107 lines
3.7 KiB
Plaintext
107 lines
3.7 KiB
Plaintext
1998.07.22, Warsaw, Poland
|
|
|
|
PicoBSD @VER@ (DIALUP flavor)
|
|
---------------------------
|
|
|
|
|
|
What is PicoBSD?
|
|
----------------
|
|
|
|
It's a one floppy version of FreeBSD (please see http://www.freebsd.org),
|
|
configured mainly for dialup access. It can be used as a means to read your
|
|
mail remotely, or to log in somewhere and do the work there.
|
|
|
|
What are minimal requirements?
|
|
------------------------------
|
|
|
|
* 386SX CPU or better (this release contains also FPU emulator)
|
|
* 8MB RAM - the more the better.
|
|
* Modem sitting on COM1-COM4 (default is to use COM2), if you want to have
|
|
a PPP connection.
|
|
* Network card: compatible with NE2000, or PCI cards with DEC chipsets
|
|
or 3C509 series (ed, ep and de drivers). There is also driver for Intel
|
|
EtherExpress PCI card (fxp), and Lance/PCnet (lnc).
|
|
|
|
How to make a dialup connection?
|
|
--------------------------------
|
|
|
|
I recommend running /stand/dialup script, which will additionally configure
|
|
the PPP to allow you to automatically connect to your provider, and
|
|
will make the ppp to run in background. However, if you like to do it
|
|
yourself, or the script doesn't work properly in your case (let me know
|
|
this!), here are the steps you should take:
|
|
|
|
1. Go to /etc/ppp directory and edit file ppp.conf (using ee editor). You
|
|
should check at least the port number of your modem (it's configured
|
|
on cuaa1==COM2 by default).
|
|
2. After you're happy with it, start 'ppp' program. Enter the terminal
|
|
mode ('term') - you are now directly connected to your modem, so you
|
|
can normally dial the number using AT commands (e.g. atdt555666777),
|
|
and log in to communictaion server. You should see something like
|
|
this:
|
|
|
|
(comm server prompt) login: abial
|
|
(comm server prompt) Password: ********
|
|
|
|
Then either the comm server automatically switches to PPP, or you
|
|
should issue a command to tell it to do so (e.g. 'go ppp', 'PPP' or
|
|
other). When PPP is started, you should see something like:
|
|
|
|
ppp on pico> Packet mode
|
|
PPP on pico>
|
|
|
|
Notice the uppercase PPP - it means that the protocol is up, and now
|
|
you're connected. Congratulations. :-)
|
|
3. Your console is blocked now, but you can use other virtual consoles
|
|
available under Alt-Fn.
|
|
|
|
How to configure my Ethernet card?
|
|
----------------------------------
|
|
|
|
Hopefully your ethernet card is supported by PicoBSD kernel, and in case of
|
|
ISA cards you have already set up correctly its parameters in UserConfig
|
|
editor. You can check if PicoBSD found your card by looking into startup
|
|
messages ('dmesg | more').
|
|
|
|
The easiest way to do it is to edit /etc/rc.conf file ('ee /etc/rc.conf').
|
|
Find the line which says 'network_interfaces' and add the name of your
|
|
card to the list. Then add yet another line 'ifconfig_<if_name>' which
|
|
actually sets up your IP address and netmask. E.g:
|
|
|
|
network_interfaces="lo0 ed0"
|
|
ifconfig_lo0="inet 127.0.0.1"
|
|
ifconfig_ed0="inet 192.168.0.1 netmask 255.255.255.0"
|
|
|
|
Then you have to set up your default gateway, which is usually the router
|
|
nearest to you (on the same LAN). E.g:
|
|
|
|
defaultrouter="192.168.0.100"
|
|
|
|
Then you save this information on the floppy with 'update' command, and
|
|
reboot.
|
|
|
|
Of course, you can also issue the proper commands by hand:
|
|
|
|
ifconfig ed0 inet 192.168.0.1 netmask 255.255.255.0
|
|
route add default 192.168.0.100
|
|
|
|
Once you do this, you should be able to 'ping' some remote IP address.
|
|
|
|
Where to get additional info?
|
|
-----------------------------
|
|
|
|
There is official page of this project at:
|
|
|
|
http://www.freebsd.org/~picobsd/
|
|
|
|
You can find some informations there - not too much yet, to be sure... ;-)
|
|
I'll put there also new versions of PicoBSD and bugfixes.
|
|
|
|
I'll be glad hearing from you about your experiences with PicoBSD. Thanks.
|
|
|
|
Have fun!
|
|
|
|
Andrzej Bialecki <abial@freebsd.org>
|
|
|
|
$Id: README.en,v 1.3 1998/10/15 21:40:00 abial Exp $
|