d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
14213e7d3e
freebsd-dev/sys/dev/sound/pci/csareg.h
Cameron Grant 20ac1df714 update this driver to use new firmware and incorporate many fixes. 
this works on cs4630 chips, and should implement the clkrun hack for
thinkpads- this will display diagnostic messages when triggered until its
correctness is established.
2001-05-30 22:38:31 +00:00

1955 lines
92 KiB
C
Raw Blame History

/*-
* Copyright (c) 1999 Seigo Tanimura
* All rights reserved.
*
* Portions of this source are based on hwdefs.h in cwcealdr1.zip, the
* sample source by Crystal Semiconductor.
* Copyright (c) 1996-1998 Crystal Semiconductor Corp.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _CSA_REG_H
#define _CSA_REG_H
/*
* The following constats are orginally in the sample by Crystal Semiconductor.
* Copyright (c) 1996-1998 Crystal Semiconductor Corp.
*/
/*****************************************************************************
*
* The following define the offsets of the registers accessed via base address
* register zero on the CS461x part.
*
*****************************************************************************/
#define BA0_HISR 0x00000000L
#define BA0_HSR0 0x00000004L
#define BA0_HICR 0x00000008L
#define BA0_DMSR 0x00000100L
#define BA0_HSAR 0x00000110L
#define BA0_HDAR 0x00000114L
#define BA0_HDMR 0x00000118L
#define BA0_HDCR 0x0000011CL
#define BA0_PFMC 0x00000200L
#define BA0_PFCV1 0x00000204L
#define BA0_PFCV2 0x00000208L
#define BA0_PCICFG00 0x00000300L
#define BA0_PCICFG04 0x00000304L
#define BA0_PCICFG08 0x00000308L
#define BA0_PCICFG0C 0x0000030CL
#define BA0_PCICFG10 0x00000310L
#define BA0_PCICFG14 0x00000314L
#define BA0_PCICFG18 0x00000318L
#define BA0_PCICFG1C 0x0000031CL
#define BA0_PCICFG20 0x00000320L
#define BA0_PCICFG24 0x00000324L
#define BA0_PCICFG28 0x00000328L
#define BA0_PCICFG2C 0x0000032CL
#define BA0_PCICFG30 0x00000330L
#define BA0_PCICFG34 0x00000334L
#define BA0_PCICFG38 0x00000338L
#define BA0_PCICFG3C 0x0000033CL
#define BA0_CLKCR1 0x00000400L
#define BA0_CLKCR2 0x00000404L
#define BA0_PLLM 0x00000408L
#define BA0_PLLCC 0x0000040CL
#define BA0_FRR 0x00000410L
#define BA0_CFL1 0x00000414L
#define BA0_CFL2 0x00000418L
#define BA0_SERMC1 0x00000420L
#define BA0_SERMC2 0x00000424L
#define BA0_SERC1 0x00000428L
#define BA0_SERC2 0x0000042CL
#define BA0_SERC3 0x00000430L
#define BA0_SERC4 0x00000434L
#define BA0_SERC5 0x00000438L
#define BA0_SERBSP 0x0000043CL
#define BA0_SERBST 0x00000440L
#define BA0_SERBCM 0x00000444L
#define BA0_SERBAD 0x00000448L
#define BA0_SERBCF 0x0000044CL
#define BA0_SERBWP 0x00000450L
#define BA0_SERBRP 0x00000454L
#ifndef NO_CS4612
#define BA0_ASER_FADDR 0x00000458L
#endif
#define BA0_ACCTL 0x00000460L
#define BA0_ACSTS 0x00000464L
#define BA0_ACOSV 0x00000468L
#define BA0_ACCAD 0x0000046CL
#define BA0_ACCDA 0x00000470L
#define BA0_ACISV 0x00000474L
#define BA0_ACSAD 0x00000478L
#define BA0_ACSDA 0x0000047CL
#define BA0_JSPT 0x00000480L
#define BA0_JSCTL 0x00000484L
#define BA0_JSC1 0x00000488L
#define BA0_JSC2 0x0000048CL
#define BA0_MIDCR 0x00000490L
#define BA0_MIDSR 0x00000494L
#define BA0_MIDWP 0x00000498L
#define BA0_MIDRP 0x0000049CL
#define BA0_JSIO 0x000004A0L
#ifndef NO_CS4612
#define BA0_ASER_MASTER 0x000004A4L
#endif
#define BA0_CFGI 0x000004B0L
#define BA0_SSVID 0x000004B4L
#define BA0_GPIOR 0x000004B8L
#ifndef NO_CS4612
#define BA0_EGPIODR 0x000004BCL
#define BA0_EGPIOPTR 0x000004C0L
#define BA0_EGPIOTR 0x000004C4L
#define BA0_EGPIOWR 0x000004C8L
#define BA0_EGPIOSR 0x000004CCL
#define BA0_SERC6 0x000004D0L
#define BA0_SERC7 0x000004D4L
#define BA0_SERACC 0x000004D8L
#define BA0_ACCTL2 0x000004E0L
#define BA0_ACSTS2 0x000004E4L
#define BA0_ACOSV2 0x000004E8L
#define BA0_ACCAD2 0x000004ECL
#define BA0_ACCDA2 0x000004F0L
#define BA0_ACISV2 0x000004F4L
#define BA0_ACSAD2 0x000004F8L
#define BA0_ACSDA2 0x000004FCL
#define BA0_IOTAC0 0x00000500L
#define BA0_IOTAC1 0x00000504L
#define BA0_IOTAC2 0x00000508L
#define BA0_IOTAC3 0x0000050CL
#define BA0_IOTAC4 0x00000510L
#define BA0_IOTAC5 0x00000514L
#define BA0_IOTAC6 0x00000518L
#define BA0_IOTAC7 0x0000051CL
#define BA0_IOTAC8 0x00000520L
#define BA0_IOTAC9 0x00000524L
#define BA0_IOTAC10 0x00000528L
#define BA0_IOTAC11 0x0000052CL
#define BA0_IOTFR0 0x00000540L
#define BA0_IOTFR1 0x00000544L
#define BA0_IOTFR2 0x00000548L
#define BA0_IOTFR3 0x0000054CL
#define BA0_IOTFR4 0x00000550L
#define BA0_IOTFR5 0x00000554L
#define BA0_IOTFR6 0x00000558L
#define BA0_IOTFR7 0x0000055CL
#define BA0_IOTFIFO 0x00000580L
#define BA0_IOTRRD 0x00000584L
#define BA0_IOTFP 0x00000588L
#define BA0_IOTCR 0x0000058CL
#define BA0_DPCID 0x00000590L
#define BA0_DPCIA 0x00000594L
#define BA0_DPCIC 0x00000598L
#define BA0_PCPCIR 0x00000600L
#define BA0_PCPCIG 0x00000604L
#define BA0_PCPCIEN 0x00000608L
#define BA0_EPCIPMC 0x00000610L
#endif
/*****************************************************************************
*
* The following define the offsets of the AC97 shadow registers, which appear
* as a virtual extension to the base address register zero memory range.
*
*****************************************************************************/
#define BA0_AC97_RESET 0x00001000L
#define BA0_AC97_MASTER_VOLUME 0x00001002L
#define BA0_AC97_HEADPHONE_VOLUME 0x00001004L
#define BA0_AC97_MASTER_VOLUME_MONO 0x00001006L
#define BA0_AC97_MASTER_TONE 0x00001008L
#define BA0_AC97_PC_BEEP_VOLUME 0x0000100AL
#define BA0_AC97_PHONE_VOLUME 0x0000100CL
#define BA0_AC97_MIC_VOLUME 0x0000100EL
#define BA0_AC97_LINE_IN_VOLUME 0x00001010L
#define BA0_AC97_CD_VOLUME 0x00001012L
#define BA0_AC97_VIDEO_VOLUME 0x00001014L
#define BA0_AC97_AUX_VOLUME 0x00001016L
#define BA0_AC97_PCM_OUT_VOLUME 0x00001018L
#define BA0_AC97_RECORD_SELECT 0x0000101AL
#define BA0_AC97_RECORD_GAIN 0x0000101CL
#define BA0_AC97_RECORD_GAIN_MIC 0x0000101EL
#define BA0_AC97_GENERAL_PURPOSE 0x00001020L
#define BA0_AC97_3D_CONTROL 0x00001022L
#define BA0_AC97_MODEM_RATE 0x00001024L
#define BA0_AC97_POWERDOWN 0x00001026L
#define BA0_AC97_RESERVED_28 0x00001028L
#define BA0_AC97_RESERVED_2A 0x0000102AL
#define BA0_AC97_RESERVED_2C 0x0000102CL
#define BA0_AC97_RESERVED_2E 0x0000102EL
#define BA0_AC97_RESERVED_30 0x00001030L
#define BA0_AC97_RESERVED_32 0x00001032L
#define BA0_AC97_RESERVED_34 0x00001034L
#define BA0_AC97_RESERVED_36 0x00001036L
#define BA0_AC97_RESERVED_38 0x00001038L
#define BA0_AC97_RESERVED_3A 0x0000103AL
#define BA0_AC97_RESERVED_3C 0x0000103CL
#define BA0_AC97_RESERVED_3E 0x0000103EL
#define BA0_AC97_RESERVED_40 0x00001040L
#define BA0_AC97_RESERVED_42 0x00001042L
#define BA0_AC97_RESERVED_44 0x00001044L
#define BA0_AC97_RESERVED_46 0x00001046L
#define BA0_AC97_RESERVED_48 0x00001048L
#define BA0_AC97_RESERVED_4A 0x0000104AL
#define BA0_AC97_RESERVED_4C 0x0000104CL
#define BA0_AC97_RESERVED_4E 0x0000104EL
#define BA0_AC97_RESERVED_50 0x00001050L
#define BA0_AC97_RESERVED_52 0x00001052L
#define BA0_AC97_RESERVED_54 0x00001054L
#define BA0_AC97_RESERVED_56 0x00001056L
#define BA0_AC97_RESERVED_58 0x00001058L
#define BA0_AC97_VENDOR_RESERVED_5A 0x0000105AL
#define BA0_AC97_VENDOR_RESERVED_5C 0x0000105CL
#define BA0_AC97_VENDOR_RESERVED_5E 0x0000105EL
#define BA0_AC97_VENDOR_RESERVED_60 0x00001060L
#define BA0_AC97_VENDOR_RESERVED_62 0x00001062L
#define BA0_AC97_VENDOR_RESERVED_64 0x00001064L
#define BA0_AC97_VENDOR_RESERVED_66 0x00001066L
#define BA0_AC97_VENDOR_RESERVED_68 0x00001068L
#define BA0_AC97_VENDOR_RESERVED_6A 0x0000106AL
#define BA0_AC97_VENDOR_RESERVED_6C 0x0000106CL
#define BA0_AC97_VENDOR_RESERVED_6E 0x0000106EL
#define BA0_AC97_VENDOR_RESERVED_70 0x00001070L
#define BA0_AC97_VENDOR_RESERVED_72 0x00001072L
#define BA0_AC97_VENDOR_RESERVED_74 0x00001074L
#define BA0_AC97_VENDOR_RESERVED_76 0x00001076L
#define BA0_AC97_VENDOR_RESERVED_78 0x00001078L
#define BA0_AC97_VENDOR_RESERVED_7A 0x0000107AL
#define BA0_AC97_VENDOR_ID1 0x0000107CL
#define BA0_AC97_VENDOR_ID2 0x0000107EL
/*****************************************************************************
*
* The following define the offsets of the registers and memories accessed via
* base address register one on the CS461x part.
