freebsd-dev/sys/powerpc/powermac/ata_macio.c
2002-09-19 04:52:07 +00:00

242 lines
6.6 KiB
C

/*
* Copyright 2002 by Peter Grehan. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Mac-io ATA controller
*/
#include "opt_ata.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/disk.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/bio.h>
#include <sys/malloc.h>
#include <sys/devicestat.h>
#include <sys/sysctl.h>
#include <machine/stdarg.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <dev/ata/ata-all.h>
#include <dev/ofw/openfirm.h>
#include <powerpc/powermac/maciovar.h>
/*
* Define the macio ata bus attachment. This creates a pseudo-bus that
* the ATA device can be attached to
*/
static int ata_macio_attach(device_t dev);
static int ata_macio_probe(device_t dev);
static int ata_macio_print_child(device_t dev, device_t child);
struct resource *ata_macio_alloc_resource(device_t, device_t, int, int *,
u_long, u_long, u_long, u_int);
static int ata_macio_release_resource(device_t, device_t, int, int,
struct resource *);
static device_method_t ata_macio_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ata_macio_probe),
DEVMETHOD(device_attach, ata_macio_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus methods */
DEVMETHOD(bus_print_child, ata_macio_print_child),
DEVMETHOD(bus_alloc_resource, ata_macio_alloc_resource),
DEVMETHOD(bus_release_resource, ata_macio_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
{ 0, 0 }
};
static driver_t ata_macio_driver = {
"atamacio",
ata_macio_methods,
0,
};
static devclass_t ata_macio_devclass;
DRIVER_MODULE(atamacio, macio, ata_macio_driver, ata_macio_devclass, 0, 0);
static int
ata_macio_probe(device_t dev)
{
char *type = macio_get_devtype(dev);
if (strcmp(type, "ata") != 0)
return (ENXIO);
/* Print keylargo/pangea ??? */
device_set_desc(dev, "Mac-IO ATA Controller");
return (0);
}
static int
ata_macio_attach(device_t dev)
{
/*
* Add a single child per controller. Should be able
* to add two
*/
device_add_child(dev, "ata",
devclass_find_free_unit(ata_devclass, 0));
return (bus_generic_attach(dev));
}
static int
ata_macio_print_child(device_t dev, device_t child)
{
int retval = 0;
retval += bus_print_child_header(dev, child);
retval += bus_print_child_footer(dev, child);
return (retval);
}
/* offset to control registers from base */
#define ATA_MACIO_ALTOFFSET 0x160
struct resource *
ata_macio_alloc_resource(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct resource *res = NULL;
int myrid;
u_int *ofw_regs;
ofw_regs = macio_get_regs(dev);
/*
* The offset for the register bank is in the first ofw register,
* with the base address coming from the parent macio bus (but
* accessible via the ata-macio child)
*/
if (type == SYS_RES_IOPORT) {
switch (*rid) {
case ATA_IOADDR_RID:
myrid = 0;
start = ofw_regs[0];
end = start + (ATA_IOSIZE << 4) - 1;
count = ATA_IOSIZE << 4;
res = BUS_ALLOC_RESOURCE(device_get_parent(dev), child,
SYS_RES_IOPORT, &myrid,
start, end, count,
PPC_BUS_SPARSE4 | flags);
break;
case ATA_ALTADDR_RID:
myrid = 0;
start = ofw_regs[0] + ATA_MACIO_ALTOFFSET;
end = start + (ATA_ALTIOSIZE << 4) - 1;
count = ATA_ALTIOSIZE << 4;
res = BUS_ALLOC_RESOURCE(device_get_parent(dev), child,
SYS_RES_IOPORT, &myrid,
start, end, count,
PPC_BUS_SPARSE4 | flags);
break;
case ATA_BMADDR_RID:
/* looks difficult to support DBDMA in FreeBSD... */
break;
}
return (res);
} else if (type == SYS_RES_IRQ && *rid == ATA_IRQ_RID) {
/*
* Pass this on to the parent, using the IRQ from the
* ATA pseudo-bus resource
*/
res = bus_generic_rl_alloc_resource(device_get_parent(dev),
dev, SYS_RES_IRQ, 0, 0, ~0, 1, flags);
return (res);
} else {
return (NULL);
}
}
static int
ata_macio_release_resource(device_t dev, device_t child, int type, int rid,
struct resource *r)
{
printf("macio: release resource\n");
return (0);
}
/*
* Define the actual ATA device. This is a sub-bus to the ata-macio layer
* to allow the higher layer bus to massage the resource allocation.
*/
static int ata_macio_sub_probe(device_t dev);
static device_method_t ata_macio_sub_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ata_macio_sub_probe),
DEVMETHOD(device_attach, ata_attach),
DEVMETHOD(device_detach, ata_detach),
DEVMETHOD(device_resume, ata_resume),
{ 0, 0 }
};
static driver_t ata_macio_sub_driver = {
"ata",
ata_macio_sub_methods,
sizeof(struct ata_channel),
};
DRIVER_MODULE(ata, atamacio, ata_macio_sub_driver, ata_devclass, 0, 0);
static int
ata_macio_sub_probe(device_t dev)
{
struct ata_channel *ch = device_get_softc(dev);
ch->unit = 0;
ch->flags = ATA_USE_16BIT;
return ata_probe(dev);
}