freebsd-dev/sys/dev/liquidio/base/cn23xx_pf_regs.h
Sean Bruno f173c2b77e The diff is the initial submission of Cavium Liquidio 2350/2360 10/25G
Intelligent NIC driver.

The submission conconsists of firmware binary file and driver sources.

Submitted by:	pkanneganti@cavium.com (Prasad V Kanneganti)
Relnotes:	Yes
Sponsored by:	Cavium Networks
Differential Revision:	https://reviews.freebsd.org/D11927
2017-09-12 23:36:58 +00:00

412 lines
14 KiB
C

/*
* BSD LICENSE
*
* Copyright(c) 2017 Cavium, Inc.. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Cavium, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*$FreeBSD$*/
/* \file cn23xx_pf_regs.h
* \brief Host Driver: Register Address and Register Mask values for
* CN23XX devices.
*/
#ifndef __CN23XX_PF_REGS_H__
#define __CN23XX_PF_REGS_H__
#define LIO_CN23XX_CFG_PCIE_DEVCTL 0x78
#define LIO_CN23XX_CFG_PCIE_UNCORRECT_ERR_MASK 0x108
#define LIO_CN23XX_CFG_PCIE_CORRECT_ERR_STATUS 0x110
#define LIO_CN23XX_CFG_PCIE_DEVCTL_MASK 0x00040000
#define LIO_CN23XX_PCIE_SRIOV_FDL 0x188
#define LIO_CN23XX_PCIE_SRIOV_FDL_BIT_POS 0x10
#define LIO_CN23XX_PCIE_SRIOV_FDL_MASK 0xFF
/* ############## BAR0 Registers ################ */
#define LIO_CN23XX_SLI_CTL_PORT_START 0x286E0
#define LIO_CN23XX_PORT_OFFSET 0x10
#define LIO_CN23XX_SLI_CTL_PORT(p) \
(LIO_CN23XX_SLI_CTL_PORT_START + \
((p) * LIO_CN23XX_PORT_OFFSET))
/* 2 scatch registers (64-bit) */
#define LIO_CN23XX_SLI_WINDOW_CTL 0x282E0
#define LIO_CN23XX_SLI_SCRATCH1 0x283C0
#define LIO_CN23XX_SLI_SCRATCH2 0x283D0
#define LIO_CN23XX_SLI_WINDOW_CTL_DEFAULT 0x200000ULL
/* 1 registers (64-bit) - SLI_CTL_STATUS */
#define LIO_CN23XX_SLI_CTL_STATUS 0x28570
/*
* SLI Packet Input Jabber Register (64 bit register)
* <31:0> for Byte count for limiting sizes of packet sizes
* that are allowed for sli packet inbound packets.
* the default value is 0xFA00(=64000).
*/
#define LIO_CN23XX_SLI_PKT_IN_JABBER 0x29170
#define LIO_CN23XX_SLI_WIN_WR_ADDR_LO 0x20000
#define LIO_CN23XX_SLI_WIN_WR_ADDR64 LIO_CN23XX_SLI_WIN_WR_ADDR_LO
#define LIO_CN23XX_SLI_WIN_RD_ADDR_LO 0x20010
#define LIO_CN23XX_SLI_WIN_RD_ADDR_HI 0x20014
#define LIO_CN23XX_SLI_WIN_RD_ADDR64 LIO_CN23XX_SLI_WIN_RD_ADDR_LO
#define LIO_CN23XX_SLI_WIN_WR_DATA_LO 0x20020
#define LIO_CN23XX_SLI_WIN_WR_DATA_HI 0x20024
#define LIO_CN23XX_SLI_WIN_WR_DATA64 LIO_CN23XX_SLI_WIN_WR_DATA_LO
#define LIO_CN23XX_SLI_WIN_RD_DATA_LO 0x20040
#define LIO_CN23XX_SLI_WIN_RD_DATA_HI 0x20044
#define LIO_CN23XX_SLI_WIN_RD_DATA64 LIO_CN23XX_SLI_WIN_RD_DATA_LO