*
*****************************************************************************/
#define BA1_SP_DMEM0 0x00000000L
#define BA1_SP_DMEM1 0x00010000L
#define BA1_SP_PMEM 0x00020000L
#define BA1_SPCR 0x00030000L
#define BA1_DREG 0x00030004L
#define BA1_DSRWP 0x00030008L
#define BA1_TWPR 0x0003000CL
#define BA1_SPWR 0x00030010L
#define BA1_SPIR 0x00030014L
#define BA1_FGR1 0x00030020L
#define BA1_SPCS 0x00030028L
#define BA1_SDSR 0x0003002CL
#define BA1_FRMT 0x00030030L
#define BA1_FRCC 0x00030034L
#define BA1_FRSC 0x00030038L
#define BA1_OMNI_MEM 0x000E0000L
/*****************************************************************************
*
* The following defines are for the flags in the PCI interrupt register.
*
*****************************************************************************/
#define PI_LINE_MASK 0x000000FFL
#define PI_PIN_MASK 0x0000FF00L
#define PI_MIN_GRANT_MASK 0x00FF0000L
#define PI_MAX_LATENCY_MASK 0xFF000000L
#define PI_LINE_SHIFT 0L
#define PI_PIN_SHIFT 8L
#define PI_MIN_GRANT_SHIFT 16L
#define PI_MAX_LATENCY_SHIFT 24L
/*****************************************************************************
*
* The following defines are for the flags in the host interrupt status
* register.
*
*****************************************************************************/
#define HISR_VC_MASK 0x0000FFFFL
#define HISR_VC0 0x00000001L
#define HISR_VC1 0x00000002L
#define HISR_VC2 0x00000004L
#define HISR_VC3 0x00000008L
#define HISR_VC4 0x00000010L
#define HISR_VC5 0x00000020L
#define HISR_VC6 0x00000040L
#define HISR_VC7 0x00000080L
#define HISR_VC8 0x00000100L
#define HISR_VC9 0x00000200L
#define HISR_VC10 0x00000400L
#define HISR_VC11 0x00000800L
#define HISR_VC12 0x00001000L
#define HISR_VC13 0x00002000L
#define HISR_VC14 0x00004000L
#define HISR_VC15 0x00008000L
#define HISR_INT0 0x00010000L
#define HISR_INT1 0x00020000L
#define HISR_DMAI 0x00040000L
#define HISR_FROVR 0x00080000L
#define HISR_MIDI 0x00100000L
#ifdef NO_CS4612
#define HISR_RESERVED 0x0FE00000L
#else
#define HISR_SBINT 0x00200000L
#define HISR_RESERVED 0x0FC00000L
#endif
#define HISR_H0P 0x40000000L
#define HISR_INTENA 0x80000000L
/*****************************************************************************
*
* The following defines are for the flags in the host signal register 0.
*
*****************************************************************************/
#define HSR0_VC_MASK 0xFFFFFFFFL
#define HSR0_VC16 0x00000001L
#define HSR0_VC17 0x00000002L
#define HSR0_VC18 0x00000004L
#define HSR0_VC19 0x00000008L
#define HSR0_VC20 0x00000010L
#define HSR0_VC21 0x00000020L
#define HSR0_VC22 0x00000040L
#define HSR0_VC23 0x00000080L
#define HSR0_VC24 0x00000100L
#define HSR0_VC25 0x00000200L
#define HSR0_VC26 0x00000400L
#define HSR0_VC27 0x00000800L
#define HSR0_VC28 0x00001000L
#define HSR0_VC29 0x00002000L
#define HSR0_VC30 0x00004000L
#define HSR0_VC31 0x00008000L
#define HSR0_VC32 0x00010000L
#define HSR0_VC33 0x00020000L
#define HSR0_VC34 0x00040000L
#define HSR0_VC35 0x00080000L
#define HSR0_VC36 0x00100000L
#define HSR0_VC37 0x00200000L
#define HSR0_VC38 0x00400000L
#define HSR0_VC39 0x00800000L
#define HSR0_VC40 0x01000000L
#define HSR0_VC41 0x02000000L
#define HSR0_VC42 0x04000000L
#define HSR0_VC43 0x08000000L
#define HSR0_VC44 0x10000000L
#define HSR0_VC45 0x20000000L
#define HSR0_VC46 0x40000000L
#define HSR0_VC47 0x80000000L
/*****************************************************************************
*
* The following defines are for the flags in the host interrupt control
* register.
*
*****************************************************************************/
#define HICR_IEV 0x00000001L
#define HICR_CHGM 0x00000002L
/*****************************************************************************
*
* The following defines are for the flags in the DMA status register.
*
*****************************************************************************/
#define DMSR_HP 0x00000001L
#define DMSR_HR 0x00000002L
#define DMSR_SP 0x00000004L
#define DMSR_SR 0x00000008L
/*****************************************************************************
*
* The following defines are for the flags in the host DMA source address
* register.
*
*****************************************************************************/
#define HSAR_HOST_ADDR_MASK 0xFFFFFFFFL
#define HSAR_DSP_ADDR_MASK 0x0000FFFFL
#define HSAR_MEMID_MASK 0x000F0000L
#define HSAR_MEMID_SP_DMEM0 0x00000000L
#define HSAR_MEMID_SP_DMEM1 0x00010000L
#define HSAR_MEMID_SP_PMEM 0x00020000L
#define HSAR_MEMID_SP_DEBUG 0x00030000L
#define HSAR_MEMID_OMNI_MEM 0x000E0000L
#define HSAR_END 0x40000000L
#define HSAR_ERR 0x80000000L
/*****************************************************************************
*
* The following defines are for the flags in the host DMA destination address
* register.
*
*****************************************************************************/
#define HDAR_HOST_ADDR_MASK 0xFFFFFFFFL
#define HDAR_DSP_ADDR_MASK 0x0000FFFFL
#define HDAR_MEMID_MASK 0x000F0000L
#define HDAR_MEMID_SP_DMEM0 0x00000000L
#define HDAR_MEMID_SP_DMEM1 0x00010000L
#define HDAR_MEMID_SP_PMEM 0x00020000L
#define HDAR_MEMID_SP_DEBUG 0x00030000L
#define HDAR_MEMID_OMNI_MEM 0x000E0000L
#define HDAR_END 0x40000000L
#define HDAR_ERR 0x80000000L
/*****************************************************************************
*
* The following defines are for the flags in the host DMA control register.
*
*****************************************************************************/
#define HDMR_AC_MASK 0x0000F000L
#define HDMR_AC_8_16 0x00001000L
#define HDMR_AC_M_S 0x00002000L
#define HDMR_AC_B_L 0x00004000L
#define HDMR_AC_S_U 0x00008000L
/*****************************************************************************
*
* The following defines are for the flags in the host DMA control register.
