John Baldwin f7a66f06ec Restore support for the 5706C bce(4) phy that was broken during the ... addition of SerDes support. According to the docs, the 5706C and 5708C phys are supposed to use the same MII model that is separate from the SerDes parts, but the 5706C actually uses the MII model of the SerDes parts. To fix this, readd the old 5706C entry to miidevs and add a special check in brgphy_probe() for phys that match the 5706C ID. If the phy is supported by the gentbi(4) driver, then it's a SerDes phy, so we fail the probe and let gentbi(4) grab it. Otherwise, it's a 5706C phy, so we let brgphy(4) grab it. In coordination with: dwhite		2007-02-21 18:17:44 +00:00
..
acphy.c	Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL	2007-01-12 22:59:38 +00:00
acphyreg.h	- Correct the AC_MCTL_BYP_PCS constant.	2007-01-12 22:58:04 +00:00
amphy.c	Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table	2007-01-12 22:27:46 +00:00
amphyreg.h
bmtphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
bmtphyreg.h
brgphy.c	Restore support for the 5706C bce(4) phy that was broken during the	2007-02-21 18:17:44 +00:00
brgphyreg.h	Fix typos in comments while I am here.	2007-02-13 00:34:32 +00:00
ciphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
ciphyreg.h
e1000phy.c	o Add support code for newer Marvell PHYs.	2006-12-11 11:09:48 +00:00
e1000phyreg.h	Add additional Marvell PHY registers.	2006-12-11 10:43:32 +00:00
exphy.c	- Take advantage of mii_phy_dev_probe().	2007-01-12 23:17:43 +00:00
gentbi.c	Add missing MIIBUS_MEDIAINIT() call.	2007-01-26 17:06:02 +00:00
inphy.c	Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table	2007-01-12 22:27:46 +00:00
inphyreg.h
ip1000phy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
ip1000phyreg.h	Add ip1000 PHY driver for IC Plus IP1000A integrated PHY.	2006-07-25 00:16:09 +00:00
lxtphy.c	Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table	2007-01-12 22:27:46 +00:00
lxtphyreg.h
mii_physubr.c	Remove mii_media_from_bmcr(); all previous users have been converted to	2007-01-13 00:14:45 +00:00
mii.c	- In miibus_attach() remove IFM_IMASK from the dontcare_mask of the	2007-01-20 00:55:03 +00:00
mii.h
miibus_if.m
miidevs	Restore support for the 5706C bce(4) phy that was broken during the	2007-02-21 18:17:44 +00:00
miivar.h	Remove mii_media_from_bmcr(); all previous users have been converted to	2007-01-13 00:14:45 +00:00
mlphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
nsgphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
nsgphyreg.h
nsphy.c	Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table	2007-01-12 22:27:46 +00:00
nsphyreg.h
pnaphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
qsphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
qsphyreg.h
rgephy.c	Correct the previous change:	2006-12-18 02:14:26 +00:00
rgephyreg.h
rlphy.c	Fix problem with RTL8201L PHY. From submitter:	2007-02-08 19:16:15 +00:00
rlswitch.c	MFp4: add basic driver for RTL8305SC switch in PHY emulation	2007-01-05 01:46:26 +00:00
ruephy.c	- Take advantage of mii_phy_dev_probe() and mii_phy_setmedia().	2007-01-13 00:06:41 +00:00
ruephyreg.h
tdkphy.c	- Don't set MIIF_NOISOLATE so tdkphy(4) can be used in configurations	2006-12-02 20:16:45 +00:00
tdkphyreg.h
tlphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
tlphyreg.h
ukphy_subr.c	If the PHY has 1000BASE-T capability, check to see if a 1000BASE-T speed	2006-05-19 03:51:42 +00:00
ukphy.c	- Don't set MIIF_NOISOLATE so ukphy(4) can be used in configurations with	2007-01-20 00:52:29 +00:00
xmphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
xmphyreg.h