freebsd-dev/sys/dev
Gleb Smirnoff f25a8a0150 Add uep(4), driver for USB onscreen touch panel from eGalax.
The driver is stub. It just creates device entry and feeds
reassembled packets from hardware into it.

If in future we would port wsmouse(4) from NetBSD, or make
sysmouse(4) to support absolute motion events, then the driver
can be extended to act as system mouse. Meanwhile, it just
presents a /dev/uep0, that can be utilized by X driver, that
I am going to commit to ports tree soon.

The name for the driver is chosen to be the same as in NetBSD,
however, due to different USB stacks this driver isn't a port.
2010-05-25 21:20:56 +00:00
..
aac Use enums in the aac_command_status_table rather than duplicating the same 2010-04-13 12:10:55 +00:00
acpi_support
acpica Oops, HPET ID optionally stored in _UID, not in _ADR. 2010-05-23 08:31:15 +00:00
adb
adlink
advansys
ae Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
age With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify 2010-04-19 22:10:40 +00:00
agp Push down the acquisition of the page queues lock into vm_page_unwire(). 2010-05-05 03:45:46 +00:00
aha
ahb
ahci Fill rman range start/end values. It makes devinfo output more readable. 2010-05-22 08:30:47 +00:00
aic
aic7xxx
alc With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify 2010-04-19 22:10:40 +00:00
ale It seems ale(4) controllers do not like to see TCP payload in the 2010-04-26 21:08:15 +00:00
amd
amdsbwd
amdtemp
amr
an Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
arcmsr
asmc
asr
ata Report ATA/SATA channel number to NewBus at location string. 2010-05-22 07:32:47 +00:00
ath Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
atkbdc On certain chipsets AT keyboard controller isn't present and is 2010-04-29 06:16:00 +00:00
auxio
bce Add a fastpath to allocate from packet zone when using m_getjcl. 2010-05-07 22:09:17 +00:00
bfe
bge For the on-board interfaces found in Fujitsu SPARC64 machines obtain the 2010-04-26 18:56:06 +00:00
bktr Use standard types in preference to BSD types so that these header files 2010-03-28 00:10:09 +00:00
bm
buslogic
bwi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
bwn - fixes a bug that it didn't initialize the ratectl after association; 2010-05-15 21:18:15 +00:00
cardbus
cas - Don't set CAS_PCS_DATAPATH to anything except CAS_PCS_DATAPATH_SERDES 2010-05-03 20:57:16 +00:00
ce Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cfe
cfi
ciss Initialize the callout structure earlier in attach before calling any 2010-04-28 18:49:45 +00:00
cm Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cmx
coretemp
cp Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cpuctl
cpufreq
cs Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ct
ctau Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cxgb Remove invalid assertion. 2010-05-20 18:22:45 +00:00
cy
dc
dcons
de
digi
dpms
dpt
drm Push down the acquisition of the page queues lock into vm_page_unwire(). 2010-05-05 07:40:54 +00:00
e1000 Restore part of 200671 which was lost in previous driver changes: 2010-05-20 20:01:54 +00:00
ed Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
eisa
en
ep Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
esp Include <machine/ofw_machdep.h> for OF_getscsinitid(). 2010-05-10 20:02:39 +00:00
et
ex Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
exca
fatm
fb Restore the previous VESA mode after BIOS POST, just in case. 2010-05-18 22:30:55 +00:00
fdc
fe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
firewire Cast a bus_size_t to a (size_t) to use %zd specifier. Not quite the 2010-03-29 17:24:23 +00:00
flash
fxp If controller received bad frames make sure to update newly added 2010-05-14 17:39:28 +00:00
gem
glxsb
hatm
hifn
hme The NetBSD Foundation has granted permission to remove clause 3 and 4 from 2010-03-03 17:55:51 +00:00
hptiop
hptmv
hptrr
hwpmc When configuring a system-wide couting PMC, hwpmc was incorrectly logging process mappings for that PMC. Nothing ever reads pmc logs out of a counting PMC, so the log buffers were leaked when the PMC was deconfigured. The process mappings are only useful for sampling PMCs anyway, so only log the mappings if the PMC is a sampling PMC. 2010-05-01 22:04:58 +00:00
ic
ichsmb
ichwd
ida
ie Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ieee488
if_ndis
iicbus Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
