273 lines
8.5 KiB
Plaintext
273 lines
8.5 KiB
Plaintext
#################################################################
|
|
#
|
|
# PPP Sample Configuration File
|
|
#
|
|
# Originally written by Toshiharu OHNO
|
|
#
|
|
# $Id: ppp.conf.sample,v 1.21 1997/11/08 20:58:39 brian Exp $
|
|
#
|
|
#################################################################
|
|
|
|
# This file is separated into sections. Each section is named with
|
|
# a label starting in column 0 and followed directly by a ``:''. The
|
|
# section continues until the next section. Blank lines and lines
|
|
# beginning with ``#'' are ignored.
|
|
#
|
|
# Lines beginning with "!include" will ``include'' another file. You
|
|
# may want to ``!include ~/.ppp.conf'' for backwards compatibility.
|
|
#
|
|
|
|
# Default setup. Always executed when PPP is invoked.
|
|
# This section is *not* loaded by the ``load'' or ``dial'' commands.
|
|
#
|
|
# This is the best place to specify your modem device, it's DTR rate,
|
|
# and any logging specification. Logging specs should be done first
|
|
# so that subsequent commands are logged.
|
|
#
|
|
default:
|
|
set log Phase Chat Connect Carrier LCP IPCP CCP tun command
|
|
set device /dev/cuaa1
|
|
set speed 115200
|
|
deny lqr
|
|
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
|
|
|
|
# Client side PPP
|
|
#
|
|
# Although the PPP protocol is a peer to peer protocol, we normally
|
|
# consider the side that makes the connection as the client and the
|
|
# side that receives the connection as the server. Authentication
|
|
# is required by the server either using a unix-style login proceedure
|
|
# or by demanding PAP or CHAP authentication from the client.
|
|
#
|
|
|
|
# An on demand example where we have dynamic IP addresses:
|
|
# If the peer assigns us an arbitrary IP (most ISPs do this) and we
|
|
# can't predict what their IP will be either, take a wild guess at
|
|
# some IPs that you can't currently route to. Ensure that the "delete"
|
|
# and "add" lines are also present in the pmdemand section of ppp.linkup
|
|
# so that when we connect, things will be put straight.
|
|
#
|
|
# This will work with static IP numbers too. You can also use this entry
|
|
# if you don't want on-demand dialup. The "set ifaddr", "delete" and
|
|
# "add" lines are required for on-demand. Note, for dynamic IP numbers,
|
|
# whether dialing manually or on demand, there should *always* be an entry
|
|
# in ppp.linkup.
|
|
#
|
|
# The /0 bit in "set ifaddr" says that we insist on 0 bits of the
|
|
# specified IP actually being correct, therefore, the other side can assign
|
|
# any IP numbers.
|
|
#
|
|
# The forth arg to "set ifaddr" makes us send "0.0.0.0" as our requested
|
|
# IP number, forcing the peer to make the decision.
|
|
#
|
|
pmdemand:
|
|
set phone 1234567
|
|
set login "TIMEOUT 5 ogin:--ogin: ppp word: ppp"
|
|
set timeout 120
|
|
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
|
|
delete ALL
|
|
add 0 0 HISADDR
|
|
|
|
# When we want to use PAP or CHAP instead of using a unix-style login
|
|
# proceedure, we do the following. Note, the peer suggests whether we
|
|
# should send PAP or CHAP. By default, we send whatever we're asked for.
|
|
#
|
|
PAPorCHAPpmdemand:
|
|
set phone 1234567
|
|
set login
|
|
set authname MyName
|
|
set authkey MyKey
|
|
set timeout 120
|
|
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
|
|
delete ALL
|
|
add 0 0 HISADDR
|
|
|
|
# On demand dialup example with static IP addresses:
|
|
# Here, the local side uses 192.244.185.226 and the remote side
|
|
# uses 192.244.176.44.
|
|
#
|
|
# # ppp -auto ondemand
|
|
#
|
|
# It is not necessary to have an entry in ppp.linkup when both IP numbers
|
|
# are static. Be warned though, the MYADDR: label is executed from
|
|
# ppp.linkup if the "ondemand:" label is not found.
|
|
#
|
|
ondemand:
|
|
set phone 1234567
|
|
set login "TIMEOUT 5 ogin:--ogin: ppp word: ppp"