#define LIO_CN23XX_SLI_WIN_WR_MASK_REG 0x20030
#define LIO_CN23XX_SLI_MAC_CREDIT_CNT 0x23D70
/*
* 4 registers (64-bit) for mapping IOQs to MACs(PEMs)-
* SLI_PKT_MAC(0..3)_PF(0..1)_RINFO
*/
#define LIO_CN23XX_SLI_PKT_MAC_RINFO_START64 0x29030
/*1 register (64-bit) to determine whether IOQs are in reset. */
#define LIO_CN23XX_SLI_PKT_IOQ_RING_RST 0x291E0
/* Each Input Queue register is at a 16-byte Offset in BAR0 */
#define LIO_CN23XX_IQ_OFFSET 0x20000
#define LIO_CN23XX_MAC_RINFO_OFFSET 0x20
#define LIO_CN23XX_PF_RINFO_OFFSET 0x10
#define LIO_CN23XX_SLI_PKT_MAC_RINFO64(mac, pf) \
(LIO_CN23XX_SLI_PKT_MAC_RINFO_START64 + \
((mac) * LIO_CN23XX_MAC_RINFO_OFFSET) + \
((pf) * LIO_CN23XX_PF_RINFO_OFFSET))
/* mask for total rings, setting TRS to base */
#define LIO_CN23XX_PKT_MAC_CTL_RINFO_TRS BIT_ULL(16)
/* Starting bit of the TRS field in LIO_CN23XX_SLI_PKT_MAC_RINFO64 register */
#define LIO_CN23XX_PKT_MAC_CTL_RINFO_TRS_BIT_POS 16
/*###################### REQUEST QUEUE #########################*/
/* 64 registers for Input Queue Instr Count - SLI_PKT_IN_DONE0_CNTS */
#define LIO_CN23XX_SLI_PKT_IN_DONE_CNTS_START64 0x10040
/* 64 registers for Input Queues Start Addr - SLI_PKT0_INSTR_BADDR */
#define LIO_CN23XX_SLI_PKT_INSTR_BADDR_START64 0x10010
/* 64 registers for Input Doorbell - SLI_PKT0_INSTR_BAOFF_DBELL */
#define LIO_CN23XX_SLI_PKT_INSTR_BADDR_DBELL_START 0x10020
/* 64 registers for Input Queue size - SLI_PKT0_INSTR_FIFO_RSIZE */
#define LIO_CN23XX_SLI_PKT_INSTR_FIFO_RSIZE_START 0x10030
/*
* 64 registers (64-bit) - ES, RO, NS, Arbitration for Input Queue Data &
* gather list fetches. SLI_PKT(0..63)_INPUT_CONTROL.
*/
#define LIO_CN23XX_SLI_PKT_INPUT_CONTROL_START64 0x10000
/*------- Request Queue Macros ---------*/
#define LIO_CN23XX_SLI_IQ_PKT_CONTROL64(iq) \
(LIO_CN23XX_SLI_PKT_INPUT_CONTROL_START64 + \
((iq) * LIO_CN23XX_IQ_OFFSET))
#define LIO_CN23XX_SLI_IQ_BASE_ADDR64(iq) \
(LIO_CN23XX_SLI_PKT_INSTR_BADDR_START64 + \
((iq) * LIO_CN23XX_IQ_OFFSET))
#define LIO_CN23XX_SLI_IQ_SIZE(iq) \
(LIO_CN23XX_SLI_PKT_INSTR_FIFO_RSIZE_START + \
((iq) * LIO_CN23XX_IQ_OFFSET))
#define LIO_CN23XX_SLI_IQ_DOORBELL(iq) \
(LIO_CN23XX_SLI_PKT_INSTR_BADDR_DBELL_START + \
((iq) * LIO_CN23XX_IQ_OFFSET))
#define LIO_CN23XX_SLI_IQ_INSTR_COUNT64(iq) \
(LIO_CN23XX_SLI_PKT_IN_DONE_CNTS_START64 + \
((iq) * LIO_CN23XX_IQ_OFFSET))
/*------------------ Masks ----------------*/
#define LIO_CN23XX_PKT_INPUT_CTL_VF_NUM BIT_ULL(32)
#define LIO_CN23XX_PKT_INPUT_CTL_MAC_NUM BIT(29)
/*
* Number of instructions to be read in one MAC read request.