*
*****************************************************************************/
#define HDCR_COUNT_MASK 0x000003FFL
#define HDCR_DONE 0x00004000L
#define HDCR_OPT 0x00008000L
#define HDCR_WBD 0x00400000L
#define HDCR_WBS 0x00800000L
#define HDCR_DMS_MASK 0x07000000L
#define HDCR_DMS_LINEAR 0x00000000L
#define HDCR_DMS_16_DWORDS 0x01000000L
#define HDCR_DMS_32_DWORDS 0x02000000L
#define HDCR_DMS_64_DWORDS 0x03000000L
#define HDCR_DMS_128_DWORDS 0x04000000L
#define HDCR_DMS_256_DWORDS 0x05000000L
#define HDCR_DMS_512_DWORDS 0x06000000L
#define HDCR_DMS_1024_DWORDS 0x07000000L
#define HDCR_DH 0x08000000L
#define HDCR_SMS_MASK 0x70000000L
#define HDCR_SMS_LINEAR 0x00000000L
#define HDCR_SMS_16_DWORDS 0x10000000L
#define HDCR_SMS_32_DWORDS 0x20000000L
#define HDCR_SMS_64_DWORDS 0x30000000L
#define HDCR_SMS_128_DWORDS 0x40000000L
#define HDCR_SMS_256_DWORDS 0x50000000L
#define HDCR_SMS_512_DWORDS 0x60000000L
#define HDCR_SMS_1024_DWORDS 0x70000000L
#define HDCR_SH 0x80000000L
#define HDCR_COUNT_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the performance monitor control
* register.
*
*****************************************************************************/
#define PFMC_C1SS_MASK 0x0000001FL
#define PFMC_C1EV 0x00000020L
#define PFMC_C1RS 0x00008000L
#define PFMC_C2SS_MASK 0x001F0000L
#define PFMC_C2EV 0x00200000L
#define PFMC_C2RS 0x80000000L
#define PFMC_C1SS_SHIFT 0L
#define PFMC_C2SS_SHIFT 16L
#define PFMC_BUS_GRANT 0L
#define PFMC_GRANT_AFTER_REQ 1L
#define PFMC_TRANSACTION 2L
#define PFMC_DWORD_TRANSFER 3L
#define PFMC_SLAVE_READ 4L
#define PFMC_SLAVE_WRITE 5L
#define PFMC_PREEMPTION 6L
#define PFMC_DISCONNECT_RETRY 7L
#define PFMC_INTERRUPT 8L
#define PFMC_BUS_OWNERSHIP 9L
#define PFMC_TRANSACTION_LAG 10L
#define PFMC_PCI_CLOCK 11L
#define PFMC_SERIAL_CLOCK 12L
#define PFMC_SP_CLOCK 13L
/*****************************************************************************
*
* The following defines are for the flags in the performance counter value 1
* register.
*
*****************************************************************************/
#define PFCV1_PC1V_MASK 0xFFFFFFFFL
#define PFCV1_PC1V_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the performance counter value 2
* register.
*
*****************************************************************************/
#define PFCV2_PC2V_MASK 0xFFFFFFFFL
#define PFCV2_PC2V_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the clock control register 1.
*
*****************************************************************************/
#define CLKCR1_OSCS 0x00000001L
#define CLKCR1_OSCP 0x00000002L
#define CLKCR1_PLLSS_MASK 0x0000000CL
#define CLKCR1_PLLSS_SERIAL 0x00000000L
#define CLKCR1_PLLSS_CRYSTAL 0x00000004L
#define CLKCR1_PLLSS_PCI 0x00000008L
#define CLKCR1_PLLSS_RESERVED 0x0000000CL
#define CLKCR1_PLLP 0x00000010L
#define CLKCR1_SWCE 0x00000020L
#define CLKCR1_PLLOS 0x00000040L
/*****************************************************************************
*
* The following defines are for the flags in the clock control register 2.
*
*****************************************************************************/
#define CLKCR2_PDIVS_MASK 0x0000000FL
#define CLKCR2_PDIVS_1 0x00000001L
#define CLKCR2_PDIVS_2 0x00000002L
#define CLKCR2_PDIVS_4 0x00000004L
#define CLKCR2_PDIVS_7 0x00000007L
#define CLKCR2_PDIVS_8 0x00000008L
#define CLKCR2_PDIVS_16 0x00000000L
/*****************************************************************************
*
* The following defines are for the flags in the PLL multiplier register.
*
*****************************************************************************/
#define PLLM_MASK 0x000000FFL
#define PLLM_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the PLL capacitor coefficient
* register.
*
*****************************************************************************/
#define PLLCC_CDR_MASK 0x00000007L
#ifndef NO_CS4610
#define PLLCC_CDR_240_350_MHZ 0x00000000L
#define PLLCC_CDR_184_265_MHZ 0x00000001L
#define PLLCC_CDR_144_205_MHZ 0x00000002L
#define PLLCC_CDR_111_160_MHZ 0x00000003L
#define PLLCC_CDR_87_123_MHZ 0x00000004L
#define PLLCC_CDR_67_96_MHZ 0x00000005L
#define PLLCC_CDR_52_74_MHZ 0x00000006L
#define PLLCC_CDR_45_58_MHZ 0x00000007L
#endif
#ifndef NO_CS4612
#define PLLCC_CDR_271_398_MHZ 0x00000000L
#define PLLCC_CDR_227_330_MHZ 0x00000001L
#define PLLCC_CDR_167_239_MHZ 0x00000002L
#define PLLCC_CDR_150_215_MHZ 0x00000003L
#define PLLCC_CDR_107_154_MHZ 0x00000004L
#define PLLCC_CDR_98_140_MHZ 0x00000005L
#define PLLCC_CDR_73_104_MHZ 0x00000006L
#define PLLCC_CDR_63_90_MHZ 0x00000007L
#endif
#define PLLCC_LPF_MASK 0x000000F8L
#ifndef NO_CS4610
#define PLLCC_LPF_23850_60000_KHZ 0x00000000L
#define PLLCC_LPF_7960_26290_KHZ 0x00000008L
#define PLLCC_LPF_4160_10980_KHZ 0x00000018L
#define PLLCC_LPF_1740_4580_KHZ 0x00000038L
#define PLLCC_LPF_724_1910_KHZ 0x00000078L
#define PLLCC_LPF_317_798_KHZ 0x000000F8L
#endif
#ifndef NO_CS4612
#define PLLCC_LPF_25580_64530_KHZ 0x00000000L
#define PLLCC_LPF_14360_37270_KHZ 0x00000008L
#define PLLCC_LPF_6100_16020_KHZ 0x00000018L
#define PLLCC_LPF_2540_6690_KHZ 0x00000038L
#define PLLCC_LPF_1050_2780_KHZ 0x00000078L
#define PLLCC_LPF_450_1160_KHZ 0x000000F8L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the feature reporting register.
*
*****************************************************************************/
#define FRR_FAB_MASK 0x00000003L
#define FRR_MASK_MASK 0x0000001CL
#ifdef NO_CS4612
#define FRR_CFOP_MASK 0x000000E0L
#else
#define FRR_CFOP_MASK 0x00000FE0L
#endif
#define FRR_CFOP_NOT_DVD 0x00000020L
#define FRR_CFOP_A3D 0x00000040L
#define FRR_CFOP_128_PIN 0x00000080L
#ifndef NO_CS4612
#define FRR_CFOP_CS4280 0x00000800L
#endif
#define FRR_FAB_SHIFT 0L
#define FRR_MASK_SHIFT 2L
#define FRR_CFOP_SHIFT 5L
/*****************************************************************************
*
* The following defines are for the flags in the configuration load 1
* register.
*
*****************************************************************************/
#define CFL1_CLOCK_SOURCE_MASK 0x00000003L
#define CFL1_CLOCK_SOURCE_CS423X 0x00000000L
#define CFL1_CLOCK_SOURCE_AC97 0x00000001L
#define CFL1_CLOCK_SOURCE_CRYSTAL 0x00000002L
#define CFL1_CLOCK_SOURCE_DUAL_AC97 0x00000003L
#define CFL1_VALID_DATA_MASK 0x000000FFL
/*****************************************************************************
*
* The following defines are for the flags in the configuration load 2
* register.
*
*****************************************************************************/
#define CFL2_VALID_DATA_MASK 0x000000FFL
/*****************************************************************************
*
* The following defines are for the flags in the serial port master control
* register 1.
*
*****************************************************************************/
#define SERMC1_MSPE 0x00000001L
#define SERMC1_PTC_MASK 0x0000000EL
#define SERMC1_PTC_CS423X 0x00000000L
#define SERMC1_PTC_AC97 0x00000002L
#define SERMC1_PTC_DAC 0x00000004L
#define SERMC1_PLB 0x00000010L
#define SERMC1_XLB 0x00000020L
/*****************************************************************************
*
* The following defines are for the flags in the serial port master control
* register 2.
*
*****************************************************************************/
#define SERMC2_LROE 0x00000001L
#define SERMC2_MCOE 0x00000002L
#define SERMC2_MCDIV 0x00000004L
/*****************************************************************************
*
* The following defines are for the flags in the serial port 1 configuration
* register.
*
*****************************************************************************/
#define SERC1_SO1EN 0x00000001L
#define SERC1_SO1F_MASK 0x0000000EL
#define SERC1_SO1F_CS423X 0x00000000L
#define SERC1_SO1F_AC97 0x00000002L
#define SERC1_SO1F_DAC 0x00000004L
#define SERC1_SO1F_SPDIF 0x00000006L
/*****************************************************************************
*
* The following defines are for the flags in the serial port 2 configuration
* register.
*
*****************************************************************************/
#define SERC2_SI1EN 0x00000001L
#define SERC2_SI1F_MASK 0x0000000EL
#define SERC2_SI1F_CS423X 0x00000000L
#define SERC2_SI1F_AC97 0x00000002L
#define SERC2_SI1F_ADC 0x00000004L
#define SERC2_SI1F_SPDIF 0x00000006L
/*****************************************************************************
*
* The following defines are for the flags in the serial port 3 configuration
* register.
