b628bdccce
Change default regulatory domain from DEBUG (no limitations; exposes all device channels) to FCC; as a result, newly created wireless interface with default settings will have less chances to violate country-specific regulations. This change will not affect drivers with pre-initialized regdomain structure (currentry ath(4) and mwl(4)); in that case, the default channel list must correspond to the default regdomain / country setting. You can switch to another regdomain / country via corresponding ifconfig(8) options; the driver must implement ic_getradiocaps() method to restore full channel list. Full country / regdomain list may be obtained via 'ifconfig <iface> list countries' command. Example: change country to Germany: ifconfig wlan0 down # all wlans on the device must be down ifconfig wlan0 country DE ifconfig wlan0 up # wpa_supplicant(8), dhclient(8) etc At the creation time: ifconfig wlan0 create wlandev wpi0 country DE To make changes permanent add the following line to the rc.conf(5): create_args_wlan0="country DE" Tested with - Intel 3945BG (wpi(4)). - WUSB54GC (rum(4)). Reviewed by: adrian Relnotes: yes Differential Revision: https://reviews.freebsd.org/D6228
450 lines
13 KiB
C
450 lines
13 KiB
C
/*-
|
|
* Copyright (c) 2005-2008 Sam Leffler, Errno Consulting
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* IEEE 802.11 regdomain support.
|
|
*/
|
|
#include "opt_wlan.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_var.h>
|
|
#include <net/if_media.h>
|
|
#include <net/ethernet.h>
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
#include <net80211/ieee80211_regdomain.h>
|
|
|
|
static void
|
|
null_getradiocaps(struct ieee80211com *ic, int maxchan,
|
|
int *n, struct ieee80211_channel *c)
|
|
{
|
|
/* just feed back the current channel list */
|
|
if (maxchan > ic->ic_nchans)
|
|
maxchan = ic->ic_nchans;
|
|
memcpy(c, ic->ic_channels, maxchan*sizeof(struct ieee80211_channel));
|
|
*n = maxchan;
|
|
}
|
|
|
|
static int
|
|
null_setregdomain(struct ieee80211com *ic,
|
|
struct ieee80211_regdomain *rd,
|
|
int nchans, struct ieee80211_channel chans[])
|
|
{
|
|
return 0; /* accept anything */
|
|
}
|
|
|
|
void
|
|
ieee80211_regdomain_attach(struct ieee80211com *ic)
|
|
{
|
|
if (ic->ic_regdomain.regdomain == 0 &&
|
|
ic->ic_regdomain.country == CTRY_DEFAULT) {
|
|
ic->ic_regdomain.location = ' '; /* both */
|
|
/* NB: driver calls ieee80211_init_channels or similar */
|
|
}
|
|
ic->ic_getradiocaps = null_getradiocaps;
|
|
ic->ic_setregdomain = null_setregdomain;
|
|
}
|
|
|
|
void
|
|
ieee80211_regdomain_detach(struct ieee80211com *ic)
|
|
{
|
|
if (ic->ic_countryie != NULL) {
|
|
IEEE80211_FREE(ic->ic_countryie, M_80211_NODE_IE);
|
|
ic->ic_countryie = NULL;
|
|
}
|
|
}
|
|
|
|
void
|
|
ieee80211_regdomain_vattach(struct ieee80211vap *vap)
|
|
{
|
|
}
|
|
|
|
void
|
|
ieee80211_regdomain_vdetach(struct ieee80211vap *vap)
|
|
{
|
|
}
|
|
|
|
static const uint8_t def_chan_2ghz[] =
|
|
{ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 };
|
|
static const uint8_t def_chan_5ghz_band1[] =
|
|
{ 36, 40, 44, 48, 52, 56, 60, 64 };
|
|
static const uint8_t def_chan_5ghz_band2[] =
|
|
{ 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 };
|
|
static const uint8_t def_chan_5ghz_band3[] =
|
|
{ 149, 153, 157, 161 };
|
|
|
|
/*
|
|
* Setup the channel list for the specified regulatory domain,
|
|
* country code, and operating modes. This interface is used
|
|
* when a driver does not obtain the channel list from another
|
|
* source (such as firmware).