* setting to Max value(4)
*/
#define LIO_CN23XX_PKT_INPUT_CTL_RDSIZE (3 << 25)
#define LIO_CN23XX_PKT_INPUT_CTL_IS_64B BIT(24)
#define LIO_CN23XX_PKT_INPUT_CTL_RST BIT(23)
#define LIO_CN23XX_PKT_INPUT_CTL_QUIET BIT(28)
#define LIO_CN23XX_PKT_INPUT_CTL_RING_ENB BIT(22)
#define LIO_CN23XX_PKT_INPUT_CTL_DATA_ES_64B_SWAP BIT(6)
#define LIO_CN23XX_PKT_INPUT_CTL_USE_CSR BIT(4)
#define LIO_CN23XX_PKT_INPUT_CTL_GATHER_ES_64B_SWAP (2)
#define LIO_CN23XX_PKT_INPUT_CTL_PF_NUM_POS (45)
/* These bits[43:32] select the function number within the PF */
#define LIO_CN23XX_PKT_INPUT_CTL_MAC_NUM_POS (29)
#define LIO_CN23XX_PKT_IN_DONE_WMARK_MASK (0xFFFFULL)
#define LIO_CN23XX_PKT_IN_DONE_WMARK_BIT_POS (32)
#define LIO_CN23XX_PKT_IN_DONE_CNT_MASK 0x00000000FFFFFFFFULL
#if BYTE_ORDER == LITTLE_ENDIAN
#define LIO_CN23XX_PKT_INPUT_CTL_MASK \
(LIO_CN23XX_PKT_INPUT_CTL_RDSIZE | \
LIO_CN23XX_PKT_INPUT_CTL_DATA_ES_64B_SWAP | \
LIO_CN23XX_PKT_INPUT_CTL_USE_CSR)
#else /* BYTE_ORDER != LITTLE_ENDIAN */
#define LIO_CN23XX_PKT_INPUT_CTL_MASK \
(LIO_CN23XX_PKT_INPUT_CTL_RDSIZE | \
LIO_CN23XX_PKT_INPUT_CTL_DATA_ES_64B_SWAP | \
LIO_CN23XX_PKT_INPUT_CTL_USE_CSR | \
LIO_CN23XX_PKT_INPUT_CTL_GATHER_ES_64B_SWAP)
#endif /* BYTE_ORDER == LITTLE_ENDIAN */
/*############################ OUTPUT QUEUE #########################*/
/* 64 registers for Output queue control - SLI_PKT(0..63)_OUTPUT_CONTROL */
#define LIO_CN23XX_SLI_PKT_OUTPUT_CONTROL_START 0x10050
/* 64 registers for Output queue buffer and info size - SLI_PKT0_OUT_SIZE */
#define LIO_CN23XX_SLI_PKT_OUT_SIZE 0x10060
/* 64 registers for Output Queue Start Addr - SLI_PKT0_SLIST_BADDR */
#define LIO_CN23XX_SLI_SLIST_BADDR_START64 0x10070
/* 64 registers for Output Queue Packet Credits - SLI_PKT0_SLIST_BAOFF_DBELL */
#define LIO_CN23XX_SLI_PKT_SLIST_BAOFF_DBELL_START 0x10080
/* 64 registers for Output Queue size - SLI_PKT0_SLIST_FIFO_RSIZE */
#define LIO_CN23XX_SLI_PKT_SLIST_FIFO_RSIZE_START 0x10090
/* 64 registers for Output Queue Packet Count - SLI_PKT0_CNTS */
#define LIO_CN23XX_SLI_PKT_CNTS_START 0x100B0
/* 64 registers for Output Queue INT Levels - SLI_PKT0_INT_LEVELS */
#define LIO_CN23XX_SLI_PKT_INT_LEVELS_START64 0x100A0
/* Each Output Queue register is at a 16-byte Offset in BAR0 */
#define LIO_CN23XX_OQ_OFFSET 0x20000
/* 1 (64-bit register) for Output Queue backpressure across all rings. */
#define LIO_CN23XX_SLI_OQ_WMARK 0x29180
/* Global pkt control register */
#define LIO_CN23XX_SLI_GBL_CONTROL 0x29210
/* Backpressure enable register for PF0 */
#define LIO_CN23XX_SLI_OUT_BP_EN_W1S 0x29260
/* Backpressure enable register for PF1 */
#define LIO_CN23XX_SLI_OUT_BP_EN2_W1S 0x29270
/*------- Output Queue Macros ---------*/
#define LIO_CN23XX_SLI_OQ_PKT_CONTROL(oq) \
