d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1267802438
freebsd-dev/sys/dev/esp/esp_sbus.c
Marius Strobl 85de9f54f8 o Move the MODULE_DEPEND() for cam(4) from the esp_sbus.c front-end to 
the ncr53c9x.c core where it actually belongs so future front-ends
  don't need to add it.
o Use the correct OFW property when looking for the initiator ID of the
  SBus device.
o Don't specify an alignment when creating the parent DMA tag for
  SUNW,fas; their DMA engine doesn't require an alignment constraint
  and it's no inherited by the child DMA tags anyway (which probably
  is a bug though).
o Drop the superfluous sc_maxsync and use sc_minsync instead. The
  former apparently was added due to a confusion with the maximum
  frequency used in cam(4), which basically corresponds to the
  inverse of minimum sync period.
o Merge ncr53c9x.c from NetBSD:
  1.116: NCRDMA_SETUP() should be called before NCR_SET_COUNT() and
         NCRCMD_DMA command in ncr53c9x_select().
  1.125: free allocated resources on detach.
o Static'ize ncr53c9x_action(), ncr53c9x_init() and ncr53c9x_reset()
  as these are not required outside of ncr53c9x.c.
o In ncr53c9x_attach() don't leak the device mutex in case attaching
  fails.
o Register an asynchronous notification handler so in case cam(4)
  reports a lost device we can cancel outstanding commands and
  restore the default parameters for the target in question.
o For FAS366 correctly support 16-bit target IDs and let it know
  that we use 32-bit transfers.
o Overhaul the negotiation of transfer settings. This includes
  distinguishing between current and goal transfer settings of the
  target so we can renegotiate their goal settings when necessary
  and correcting the order in which tagged, wide and synchronous
  transfers are negotiated.
o If we are requesting sense, force a renegotiation if we are
  currently using anything different from asynchronous at 8 bit
  as the target might have lost our transfer negotiations.
o In case of an XPT_RESET_BUS just directly call ncr53c9x_init()
  instead of issuing a NCRCMD_RSTSCSI, which in turn will issue an
  interrupt that is treated as an unexpected SCSI bus reset by
  ncr53c9x_intr() and thus calls ncr53c9x_init(). Remove the now
  no longer used ncr53c9x_scsi_reset().
o Correct an off-by-one error when setting cpi->max_lun.
o In replace printf(9) with device_printf(9) calls where appropriate
  and in ncr53c9x_action() remove some unnecessarily verbose messages.
o In ncr53c9x_sched() use TAILQ_FOREACH() instead of reimplementing
  it and consolidate two tagging-related target info checks into one.
o In ncr53c9x_done() set the CAM status to CAM_SCSI_STATUS_ERROR when
  appropriate, respect CAM_DIS_AUTOSENSE and teach it to return SCSI
  status information.
o In ncr53c9x_dequeue() ensure the tags are cleared.
o Use ulmin() instead of min() where appropriate.
o In ncr53c9x_msgout() consistently use the reset label.
o When we're interrupted during a data phase and the DMA engine is
  still active, don't panic but reset the core and the DMA engine as
  this should be sufficient. Also, the typical problem for triggering
  this was the lack of renegotiation when requesting sense.
o Correctly handle DEVICE RESETs.
o Adapt the locking of esp(4) to MPSAFE cam(4). This includes moving
  the calls of lsi64854_attach() to the bus front-ends so it can pass
  the esp(4) mutex to bus_dma_tag_create(9).
o Change the LSI64854 driver to not create a DMA tag and map for the
  Ethernet channel as le(4) will handle these on its own as well as
  sync and unload the DMA maps for the SCSI and parallel port channel
  after a DMA transfer.
o Cam(4)'ify some NetBSD-centric comments.
o Use bus_{read,write}_*(9) instead of bus_space_{read,write}_*(9)
  and take advantage of rman_get_rid(9) in order to save some softc
  members.

