freebsd-dev/sys/mips/atheros/ar71xx_cpudef.h
Adrian Chadd 0e69f431d4 Begin fleshing out MII clock rate configuration changes.
These are needed for some particular port configurations where the default
speed isn't suitable for all link speed types. (Ie, changing 10/100/1000MBit
PLL rate requires a similar MII clock rate, rather than a fixed MII rate.)

This is:

* only currently implemented for the ar71xx;
* isn't used anywhere (yet), as the final interface for this hasn't yet
  been determined.
2012-03-17 07:25:23 +00:00

118 lines
3.7 KiB
C

/*-
* Copyright (c) 2010 Adrian Chadd
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* $FreeBSD$ */
#ifndef __AR71XX_CPUDEF_H__
#define __AR71XX_CPUDEF_H__
struct ar71xx_cpu_def {
void (* detect_mem_size) (void);
void (* detect_sys_frequency) (void);
void (* ar71xx_chip_device_stop) (uint32_t);
void (* ar71xx_chip_device_start) (uint32_t);
int (* ar71xx_chip_device_stopped) (uint32_t);
void (* ar71xx_chip_set_pll_ge) (int, int);
void (* ar71xx_chip_set_mii_speed) (uint32_t, uint32_t);
void (* ar71xx_chip_ddr_flush_ge) (int);
uint32_t (* ar71xx_chip_get_eth_pll) (unsigned int, int);
/*
* From Linux - Handling this IRQ is a bit special.
* AR71xx - AR71XX_DDR_REG_FLUSH_PCI
* AR724x - AR724X_DDR_REG_FLUSH_PCIE
* AR91xx - AR91XX_DDR_REG_FLUSH_WMAC
*
* These are set when STATUSF_IP2 is set in regiser c0.
* This flush is done before the IRQ is handled to make
* sure the driver correctly sees any memory updates.
*/
void (* ar71xx_chip_ddr_flush_ip2) (void);
/*
* The USB peripheral init code is subtly different for
* each chip.
*/
void (* ar71xx_chip_init_usb_peripheral) (void);
};
extern struct ar71xx_cpu_def * ar71xx_cpu_ops;
static inline void ar71xx_detect_sys_frequency(void)
{
ar71xx_cpu_ops->detect_sys_frequency();
}
static inline void ar71xx_device_stop(uint32_t mask)
{
ar71xx_cpu_ops->ar71xx_chip_device_stop(mask);
}
static inline void ar71xx_device_start(uint32_t mask)
{
ar71xx_cpu_ops->ar71xx_chip_device_start(mask);
}
static inline int ar71xx_device_stopped(uint32_t mask)
{
return ar71xx_cpu_ops->ar71xx_chip_device_stopped(mask);
}
static inline void ar71xx_device_set_pll_ge(int unit, int speed)
{
ar71xx_cpu_ops->ar71xx_chip_set_pll_ge(unit, speed);
}
static inline void ar71xx_device_set_mii_speed(int unit, int speed)
{
ar71xx_cpu_ops->ar71xx_chip_set_mii_speed(unit, speed);
}
static inline void ar71xx_device_flush_ddr_ge(int unit)
{
ar71xx_cpu_ops->ar71xx_chip_ddr_flush_ge(unit);
}
static inline void ar71xx_init_usb_peripheral(void)
{
ar71xx_cpu_ops->ar71xx_chip_init_usb_peripheral();
}
static inline void ar71xx_device_ddr_flush_ip2(void)
{
ar71xx_cpu_ops->ar71xx_chip_ddr_flush_ip2();
}
/* XXX shouldn't be here! */
extern uint32_t u_ar71xx_cpu_freq;
extern uint32_t u_ar71xx_ahb_freq;
extern uint32_t u_ar71xx_ddr_freq;
static inline uint64_t ar71xx_cpu_freq(void) { return u_ar71xx_cpu_freq; }
static inline uint64_t ar71xx_ahb_freq(void) { return u_ar71xx_ahb_freq; }
static inline uint64_t ar71xx_ddr_freq(void) { return u_ar71xx_ddr_freq; }
#endif