freebsd-dev/sys/cddl/dev/dtrace/amd64/dtrace_asm.S

574 lines
13 KiB
ArmAsm

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*
* Portions Copyright 2008 John Birrell <jb@freebsd.org>
*
* $FreeBSD$
*
*/
/*
* Copyright 2007 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
#define _ASM
#include <machine/asmacros.h>
#include <sys/cpuvar_defs.h>
#include <sys/dtrace.h>
#include "assym.s"
#define INTR_POP \
MEXITCOUNT; \
movq TF_RDI(%rsp),%rdi; \
movq TF_RSI(%rsp),%rsi; \
movq TF_RDX(%rsp),%rdx; \
movq TF_RCX(%rsp),%rcx; \
movq TF_R8(%rsp),%r8; \
movq TF_R9(%rsp),%r9; \
movq TF_RAX(%rsp),%rax; \
movq TF_RBX(%rsp),%rbx; \
movq TF_RBP(%rsp),%rbp; \
movq TF_R10(%rsp),%r10; \
movq TF_R11(%rsp),%r11; \
movq TF_R12(%rsp),%r12; \
movq TF_R13(%rsp),%r13; \
movq TF_R14(%rsp),%r14; \
movq TF_R15(%rsp),%r15; \
testb $SEL_RPL_MASK,TF_CS(%rsp); \
jz 1f; \
cli; \
swapgs; \
1: addq $TF_RIP,%rsp;
.globl calltrap
.type calltrap,@function
ENTRY(dtrace_invop_start)
/*
* #BP traps with %rip set to the next address. We need to decrement
* the value to indicate the address of the int3 (0xcc) instruction
* that we substituted.
*/
movq TF_RIP(%rsp), %rdi
decq %rdi
movq TF_RSP(%rsp), %rsi
movq TF_RAX(%rsp), %rdx
pushq (%rsi)
movq %rsp, %rsi
call dtrace_invop
ALTENTRY(dtrace_invop_callsite)
addq $8, %rsp
cmpl $DTRACE_INVOP_PUSHL_EBP, %eax
je bp_push
cmpl $DTRACE_INVOP_LEAVE, %eax
je bp_leave
cmpl $DTRACE_INVOP_NOP, %eax
je bp_nop
cmpl $DTRACE_INVOP_RET, %eax
je bp_ret
/* When all else fails handle the trap in the usual way. */
jmpq *dtrace_invop_calltrap_addr
bp_push:
/*
* We must emulate a "pushq %rbp". To do this, we pull the stack
* down 8 bytes, and then store the base pointer.
*/
INTR_POP
subq $16, %rsp /* make room for %rbp */
pushq %rax /* push temp */
movq 24(%rsp), %rax /* load calling RIP */
movq %rax, 8(%rsp) /* store calling RIP */
movq 32(%rsp), %rax /* load calling CS */
movq %rax, 16(%rsp) /* store calling CS */
movq 40(%rsp), %rax /* load calling RFLAGS */
movq %rax, 24(%rsp) /* store calling RFLAGS */
movq 48(%rsp), %rax /* load calling RSP */
subq $8, %rax /* make room for %rbp */
movq %rax, 32(%rsp) /* store calling RSP */
movq 56(%rsp), %rax /* load calling SS */
movq %rax, 40(%rsp) /* store calling SS */
movq 32(%rsp), %rax /* reload calling RSP */
movq %rbp, (%rax) /* store %rbp there */
popq %rax /* pop off temp */
iretq /* return from interrupt */
/*NOTREACHED*/
bp_leave:
/*
* We must emulate a "leave", which is the same as a "movq %rbp, %rsp"
* followed by a "popq %rbp". This is quite a bit simpler on amd64
* than it is on i386 -- we can exploit the fact that the %rsp is
* explicitly saved to effect the pop without having to reshuffle
* the other data pushed for the trap.