Reviewed by:	scottl
MFC after:	1 month
2008-09-08 20:20:44 +00:00

853 lines
22 KiB
C
Raw Blame History

/*-
* Copyright (c) 2004 Scott Long
* Copyright (c) 2005 Marius Strobl <marius@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/* $NetBSD: esp_sbus.c,v 1.31 2005/02/27 00:27:48 perry Exp $ */
/*-
* Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum; Jason R. Thorpe of the Numerical Aerospace
* Simulation Facility, NASA Ames Research Center; Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <sparc64/sbus/lsi64854reg.h>
#include <sparc64/sbus/lsi64854var.h>
#include <sparc64/sbus/sbusvar.h>
#include <dev/esp/ncr53c9xreg.h>
#include <dev/esp/ncr53c9xvar.h>
/* #define ESP_SBUS_DEBUG */
struct esp_softc {
struct ncr53c9x_softc sc_ncr53c9x; /* glue to MI code */
struct device *sc_dev;
struct resource *sc_res;
struct resource *sc_irqres;
void *sc_irq;
struct lsi64854_softc *sc_dma; /* pointer to my DMA */
};
static devclass_t esp_devclass;
static int esp_probe(device_t);
static int esp_dma_attach(device_t);
static int esp_dma_detach(device_t);
static int esp_sbus_attach(device_t);
static int esp_sbus_detach(device_t);
static int esp_suspend(device_t);
static int esp_resume(device_t);
static device_method_t esp_dma_methods[] = {
DEVMETHOD(device_probe, esp_probe),
DEVMETHOD(device_attach, esp_dma_attach),
DEVMETHOD(device_detach, esp_dma_detach),
DEVMETHOD(device_suspend, esp_suspend),
DEVMETHOD(device_resume, esp_resume),
{0, 0}
};
static driver_t esp_dma_driver = {
"esp",
esp_dma_methods,
sizeof(struct esp_softc)
};
DRIVER_MODULE(esp, dma, esp_dma_driver, esp_devclass, 0, 0);
MODULE_DEPEND(esp, dma, 1, 1, 1);
static device_method_t esp_sbus_methods[] = {
DEVMETHOD(device_probe, esp_probe),
DEVMETHOD(device_attach, esp_sbus_attach),
DEVMETHOD(device_detach, esp_sbus_detach),
DEVMETHOD(device_suspend, esp_suspend),
DEVMETHOD(device_resume, esp_resume),
{0, 0}
};
static driver_t esp_sbus_driver = {
"esp",
esp_sbus_methods,
sizeof(struct esp_softc)
};
DRIVER_MODULE(esp, sbus, esp_sbus_driver, esp_devclass, 0, 0);
MODULE_DEPEND(esp, sbus, 1, 1, 1);
/*
* Functions and the switch for the MI code
*/
static u_char esp_read_reg(struct ncr53c9x_softc *sc, int reg);
static void esp_write_reg(struct ncr53c9x_softc *sc, int reg, u_char v);
static int esp_dma_isintr(struct ncr53c9x_softc *sc);
static void esp_dma_reset(struct ncr53c9x_softc *sc);
static int esp_dma_intr(struct ncr53c9x_softc *sc);
static int esp_dma_setup(struct ncr53c9x_softc *sc, caddr_t *addr,
size_t *len, int datain, size_t *dmasize);
static void esp_dma_go(struct ncr53c9x_softc *sc);
static void esp_dma_stop(struct ncr53c9x_softc *sc);
static int esp_dma_isactive(struct ncr53c9x_softc *sc);
static int espattach(struct esp_softc *esc,
const struct ncr53c9x_glue *gluep);
static int espdetach(struct esp_softc *esc);
static const struct ncr53c9x_glue esp_sbus_glue = {
esp_read_reg,
esp_write_reg,
esp_dma_isintr,
esp_dma_reset,
esp_dma_intr,
esp_dma_setup,
esp_dma_go,
esp_dma_stop,
esp_dma_isactive,
NULL, /* gl_clear_latched_intr */
};
static int
esp_probe(device_t dev)
{
const char *name;
name = ofw_bus_get_name(dev);
if (strcmp("SUNW,fas", name) == 0) {
device_set_desc(dev, "Sun FAS366 Fast-Wide SCSI");
return (BUS_PROBE_DEFAULT);
} else if (strcmp("esp", name) == 0) {
device_set_desc(dev, "Sun ESP SCSI/Sun FAS Fast-SCSI");
return (BUS_PROBE_DEFAULT);
}
return (ENXIO);
}
static int
esp_sbus_attach(device_t dev)
{
struct esp_softc *esc;
struct ncr53c9x_softc *sc;
struct lsi64854_softc *lsc;
device_t *children;
int error, i, nchildren;
esc = device_get_softc(dev);
sc = &esc->sc_ncr53c9x;
lsc = NULL;
esc->sc_dev = dev;
sc->sc_freq = sbus_get_clockfreq(dev);
if (strcmp(ofw_bus_get_name(dev), "SUNW,fas") == 0) {
/*
* Allocate space for DMA, in SUNW,fas there are no
* separate DMA devices.