*
*****************************************************************************/
#define SERC3_SO2EN 0x00000001L
#define SERC3_SO2F_MASK 0x00000006L
#define SERC3_SO2F_DAC 0x00000000L
#define SERC3_SO2F_SPDIF 0x00000002L
/*****************************************************************************
*
* The following defines are for the flags in the serial port 4 configuration
* register.
*
*****************************************************************************/
#define SERC4_SO3EN 0x00000001L
#define SERC4_SO3F_MASK 0x00000006L
#define SERC4_SO3F_DAC 0x00000000L
#define SERC4_SO3F_SPDIF 0x00000002L
/*****************************************************************************
*
* The following defines are for the flags in the serial port 5 configuration
* register.
*
*****************************************************************************/
#define SERC5_SI2EN 0x00000001L
#define SERC5_SI2F_MASK 0x00000006L
#define SERC5_SI2F_ADC 0x00000000L
#define SERC5_SI2F_SPDIF 0x00000002L
/*****************************************************************************
*
* The following defines are for the flags in the serial port backdoor sample
* pointer register.
*
*****************************************************************************/
#define SERBSP_FSP_MASK 0x0000000FL
#define SERBSP_FSP_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the serial port backdoor status
* register.
*
*****************************************************************************/
#define SERBST_RRDY 0x00000001L
#define SERBST_WBSY 0x00000002L
/*****************************************************************************
*
* The following defines are for the flags in the serial port backdoor command
* register.
*
*****************************************************************************/
#define SERBCM_RDC 0x00000001L
#define SERBCM_WRC 0x00000002L
/*****************************************************************************
*
* The following defines are for the flags in the serial port backdoor address
* register.
*
*****************************************************************************/
#ifdef NO_CS4612
#define SERBAD_FAD_MASK 0x000000FFL
#else
#define SERBAD_FAD_MASK 0x000001FFL
#endif
#define SERBAD_FAD_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the serial port backdoor
* configuration register.
*
*****************************************************************************/
#define SERBCF_HBP 0x00000001L
/*****************************************************************************
*
* The following defines are for the flags in the serial port backdoor write
* port register.
*
*****************************************************************************/
#define SERBWP_FWD_MASK 0x000FFFFFL
#define SERBWP_FWD_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the serial port backdoor read
* port register.
*
*****************************************************************************/
#define SERBRP_FRD_MASK 0x000FFFFFL
#define SERBRP_FRD_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the async FIFO address register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define ASER_FADDR_A1_MASK 0x000001FFL
#define ASER_FADDR_EN1 0x00008000L
#define ASER_FADDR_A2_MASK 0x01FF0000L
#define ASER_FADDR_EN2 0x80000000L
#define ASER_FADDR_A1_SHIFT 0L
#define ASER_FADDR_A2_SHIFT 16L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the AC97 control register.
*
*****************************************************************************/
#define ACCTL_RSTN 0x00000001L
#define ACCTL_ESYN 0x00000002L
#define ACCTL_VFRM 0x00000004L
#define ACCTL_DCV 0x00000008L
#define ACCTL_CRW 0x00000010L
#define ACCTL_ASYN 0x00000020L
#ifndef NO_CS4612
#define ACCTL_TC 0x00000040L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the AC97 status register.
*
*****************************************************************************/
#define ACSTS_CRDY 0x00000001L
#define ACSTS_VSTS 0x00000002L
#ifndef NO_CS4612
#define ACSTS_WKUP 0x00000004L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the AC97 output slot valid
* register.
*
*****************************************************************************/
#define ACOSV_SLV3 0x00000001L
#define ACOSV_SLV4 0x00000002L
#define ACOSV_SLV5 0x00000004L
#define ACOSV_SLV6 0x00000008L
#define ACOSV_SLV7 0x00000010L
#define ACOSV_SLV8 0x00000020L
#define ACOSV_SLV9 0x00000040L
#define ACOSV_SLV10 0x00000080L
#define ACOSV_SLV11 0x00000100L
#define ACOSV_SLV12 0x00000200L
/*****************************************************************************
*
* The following defines are for the flags in the AC97 command address
* register.
*
*****************************************************************************/
#define ACCAD_CI_MASK 0x0000007FL
#define ACCAD_CI_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the AC97 command data register.
*
*****************************************************************************/
#define ACCDA_CD_MASK 0x0000FFFFL
#define ACCDA_CD_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the AC97 input slot valid
* register.
*
*****************************************************************************/
#define ACISV_ISV3 0x00000001L
#define ACISV_ISV4 0x00000002L
#define ACISV_ISV5 0x00000004L
#define ACISV_ISV6 0x00000008L
#define ACISV_ISV7 0x00000010L
#define ACISV_ISV8 0x00000020L
#define ACISV_ISV9 0x00000040L
#define ACISV_ISV10 0x00000080L
#define ACISV_ISV11 0x00000100L
#define ACISV_ISV12 0x00000200L
/*****************************************************************************
*
* The following defines are for the flags in the AC97 status address
* register.
*
*****************************************************************************/
#define ACSAD_SI_MASK 0x0000007FL
#define ACSAD_SI_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the AC97 status data register.
*
*****************************************************************************/
#define ACSDA_SD_MASK 0x0000FFFFL
#define ACSDA_SD_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the joystick poll/trigger
* register.
*
*****************************************************************************/
#define JSPT_CAX 0x00000001L
#define JSPT_CAY 0x00000002L
#define JSPT_CBX 0x00000004L
#define JSPT_CBY 0x00000008L
#define JSPT_BA1 0x00000010L
#define JSPT_BA2 0x00000020L
#define JSPT_BB1 0x00000040L
#define JSPT_BB2 0x00000080L
/*****************************************************************************
*
* The following defines are for the flags in the joystick control register.
*
*****************************************************************************/
#define JSCTL_SP_MASK 0x00000003L
#define JSCTL_SP_SLOW 0x00000000L
#define JSCTL_SP_MEDIUM_SLOW 0x00000001L
#define JSCTL_SP_MEDIUM_FAST 0x00000002L
#define JSCTL_SP_FAST 0x00000003L
#define JSCTL_ARE 0x00000004L
/*****************************************************************************
*
* The following defines are for the flags in the joystick coordinate pair 1
* readback register.
*
*****************************************************************************/
#define JSC1_Y1V_MASK 0x0000FFFFL
#define JSC1_X1V_MASK 0xFFFF0000L
#define JSC1_Y1V_SHIFT 0L
#define JSC1_X1V_SHIFT 16L
/*****************************************************************************
*
* The following defines are for the flags in the joystick coordinate pair 2
* readback register.
*
*****************************************************************************/
#define JSC2_Y2V_MASK 0x0000FFFFL
#define JSC2_X2V_MASK 0xFFFF0000L
#define JSC2_Y2V_SHIFT 0L
#define JSC2_X2V_SHIFT 16L
/*****************************************************************************
*
* The following defines are for the flags in the MIDI control register.
*
*****************************************************************************/
#define MIDCR_TXE 0x00000001L
#define MIDCR_RXE 0x00000002L
#define MIDCR_RIE 0x00000004L
#define MIDCR_TIE 0x00000008L
#define MIDCR_MLB 0x00000010L
#define MIDCR_MRST 0x00000020L
/*****************************************************************************
*
* The following defines are for the flags in the MIDI status register.
*
*****************************************************************************/
#define MIDSR_TBF 0x00000001L
#define MIDSR_RBE 0x00000002L
/*****************************************************************************
*
* The following defines are for the flags in the MIDI write port register.
*
*****************************************************************************/
#define MIDWP_MWD_MASK 0x000000FFL
#define MIDWP_MWD_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the MIDI read port register.
*
*****************************************************************************/
#define MIDRP_MRD_MASK 0x000000FFL
#define MIDRP_MRD_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the joystick GPIO register.
*
*****************************************************************************/
#define JSIO_DAX 0x00000001L
#define JSIO_DAY 0x00000002L
#define JSIO_DBX 0x00000004L
#define JSIO_DBY 0x00000008L
#define JSIO_AXOE 0x00000010L
#define JSIO_AYOE 0x00000020L
#define JSIO_BXOE 0x00000040L
#define JSIO_BYOE 0x00000080L
/*****************************************************************************
*
* The following defines are for the flags in the master async/sync serial
* port enable register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define ASER_MASTER_ME 0x00000001L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the configuration interface
* register.
*
*****************************************************************************/
#define CFGI_CLK 0x00000001L
#define CFGI_DOUT 0x00000002L
#define CFGI_DIN_EEN 0x00000004L
#define CFGI_EELD 0x00000008L
/*****************************************************************************
*
* The following defines are for the flags in the subsystem ID and vendor ID
* register.
*
*****************************************************************************/
#define SSVID_VID_MASK 0x0000FFFFL
#define SSVID_SID_MASK 0xFFFF0000L
#define SSVID_VID_SHIFT 0L
#define SSVID_SID_SHIFT 16L
/*****************************************************************************
*
* The following defines are for the flags in the GPIO pin interface register.