*/
INTR_POP
pushq %rax /* push temp */
movq 8(%rsp), %rax /* load calling RIP */
movq %rax, 8(%rsp) /* store calling RIP */
movq (%rbp), %rax /* get new %rbp */
addq $8, %rbp /* adjust new %rsp */
movq %rbp, 32(%rsp) /* store new %rsp */
movq %rax, %rbp /* set new %rbp */
popq %rax /* pop off temp */
iretq /* return from interrupt */
/*NOTREACHED*/
bp_nop:
/* We must emulate a "nop". */
INTR_POP
iretq
/*NOTREACHED*/
bp_ret:
INTR_POP
pushq %rax /* push temp */
movq 32(%rsp), %rax /* load %rsp */
movq (%rax), %rax /* load calling RIP */
movq %rax, 8(%rsp) /* store calling RIP */
addq $8, 32(%rsp) /* adjust new %rsp */
popq %rax /* pop off temp */
iretq /* return from interrupt */
/*NOTREACHED*/
END(dtrace_invop_start)
/*
void dtrace_invop_init(void)
*/
ENTRY(dtrace_invop_init)
movq $dtrace_invop_start, dtrace_invop_jump_addr(%rip)
ret
END(dtrace_invop_init)
/*
void dtrace_invop_uninit(void)
*/
ENTRY(dtrace_invop_uninit)
movq $0, dtrace_invop_jump_addr(%rip)
ret
END(dtrace_invop_uninit)
/*
greg_t dtrace_getfp(void)
*/
ENTRY(dtrace_getfp)
movq %rbp, %rax
ret
END(dtrace_getfp)
/*
uint32_t
dtrace_cas32(uint32_t *target, uint32_t cmp, uint32_t new)
*/
ENTRY(dtrace_cas32)
movl %esi, %eax
lock
cmpxchgl %edx, (%rdi)
ret
END(dtrace_cas32)
/*
void *
dtrace_casptr(void *target, void *cmp, void *new)
*/
ENTRY(dtrace_casptr)
movq %rsi, %rax
lock
cmpxchgq %rdx, (%rdi)
ret
END(dtrace_casptr)
/*
uintptr_t
dtrace_caller(int aframes)
*/
ENTRY(dtrace_caller)
movq $-1, %rax
ret
END(dtrace_caller)
/*
void
dtrace_copy(uintptr_t src, uintptr_t dest, size_t size)
*/
ENTRY(dtrace_copy)
pushq %rbp
movq %rsp, %rbp
xchgq %rdi, %rsi /* make %rsi source, %rdi dest */
movq %rdx, %rcx /* load count */
repz /* repeat for count ... */
smovb /* move from %ds:rsi to %ed:rdi */
leave
ret
END(dtrace_copy)
/*
void
dtrace_copystr(uintptr_t uaddr, uintptr_t kaddr, size_t size,
volatile uint16_t *flags)
*/
ENTRY(dtrace_copystr)
pushq %rbp
movq %rsp, %rbp
0:
movb (%rdi), %al /* load from source */
movb %al, (%rsi) /* store to destination */
addq $1, %rdi /* increment source pointer */
addq $1, %rsi /* increment destination pointer */
subq $1, %rdx /* decrement remaining count */
cmpb $0, %al
je 2f
testq $0xfff, %rdx /* test if count is 4k-aligned */
jnz 1f /* if not, continue with copying */
testq $CPU_DTRACE_BADADDR, (%rcx) /* load and test dtrace flags */
jnz 2f
1:
cmpq $0, %rdx
jne 0b
2:
leave
ret
END(dtrace_copystr)
/*
uintptr_t
dtrace_fulword(void *addr)
*/
ENTRY(dtrace_fulword)
movq (%rdi), %rax
ret
END(dtrace_fulword)
/*
uint8_t
dtrace_fuword8_nocheck(void *addr)
*/
ENTRY(dtrace_fuword8_nocheck)
xorq %rax, %rax
movb (%rdi), %al
ret
END(dtrace_fuword8_nocheck)
/*
uint16_t
dtrace_fuword16_nocheck(void *addr)
*/
ENTRY(dtrace_fuword16_nocheck)
xorq %rax, %rax
movw (%rdi), %ax
ret
END(dtrace_fuword16_nocheck)
/*
uint32_t
dtrace_fuword32_nocheck(void *addr)
*/
ENTRY(dtrace_fuword32_nocheck)
xorq %rax, %rax
movl (%rdi), %eax
ret
END(dtrace_fuword32_nocheck)
/*
uint64_t
dtrace_fuword64_nocheck(void *addr)
*/
ENTRY(dtrace_fuword64_nocheck)
movq (%rdi), %rax
ret
END(dtrace_fuword64_nocheck)
/*
void
dtrace_probe_error(dtrace_state_t *state, dtrace_epid_t epid, int which,
int fault, int fltoffs, uintptr_t illval)