*/
lsc = malloc(sizeof (struct lsi64854_softc), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (lsc == NULL) {
device_printf(dev, "out of memory (lsi64854_softc)\n");
return (ENOMEM);
}
esc->sc_dma = lsc;
/*
* SUNW,fas have 2 register spaces: DMA (lsi64854) and
* SCSI core (ncr53c9x).
*/
/* Allocate DMA registers. */
i = 0;
if ((lsc->sc_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&i, RF_ACTIVE)) == NULL) {
device_printf(dev, "cannot allocate DMA registers\n");
error = ENXIO;
goto fail_sbus_lsc;
}
/* Create a parent DMA tag based on this bus. */
error = bus_dma_tag_create(
bus_get_dma_tag(dev), /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
BUS_SPACE_MAXSIZE_32BIT, /* maxsize */
0, /* nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
NULL, NULL, /* no locking */
&lsc->sc_parent_dmat);
if (error != 0) {
device_printf(dev, "cannot allocate parent DMA tag\n");
goto fail_sbus_lres;
}
i = sbus_get_burstsz(dev);
#ifdef ESP_SBUS_DEBUG
printf("%s: burst 0x%x\n", __func__, i);
#endif
lsc->sc_burst = (i & SBUS_BURST_32) ? 32 :
(i & SBUS_BURST_16) ? 16 : 0;
lsc->sc_channel = L64854_CHANNEL_SCSI;
lsc->sc_client = sc;
lsc->sc_dev = dev;
/*
* Allocate SCSI core registers.
*/
i = 1;
if ((esc->sc_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&i, RF_ACTIVE)) == NULL) {
device_printf(dev,
"cannot allocate SCSI core registers\n");
error = ENXIO;
goto fail_sbus_lpdma;
}
} else {
/*
* Search accompanying DMA engine. It should have been
* already attached otherwise there isn't much we can do.
*/
if (device_get_children(device_get_parent(dev), &children,
&nchildren) != 0) {
device_printf(dev, "cannot determine siblings\n");
return (ENXIO);
}
for (i = 0; i < nchildren; i++) {
if (device_is_attached(children[i]) &&
sbus_get_slot(children[i]) == sbus_get_slot(dev) &&
strcmp(ofw_bus_get_name(children[i]), "dma") == 0) {
/* XXX hackery */
esc->sc_dma = (struct lsi64854_softc *)
device_get_softc(children[i]);
break;
}
}
free(children, M_TEMP);
if (esc->sc_dma == NULL) {
device_printf(dev, "cannot find DMA engine\n");
return (ENXIO);
}
esc->sc_dma->sc_client = sc;
/*
* Allocate SCSI core registers.