|
|
*/
|
|
int
|
|
ieee80211_init_channels(struct ieee80211com *ic,
|
|
const struct ieee80211_regdomain *rd, const uint8_t bands[])
|
|
{
|
|
struct ieee80211_channel *chans = ic->ic_channels;
|
|
int *nchans = &ic->ic_nchans;
|
|
int ht40;
|
|
|
|
/* XXX just do something for now */
|
|
ht40 = !!(ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40);
|
|
*nchans = 0;
|
|
if (isset(bands, IEEE80211_MODE_11B) ||
|
|
isset(bands, IEEE80211_MODE_11G) ||
|
|
isset(bands, IEEE80211_MODE_11NG)) {
|
|
int nchan = nitems(def_chan_2ghz);
|
|
if (!(rd != NULL && rd->ecm))
|
|
nchan -= 3;
|
|
|
|
ieee80211_add_channel_list_2ghz(chans, IEEE80211_CHAN_MAX,
|
|
nchans, def_chan_2ghz, nchan, bands, ht40);
|
|
}
|
|
if (isset(bands, IEEE80211_MODE_11A) ||
|
|
isset(bands, IEEE80211_MODE_11NA)) {
|
|
ieee80211_add_channel_list_5ghz(chans, IEEE80211_CHAN_MAX,
|
|
nchans, def_chan_5ghz_band1, nitems(def_chan_5ghz_band1),
|
|
bands, ht40);
|
|
ieee80211_add_channel_list_5ghz(chans, IEEE80211_CHAN_MAX,
|
|
nchans, def_chan_5ghz_band2, nitems(def_chan_5ghz_band2),
|
|
bands, ht40);
|
|
ieee80211_add_channel_list_5ghz(chans, IEEE80211_CHAN_MAX,
|
|
nchans, def_chan_5ghz_band3, nitems(def_chan_5ghz_band3),
|
|
bands, ht40);
|
|
}
|
|
if (rd != NULL)
|
|
ic->ic_regdomain = *rd;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __inline int
|
|
chancompar(const void *a, const void *b)
|
|
{
|
|
const struct ieee80211_channel *ca = a;
|
|
const struct ieee80211_channel *cb = b;
|
|
|
|
return (ca->ic_freq == cb->ic_freq) ?
|
|
(ca->ic_flags & IEEE80211_CHAN_ALL) -
|
|
(cb->ic_flags & IEEE80211_CHAN_ALL) :
|
|
ca->ic_freq - cb->ic_freq;
|
|
}
|
|
|
|
/*
|
|
* Insertion sort.
|
|
*/
|
|
#define swap(_a, _b, _size) { \
|
|
uint8_t *s = _b; \
|
|
int i = _size; \
|
|
do { \
|
|
uint8_t tmp = *_a; \
|
|
*_a++ = *s; \
|
|
*s++ = tmp; \
|
|
} while (--i); \
|
|
_a -= _size; \
|
|
}
|
|
|
|
static void
|
|
sort_channels(void *a, size_t n, size_t size)
|
|
{
|
|
uint8_t *aa = a;
|
|
uint8_t *ai, *t;
|
|
|
|
KASSERT(n > 0, ("no channels"));
|
|
for (ai = aa+size; --n >= 1; ai += size)
|
|
for (t = ai; t > aa; t -= size) {
|
|
uint8_t *u = t - size;
|
|
if (chancompar(u, t) <= 0)
|
|
break;
|
|
swap(u, t, size);
|
|
}
|
|
}
|
|
#undef swap
|
|
|
|
/*
|
|
* Order channels w/ the same frequency so that
|
|
* b < g < htg and a < hta. This is used to optimize
|
|
* channel table lookups and some user applications
|
|
* may also depend on it (though they should not).