*
*****************************************************************************/
#define GPIOR_VOLDN 0x00000001L
#define GPIOR_VOLUP 0x00000002L
#define GPIOR_SI2D 0x00000004L
#define GPIOR_SI2OE 0x00000008L
/*****************************************************************************
*
* The following defines are for the flags in the extended GPIO pin direction
* register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define EGPIODR_GPOE0 0x00000001L
#define EGPIODR_GPOE1 0x00000002L
#define EGPIODR_GPOE2 0x00000004L
#define EGPIODR_GPOE3 0x00000008L
#define EGPIODR_GPOE4 0x00000010L
#define EGPIODR_GPOE5 0x00000020L
#define EGPIODR_GPOE6 0x00000040L
#define EGPIODR_GPOE7 0x00000080L
#define EGPIODR_GPOE8 0x00000100L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the extended GPIO pin polarity/
* type register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define EGPIOPTR_GPPT0 0x00000001L
#define EGPIOPTR_GPPT1 0x00000002L
#define EGPIOPTR_GPPT2 0x00000004L
#define EGPIOPTR_GPPT3 0x00000008L
#define EGPIOPTR_GPPT4 0x00000010L
#define EGPIOPTR_GPPT5 0x00000020L
#define EGPIOPTR_GPPT6 0x00000040L
#define EGPIOPTR_GPPT7 0x00000080L
#define EGPIOPTR_GPPT8 0x00000100L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the extended GPIO pin sticky
* register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define EGPIOTR_GPS0 0x00000001L
#define EGPIOTR_GPS1 0x00000002L
#define EGPIOTR_GPS2 0x00000004L
#define EGPIOTR_GPS3 0x00000008L
#define EGPIOTR_GPS4 0x00000010L
#define EGPIOTR_GPS5 0x00000020L
#define EGPIOTR_GPS6 0x00000040L
#define EGPIOTR_GPS7 0x00000080L
#define EGPIOTR_GPS8 0x00000100L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the extended GPIO ping wakeup
* register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define EGPIOWR_GPW0 0x00000001L
#define EGPIOWR_GPW1 0x00000002L
#define EGPIOWR_GPW2 0x00000004L
#define EGPIOWR_GPW3 0x00000008L
#define EGPIOWR_GPW4 0x00000010L
#define EGPIOWR_GPW5 0x00000020L
#define EGPIOWR_GPW6 0x00000040L
#define EGPIOWR_GPW7 0x00000080L
#define EGPIOWR_GPW8 0x00000100L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the extended GPIO pin status
* register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define EGPIOSR_GPS0 0x00000001L
#define EGPIOSR_GPS1 0x00000002L
#define EGPIOSR_GPS2 0x00000004L
#define EGPIOSR_GPS3 0x00000008L
#define EGPIOSR_GPS4 0x00000010L
#define EGPIOSR_GPS5 0x00000020L
#define EGPIOSR_GPS6 0x00000040L
#define EGPIOSR_GPS7 0x00000080L
#define EGPIOSR_GPS8 0x00000100L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the serial port 6 configuration
* register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define SERC6_ASDO2EN 0x00000001L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the serial port 7 configuration
* register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define SERC7_ASDI2EN 0x00000001L
#define SERC7_POSILB 0x00000002L
#define SERC7_SIPOLB 0x00000004L
#define SERC7_SOSILB 0x00000008L
#define SERC7_SISOLB 0x00000010L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the serial port AC link
* configuration register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define SERACC_CODEC_TYPE_MASK 0x00000001L
#define SERACC_CODEC_TYPE_1_03 0x00000000L
#define SERACC_CODEC_TYPE_2_0 0x00000001L
#define SERACC_TWO_CODECS 0x00000002L
#define SERACC_MDM 0x00000004L
#define SERACC_HSP 0x00000008L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the AC97 control register 2.
*
*****************************************************************************/
#ifndef NO_CS4612
#define ACCTL2_RSTN 0x00000001L
#define ACCTL2_ESYN 0x00000002L
#define ACCTL2_VFRM 0x00000004L
#define ACCTL2_DCV 0x00000008L
#define ACCTL2_CRW 0x00000010L
#define ACCTL2_ASYN 0x00000020L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the AC97 status register 2.
*
*****************************************************************************/
#ifndef NO_CS4612
#define ACSTS2_CRDY 0x00000001L
#define ACSTS2_VSTS 0x00000002L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the AC97 output slot valid
* register 2.
*
*****************************************************************************/
#ifndef NO_CS4612
#define ACOSV2_SLV3 0x00000001L
#define ACOSV2_SLV4 0x00000002L
#define ACOSV2_SLV5 0x00000004L
#define ACOSV2_SLV6 0x00000008L
#define ACOSV2_SLV7 0x00000010L
#define ACOSV2_SLV8 0x00000020L
#define ACOSV2_SLV9 0x00000040L
#define ACOSV2_SLV10 0x00000080L
#define ACOSV2_SLV11 0x00000100L
#define ACOSV2_SLV12 0x00000200L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the AC97 command address
* register 2.
*
*****************************************************************************/
#ifndef NO_CS4612
#define ACCAD2_CI_MASK 0x0000007FL
#define ACCAD2_CI_SHIFT 0L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the AC97 command data register
* 2.
*
*****************************************************************************/
#ifndef NO_CS4612
#define ACCDA2_CD_MASK 0x0000FFFFL
#define ACCDA2_CD_SHIFT 0L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the AC97 input slot valid
* register 2.
*
*****************************************************************************/
#ifndef NO_CS4612
#define ACISV2_ISV3 0x00000001L
#define ACISV2_ISV4 0x00000002L
#define ACISV2_ISV5 0x00000004L
#define ACISV2_ISV6 0x00000008L
#define ACISV2_ISV7 0x00000010L
#define ACISV2_ISV8 0x00000020L
#define ACISV2_ISV9 0x00000040L
#define ACISV2_ISV10 0x00000080L
#define ACISV2_ISV11 0x00000100L
#define ACISV2_ISV12 0x00000200L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the AC97 status address
* register 2.
*
*****************************************************************************/
#ifndef NO_CS4612
#define ACSAD2_SI_MASK 0x0000007FL
#define ACSAD2_SI_SHIFT 0L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the AC97 status data register 2.
*
*****************************************************************************/
#ifndef NO_CS4612
#define ACSDA2_SD_MASK 0x0000FFFFL
#define ACSDA2_SD_SHIFT 0L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the I/O trap address and control
* registers (all 12).
*
*****************************************************************************/
#ifndef NO_CS4612
#define IOTAC_SA_MASK 0x0000FFFFL
#define IOTAC_MSK_MASK 0x000F0000L
#define IOTAC_IODC_MASK 0x06000000L
#define IOTAC_IODC_16_BIT 0x00000000L
#define IOTAC_IODC_10_BIT 0x02000000L
#define IOTAC_IODC_12_BIT 0x04000000L
#define IOTAC_WSPI 0x08000000L
#define IOTAC_RSPI 0x10000000L
#define IOTAC_WSE 0x20000000L
#define IOTAC_WE 0x40000000L
#define IOTAC_RE 0x80000000L
#define IOTAC_SA_SHIFT 0L
#define IOTAC_MSK_SHIFT 16L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the I/O trap fast read registers
* (all 8).
*
*****************************************************************************/
#ifndef NO_CS4612
#define IOTFR_D_MASK 0x0000FFFFL
#define IOTFR_A_MASK 0x000F0000L
#define IOTFR_R_MASK 0x0F000000L
#define IOTFR_ALL 0x40000000L
#define IOTFR_VL 0x80000000L
#define IOTFR_D_SHIFT 0L
#define IOTFR_A_SHIFT 16L
#define IOTFR_R_SHIFT 24L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the I/O trap FIFO register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define IOTFIFO_BA_MASK 0x00003FFFL
#define IOTFIFO_S_MASK 0x00FF0000L
#define IOTFIFO_OF 0x40000000L
#define IOTFIFO_SPIOF 0x80000000L
#define IOTFIFO_BA_SHIFT 0L
#define IOTFIFO_S_SHIFT 16L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the I/O trap retry read data
* register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define IOTRRD_D_MASK 0x0000FFFFL
#define IOTRRD_RDV 0x80000000L
#define IOTRRD_D_SHIFT 0L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the I/O trap FIFO pointer
* register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define IOTFP_CA_MASK 0x00003FFFL
#define IOTFP_PA_MASK 0x3FFF0000L
#define IOTFP_CA_SHIFT 0L
#define IOTFP_PA_SHIFT 16L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the I/O trap control register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define IOTCR_ITD 0x00000001L
#define IOTCR_HRV 0x00000002L
#define IOTCR_SRV 0x00000004L
#define IOTCR_DTI 0x00000008L
#define IOTCR_DFI 0x00000010L
#define IOTCR_DDP 0x00000020L
#define IOTCR_JTE 0x00000040L
#define IOTCR_PPE 0x00000080L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the direct PCI data register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define DPCID_D_MASK 0xFFFFFFFFL
#define DPCID_D_SHIFT 0L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the direct PCI address register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define DPCIA_A_MASK 0xFFFFFFFFL
#define DPCIA_A_SHIFT 0L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the direct PCI command register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define DPCIC_C_MASK 0x0000000FL
#define DPCIC_C_IOREAD 0x00000002L
#define DPCIC_C_IOWRITE 0x00000003L
#define DPCIC_BE_MASK 0x000000F0L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the PC/PCI request register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define PCPCIR_RDC_MASK 0x00000007L
#define PCPCIR_C_MASK 0x00007000L
#define PCPCIR_REQ 0x00008000L
#define PCPCIR_RDC_SHIFT 0L
#define PCPCIR_C_SHIFT 12L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the PC/PCI grant register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define PCPCIG_GDC_MASK 0x00000007L
#define PCPCIG_VL 0x00008000L
#define PCPCIG_GDC_SHIFT 0L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the PC/PCI master enable
* register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define PCPCIEN_EN 0x00000001L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the extended PCI power
* management control register.