*/
i = 0;
if ((esc->sc_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&i, RF_ACTIVE)) == NULL) {
device_printf(dev,
"cannot allocate SCSI core registers\n");
return (ENXIO);
}
}
error = espattach(esc, &esp_sbus_glue);
if (error != 0) {
device_printf(dev, "espattach failed\n");
goto fail_sbus_eres;
}
return (0);
fail_sbus_eres:
bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(esc->sc_res),
esc->sc_res);
if (strcmp(ofw_bus_get_name(dev), "SUNW,fas") != 0)
return (error);
fail_sbus_lpdma:
bus_dma_tag_destroy(lsc->sc_parent_dmat);
fail_sbus_lres:
bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(lsc->sc_res),
lsc->sc_res);
fail_sbus_lsc:
free(lsc, M_DEVBUF);
return (error);
}
static int
esp_sbus_detach(device_t dev)
{
struct esp_softc *esc;
struct lsi64854_softc *lsc;
int error;
esc = device_get_softc(dev);
lsc = esc->sc_dma;
error = espdetach(esc);
if (error != 0)
return (error);
bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(esc->sc_res),
esc->sc_res);
if (strcmp(ofw_bus_get_name(dev), "SUNW,fas") != 0)
return (0);
bus_dma_tag_destroy(lsc->sc_parent_dmat);
bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(lsc->sc_res),
lsc->sc_res);
free(lsc, M_DEVBUF);
return (0);
}
static int
esp_dma_attach(device_t dev)
{
struct esp_softc *esc;
struct ncr53c9x_softc *sc;
int error, i;
esc = device_get_softc(dev);
sc = &esc->sc_ncr53c9x;
esc->sc_dev = dev;
if (OF_getprop(ofw_bus_get_node(dev), "clock-frequency",
&sc->sc_freq, sizeof(sc->sc_freq)) == -1) {
printf("failed to query OFW for clock-frequency\n");
return (ENXIO);
}
/* XXX hackery */
esc->sc_dma = (struct lsi64854_softc *)
device_get_softc(device_get_parent(dev));
esc->sc_dma->sc_client = sc;
/*
* Allocate SCSI core registers.
*/
i = 0;
if ((esc->sc_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&i, RF_ACTIVE)) == NULL) {
device_printf(dev, "cannot allocate SCSI core registers\n");
return (ENXIO);
}
error = espattach(esc, &esp_sbus_glue);
if (error != 0) {
device_printf(dev, "espattach failed\n");
goto fail_dma_eres;
}
return (0);
fail_dma_eres:
bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(esc->sc_res),
esc->sc_res);
return (error);
}
static int
esp_dma_detach(device_t dev)
{
struct esp_softc *esc;
int error;
esc = device_get_softc(dev);
error = espdetach(esc);
if (error != 0)
return (error);
bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(esc->sc_res),
esc->sc_res);
return (0);
}
static int
esp_suspend(device_t dev)
{
return (ENXIO);
}
static int
esp_resume(device_t dev)
{
return (ENXIO);
}
static int
espattach(struct esp_softc *esc, const struct ncr53c9x_glue *gluep)
{
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
unsigned int uid = 0;
int error, i;
NCR_LOCK_INIT(sc);
/* Attach the DMA engine. */
error = lsi64854_attach(esc->sc_dma);
if (error != 0) {
device_printf(esc->sc_dev, "lsi64854_attach failed\n");
goto fail_lock;
}
if (OF_getprop(ofw_bus_get_node(esc->sc_dev), "scsi-initiator-id",
&sc->sc_id, sizeof(sc->sc_id)) == -1)
sc->sc_id = 7;
#ifdef ESP_SBUS_DEBUG
device_printf(esc->sc_dev, "%s: sc_id %d, freq %d\n",
__func__, sc->sc_id, sc->sc_freq);
#endif
/*
* The `ESC' DMA chip must be reset before we can access
* the ESP registers.
*/
if (esc->sc_dma->sc_rev == DMAREV_ESC)
DMA_RESET(esc->sc_dma);
/*
* Set up glue for MI code early; we use some of it here.
*/
sc->sc_glue = gluep;
/* gimme MHz */
sc->sc_freq /= 1000000;
/*
* XXX More of this should be in ncr53c9x_attach(), but
* XXX should we really poke around the chip that much in
* XXX the MI code? Think about this more...
