freebsd-dev/sys/dev/qlxgb/qla_reg.h
David C Somayajulu 088fc97186 1. Updated Copyright Information
2. Added Flash Read/Update Support
3. Fixed TSO Handling

Submitted by: David C Somayajulu (davidcs@freebsd.org)
Reviewed by: George Neville-Neil (gnn@freebsd.org)
Approved by: George Neville-Neil (gnn@freebsd.org)
2013-05-07 22:58:42 +00:00

253 lines
7.4 KiB
C

/*
* Copyright (c) 2011-2013 Qlogic Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* File: qla_reg.h
* Author : David C Somayajulu, Qlogic Corporation, Aliso Viejo, CA 92656.
*/
#ifndef _QLA_REG_H_
#define _QLA_REG_H_
/*
* Begin Definitions for QLA82xx Registers
*/
/*
* Register offsets for QLA8022
*/
/******************************
* PCIe Registers
******************************/
#define Q8_CRB_WINDOW_2M 0x130060
#define Q8_INT_VECTOR 0x130100
#define Q8_INT_MASK 0x130104
#define Q8_INT_TARGET_STATUS_F0 0x130118
#define Q8_INT_TARGET_MASK_F0 0x130128
#define Q8_INT_TARGET_STATUS_F1 0x130160
#define Q8_INT_TARGET_MASK_F1 0x130170
#define Q8_INT_TARGET_STATUS_F2 0x130164
#define Q8_INT_TARGET_MASK_F2 0x130174
#define Q8_INT_TARGET_STATUS_F3 0x130168
#define Q8_INT_TARGET_MASK_F3 0x130178
#define Q8_INT_TARGET_STATUS_F4 0x130360
#define Q8_INT_TARGET_MASK_F4 0x130370
#define Q8_INT_TARGET_STATUS_F5 0x130364
#define Q8_INT_TARGET_MASK_F5 0x130374
#define Q8_INT_TARGET_STATUS_F6 0x130368
#define Q8_INT_TARGET_MASK_F6 0x130378
#define Q8_INT_TARGET_STATUS_F7 0x13036C
#define Q8_INT_TARGET_MASK_F7 0x13037C
#define Q8_SEM2_LOCK 0x13C010
#define Q8_SEM2_UNLOCK 0x13C014
#define Q8_SEM3_LOCK 0x13C018
#define Q8_SEM3_UNLOCK 0x13C01C
#define Q8_SEM5_LOCK 0x13C028
#define Q8_SEM5_UNLOCK 0x13C02C
#define Q8_SEM7_LOCK 0x13C038
#define Q8_SEM7_UNLOCK 0x13C03C
/* Valid bit for a SEM<N>_LOCK registers */
#define SEM_LOCK_BIT 0x00000001
#define Q8_ROM_LOCKID 0x1B2100
/*******************************
* Firmware Interface Registers
*******************************/
#define Q8_FW_VER_MAJOR 0x1B2150
#define Q8_FW_VER_MINOR 0x1B2154
#define Q8_FW_VER_SUB 0x1B2158
#define Q8_FW_VER_BUILD 0x1B2168
#define Q8_CMDPEG_STATE 0x1B2250
#define Q8_RCVPEG_STATE 0x1B233C
/*
* definitions for Q8_CMDPEG_STATE
*/
#define CMDPEG_PHAN_INIT_COMPLETE 0xFF01
#define Q8_ROM_STATUS 0x1A0004
/*
* definitions for Q8_ROM_STATUS
* bit definitions for Q8_UNM_ROMUSB_GLB_STATUS
* 31:3 Reserved; Rest as below
*/
#define ROM_STATUS_RDY 0x0004
#define ROM_STATUS_DONE 0x0002
#define ROM_STATUS_AUTO_ROM_SHDW 0x0001
#define Q8_ASIC_RESET 0x1A0008
/*
* definitions for Q8_ASIC_RESET
*/
#define ASIC_RESET_RST_XDMA 0x00800000 /* Reset XDMA */
#define ASIC_RESET_PEG_ICACHE 0x00000020 /* Reset PEG_ICACHE */
#define ASIC_RESET_PEG_DCACHE 0x00000010 /* Reset PEG_DCACHE */
#define ASIC_RESET_PEG_3 0x00000008 /* Reset PEG_3 */
#define ASIC_RESET_PEG_2 0x00000004 /* Reset PEG_2 */
#define ASIC_RESET_PEG_1 0x00000002 /* Reset PEG_1 */
#define ASIC_RESET_PEG_0 0x00000001 /* Reset PEG_0 */
#define Q8_COLD_BOOT 0x1B21FC
/*
* definitions for Q8_COLD_BOOT
*/
#define COLD_BOOT_VALUE 0x12345678
#define Q8_MIU_TEST_AGT_CTRL 0x180090
#define Q8_MIU_TEST_AGT_ADDR_LO 0x180094
#define Q8_MIU_TEST_AGT_ADDR_HI 0x180098
#define Q8_MIU_TEST_AGT_WRDATA_LO 0x1800A0