*/
ENTRY(dtrace_probe_error)
pushq %rbp
movq %rsp, %rbp
subq $0x8, %rsp
movq %r9, (%rsp)
movq %r8, %r9
movq %rcx, %r8
movq %rdx, %rcx
movq %rsi, %rdx
movq %rdi, %rsi
movl dtrace_probeid_error(%rip), %edi
call dtrace_probe
addq $0x8, %rsp
leave
ret
END(dtrace_probe_error)
/*
void
dtrace_membar_producer(void)
*/
ENTRY(dtrace_membar_producer)
rep; ret /* use 2 byte return instruction when branch target */
/* AMD Software Optimization Guide - Section 6.2 */
END(dtrace_membar_producer)
/*
void
dtrace_membar_consumer(void)
*/
ENTRY(dtrace_membar_consumer)
rep; ret /* use 2 byte return instruction when branch target */
/* AMD Software Optimization Guide - Section 6.2 */
END(dtrace_membar_consumer)
/*
dtrace_icookie_t
dtrace_interrupt_disable(void)
*/
ENTRY(dtrace_interrupt_disable)
pushfq
popq %rax
cli
ret
END(dtrace_interrupt_disable)
/*
void
dtrace_interrupt_enable(dtrace_icookie_t cookie)
*/
ENTRY(dtrace_interrupt_enable)
pushq %rdi
popfq
ret
END(dtrace_interrupt_enable)
/*
* The panic() and cmn_err() functions invoke vpanic() as a common entry point
* into the panic code implemented in panicsys(). vpanic() is responsible
* for passing through the format string and arguments, and constructing a
* regs structure on the stack into which it saves the current register
* values. If we are not dying due to a fatal trap, these registers will
* then be preserved in panicbuf as the current processor state. Before
* invoking panicsys(), vpanic() activates the first panic trigger (see
* common/os/panic.c) and switches to the panic_stack if successful. Note that
* DTrace takes a slightly different panic path if it must panic from probe
* context. Instead of calling panic, it calls into dtrace_vpanic(), which
* sets up the initial stack as vpanic does, calls dtrace_panic_trigger(), and
* branches back into vpanic().
*/
/*
void
vpanic(const char *format, va_list alist)
*/
ENTRY(vpanic) /* Initial stack layout: */
pushq %rbp /* | %rip | 0x60 */
movq %rsp, %rbp /* | %rbp | 0x58 */
pushfq /* | rfl | 0x50 */
pushq %r11 /* | %r11 | 0x48 */
pushq %r10 /* | %r10 | 0x40 */
pushq %rbx /* | %rbx | 0x38 */
pushq %rax /* | %rax | 0x30 */
pushq %r9 /* | %r9 | 0x28 */
pushq %r8 /* | %r8 | 0x20 */
pushq %rcx /* | %rcx | 0x18 */
pushq %rdx /* | %rdx | 0x10 */
pushq %rsi /* | %rsi | 0x8 alist */
pushq %rdi /* | %rdi | 0x0 format */
movq %rsp, %rbx /* %rbx = current %rsp */
leaq panic_quiesce(%rip), %rdi /* %rdi = &panic_quiesce */
call panic_trigger /* %eax = panic_trigger() */
vpanic_common:
/*
* The panic_trigger result is in %eax from the call above, and
* dtrace_panic places it in %eax before branching here.
* The rdmsr instructions that follow below will clobber %eax so
* we stash the panic_trigger result in %r11d.
*/
movl %eax, %r11d
cmpl $0, %r11d
je 0f
/*
* If panic_trigger() was successful, we are the first to initiate a
* panic: we now switch to the reserved panic_stack before continuing.
*/
leaq panic_stack(%rip), %rsp
addq $PANICSTKSIZE, %rsp
0: subq $REGSIZE, %rsp
/*
* Now that we've got everything set up, store the register values as
* they were when we entered vpanic() to the designated location in
* the regs structure we allocated on the stack.