|
|
*/
|
|
void
|
|
ieee80211_sort_channels(struct ieee80211_channel chans[], int nchans)
|
|
{
|
|
if (nchans > 0)
|
|
sort_channels(chans, nchans, sizeof(struct ieee80211_channel));
|
|
}
|
|
|
|
/*
|
|
* Allocate and construct a Country Information IE.
|
|
*/
|
|
struct ieee80211_appie *
|
|
ieee80211_alloc_countryie(struct ieee80211com *ic)
|
|
{
|
|
#define CHAN_UNINTERESTING \
|
|
(IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO | \
|
|
IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER)
|
|
/* XXX what about auto? */
|
|
/* flag set of channels to be excluded (band added below) */
|
|
static const int skipflags[IEEE80211_MODE_MAX] = {
|
|
[IEEE80211_MODE_AUTO] = CHAN_UNINTERESTING,
|
|
[IEEE80211_MODE_11A] = CHAN_UNINTERESTING,
|
|
[IEEE80211_MODE_11B] = CHAN_UNINTERESTING,
|
|
[IEEE80211_MODE_11G] = CHAN_UNINTERESTING,
|
|
[IEEE80211_MODE_FH] = CHAN_UNINTERESTING
|
|
| IEEE80211_CHAN_OFDM
|
|
| IEEE80211_CHAN_CCK
|
|
| IEEE80211_CHAN_DYN,
|
|
[IEEE80211_MODE_TURBO_A] = CHAN_UNINTERESTING,
|
|
[IEEE80211_MODE_TURBO_G] = CHAN_UNINTERESTING,
|
|
[IEEE80211_MODE_STURBO_A] = CHAN_UNINTERESTING,
|
|
[IEEE80211_MODE_HALF] = IEEE80211_CHAN_TURBO
|
|
| IEEE80211_CHAN_STURBO,
|
|
[IEEE80211_MODE_QUARTER] = IEEE80211_CHAN_TURBO
|
|
| IEEE80211_CHAN_STURBO,
|
|
[IEEE80211_MODE_11NA] = CHAN_UNINTERESTING,
|
|
[IEEE80211_MODE_11NG] = CHAN_UNINTERESTING,
|
|
};
|
|
const struct ieee80211_regdomain *rd = &ic->ic_regdomain;
|
|
uint8_t nextchan, chans[IEEE80211_CHAN_BYTES], *frm;
|
|
struct ieee80211_appie *aie;
|
|
struct ieee80211_country_ie *ie;
|
|
int i, skip, nruns;
|
|
|
|
aie = IEEE80211_MALLOC(IEEE80211_COUNTRY_MAX_SIZE, M_80211_NODE_IE,
|
|
IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
|
|
if (aie == NULL) {
|
|
ic_printf(ic, "%s: unable to allocate memory for country ie\n",
|
|
__func__);
|
|
/* XXX stat */
|
|
return NULL;
|
|
}
|
|
ie = (struct ieee80211_country_ie *) aie->ie_data;
|
|
ie->ie = IEEE80211_ELEMID_COUNTRY;
|
|
if (rd->isocc[0] == '\0') {
|
|
ic_printf(ic, "no ISO country string for cc %d; using blanks\n",
|
|
rd->country);
|
|
ie->cc[0] = ie->cc[1] = ' ';
|
|
} else {
|
|
ie->cc[0] = rd->isocc[0];
|
|
ie->cc[1] = rd->isocc[1];
|
|
}
|
|
/*
|
|
* Indoor/Outdoor portion of country string:
|
|
* 'I' indoor only
|
|
* 'O' outdoor only
|
|
* ' ' all environments
|
|
*/
|
|
ie->cc[2] = (rd->location == 'I' ? 'I' :
|
|
rd->location == 'O' ? 'O' : ' ');
|
|
/*
|
|
* Run-length encoded channel+max tx power info.