*/
/*
* Read the part-unique ID code of the SCSI chip. The contained
* value is only valid if all of the following conditions are met:
* - After power-up or chip reset.
* - Before any value is written to this register.
* - The NCRCFG2_FE bit is set.
* - A (NCRCMD_NOP | NCRCMD_DMA) command has been issued.
*/
NCRCMD(sc, NCRCMD_RSTCHIP);
NCRCMD(sc, NCRCMD_NOP);
sc->sc_cfg2 = NCRCFG2_FE;
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
NCRCMD(sc, NCRCMD_NOP | NCRCMD_DMA);
uid = NCR_READ_REG(sc, NCR_UID);
/*
* It is necessary to try to load the 2nd config register here,
* to find out what rev the esp chip is, else the ncr53c9x_reset
* will not set up the defaults correctly.
*/
sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
NCR_WRITE_REG(sc, NCR_CFG1, sc->sc_cfg1);
sc->sc_cfg2 = 0;
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_RPE;
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
if ((NCR_READ_REG(sc, NCR_CFG2) & ~NCRCFG2_RSVD) !=
(NCRCFG2_SCSI2 | NCRCFG2_RPE)) {
sc->sc_rev = NCR_VARIANT_ESP100;
} else {
sc->sc_cfg2 = NCRCFG2_SCSI2;
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
sc->sc_cfg3 = 0;
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
sc->sc_cfg3 = (NCRCFG3_CDB | NCRCFG3_FCLK);
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
if (NCR_READ_REG(sc, NCR_CFG3) !=
(NCRCFG3_CDB | NCRCFG3_FCLK)) {
sc->sc_rev = NCR_VARIANT_ESP100A;
} else {
/* NCRCFG2_FE enables > 64K transfers. */
sc->sc_cfg2 |= NCRCFG2_FE;
sc->sc_cfg3 = 0;
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
if (sc->sc_freq <= 25)
sc->sc_rev = NCR_VARIANT_ESP200;
else {
switch ((uid & 0xf8) >> 3) {
case 0x00:
sc->sc_rev = NCR_VARIANT_FAS100A;
break;
case 0x02:
if ((uid & 0x07) == 0x02)
sc->sc_rev = NCR_VARIANT_FAS216;
else
sc->sc_rev = NCR_VARIANT_FAS236;
break;
case 0x0a:
sc->sc_rev = NCR_VARIANT_FAS366;
break;
default:
/*
* We could just treat unknown chips
* as ESP200 but then we would most
* likely drive them out of specs.
*/
device_printf(esc->sc_dev,
"Unknown chip\n");
goto fail_lsi;
}
}
}
}
#ifdef ESP_SBUS_DEBUG
printf("%s: revision %d, uid 0x%x\n", __func__, sc->sc_rev, uid);
#endif
/*
* XXX minsync and maxxfer _should_ be set up in MI code,
* XXX but it appears to have some dependency on what sort
* XXX of DMA we're hooked up to, etc.
*/
/*
* This is the value used to start sync negotiations
* Note that the NCR register "SYNCTP" is programmed
* in "clocks per byte", and has a minimum value of 4.
* The SCSI period used in negotiation is one-fourth
* of the time (in nanoseconds) needed to transfer one byte.
* Since the chip's clock is given in MHz, we have the following
* formula: 4 * period = (1000 / freq) * 4
*/
sc->sc_minsync = 1000 / sc->sc_freq;
sc->sc_maxoffset = 15;
sc->sc_extended_geom = 1;
/*
* Alas, we must now modify the value a bit, because it's
* only valid when can switch on FASTCLK and FASTSCSI bits
* in config register 3...