*/
#ifdef notyet
movq 0x0(%rbx), %rcx
movq %rcx, REGOFF_RDI(%rsp)
movq 0x8(%rbx), %rcx
movq %rcx, REGOFF_RSI(%rsp)
movq 0x10(%rbx), %rcx
movq %rcx, REGOFF_RDX(%rsp)
movq 0x18(%rbx), %rcx
movq %rcx, REGOFF_RCX(%rsp)
movq 0x20(%rbx), %rcx
movq %rcx, REGOFF_R8(%rsp)
movq 0x28(%rbx), %rcx
movq %rcx, REGOFF_R9(%rsp)
movq 0x30(%rbx), %rcx
movq %rcx, REGOFF_RAX(%rsp)
movq 0x38(%rbx), %rcx
movq %rcx, REGOFF_RBX(%rsp)
movq 0x58(%rbx), %rcx
movq %rcx, REGOFF_RBP(%rsp)
movq 0x40(%rbx), %rcx
movq %rcx, REGOFF_R10(%rsp)
movq 0x48(%rbx), %rcx
movq %rcx, REGOFF_R11(%rsp)
movq %r12, REGOFF_R12(%rsp)
movq %r13, REGOFF_R13(%rsp)
movq %r14, REGOFF_R14(%rsp)
movq %r15, REGOFF_R15(%rsp)
xorl %ecx, %ecx
movw %ds, %cx
movq %rcx, REGOFF_DS(%rsp)
movw %es, %cx
movq %rcx, REGOFF_ES(%rsp)
movw %fs, %cx
movq %rcx, REGOFF_FS(%rsp)
movw %gs, %cx
movq %rcx, REGOFF_GS(%rsp)
movq $0, REGOFF_TRAPNO(%rsp)
movq $0, REGOFF_ERR(%rsp)
leaq vpanic(%rip), %rcx
movq %rcx, REGOFF_RIP(%rsp)
movw %cs, %cx
movzwq %cx, %rcx
movq %rcx, REGOFF_CS(%rsp)
movq 0x50(%rbx), %rcx
movq %rcx, REGOFF_RFL(%rsp)
movq %rbx, %rcx
addq $0x60, %rcx
movq %rcx, REGOFF_RSP(%rsp)
movw %ss, %cx
movzwq %cx, %rcx
movq %rcx, REGOFF_SS(%rsp)
/*
* panicsys(format, alist, rp, on_panic_stack)
*/
movq REGOFF_RDI(%rsp), %rdi /* format */
movq REGOFF_RSI(%rsp), %rsi /* alist */
movq %rsp, %rdx /* struct regs */
movl %r11d, %ecx /* on_panic_stack */
call panicsys
addq $REGSIZE, %rsp
#endif
popq %rdi
popq %rsi
popq %rdx
popq %rcx
popq %r8
popq %r9
popq %rax
popq %rbx
popq %r10
popq %r11
popfq
leave
ret
END(vpanic)
/*
void
dtrace_vpanic(const char *format, va_list alist)
*/
ENTRY(dtrace_vpanic) /* Initial stack layout: */
pushq %rbp /* | %rip | 0x60 */
movq %rsp, %rbp /* | %rbp | 0x58 */
pushfq /* | rfl | 0x50 */
pushq %r11 /* | %r11 | 0x48 */
pushq %r10 /* | %r10 | 0x40 */
pushq %rbx /* | %rbx | 0x38 */
pushq %rax /* | %rax | 0x30 */
pushq %r9 /* | %r9 | 0x28 */
pushq %r8 /* | %r8 | 0x20 */
pushq %rcx /* | %rcx | 0x18 */
pushq %rdx /* | %rdx | 0x10 */
pushq %rsi /* | %rsi | 0x8 alist */
pushq %rdi /* | %rdi | 0x0 format */
movq %rsp, %rbx /* %rbx = current %rsp */
leaq panic_quiesce(%rip), %rdi /* %rdi = &panic_quiesce */
call dtrace_panic_trigger /* %eax = dtrace_panic_trigger() */
jmp vpanic_common
END(dtrace_vpanic)
/*
int
panic_trigger(int *tp)
*/
ENTRY(panic_trigger)
xorl %eax, %eax
movl $0xdefacedd, %edx
lock
xchgl %edx, (%rdi)
cmpl $0, %edx
je 0f
movl $0, %eax
ret
0: movl $1, %eax
ret
END(panic_trigger)
/*
int
dtrace_panic_trigger(int *tp)
*/
ENTRY(dtrace_panic_trigger)
xorl %eax, %eax
movl $0xdefacedd, %edx
lock
xchgl %edx, (%rdi)
cmpl $0, %edx
je 0f
movl $0, %eax
ret
0: movl $1, %eax
ret
END(dtrace_panic_trigger)