freebsd-dev/sys/mips/conf/TL-WR1043NDv2
2016-08-28 04:08:26 +00:00

54 lines
1.2 KiB
Plaintext

#
# TP-Link TL-WR1043nd v2 - based on the AP135 reference design.
#
# This contains a QCA9558 MIPS74k SoC with on-board 3x3 2GHz wifi,
# 64MiB RAM and an AR8327 5-port gigabit ethernet switch.
#
# $FreeBSD$
#
#NO_UNIVERSE
# Include the default QCA955x parameters
include "std.QCA955X"
ident TL-WR1043NDv2
# Override hints with board values
hints "TL-WR1043NDv2.hints"
options AR71XX_REALMEM=(64*1024*1024)
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch
# read MSDOS formatted disks - USB
options MSDOSFS
# Enable the uboot environment stuff rather then the
# redboot stuff.
options AR71XX_ENV_UBOOT
# uzip - to boot natively from flash
device geom_uzip
options GEOM_UZIP
# Used for the static uboot partition map
device geom_map
# yes, this board has a PCI connected atheros device
#device ath_pci
#options AR71XX_ATH_EEPROM
#device firmware # Used by the above
#options ATH_EEPROM_FIRMWARE
# Boot off of the rootfs, as defined in the geom_map setup.
options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
# Default to accept
options IPFIREWALL_DEFAULT_TO_ACCEPT