*
*****************************************************************************/
#ifndef NO_CS4612
#define EPCIPMC_GWU 0x00000001L
#define EPCIPMC_FSPC 0x00000002L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the SP control register.
*
*****************************************************************************/
#define SPCR_RUN 0x00000001L
#define SPCR_STPFR 0x00000002L
#define SPCR_RUNFR 0x00000004L
#define SPCR_TICK 0x00000008L
#define SPCR_DRQEN 0x00000020L
#define SPCR_RSTSP 0x00000040L
#define SPCR_OREN 0x00000080L
#ifndef NO_CS4612
#define SPCR_PCIINT 0x00000100L
#define SPCR_OINTD 0x00000200L
#define SPCR_CRE 0x00008000L
#endif
/*****************************************************************************
*
* The following defines are for the flags in the debug index register.
*
*****************************************************************************/
#define DREG_REGID_MASK 0x0000007FL
#define DREG_DEBUG 0x00000080L
#define DREG_RGBK_MASK 0x00000700L
#define DREG_TRAP 0x00000800L
#if !defined(NO_CS4612)
#if !defined(NO_CS4615)
#define DREG_TRAPX 0x00001000L
#endif
#endif
#define DREG_REGID_SHIFT 0L
#define DREG_RGBK_SHIFT 8L
#define DREG_RGBK_REGID_MASK 0x0000077FL
#define DREG_REGID_R0 0x00000010L
#define DREG_REGID_R1 0x00000011L
#define DREG_REGID_R2 0x00000012L
#define DREG_REGID_R3 0x00000013L
#define DREG_REGID_R4 0x00000014L
#define DREG_REGID_R5 0x00000015L
#define DREG_REGID_R6 0x00000016L
#define DREG_REGID_R7 0x00000017L
#define DREG_REGID_R8 0x00000018L
#define DREG_REGID_R9 0x00000019L
#define DREG_REGID_RA 0x0000001AL
#define DREG_REGID_RB 0x0000001BL
#define DREG_REGID_RC 0x0000001CL
#define DREG_REGID_RD 0x0000001DL
#define DREG_REGID_RE 0x0000001EL
#define DREG_REGID_RF 0x0000001FL
#define DREG_REGID_RA_BUS_LOW 0x00000020L
#define DREG_REGID_RA_BUS_HIGH 0x00000038L
#define DREG_REGID_YBUS_LOW 0x00000050L
#define DREG_REGID_YBUS_HIGH 0x00000058L
#define DREG_REGID_TRAP_0 0x00000100L
#define DREG_REGID_TRAP_1 0x00000101L
#define DREG_REGID_TRAP_2 0x00000102L
#define DREG_REGID_TRAP_3 0x00000103L
#define DREG_REGID_TRAP_4 0x00000104L
#define DREG_REGID_TRAP_5 0x00000105L
#define DREG_REGID_TRAP_6 0x00000106L
#define DREG_REGID_TRAP_7 0x00000107L
#define DREG_REGID_INDIRECT_ADDRESS 0x0000010EL
#define DREG_REGID_TOP_OF_STACK 0x0000010FL
#if !defined(NO_CS4612)
#if !defined(NO_CS4615)
#define DREG_REGID_TRAP_8 0x00000110L
#define DREG_REGID_TRAP_9 0x00000111L
#define DREG_REGID_TRAP_10 0x00000112L
#define DREG_REGID_TRAP_11 0x00000113L
#define DREG_REGID_TRAP_12 0x00000114L
#define DREG_REGID_TRAP_13 0x00000115L
#define DREG_REGID_TRAP_14 0x00000116L
#define DREG_REGID_TRAP_15 0x00000117L
#define DREG_REGID_TRAP_16 0x00000118L
#define DREG_REGID_TRAP_17 0x00000119L
#define DREG_REGID_TRAP_18 0x0000011AL
#define DREG_REGID_TRAP_19 0x0000011BL
#define DREG_REGID_TRAP_20 0x0000011CL
#define DREG_REGID_TRAP_21 0x0000011DL
#define DREG_REGID_TRAP_22 0x0000011EL
#define DREG_REGID_TRAP_23 0x0000011FL
#endif
#endif
#define DREG_REGID_RSA0_LOW 0x00000200L
#define DREG_REGID_RSA0_HIGH 0x00000201L
#define DREG_REGID_RSA1_LOW 0x00000202L
#define DREG_REGID_RSA1_HIGH 0x00000203L
#define DREG_REGID_RSA2 0x00000204L
#define DREG_REGID_RSA3 0x00000205L
#define DREG_REGID_RSI0_LOW 0x00000206L
#define DREG_REGID_RSI0_HIGH 0x00000207L
#define DREG_REGID_RSI1 0x00000208L
#define DREG_REGID_RSI2 0x00000209L
#define DREG_REGID_SAGUSTATUS 0x0000020AL
#define DREG_REGID_RSCONFIG01_LOW 0x0000020BL
#define DREG_REGID_RSCONFIG01_HIGH 0x0000020CL
#define DREG_REGID_RSCONFIG23_LOW 0x0000020DL
#define DREG_REGID_RSCONFIG23_HIGH 0x0000020EL
#define DREG_REGID_RSDMA01E 0x0000020FL
#define DREG_REGID_RSDMA23E 0x00000210L
#define DREG_REGID_RSD0_LOW 0x00000211L
#define DREG_REGID_RSD0_HIGH 0x00000212L
#define DREG_REGID_RSD1_LOW 0x00000213L
#define DREG_REGID_RSD1_HIGH 0x00000214L
#define DREG_REGID_RSD2_LOW 0x00000215L
#define DREG_REGID_RSD2_HIGH 0x00000216L
#define DREG_REGID_RSD3_LOW 0x00000217L
#define DREG_REGID_RSD3_HIGH 0x00000218L
#define DREG_REGID_SRAR_HIGH 0x0000021AL
#define DREG_REGID_SRAR_LOW 0x0000021BL
#define DREG_REGID_DMA_STATE 0x0000021CL
#define DREG_REGID_CURRENT_DMA_STREAM 0x0000021DL
#define DREG_REGID_NEXT_DMA_STREAM 0x0000021EL
#define DREG_REGID_CPU_STATUS 0x00000300L
#define DREG_REGID_MAC_MODE 0x00000301L
#define DREG_REGID_STACK_AND_REPEAT 0x00000302L
#define DREG_REGID_INDEX0 0x00000304L
#define DREG_REGID_INDEX1 0x00000305L
#define DREG_REGID_DMA_STATE_0_3 0x00000400L
#define DREG_REGID_DMA_STATE_4_7 0x00000404L
#define DREG_REGID_DMA_STATE_8_11 0x00000408L
#define DREG_REGID_DMA_STATE_12_15 0x0000040CL
#define DREG_REGID_DMA_STATE_16_19 0x00000410L
#define DREG_REGID_DMA_STATE_20_23 0x00000414L
#define DREG_REGID_DMA_STATE_24_27 0x00000418L
#define DREG_REGID_DMA_STATE_28_31 0x0000041CL
#define DREG_REGID_DMA_STATE_32_35 0x00000420L
#define DREG_REGID_DMA_STATE_36_39 0x00000424L
#define DREG_REGID_DMA_STATE_40_43 0x00000428L
#define DREG_REGID_DMA_STATE_44_47 0x0000042CL
#define DREG_REGID_DMA_STATE_48_51 0x00000430L
#define DREG_REGID_DMA_STATE_52_55 0x00000434L
#define DREG_REGID_DMA_STATE_56_59 0x00000438L
#define DREG_REGID_DMA_STATE_60_63 0x0000043CL
#define DREG_REGID_DMA_STATE_64_67 0x00000440L
#define DREG_REGID_DMA_STATE_68_71 0x00000444L
#define DREG_REGID_DMA_STATE_72_75 0x00000448L
#define DREG_REGID_DMA_STATE_76_79 0x0000044CL
#define DREG_REGID_DMA_STATE_80_83 0x00000450L
#define DREG_REGID_DMA_STATE_84_87 0x00000454L
#define DREG_REGID_DMA_STATE_88_91 0x00000458L
#define DREG_REGID_DMA_STATE_92_95 0x0000045CL
#define DREG_REGID_TRAP_SELECT 0x00000500L
#define DREG_REGID_TRAP_WRITE_0 0x00000500L
#define DREG_REGID_TRAP_WRITE_1 0x00000501L
#define DREG_REGID_TRAP_WRITE_2 0x00000502L
#define DREG_REGID_TRAP_WRITE_3 0x00000503L
#define DREG_REGID_TRAP_WRITE_4 0x00000504L
#define DREG_REGID_TRAP_WRITE_5 0x00000505L
#define DREG_REGID_TRAP_WRITE_6 0x00000506L
#define DREG_REGID_TRAP_WRITE_7 0x00000507L
#if !defined(NO_CS4612)
#if !defined(NO_CS4615)
#define DREG_REGID_TRAP_WRITE_8 0x00000510L
#define DREG_REGID_TRAP_WRITE_9 0x00000511L
#define DREG_REGID_TRAP_WRITE_10 0x00000512L
#define DREG_REGID_TRAP_WRITE_11 0x00000513L
#define DREG_REGID_TRAP_WRITE_12 0x00000514L
#define DREG_REGID_TRAP_WRITE_13 0x00000515L
#define DREG_REGID_TRAP_WRITE_14 0x00000516L
#define DREG_REGID_TRAP_WRITE_15 0x00000517L
#define DREG_REGID_TRAP_WRITE_16 0x00000518L
#define DREG_REGID_TRAP_WRITE_17 0x00000519L
#define DREG_REGID_TRAP_WRITE_18 0x0000051AL
#define DREG_REGID_TRAP_WRITE_19 0x0000051BL
#define DREG_REGID_TRAP_WRITE_20 0x0000051CL
#define DREG_REGID_TRAP_WRITE_21 0x0000051DL
#define DREG_REGID_TRAP_WRITE_22 0x0000051EL
#define DREG_REGID_TRAP_WRITE_23 0x0000051FL
#endif
#endif
#define DREG_REGID_MAC0_ACC0_LOW 0x00000600L
#define DREG_REGID_MAC0_ACC1_LOW 0x00000601L
#define DREG_REGID_MAC0_ACC2_LOW 0x00000602L
#define DREG_REGID_MAC0_ACC3_LOW 0x00000603L
#define DREG_REGID_MAC1_ACC0_LOW 0x00000604L
#define DREG_REGID_MAC1_ACC1_LOW 0x00000605L
#define DREG_REGID_MAC1_ACC2_LOW 0x00000606L
#define DREG_REGID_MAC1_ACC3_LOW 0x00000607L
#define DREG_REGID_MAC0_ACC0_MID 0x00000608L
#define DREG_REGID_MAC0_ACC1_MID 0x00000609L
#define DREG_REGID_MAC0_ACC2_MID 0x0000060AL
#define DREG_REGID_MAC0_ACC3_MID 0x0000060BL
#define DREG_REGID_MAC1_ACC0_MID 0x0000060CL
#define DREG_REGID_MAC1_ACC1_MID 0x0000060DL
#define DREG_REGID_MAC1_ACC2_MID 0x0000060EL
#define DREG_REGID_MAC1_ACC3_MID 0x0000060FL
#define DREG_REGID_MAC0_ACC0_HIGH 0x00000610L
#define DREG_REGID_MAC0_ACC1_HIGH 0x00000611L
#define DREG_REGID_MAC0_ACC2_HIGH 0x00000612L
#define DREG_REGID_MAC0_ACC3_HIGH 0x00000613L
#define DREG_REGID_MAC1_ACC0_HIGH 0x00000614L
#define DREG_REGID_MAC1_ACC1_HIGH 0x00000615L
#define DREG_REGID_MAC1_ACC2_HIGH 0x00000616L
#define DREG_REGID_MAC1_ACC3_HIGH 0x00000617L
#define DREG_REGID_RSHOUT_LOW 0x00000620L
#define DREG_REGID_RSHOUT_MID 0x00000628L
#define DREG_REGID_RSHOUT_HIGH 0x00000630L
/*****************************************************************************
*
* The following defines are for the flags in the DMA stream requestor write
* port register.