|
|
*/
|
|
frm = (uint8_t *)&ie->band[0];
|
|
nextchan = 0; /* NB: impossible channel # */
|
|
nruns = 0;
|
|
memset(chans, 0, sizeof(chans));
|
|
skip = skipflags[ieee80211_chan2mode(ic->ic_bsschan)];
|
|
if (IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan))
|
|
skip |= IEEE80211_CHAN_2GHZ;
|
|
else if (IEEE80211_IS_CHAN_2GHZ(ic->ic_bsschan))
|
|
skip |= IEEE80211_CHAN_5GHZ;
|
|
for (i = 0; i < ic->ic_nchans; i++) {
|
|
const struct ieee80211_channel *c = &ic->ic_channels[i];
|
|
|
|
if (isset(chans, c->ic_ieee)) /* suppress dup's */
|
|
continue;
|
|
if (c->ic_flags & skip) /* skip band, etc. */
|
|
continue;
|
|
setbit(chans, c->ic_ieee);
|
|
if (c->ic_ieee != nextchan ||
|
|
c->ic_maxregpower != frm[-1]) { /* new run */
|
|
if (nruns == IEEE80211_COUNTRY_MAX_BANDS) {
|
|
ic_printf(ic, "%s: country ie too big, "
|
|
"runs > max %d, truncating\n",
|
|
__func__, IEEE80211_COUNTRY_MAX_BANDS);
|
|
/* XXX stat? fail? */
|
|
break;
|
|
}
|
|
frm[0] = c->ic_ieee; /* starting channel # */
|
|
frm[1] = 1; /* # channels in run */
|
|
frm[2] = c->ic_maxregpower; /* tx power cap */
|
|
frm += 3;
|
|
nextchan = c->ic_ieee + 1; /* overflow? */
|
|
nruns++;
|
|
} else { /* extend run */
|
|
frm[-2]++;
|
|
nextchan++;
|
|
}
|
|
}
|
|
ie->len = frm - ie->cc;
|
|
if (ie->len & 1) { /* Zero pad to multiple of 2 */
|
|
ie->len++;
|
|
*frm++ = 0;
|
|
}
|
|
aie->ie_len = frm - aie->ie_data;
|
|
|
|
return aie;
|
|
#undef CHAN_UNINTERESTING
|
|
}
|
|
|
|
static int
|
|
allvapsdown(struct ieee80211com *ic)
|
|
{
|
|
struct ieee80211vap *vap;
|
|
|
|
IEEE80211_LOCK_ASSERT(ic);
|
|
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
|
|
if (vap->iv_state != IEEE80211_S_INIT)
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
ieee80211_setregdomain(struct ieee80211vap *vap,
|
|
struct ieee80211_regdomain_req *reg)
|
|
{
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
struct ieee80211_channel *c;
|
|
int desfreq = 0, desflags = 0; /* XXX silence gcc complaint */
|
|
int error, i;
|
|
|
|
if (reg->rd.location != 'I' && reg->rd.location != 'O' &&
|
|
reg->rd.location != ' ') {
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL,
|
|
"%s: invalid location 0x%x\n", __func__, reg->rd.location);
|
|
return EINVAL;
|
|
}
|
|
if (reg->rd.isocc[0] == '\0' || reg->rd.isocc[1] == '\0') {
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL,
|
|
"%s: invalid iso cc 0x%x:0x%x\n", __func__,
|
|
reg->rd.isocc[0], reg->rd.isocc[1]);
|
|
return EINVAL;
|
|
}
|
|
if (reg->chaninfo.ic_nchans > IEEE80211_CHAN_MAX) {
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL,
|
|
"%s: too many channels %u, max %u\n", __func__,
|
|
reg->chaninfo.ic_nchans, IEEE80211_CHAN_MAX);
|
|
return EINVAL;
|
|
}
|
|
/*
|
|
* Calculate freq<->IEEE mapping and default max tx power
|
|
* for channels not setup. The driver can override these
|
|
* setting to reflect device properties/requirements.