(LIO_CN23XX_SLI_PKT_OUTPUT_CONTROL_START + \
((oq) * LIO_CN23XX_OQ_OFFSET))
#define LIO_CN23XX_SLI_OQ_BASE_ADDR64(oq) \
(LIO_CN23XX_SLI_SLIST_BADDR_START64 + \
((oq) * LIO_CN23XX_OQ_OFFSET))
#define LIO_CN23XX_SLI_OQ_SIZE(oq) \
(LIO_CN23XX_SLI_PKT_SLIST_FIFO_RSIZE_START + \
((oq) * LIO_CN23XX_OQ_OFFSET))
#define LIO_CN23XX_SLI_OQ_BUFF_INFO_SIZE(oq) \
(LIO_CN23XX_SLI_PKT_OUT_SIZE + \
((oq) * LIO_CN23XX_OQ_OFFSET))
#define LIO_CN23XX_SLI_OQ_PKTS_SENT(oq) \
(LIO_CN23XX_SLI_PKT_CNTS_START + \
((oq) * LIO_CN23XX_OQ_OFFSET))
#define LIO_CN23XX_SLI_OQ_PKTS_CREDIT(oq) \
(LIO_CN23XX_SLI_PKT_SLIST_BAOFF_DBELL_START + \
((oq) * LIO_CN23XX_OQ_OFFSET))
#define LIO_CN23XX_SLI_OQ_PKT_INT_LEVELS(oq) \
(LIO_CN23XX_SLI_PKT_INT_LEVELS_START64 + \
((oq) * LIO_CN23XX_OQ_OFFSET))
/*------------------ Masks ----------------*/
#define LIO_CN23XX_PKT_OUTPUT_CTL_TENB BIT(13)
#define LIO_CN23XX_PKT_OUTPUT_CTL_CENB BIT(12)
#define LIO_CN23XX_PKT_OUTPUT_CTL_IPTR BIT(11)
#define LIO_CN23XX_PKT_OUTPUT_CTL_ES BIT(9)
#define LIO_CN23XX_PKT_OUTPUT_CTL_NSR BIT(8)
#define LIO_CN23XX_PKT_OUTPUT_CTL_ROR BIT(7)
#define LIO_CN23XX_PKT_OUTPUT_CTL_DPTR BIT(6)
#define LIO_CN23XX_PKT_OUTPUT_CTL_BMODE BIT(5)
#define LIO_CN23XX_PKT_OUTPUT_CTL_ES_P BIT(3)
#define LIO_CN23XX_PKT_OUTPUT_CTL_NSR_P BIT(2)
#define LIO_CN23XX_PKT_OUTPUT_CTL_ROR_P BIT(1)
#define LIO_CN23XX_PKT_OUTPUT_CTL_RING_ENB BIT(0)
/*######################## MSIX TABLE #########################*/
#define LIO_CN23XX_MSIX_TABLE_ADDR_START 0x0
#define CN23XX_MSIX_TABLE_DATA_START 0x8
#define CN23XX_MSIX_TABLE_SIZE 0x10
#define CN23XX_MSIX_TABLE_ADDR(idx) \
(LIO_CN23XX_MSIX_TABLE_ADDR_START + \
((idx) * LIO_CN23XX_MSIX_TABLE_SIZE))
#define CN23XX_MSIX_TABLE_DATA(idx) \
(LIO_CN23XX_MSIX_TABLE_DATA_START + \
((idx) * LIO_CN23XX_MSIX_TABLE_SIZE))
/*######################## INTERRUPTS #########################*/
#define LIO_CN23XX_MAC_INT_OFFSET 0x20
#define LIO_CN23XX_PF_INT_OFFSET 0x10
/* 1 register (64-bit) for Interrupt Summary */
#define LIO_CN23XX_SLI_INT_SUM64 0x27000
/* 4 registers (64-bit) for Interrupt Enable for each Port */
#define LIO_CN23XX_SLI_INT_ENB64 0x27080
#define LIO_CN23XX_SLI_MAC_PF_INT_SUM64(mac, pf) \
(LIO_CN23XX_SLI_INT_SUM64 + \
((mac) * LIO_CN23XX_MAC_INT_OFFSET) + \
((pf) * LIO_CN23XX_PF_INT_OFFSET))
#define LIO_CN23XX_SLI_MAC_PF_INT_ENB64(mac, pf) \
(LIO_CN23XX_SLI_INT_ENB64 + \
((mac) * LIO_CN23XX_MAC_INT_OFFSET) + \
((pf) * LIO_CN23XX_PF_INT_OFFSET))
/* 1 register (64-bit) to indicate which Output Queue reached pkt threshold */
#define LIO_CN23XX_SLI_PKT_CNT_INT 0x29130
/* 1 register (64-bit) to indicate which Output Queue reached time threshold */
#define LIO_CN23XX_SLI_PKT_TIME_INT 0x29140
/*------------------ Interrupt Masks ----------------*/
#define LIO_CN23XX_INTR_PO_INT BIT_ULL(63)