*
*****************************************************************************/
#define DSRWP_DSR_MASK 0x0000000FL
#define DSRWP_DSR_BG_RQ 0x00000001L
#define DSRWP_DSR_PRIORITY_MASK 0x00000006L
#define DSRWP_DSR_PRIORITY_0 0x00000000L
#define DSRWP_DSR_PRIORITY_1 0x00000002L
#define DSRWP_DSR_PRIORITY_2 0x00000004L
#define DSRWP_DSR_PRIORITY_3 0x00000006L
#define DSRWP_DSR_RQ_PENDING 0x00000008L
/*****************************************************************************
*
* The following defines are for the flags in the trap write port register.
*
*****************************************************************************/
#define TWPR_TW_MASK 0x0000FFFFL
#define TWPR_TW_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the stack pointer write
* register.
*
*****************************************************************************/
#define SPWR_STKP_MASK 0x0000000FL
#define SPWR_STKP_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the SP interrupt register.
*
*****************************************************************************/
#define SPIR_FRI 0x00000001L
#define SPIR_DOI 0x00000002L
#define SPIR_GPI2 0x00000004L
#define SPIR_GPI3 0x00000008L
#define SPIR_IP0 0x00000010L
#define SPIR_IP1 0x00000020L
#define SPIR_IP2 0x00000040L
#define SPIR_IP3 0x00000080L
/*****************************************************************************
*
* The following defines are for the flags in the functional group 1 register.
*
*****************************************************************************/
#define FGR1_F1S_MASK 0x0000FFFFL
#define FGR1_F1S_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the SP clock status register.
*
*****************************************************************************/
#define SPCS_FRI 0x00000001L
#define SPCS_DOI 0x00000002L
#define SPCS_GPI2 0x00000004L
#define SPCS_GPI3 0x00000008L
#define SPCS_IP0 0x00000010L
#define SPCS_IP1 0x00000020L
#define SPCS_IP2 0x00000040L
#define SPCS_IP3 0x00000080L
#define SPCS_SPRUN 0x00000100L
#define SPCS_SLEEP 0x00000200L
#define SPCS_FG 0x00000400L
#define SPCS_ORUN 0x00000800L
#define SPCS_IRQ 0x00001000L
#define SPCS_FGN_MASK 0x0000E000L
#define SPCS_FGN_SHIFT 13L
/*****************************************************************************
*
* The following defines are for the flags in the SP DMA requestor status
* register.
*
*****************************************************************************/
#define SDSR_DCS_MASK 0x000000FFL
#define SDSR_DCS_SHIFT 0L
#define SDSR_DCS_NONE 0x00000007L
/*****************************************************************************
*
* The following defines are for the flags in the frame timer register.
*
*****************************************************************************/
#define FRMT_FTV_MASK 0x0000FFFFL
#define FRMT_FTV_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the frame timer current count
* register.
*
*****************************************************************************/
#define FRCC_FCC_MASK 0x0000FFFFL
#define FRCC_FCC_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the frame timer save count
* register.
*
*****************************************************************************/
#define FRSC_FCS_MASK 0x0000FFFFL
#define FRSC_FCS_SHIFT 0L
/*****************************************************************************
*
* The following define the various flags stored in the scatter/gather
* descriptors.
*
*****************************************************************************/
#define DMA_SG_NEXT_ENTRY_MASK 0x00000FF8L
#define DMA_SG_SAMPLE_END_MASK 0x0FFF0000L
#define DMA_SG_SAMPLE_END_FLAG 0x10000000L
#define DMA_SG_LOOP_END_FLAG 0x20000000L
#define DMA_SG_SIGNAL_END_FLAG 0x40000000L
#define DMA_SG_SIGNAL_PAGE_FLAG 0x80000000L
#define DMA_SG_NEXT_ENTRY_SHIFT 3L
#define DMA_SG_SAMPLE_END_SHIFT 16L
/*****************************************************************************
*
* The following define the offsets of the fields within the on-chip generic
* DMA requestor.
*
*****************************************************************************/
#define DMA_RQ_CONTROL1 0x00000000L
#define DMA_RQ_CONTROL2 0x00000004L
#define DMA_RQ_SOURCE_ADDR 0x00000008L
#define DMA_RQ_DESTINATION_ADDR 0x0000000CL
#define DMA_RQ_NEXT_PAGE_ADDR 0x00000010L
#define DMA_RQ_NEXT_PAGE_SGDESC 0x00000014L
#define DMA_RQ_LOOP_START_ADDR 0x00000018L
#define DMA_RQ_POST_LOOP_ADDR 0x0000001CL
#define DMA_RQ_PAGE_MAP_ADDR 0x00000020L
/*****************************************************************************
*
* The following defines are for the flags in the first control word of the
* on-chip generic DMA requestor.
*
*****************************************************************************/
#define DMA_RQ_C1_COUNT_MASK 0x000003FFL
#define DMA_RQ_C1_DESTINATION_SCATTER 0x00001000L
#define DMA_RQ_C1_SOURCE_GATHER 0x00002000L
#define DMA_RQ_C1_DONE_FLAG 0x00004000L
#define DMA_RQ_C1_OPTIMIZE_STATE 0x00008000L
#define DMA_RQ_C1_SAMPLE_END_STATE_MASK 0x00030000L
#define DMA_RQ_C1_FULL_PAGE 0x00000000L
#define DMA_RQ_C1_BEFORE_SAMPLE_END 0x00010000L
#define DMA_RQ_C1_PAGE_MAP_ERROR 0x00020000L
#define DMA_RQ_C1_AT_SAMPLE_END 0x00030000L
#define DMA_RQ_C1_LOOP_END_STATE_MASK 0x000C0000L
#define DMA_RQ_C1_NOT_LOOP_END 0x00000000L
#define DMA_RQ_C1_BEFORE_LOOP_END 0x00040000L
#define DMA_RQ_C1_2PAGE_LOOP_BEGIN 0x00080000L
#define DMA_RQ_C1_LOOP_BEGIN 0x000C0000L
#define DMA_RQ_C1_PAGE_MAP_MASK 0x00300000L
#define DMA_RQ_C1_PM_NONE_PENDING 0x00000000L
#define DMA_RQ_C1_PM_NEXT_PENDING 0x00100000L
#define DMA_RQ_C1_PM_RESERVED 0x00200000L
#define DMA_RQ_C1_PM_LOOP_NEXT_PENDING 0x00300000L
#define DMA_RQ_C1_WRITEBACK_DEST_FLAG 0x00400000L
#define DMA_RQ_C1_WRITEBACK_SRC_FLAG 0x00800000L
#define DMA_RQ_C1_DEST_SIZE_MASK 0x07000000L
#define DMA_RQ_C1_DEST_LINEAR 0x00000000L
#define DMA_RQ_C1_DEST_MOD16 0x01000000L
#define DMA_RQ_C1_DEST_MOD32 0x02000000L
#define DMA_RQ_C1_DEST_MOD64 0x03000000L
#define DMA_RQ_C1_DEST_MOD128 0x04000000L
#define DMA_RQ_C1_DEST_MOD256 0x05000000L
#define DMA_RQ_C1_DEST_MOD512 0x06000000L
#define DMA_RQ_C1_DEST_MOD1024 0x07000000L
#define DMA_RQ_C1_DEST_ON_HOST 0x08000000L
#define DMA_RQ_C1_SOURCE_SIZE_MASK 0x70000000L
#define DMA_RQ_C1_SOURCE_LINEAR 0x00000000L
#define DMA_RQ_C1_SOURCE_MOD16 0x10000000L
#define DMA_RQ_C1_SOURCE_MOD32 0x20000000L
#define DMA_RQ_C1_SOURCE_MOD64 0x30000000L
#define DMA_RQ_C1_SOURCE_MOD128 0x40000000L
#define DMA_RQ_C1_SOURCE_MOD256 0x50000000L
#define DMA_RQ_C1_SOURCE_MOD512 0x60000000L
#define DMA_RQ_C1_SOURCE_MOD1024 0x70000000L
#define DMA_RQ_C1_SOURCE_ON_HOST 0x80000000L
#define DMA_RQ_C1_COUNT_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the second control word of the
* on-chip generic DMA requestor.