iir
io - Extract the IODEV_PIO interface from ia64 and make it MI. 2010-04-28 15:38:01 +00:00
ipmi
ips
ipw Enable 5.5 and 11Mbit TX rates. 2010-05-11 17:14:17 +00:00
iscsi/initiator
isp Don't leak CCBs for every ABORT. 2010-05-25 20:19:45 +00:00
ispfw Don't spam dmesg with "registered firmware ..." when module is compiled 2010-03-05 03:37:42 +00:00
iwi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
iwn Add a workaround for a bug in the firmware regarding the transition 2010-05-06 17:53:04 +00:00
ixgb
ixgbe A few changes: 2010-05-19 00:03:48 +00:00
jme
joy
kbd
kbdmux
ksyms
le Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
led
lge
lindev
lmc
malo Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
mc146818
mca
mcd
md Lock the page around vm_page_activate() and vm_page_deactivate() calls 2010-05-03 20:31:13 +00:00
mem
mfi
mge
mii Add Marvell PHYG65G Gigabit PHY which is found on 88E8059 Yukon Optima. 2010-04-30 19:01:55 +00:00
mk48txx
mlx
mly
mmc Report relative card address to NewBus as location string. 2010-05-23 09:44:48 +00:00
mn
mpt Print IR_RESYNC updates informatively. 2010-05-02 22:48:27 +00:00
mse
msk When VLAN hardware tagging is disabled, make sure to disable VLAN 2010-05-04 22:24:19 +00:00
mvs Fill rman range start/end values. It makes devinfo output more readable. 2010-05-22 08:30:47 +00:00
mwl Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
mxge Add interrupt descriptions for mxge's msi-x vectors 2010-05-21 15:57:24 +00:00
my Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ncv
nfe With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify 2010-04-19 22:10:40 +00:00
nge
nmdm
nsp
null
nve
nvram
nxge Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ofw Pull OF_quiesce() out of the MI Open Firmware layer and entirely into 2010-05-16 22:01:43 +00:00
patm
pbio
pccard
pccbb
pcf
pci Honor hw.pci.do_power_nodriver on resume. Power-down devices without 2010-05-22 03:19:30 +00:00
pcn
pdq Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
powermac_nvram
ppbus Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ppc Add PCI ID for MCS9901's parallel port. 2010-03-23 20:08:18 +00:00
pst
pty
puc Add support for the Perle Speed4 LE. 2010-05-20 13:16:42 +00:00
quicc Remove a soft member which was never used. 2010-05-02 19:05:57 +00:00
ral Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
random
rc
re Don't change PCIe maximum read request size to 2048 on RTL810x 2010-05-07 23:05:27 +00:00
rndtest
rp
safe
sbni Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
scc
scd
sdhci
sec
sf
sge sge_encap() can sometimes return an error with m_head set to NULL. 2010-05-24 17:12:44 +00:00
si
siba Revert r204992 and just wrap it all in ifdef INVARIANTS to fix the debug and 2010-03-11 08:03:56 +00:00
siis Fill rman range start/end values. It makes devinfo output more readable. 2010-05-22 08:30:47 +00:00
sio
sis It's not necessary to reset the chip every time an input overflow event 2010-04-20 19:30:12 +00:00
sk
smbus
smc Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
sn Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snc Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snp
sound - Remove more dead code[1]. Since r207330, we only need to check division 2010-05-04 16:56:59 +00:00
speaker
spibus
ste
stg
stge
streams
sym - On sparc64 obtain the initiator ID from the Open Firmware device tree 2010-04-27 18:05:33 +00:00
syscons Suspend screen updates when the video controller is powered down. 2010-05-22 07:35:17 +00:00
tdfx
ti Neither the page lock nor the page queues lock is required to unwire and 2010-05-03 15:51:59 +00:00
tl
trm
tsec
twa
twe
tx
txp
uart Remove redundant checking of sc_leaving (uart_intr() already handles this). 2010-05-02 19:07:19 +00:00
ubsec Cast the bus_size_t to a intmax_t rather than assuming type-punning to 2010-03-29 17:26:24 +00:00
usb Add uep(4), driver for USB onscreen touch panel from eGalax. 2010-05-25 21:20:56 +00:00
utopia
vge
vkbd
vr
vx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
watchdog
wb
wds
wi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wl Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wpi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
xe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
xen Switch to our preferred 2-clause BSD license. 2010-05-05 20:39:02 +00:00
xl