*/
switch (sc->sc_rev) {
case NCR_VARIANT_ESP100:
sc->sc_maxwidth = MSG_EXT_WDTR_BUS_8_BIT;
sc->sc_maxxfer = 64 * 1024;
sc->sc_minsync = 0; /* No synch on old chip? */
break;
case NCR_VARIANT_ESP100A:
sc->sc_maxwidth = MSG_EXT_WDTR_BUS_8_BIT;
sc->sc_maxxfer = 64 * 1024;
/* Min clocks/byte is 5 */
sc->sc_minsync = ncr53c9x_cpb2stp(sc, 5);
break;
case NCR_VARIANT_ESP200:
sc->sc_maxwidth = MSG_EXT_WDTR_BUS_8_BIT;
sc->sc_maxxfer = 16 * 1024 * 1024;
/* Min clocks/byte is 5 */
sc->sc_minsync = ncr53c9x_cpb2stp(sc, 5);
break;
case NCR_VARIANT_FAS100A:
case NCR_VARIANT_FAS216:
case NCR_VARIANT_FAS236:
/*
* The onboard SCSI chips in Sun Ultra 1 are actually
* documented to be NCR53C9X which use NCRCFG3_FCLK and
* NCRCFG3_FSCSI. BSD/OS however probes these chips as
* FAS100A and uses NCRF9XCFG3_FCLK and NCRF9XCFG3_FSCSI
* instead which seems to be correct as otherwise sync
* negotiation just doesn't work. Using NCRF9XCFG3_FCLK
* and NCRF9XCFG3_FSCSI with these chips in fact also
* yields Fast-SCSI speed.
*/
sc->sc_features = NCR_F_FASTSCSI;
sc->sc_cfg3 = NCRF9XCFG3_FCLK;
sc->sc_cfg3_fscsi = NCRF9XCFG3_FSCSI;
sc->sc_maxwidth = MSG_EXT_WDTR_BUS_8_BIT;
sc->sc_maxxfer = 16 * 1024 * 1024;
break;
case NCR_VARIANT_FAS366:
sc->sc_maxwidth = MSG_EXT_WDTR_BUS_16_BIT;
sc->sc_maxxfer = 16 * 1024 * 1024;
break;
}
/* Establish interrupt channel. */
i = 0;
if ((esc->sc_irqres = bus_alloc_resource_any(esc->sc_dev, SYS_RES_IRQ,
&i, RF_SHAREABLE|RF_ACTIVE)) == NULL) {
device_printf(esc->sc_dev, "cannot allocate interrupt\n");
goto fail_lsi;
}
if (bus_setup_intr(esc->sc_dev, esc->sc_irqres,
INTR_MPSAFE | INTR_TYPE_CAM, NULL, ncr53c9x_intr, sc,
&esc->sc_irq)) {
device_printf(esc->sc_dev, "cannot set up interrupt\n");
error = ENXIO;
goto fail_ires;
}
/* Turn on target selection using the `DMA' method. */
if (sc->sc_rev != NCR_VARIANT_FAS366)
sc->sc_features |= NCR_F_DMASELECT;
/* Do the common parts of attachment. */
sc->sc_dev = esc->sc_dev;
error = ncr53c9x_attach(sc);
if (error != 0) {
device_printf(esc->sc_dev, "ncr53c9x_attach failed\n");
goto fail_intr;
}
return (0);
fail_intr:
bus_teardown_intr(esc->sc_dev, esc->sc_irqres, esc->sc_irq);
fail_ires:
bus_release_resource(esc->sc_dev, SYS_RES_IRQ,
rman_get_rid(esc->sc_irqres), esc->sc_irqres);
fail_lsi:
lsi64854_detach(esc->sc_dma);
fail_lock:
NCR_LOCK_DESTROY(sc);
return (error);
}
static int
espdetach(struct esp_softc *esc)
{
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
int error;
bus_teardown_intr(esc->sc_dev, esc->sc_irqres, esc->sc_irq);
error = ncr53c9x_detach(sc);
if (error != 0)
return (error);
error = lsi64854_detach(esc->sc_dma);
if (error != 0)
return (error);
NCR_LOCK_DESTROY(sc);
bus_release_resource(esc->sc_dev, SYS_RES_IRQ,
rman_get_rid(esc->sc_irqres), esc->sc_irqres);
return (0);