|
|
*/
|
|
for (i = 0; i < reg->chaninfo.ic_nchans; i++) {
|
|
c = ®->chaninfo.ic_chans[i];
|
|
if (c->ic_freq == 0 || c->ic_flags == 0) {
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL,
|
|
"%s: invalid channel spec at [%u]\n", __func__, i);
|
|
return EINVAL;
|
|
}
|
|
if (c->ic_maxregpower == 0) {
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL,
|
|
"%s: invalid channel spec, zero maxregpower, "
|
|
"freq %u flags 0x%x\n", __func__,
|
|
c->ic_freq, c->ic_flags);
|
|
return EINVAL;
|
|
}
|
|
if (c->ic_ieee == 0)
|
|
c->ic_ieee = ieee80211_mhz2ieee(c->ic_freq,c->ic_flags);
|
|
if (IEEE80211_IS_CHAN_HT40(c) && c->ic_extieee == 0)
|
|
c->ic_extieee = ieee80211_mhz2ieee(c->ic_freq +
|
|
(IEEE80211_IS_CHAN_HT40U(c) ? 20 : -20),
|
|
c->ic_flags);
|
|
if (c->ic_maxpower == 0)
|
|
c->ic_maxpower = 2*c->ic_maxregpower;
|
|
}
|
|
IEEE80211_LOCK(ic);
|
|
/* XXX bandaid; a running vap will likely crash */
|
|
if (!allvapsdown(ic)) {
|
|
IEEE80211_UNLOCK(ic);
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL,
|
|
"%s: reject: vaps are running\n", __func__);
|
|
return EBUSY;
|
|
}
|
|
error = ic->ic_setregdomain(ic, ®->rd,
|
|
reg->chaninfo.ic_nchans, reg->chaninfo.ic_chans);
|
|
if (error != 0) {
|
|
IEEE80211_UNLOCK(ic);
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL,
|
|
"%s: driver rejected request, error %u\n", __func__, error);
|
|
return error;
|
|
}
|
|
/*
|
|
* Commit: copy in new channel table and reset media state.
|
|
* On return the state machines will be clocked so all vaps
|
|
* will reset their state.
|
|
*
|
|
* XXX ic_bsschan is marked undefined, must have vap's in
|
|
* INIT state or we blow up forcing stations off
|
|
*/
|
|
/*
|
|
* Save any desired channel for restore below. Note this
|
|
* needs to be done for all vaps but for now we only do
|
|
* the one where the ioctl is issued.
|
|
*/
|
|
if (vap->iv_des_chan != IEEE80211_CHAN_ANYC) {
|
|
desfreq = vap->iv_des_chan->ic_freq;
|
|
desflags = vap->iv_des_chan->ic_flags;
|
|
}
|
|
/* regdomain parameters */
|
|
memcpy(&ic->ic_regdomain, ®->rd, sizeof(reg->rd));
|
|
/* channel table */
|
|
memcpy(ic->ic_channels, reg->chaninfo.ic_chans,
|
|
reg->chaninfo.ic_nchans * sizeof(struct ieee80211_channel));
|
|
ic->ic_nchans = reg->chaninfo.ic_nchans;
|
|
memset(&ic->ic_channels[ic->ic_nchans], 0,
|
|
(IEEE80211_CHAN_MAX - ic->ic_nchans) *
|
|
sizeof(struct ieee80211_channel));
|
|
ieee80211_chan_init(ic);
|
|
|
|
/*
|
|
* Invalidate channel-related state.
|
|
*/
|
|
if (ic->ic_countryie != NULL) {
|
|
IEEE80211_FREE(ic->ic_countryie, M_80211_NODE_IE);
|
|
ic->ic_countryie = NULL;
|
|
}
|
|
ieee80211_scan_flush(vap);
|
|
ieee80211_dfs_reset(ic);
|
|
if (vap->iv_des_chan != IEEE80211_CHAN_ANYC) {
|
|
c = ieee80211_find_channel(ic, desfreq, desflags);
|
|
/* NB: may be NULL if not present in new channel list */
|
|
vap->iv_des_chan = (c != NULL) ? c : IEEE80211_CHAN_ANYC;
|
|
}
|
|
IEEE80211_UNLOCK(ic);
|
|
|
|
return 0;
|
|
}
|