#define LIO_CN23XX_INTR_PI_INT BIT_ULL(62)
#define LIO_CN23XX_INTR_RESEND BIT_ULL(60)
#define LIO_CN23XX_INTR_CINT_ENB BIT_ULL(48)
#define LIO_CN23XX_INTR_MIO_INT BIT(1)
#define LIO_CN23XX_INTR_PKT_TIME BIT(5)
#define LIO_CN23XX_INTR_M0UPB0_ERR BIT(8)
#define LIO_CN23XX_INTR_M0UPWI_ERR BIT(9)
#define LIO_CN23XX_INTR_M0UNB0_ERR BIT(10)
#define LIO_CN23XX_INTR_M0UNWI_ERR BIT(11)
#define LIO_CN23XX_INTR_DMA0_FORCE BIT_ULL(32)
#define LIO_CN23XX_INTR_DMA1_FORCE BIT_ULL(33)
#define LIO_CN23XX_INTR_DMA0_TIME BIT_ULL(36)
#define LIO_CN23XX_INTR_DMA1_TIME BIT_ULL(37)
#define LIO_CN23XX_INTR_DMAPF_ERR BIT_ULL(59)
#define LIO_CN23XX_INTR_PKTPF_ERR BIT_ULL(61)
#define LIO_CN23XX_INTR_PPPF_ERR BIT_ULL(63)
#define LIO_CN23XX_INTR_DMA0_DATA (LIO_CN23XX_INTR_DMA0_TIME)
#define LIO_CN23XX_INTR_DMA1_DATA (LIO_CN23XX_INTR_DMA1_TIME)
#define LIO_CN23XX_INTR_DMA_DATA \
(LIO_CN23XX_INTR_DMA0_DATA | LIO_CN23XX_INTR_DMA1_DATA)
/* By fault only TIME based */
#define LIO_CN23XX_INTR_PKT_DATA (LIO_CN23XX_INTR_PKT_TIME)
/* Sum of interrupts for error events */
#define LIO_CN23XX_INTR_ERR \
(LIO_CN23XX_INTR_M0UPB0_ERR | \
LIO_CN23XX_INTR_M0UPWI_ERR | \
LIO_CN23XX_INTR_M0UNB0_ERR | \
LIO_CN23XX_INTR_M0UNWI_ERR | \
LIO_CN23XX_INTR_DMAPF_ERR | \
LIO_CN23XX_INTR_PKTPF_ERR | \
LIO_CN23XX_INTR_PPPF_ERR)
/* Programmed Mask for Interrupt Sum */
#define LIO_CN23XX_INTR_MASK \
(LIO_CN23XX_INTR_DMA_DATA | \
LIO_CN23XX_INTR_DMA0_FORCE | \
LIO_CN23XX_INTR_DMA1_FORCE | \
LIO_CN23XX_INTR_MIO_INT | \
LIO_CN23XX_INTR_ERR)
/* 4 Registers (64 - bit) */
#define LIO_CN23XX_SLI_S2M_PORT_CTL_START 0x23D80
#define LIO_CN23XX_SLI_S2M_PORTX_CTL(port) \
(LIO_CN23XX_SLI_S2M_PORT_CTL_START + \
((port) * 0x10))
#define LIO_CN23XX_SLI_MAC_NUMBER 0x20050
/*
* PEM(0..3)_BAR1_INDEX(0..15)address is defined as
* addr = (0x00011800C0000100 |port <<24 |idx <<3 )
* Here, port is PEM(0..3) & idx is INDEX(0..15)
*/
#define LIO_CN23XX_PEM_BAR1_INDEX_START 0x00011800C0000100ULL
#define LIO_CN23XX_PEM_OFFSET 24
#define LIO_CN23XX_BAR1_INDEX_OFFSET 3
#define LIO_CN23XX_PEM_BAR1_INDEX_REG(port, idx) \
(LIO_CN23XX_PEM_BAR1_INDEX_START + \
((port) << LIO_CN23XX_PEM_OFFSET) + \
((idx) << LIO_CN23XX_BAR1_INDEX_OFFSET))
/*############################ DPI #########################*/
/* 4 Registers (64-bit) */
#define LIO_CN23XX_DPI_SLI_PRT_CFG_START 0x0001df0000000900ULL
#define LIO_CN23XX_DPI_SLI_PRTX_CFG(port) \
((IO_CN23XX_DPI_SLI_PRT_CFG_START + \
((port) * 0x8))
/*############################ RST #########################*/
#define LIO_CN23XX_RST_BOOT 0x0001180006001600ULL
#define LIO_CN23XX_RST_SOFT_RST 0x0001180006001680ULL
#define LIO_CN23XX_LMC0_RESET_CTL 0x0001180088000180ULL
#define LIO_CN23XX_LMC0_RESET_CTL_DDR3RST_MASK 0x0000000000000001ULL
#endif /* __CN23XX_PF_REGS_H__ */