#define Q8_MIU_TEST_AGT_WRDATA_HI 0x1800A4
#define Q8_MIU_TEST_AGT_RDDATA_LO 0x1800A8
#define Q8_MIU_TEST_AGT_RDDATA_HI 0x1800AC
#define Q8_MIU_TEST_AGT_WRDATA_ULO 0x1800B0
#define Q8_MIU_TEST_AGT_WRDATA_UHI 0x1800B4
#define Q8_MIU_TEST_AGT_RDDATA_ULO 0x1800B8
#define Q8_MIU_TEST_AGT_RDDATA_UHI 0x1800BC
#define Q8_PEG_0_RESET 0x160018
#define Q8_PEG_0_CLR1 0x160008
#define Q8_PEG_0_CLR2 0x16000C
#define Q8_PEG_1_CLR1 0x161008
#define Q8_PEG_1_CLR2 0x16100C
#define Q8_PEG_2_CLR1 0x162008
#define Q8_PEG_2_CLR2 0x16200C
#define Q8_PEG_3_CLR1 0x163008
#define Q8_PEG_3_CLR2 0x16300C
#define Q8_PEG_4_CLR1 0x164008
#define Q8_PEG_4_CLR2 0x16400C
#define Q8_PEG_D_RESET1 0x1650EC
#define Q8_PEG_D_RESET2 0x16504C
#define Q8_PEG_HALT_STATUS1 0x1B20A8
#define Q8_PEG_HALT_STATUS2 0x1B20AC
#define Q8_FIRMWARE_HEARTBEAT 0x1B20B0
#define Q8_PEG_I_RESET 0x16604C
#define Q8_CRB_MAC_BLOCK_START 0x1B21C0
/***************************************************
* Flash ROM Access Registers ( Indirect Registers )
***************************************************/
#define Q8_ROM_INSTR_OPCODE 0x03310004
/*
* bit definitions for Q8_ROM_INSTR_OPCODE
* 31:8 Reserved; Rest Below
*/
#define ROM_OPCODE_WR_STATUS_REG 0x01
#define ROM_OPCODE_PROG_PAGE 0x02
#define ROM_OPCODE_RD_BYTE 0x03
#define ROM_OPCODE_WR_DISABLE 0x04
#define ROM_OPCODE_RD_STATUS_REG 0x05
#define ROM_OPCODE_WR_ENABLE 0x06
#define ROM_OPCODE_FAST_RD 0x0B
#define ROM_OPCODE_REL_DEEP_PWR_DWN 0xAB
#define ROM_OPCODE_BULK_ERASE 0xC7
#define ROM_OPCODE_DEEP_PWR_DWN 0xC9
#define ROM_OPCODE_SECTOR_ERASE 0xD8
#define Q8_ROM_ADDRESS 0x03310008
/*
* bit definitions for Q8_ROM_ADDRESS
* 31:24 Reserved;
* 23:0 Physical ROM Address in bytes
*/
#define Q8_ROM_ADDR_BYTE_COUNT 0x03310010
/*
* bit definitions for Q8_ROM_ADDR_BYTE_COUNT
* 31:2 Reserved;
* 1:0 max address bytes for ROM Interface
*/
#define Q8_ROM_DUMMY_BYTE_COUNT 0x03310014
/*
* bit definitions for Q8_ROM_DUMMY_BYTE_COUNT
* 31:2 Reserved;
* 1:0 dummy bytes for ROM Instructions
*/
#define Q8_ROM_RD_DATA 0x03310018
#define Q8_ROM_WR_DATA 0x0331000C
#define Q8_ROM_DIRECT_WINDOW 0x03310030
#define Q8_ROM_DIRECT_DATA_OFFSET 0x03310000
#define Q8_NX_CDRP_CMD_RSP 0x1B2218
#define Q8_NX_CDRP_ARG1 0x1B221C
#define Q8_NX_CDRP_ARG2 0x1B2220
#define Q8_NX_CDRP_ARG3 0x1B2224
#define Q8_NX_CDRP_SIGNATURE 0x1B2228
#define Q8_LINK_STATE 0x1B2298
#define Q8_LINK_SPEED_0 0x1B22E8
/*
* Macros for reading and writing registers
*/
#if defined(__i386__) || defined(__amd64__)
#define Q8_MB() __asm volatile("mfence" ::: "memory")
#define Q8_WMB() __asm volatile("sfence" ::: "memory")
#define Q8_RMB() __asm volatile("lfence" ::: "memory")
#else
#define Q8_MB()
#define Q8_WMB()
#define Q8_RMB()
#endif
#define READ_REG32(ha, reg) bus_read_4((ha->pci_reg), reg)
#define READ_OFFSET32(ha, off) READ_REG32(ha, off)
#define WRITE_REG32(ha, reg, val) \
{\
bus_write_4((ha->pci_reg), reg, val);\
bus_read_4((ha->pci_reg), reg);\
}
#define WRITE_REG32_MB(ha, reg, val) \
{\
Q8_WMB();\
bus_write_4((ha->pci_reg), reg, val);\
}
#define WRITE_OFFSET32(ha, off, val)\
{\
bus_write_4((ha->pci_reg), off, val);\
bus_read_4((ha->pci_reg), off);\
}
#endif /* #ifndef _QLA_REG_H_ */