*
*****************************************************************************/
#define DMA_RQ_C2_VIRTUAL_CHANNEL_MASK 0x0000003FL
#define DMA_RQ_C2_VIRTUAL_SIGNAL_MASK 0x00000300L
#define DMA_RQ_C2_NO_VIRTUAL_SIGNAL 0x00000000L
#define DMA_RQ_C2_SIGNAL_EVERY_DMA 0x00000100L
#define DMA_RQ_C2_SIGNAL_SOURCE_PINGPONG 0x00000200L
#define DMA_RQ_C2_SIGNAL_DEST_PINGPONG 0x00000300L
#define DMA_RQ_C2_AUDIO_CONVERT_MASK 0x0000F000L
#define DMA_RQ_C2_AC_NONE 0x00000000L
#define DMA_RQ_C2_AC_8_TO_16_BIT 0x00001000L
#define DMA_RQ_C2_AC_MONO_TO_STEREO 0x00002000L
#define DMA_RQ_C2_AC_ENDIAN_CONVERT 0x00004000L
#define DMA_RQ_C2_AC_SIGNED_CONVERT 0x00008000L
#define DMA_RQ_C2_LOOP_END_MASK 0x0FFF0000L
#define DMA_RQ_C2_LOOP_MASK 0x30000000L
#define DMA_RQ_C2_NO_LOOP 0x00000000L
#define DMA_RQ_C2_ONE_PAGE_LOOP 0x10000000L
#define DMA_RQ_C2_TWO_PAGE_LOOP 0x20000000L
#define DMA_RQ_C2_MULTI_PAGE_LOOP 0x30000000L
#define DMA_RQ_C2_SIGNAL_LOOP_BACK 0x40000000L
#define DMA_RQ_C2_SIGNAL_POST_BEGIN_PAGE 0x80000000L
#define DMA_RQ_C2_VIRTUAL_CHANNEL_SHIFT 0L
#define DMA_RQ_C2_LOOP_END_SHIFT 16L
/*****************************************************************************
*
* The following defines are for the flags in the source and destination words
* of the on-chip generic DMA requestor.
*
*****************************************************************************/
#define DMA_RQ_SD_ADDRESS_MASK 0x0000FFFFL
#define DMA_RQ_SD_MEMORY_ID_MASK 0x000F0000L
#define DMA_RQ_SD_SP_PARAM_ADDR 0x00000000L
#define DMA_RQ_SD_SP_SAMPLE_ADDR 0x00010000L
#define DMA_RQ_SD_SP_PROGRAM_ADDR 0x00020000L
#define DMA_RQ_SD_SP_DEBUG_ADDR 0x00030000L
#define DMA_RQ_SD_OMNIMEM_ADDR 0x000E0000L
#define DMA_RQ_SD_END_FLAG 0x40000000L
#define DMA_RQ_SD_ERROR_FLAG 0x80000000L
#define DMA_RQ_SD_ADDRESS_SHIFT 0L
/*****************************************************************************
*
* The following defines are for the flags in the page map address word of the
* on-chip generic DMA requestor.
*
*****************************************************************************/
#define DMA_RQ_PMA_LOOP_THIRD_PAGE_ENTRY_MASK 0x00000FF8L
#define DMA_RQ_PMA_PAGE_TABLE_MASK 0xFFFFF000L
#define DMA_RQ_PMA_LOOP_THIRD_PAGE_ENTRY_SHIFT 3L
#define DMA_RQ_PMA_PAGE_TABLE_SHIFT 12L
/*****************************************************************************
*
* The following defines are for the flags in the rsConfig01/23 registers of
* the SP.
*
*****************************************************************************/
#define RSCONFIG_MODULO_SIZE_MASK 0x0000000FL
#define RSCONFIG_MODULO_16 0x00000001L
#define RSCONFIG_MODULO_32 0x00000002L
#define RSCONFIG_MODULO_64 0x00000003L
#define RSCONFIG_MODULO_128 0x00000004L
#define RSCONFIG_MODULO_256 0x00000005L
#define RSCONFIG_MODULO_512 0x00000006L
#define RSCONFIG_MODULO_1024 0x00000007L
#define RSCONFIG_MODULO_4 0x00000008L
#define RSCONFIG_MODULO_8 0x00000009L
#define RSCONFIG_SAMPLE_SIZE_MASK 0x000000C0L
#define RSCONFIG_SAMPLE_8MONO 0x00000000L
#define RSCONFIG_SAMPLE_8STEREO 0x00000040L
#define RSCONFIG_SAMPLE_16MONO 0x00000080L
#define RSCONFIG_SAMPLE_16STEREO 0x000000C0L
#define RSCONFIG_UNDERRUN_ZERO 0x00004000L
#define RSCONFIG_DMA_TO_HOST 0x00008000L
#define RSCONFIG_STREAM_NUM_MASK 0x00FF0000L
#define RSCONFIG_MAX_DMA_SIZE_MASK 0x1F000000L
#define RSCONFIG_DMA_ENABLE 0x20000000L
#define RSCONFIG_PRIORITY_MASK 0xC0000000L
#define RSCONFIG_PRIORITY_HIGH 0x00000000L
#define RSCONFIG_PRIORITY_MEDIUM_HIGH 0x40000000L
#define RSCONFIG_PRIORITY_MEDIUM_LOW 0x80000000L
#define RSCONFIG_PRIORITY_LOW 0xC0000000L
#define RSCONFIG_STREAM_NUM_SHIFT 16L
#define RSCONFIG_MAX_DMA_SIZE_SHIFT 24L
#define BA1_VARIDEC_BUF_1 0x000
#define BA1_PDTC 0x0c0 /* BA1_PLAY_DMA_TRANSACTION_COUNT_REG */
#define BA1_PFIE 0x0c4 /* BA1_PLAY_FORMAT_&_INTERRUPT_ENABLE_REG */
#define BA1_PBA 0x0c8 /* BA1_PLAY_BUFFER_ADDRESS */
#define BA1_PVOL 0x0f8 /* BA1_PLAY_VOLUME_REG */
#define BA1_PSRC 0x288 /* BA1_PLAY_SAMPLE_RATE_CORRECTION_REG */
#define BA1_PCTL 0x2a4 /* BA1_PLAY_CONTROL_REG */
#define BA1_PPI 0x2b4 /* BA1_PLAY_PHASE_INCREMENT_REG */
#define BA1_CCTL 0x064 /* BA1_CAPTURE_CONTROL_REG */
#define BA1_CIE 0x104 /* BA1_CAPTURE_INTERRUPT_ENABLE_REG */
#define BA1_CBA 0x10c /* BA1_CAPTURE_BUFFER_ADDRESS */
#define BA1_CSRC 0x2c8 /* BA1_CAPTURE_SAMPLE_RATE_CORRECTION_REG */
#define BA1_CCI 0x2d8 /* BA1_CAPTURE_COEFFICIENT_INCREMENT_REG */
#define BA1_CD 0x2e0 /* BA1_CAPTURE_DELAY_REG */
#define BA1_CPI 0x2f4 /* BA1_CAPTURE_PHASE_INCREMENT_REG */
#define BA1_CVOL 0x2f8 /* BA1_CAPTURE_VOLUME_REG */
#define BA1_CFG1 0x134 /* BA1_CAPTURE_FRAME_GROUP_1_REG */
#define BA1_CFG2 0x138 /* BA1_CAPTURE_FRAME_GROUP_2_REG */
#define BA1_CCST 0x13c /* BA1_CAPTURE_CONSTANT_REG */
#define BA1_CSPB 0x340 /* BA1_CAPTURE_SPB_ADDRESS */
/* The following struct holds the initialization array. */
/*
* this is 3*1024 for parameter, 3.5*1024 for sample and 2*3.5*1024 for code since
* each instruction is 40 bits and takes two dwords
*/
#define INKY_BA1_DWORD_SIZE (13 * 1024 + 512)
#define INKY_MEMORY_COUNT 3
struct BA1struct
{
struct
{
u_long ulDestByteOffset,
ulSourceByteSize;
} MemoryStat[INKY_MEMORY_COUNT];
u_long BA1Array[INKY_BA1_DWORD_SIZE];
};
#endif /* _CSA_REG_H */
Reference in New Issue View Git Blame Copy Permalink