FreeBSD src
1410ca560d
This implements hardware assisted quiet IE support. Quiet time is an optional interval on DFS channels (but doesn't have to be DFS only channels! sigh) where the station and AP can be quiet in order to allow for channel utilisation measurements. Typically that's stuff like radar detection, spectral scan, other-BSS frame sniffing, checking how busy the air is, etc. The hardware implements it as one of the generic timers, which is supplied a period, offset from the trigger period and duration to stay quiet. The AP can announce quiet time configurations which change, and so this code also tracks that. Implementation details: * track the current quiet time IE * compare the new one against the previous one - if only the TBTT counter changes, don't update things * If tbttcount=1 then program it into the hardware - that is when it is easiest to program the correct starting offset (one TBTT + configured offset). * .. later on check to see if it can be done on any tbttcount * If the IE goes away then remove the quiet timer and clear the config * Upon reset, state change, new beacon - clear quiet time IE and just let it resync from the next beacon. History: This was work done initially by sibridgetech.com in 2011/2012/2013 as part of some FreeBSD wifi DFS contracting work they had for a third party. They implemented the net80211 quiet time IE pieces and had some test code for the station side which didn't entirely use the timers correctly. I figured out how to use the timers correctly without stopping/starting the transmit DMA engine each time. When done correctly, the timer just needs to be programmed once and left alone until the next configuration change. So, thanks to Himali Patel and Parthiv Shah for their work way back then. I finally figured it out and finished it! TODO: * Now, I'd rather net80211 did the quiet time IE tracking and parsing, pushing configurations into the driver is needed. I'll look at doing that in a subsequent update. * This doesn't handle multiple quiet time IEs, which will currently just mess things up. I'll look into supporting that in the future (at least by only obeying "one" of them, and then ignoring subsequent IEs in a beacon/probe frame.) * This also implements the STA side and not the AP side - the AP side will come later, and involves taking various other intervals into account (eg the beacon offset for multi-VAP modes, the SWBA time, etc, etc) as well as obtaining the configuration when a beacon is configured/generated rather than "hearing" an IE. * .. investigate supporting quiet IE in mesh, tdma, ibss modes * .. investigate supporting quiet IE for non-DFS channels (so this can be done for say, 2GHz channels.) * Chances are i should commit NULL methods for the ar5210, ar5211 HALs.. Tested: * AR9380, STA mode - announcing quiet, removing quiet, changing quite time config, whilst doing iperf testing; * AR9380, AP mode. |
||
|---|---|---|
| bin | ||
| cddl | ||
| contrib | ||
| crypto | ||
| etc | ||
| gnu | ||
| include | ||
| kerberos5 | ||
| lib | ||
| libexec | ||
| release | ||
| rescue | ||
| sbin | ||
| secure | ||
| share | ||
| sys | ||
| targets | ||
| tests | ||
| tools | ||
| usr.bin | ||
| usr.sbin | ||
| .arcconfig | ||
| .arclint | ||
| COPYRIGHT | ||
| LOCKS | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc1 | ||
| Makefile.libcompat | ||
| ObsoleteFiles.inc | ||
| README | ||
| UPDATING | ||
This is the top level of the FreeBSD source directory. This file was last revised on: $FreeBSD$ For copyright information, please see the file COPYRIGHT in this directory (additional copyright information also exists for some sources in this tree - please see the specific source directories for more information). The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree. See build(7) and http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html for more information, including setting make(1) variables. The `buildkernel` and `installkernel` targets build and install the kernel and the modules (see below). Please see the top of the Makefile in this directory for more information on the standard build targets and compile-time flags. Building a kernel is a somewhat more involved process. See build(7), config(8), and http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html for more information. Note: If you want to build and install the kernel with the `buildkernel` and `installkernel` targets, you might need to build world before. More information is available in the handbook. The kernel configuration files reside in the sys/<arch>/conf sub-directory. GENERIC is the default configuration used in release builds. NOTES contains entries and documentation for all possible devices, not just those commonly used. Source Roadmap: --------------- bin System/user commands. cddl Various commands and libraries under the Common Development and Distribution License. contrib Packages contributed by 3rd parties. crypto Cryptography stuff (see crypto/README). etc Template files for /etc. gnu Various commands and libraries under the GNU Public License. Please see gnu/COPYING* for more information. include System include files. kerberos5 Kerberos5 (Heimdal) package. lib System libraries. libexec System daemons. release Release building Makefile & associated tools. rescue Build system for statically linked /rescue utilities. sbin System commands. secure Cryptographic libraries and commands. share Shared resources. sys Kernel sources. tests Regression tests which can be run by Kyua. See tests/README for additional information. tools Utilities for regression testing and miscellaneous tasks. usr.bin User commands. usr.sbin System administration commands. For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html