|
|
set timeout 120
|
|
set ifaddr 192.244.185.226 192.244.176.44 255.255.255.0
|
|
delete ALL
|
|
add 0 0 HISADDR
|
|
|
|
# Example segments
|
|
#
|
|
# The following lines may be included as part of your configuration
|
|
# section and aren't themselves complete. They're provided as examples
|
|
# of how to achieve different things.
|
|
|
|
# Multi-phone example. Numbers separated by a : are used sequentially.
|
|
# Numbers separated by a | are used if the previous dial or login script
|
|
# failed. Usually, you will prefer to use only one of | or :, but both
|
|
# are allowed.
|
|
#
|
|
set phone 12345678|12345679:12345670|12345671
|
|
#
|
|
# When in -auto, -ddial, -direct or -background mode, ppp can accept
|
|
# control instructions from the ``pppctl'' program. First, you must
|
|
# set up your control socket. It's safest to use a UNIX domain socket:
|
|
#
|
|
set server /var/run/internet 0660
|
|
#
|
|
# Although a TCP port may be used if you want to allow control
|
|
# connections from other machines:
|
|
#
|
|
set server 6670
|
|
#
|
|
# If we have a ``strange'' modem that must be re-initialized when we
|
|
# hangup:
|
|
#
|
|
set hangup "\"\" AT OK-AT-OK ATZ OK"
|
|
#
|
|
# To adjust logging withouth blasting the setting in default:
|
|
#
|
|
set log -command +tcp/ip
|
|
#
|
|
# To see log messages on the screen in interactive mode:
|
|
#
|
|
set log local LCP IPCP CCP
|
|
#
|
|
# If you're seeing a lot of magic number problems and failed connections,
|
|
# try this (check out the FAQ):
|
|
#
|
|
set openmode passive
|
|
#
|
|
# For noisy lines, we may want to reconnect (up to 20 times) after loss
|
|
# of carrier:
|
|
#
|
|
set reconnect 3 20
|
|
#
|
|
# When playing server for M$ clients, tell them who our name servers are:
|
|
#
|
|
set ns 10.0.0.1 10.0.0.2
|
|
set nbns 10.0.0.1 10.0.0.2
|
|
enable msext
|
|
#
|
|
# If we're using the -alias switch, redirect ftp and http to an internal
|
|
# machine:
|
|
#
|
|
alias port 10.0.0.2:ftp ftp
|
|
alias port 10.0.0.2:http http
|
|
#
|
|
# or don't trust the outside at all
|
|
#
|
|
alias deny_incoming yes
|
|
#
|
|
# If we don't want ICMP and DNS packets to keep the connection alive:
|
|
#
|
|
set afilter 0 deny icmp
|
|
set afilter 1 deny udp src eq 53
|
|
set afilter 2 deny udp dst eq 53
|
|
set afilter 3 permit 0/0 0/0
|
|
#
|
|
# And we don't want ICMPs to cause a dialup:
|
|
#
|
|
set dfilter 0 deny icmp
|
|
set dfilter 1 permit 0/0 0/0
|
|
#
|
|
# Once the line's up, allow connections for ident (113), telnet (23),
|
|
# ftp (20 & 21), DNS (53), my place of work (192.244.191.0/24),
|
|
# ICMP (ping) and traceroute (>33433).
|
|
#
|
|
# Anything else is blocked by default
|
|
#
|
|
set ifilter 0 permit tcp dst eq 113
|
|
set ofilter 0 permit tcp src eq 113
|
|
set ifilter 1 permit tcp src eq 23 estab
|
|
set ofilter 1 permit tcp dst eq 23
|
|
set ifilter 2 permit tcp src eq 21 estab
|
|
set ofilter 2 permit tcp dst eq 21
|
|
set ifilter 3 permit tcp src eq 20 dst gt 1023
|
|
set ofilter 3 permit tcp dst eq 20
|
|
set ifilter 4 permit udp src eq 53
|
|
set ofilter 4 permit udp dst eq 53
|
|
set ifilter 5 permit 192.244.191.0/24 0/0
|
|
set ofilter 5 permit 0/0 192.244.191.0/24
|
|
set ifilter 6 permit icmp
|
|
set ofilter 6 permit icmp
|
|
set ifilter 7 permit udp dst gt 33433
|
|
set ofilter 7 permit udp dst gt 33433
|
|
|
|
|
|
# Server side PPP
|
|
# If you want the remote system to authenticate itself, you insist
|
|
# that the peer uses CHAP (or PAP) with the "enable" keyword. Both CHAP and
|
|
# PAP are disabled by default (we usually only "enable" on of them if the
|
|
# other side is dialing into our server).
|
|
# When the peer authenticates itself, we use ppp.secret for verification.
|
|
#
|
|
# Ppp is launched with:
|
|
# # ppp -direct CHAPserver
|
|
#
|
|
# Note: We can supply a third field in ppp.secret specifying the IP address
|
|
# for that user.
|
|
#
|
|
CHAPserver:
|
|
enable chap
|
|
enable proxy
|
|
set ifaddr 192.244.176.44 292.244.184.31
|
|
|
|
# If we wish to act as a server, allowing PAP access according to
|
|
# accounts in /etc/passwd, we do this:
|
|
#
|
|
PAPServerwithPASSWD:
|
|
enable pap
|
|
enable passwdauth
|
|
enable proxy
|
|
set ifaddr 192.244.176.44 292.244.184.31
|
|
|
|
|
|
# Example to connect using a null-modem cable:
|
|
# The important thing here is to allow the lqr packets on both sides.
|
|
# Without them enabled, we can't tell if the line's dropped - there
|
|
# should always be carrier on a direct connection.
|
|
# Here, the server sends lqr's every 10 seconds and quits if three in a
|
|
# row fail.
|
|
#
|
|
# Make sure you don't have "deny lqr" in your default: on the client !
|
|
#
|
|
direct-client:
|
|
set dial ""
|
|
set line /dev/cuaa0
|
|
set sp 115200
|
|
set timeout 900 10 3
|
|
set log Phase Chat LQM
|
|
set login "TIMEOUT 5 ogin:--ogin: ppp word: ppp HELLO"
|
|
set ifaddr 10.0.4.2 10.0.4.1
|
|
enable lqr
|
|
accept lqr
|
|
|
|
direct-server:
|
|
set timeout 900 10 3
|
|
set log Phase LQM
|
|
set ifaddr 10.0.4.1 10.0.4.2
|
|
enable lqr
|
|
accept lqr
|
|
|
|
|
|
# Example for PPP over TCP.
|
|
# We assume that inetd on tcpsrv.mynet has been
|
|
# configured to run "ppp -direct tcp-server" when it gets a connection on
|
|
# port 1234. Read the man page for further details
|
|
#
|
|
tcp-client:
|
|
set device tcpsrv.mynet:1234
|
|
set dial
|
|
set login
|
|
set escape 0xff
|
|
set ifaddr 10.0.5.1 10.0.4.1 255.255.255.0
|
|
|
|
tcp-server:
|
|
set escape 0xff
|
|
set ifaddr 10.0.4.1 10.0.5.1 255.255.255.0
|