31:39 +00:00
route6.c scope cleanup. with this change 2005-07-25 12:31:43 +00:00
scope6_var.h scope cleanup. with this change 2005-07-25 12:31:43 +00:00
scope6.c oops, make it compilable. i need sleep. X-( 2005-07-25 17:28:39 +00:00
tcp6_var.h
udp6_output.c scope cleanup. with this change 2005-07-25 12:31:43 +00:00
udp6_usrreq.c scope cleanup. with this change 2005-07-25 12:31:43 +00:00
udp6_var.h

a note to committers about KAME tree
$FreeBSD$
KAME project


FreeBSD IPv6/IPsec tree is from KAMEproject (http://www.kame.net/).
To synchronize KAME tree and FreeBSD better today and in the future,
please understand the following:

- DO NOT MAKE COSTMETIC CHANGES.
  "Cosmetic changes" here includes tabify, untabify, removal of space at EOL,
  minor KNF items, and whatever adds more output lines on "diff freebsd kame".
  To make future synchronization easier. it is critical to preserve certain
  statements in the code.  Also, as KAME tree supports all 4 BSDs (Free, Open,
  Net, BSD/OS) in single shared tree, it is not always possible to backport
  FreeBSD changes into KAME tree.  So again, please do not make cosmetic
  changes.  Even if you think it a right thing, that will bite KAME guys badly
  during upgrade attempts, and prevent us from synchronizing two trees.
  (you don't usually make cosmetic changes against third-party code, do you?)

- REPORT CHANGES/BUGS TO KAME GUYS.
  It is not always possible for KAME guys to watch all the freebsd mailing
  list traffic, as the traffic is HUGE.  So if possible, please, inform
  kame guys of changes you made in IPv6/IPsec related portion.  Contact
  path would be snap-users@kame.net or KAME PR database on www.kame.net.
  (or to core@kame.net if it is necessary to make it confidential)

Thank you for your cooperation and have a happy IPv6 life!


Note: KAME-origin code is in the following locations.
The above notice applies to corresponding manpages too.
The list may not be complete.  If you see $KAME$ in the code, it is from
KAME distribution.  If you see some file that is IPv6/IPsec related, it is
highly possible that the file is from KAME distribution.

include/ifaddrs.h
lib/libc/net
lib/libc/net/getaddrinfo.c
lib/libc/net/getifaddrs.c
lib/libc/net/getnameinfo.c
lib/libc/net/ifname.c
lib/libc/net/ip6opt.c
lib/libc/net/map_v4v6.c
lib/libc/net/name6.c
lib/libftpio
lib/libipsec
sbin/ip6fw
sbin/ping6
sbin/rtsol
share/doc/IPv6
share/man/man4/ip6.4
share/man/man4/inet6.4
sys/crypto (except sys/crypto/rc4)
sys/kern/uipc_mbuf2.c
sys/net/if_faith.[ch]
sys/net/if_gif.[ch]
sys/net/if_stf.[ch]
sys/net/pfkeyv2.h
sys/netinet/icmp6.h
sys/netinet/in_gif.[ch]
sys/netinet/ip6.h
sys/netinet/ip_encap.[ch]
sys/netinet6
sys/netkey
usr.sbin/faithd
usr.sbin/ifmcstat
usr.sbin/mld6query
usr.sbin/ndp
usr.sbin/rip6query
usr.sbin/route6d
usr.sbin/rrenumd
usr.sbin/rtadvd
usr.sbin/rtsold
usr.sbin/setkey
usr.sbin/traceroute6