}
/*
* Glue functions
*/
#ifdef ESP_SBUS_DEBUG
static int esp_sbus_debug = 0;
static const struct {
char *r_name;
int r_flag;
} esp__read_regnames [] = {
{ "TCL", 0}, /* 0/00 */
{ "TCM", 0}, /* 1/04 */
{ "FIFO", 0}, /* 2/08 */
{ "CMD", 0}, /* 3/0c */
{ "STAT", 0}, /* 4/10 */
{ "INTR", 0}, /* 5/14 */
{ "STEP", 0}, /* 6/18 */
{ "FFLAGS", 1}, /* 7/1c */
{ "CFG1", 1}, /* 8/20 */
{ "STAT2", 0}, /* 9/24 */
{ "CFG4", 1}, /* a/28 */
{ "CFG2", 1}, /* b/2c */
{ "CFG3", 1}, /* c/30 */
{ "-none", 1}, /* d/34 */
{ "TCH", 1}, /* e/38 */
{ "TCX", 1}, /* f/3c */
};
static const struct {
char *r_name;
int r_flag;
} esp__write_regnames[] = {
{ "TCL", 1}, /* 0/00 */
{ "TCM", 1}, /* 1/04 */
{ "FIFO", 0}, /* 2/08 */
{ "CMD", 0}, /* 3/0c */
{ "SELID", 1}, /* 4/10 */
{ "TIMEOUT", 1}, /* 5/14 */
{ "SYNCTP", 1}, /* 6/18 */
{ "SYNCOFF", 1}, /* 7/1c */
{ "CFG1", 1}, /* 8/20 */
{ "CCF", 1}, /* 9/24 */
{ "TEST", 1}, /* a/28 */
{ "CFG2", 1}, /* b/2c */
{ "CFG3", 1}, /* c/30 */
{ "-none", 1}, /* d/34 */
{ "TCH", 1}, /* e/38 */
{ "TCX", 1}, /* f/3c */
};
#endif
static u_char
esp_read_reg(struct ncr53c9x_softc *sc, int reg)
{
struct esp_softc *esc = (struct esp_softc *)sc;
u_char v;
v = bus_read_1(esc->sc_res, reg * 4);
#ifdef ESP_SBUS_DEBUG
if (esp_sbus_debug && (reg < 0x10) && esp__read_regnames[reg].r_flag)
printf("RD:%x <%s> %x\n", reg * 4, ((unsigned)reg < 0x10) ?
esp__read_regnames[reg].r_name : "<***>", v);
#endif
return (v);
}
static void
esp_write_reg(struct ncr53c9x_softc *sc, int reg, u_char v)
{
struct esp_softc *esc = (struct esp_softc *)sc;
#ifdef ESP_SBUS_DEBUG
if (esp_sbus_debug && (reg < 0x10) && esp__write_regnames[reg].r_flag)
printf("WR:%x <%s> %x\n", reg * 4, ((unsigned)reg < 0x10) ?
esp__write_regnames[reg].r_name : "<***>", v);
#endif
bus_write_1(esc->sc_res, reg * 4, v);
}
static int
esp_dma_isintr(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
return (DMA_ISINTR(esc->sc_dma));
}
static void
esp_dma_reset(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
DMA_RESET(esc->sc_dma);
}
static int
esp_dma_intr(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
return (DMA_INTR(esc->sc_dma));
}
static int
esp_dma_setup(struct ncr53c9x_softc *sc, caddr_t *addr, size_t *len,
int datain, size_t *dmasize)
{
struct esp_softc *esc = (struct esp_softc *)sc;
return (DMA_SETUP(esc->sc_dma, addr, len, datain, dmasize));
}
static void
esp_dma_go(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
DMA_GO(esc->sc_dma);
}
static void
esp_dma_stop(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
L64854_SCSR(esc->sc_dma, L64854_GCSR(esc->sc_dma) & ~D_EN_DMA);
}
static int
esp_dma_isactive(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
return (DMA_ISACTIVE(esc->sc_dma));
}
Reference in New Issue View Git Blame Copy Permalink