d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
14b4156fdf
freebsd-dev/sys/dev/buslogic/bt_eisa.c
gibbs 904fa46143 Ask the card where our interrupt is instead of attempting to use the EISA 
config info.  On early revision cards (742a), the EISA register space,
other than the location used to determine the address of the card's main
command ports, is write only.
1999-03-08 21:35:03 +00:00

339 lines
8.4 KiB
C
Raw Blame History

/*
* Product specific probe and attach routines for:
* Buslogic BT74x SCSI controllers
*
* Copyright (c) 1995, 1998, 1999 Justin T. Gibbs
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: bt_eisa.c,v 1.1 1998/09/15 07:32:52 gibbs Exp $
*/
#include "eisa.h"
#if NEISA > 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <i386/eisa/eisaconf.h>
#include <dev/buslogic/btreg.h>
#define EISA_DEVICE_ID_BUSLOGIC_74X_B 0x0ab34201
#define EISA_DEVICE_ID_BUSLOGIC_74X_C 0x0ab34202
#define EISA_DEVICE_ID_SDC3222F 0x0ab34781
#define EISA_DEVICE_ID_AMI_4801 0x05a94801
#define BT_IOSIZE 0x04 /* Move to central header */
#define BT_EISA_IOSIZE 0x100
#define BT_EISA_SLOT_OFFSET 0xc00
#define EISA_IOCONF 0x08C
#define PORTADDR 0x07
#define PORT_330 0x00
#define PORT_334 0x01
#define PORT_230 0x02
#define PORT_234 0x03
#define PORT_130 0x04
#define PORT_134 0x05
#define IRQ_CHANNEL 0xe0
#define INT_11 0x40
#define INT_10 0x20
#define INT_15 0xa0
#define INT_12 0x60
#define INT_14 0x80
#define INT_9 0x00
#define EISA_IRQ_TYPE 0x08D
#define LEVEL 0x40
/* Definitions for the AMI Series 48 controler */
#define AMI_EISA_IOSIZE 0x500 /* Two separate ranges?? */
#define AMI_EISA_SLOT_OFFSET 0x800
#define AMI_EISA_IOCONF 0x000
#define AMI_DMA_CHANNEL 0x03
#define AMI_IRQ_CHANNEL 0x1c
#define AMI_INT_15 0x14
#define AMI_INT_14 0x10
#define AMI_INT_12 0x0c
#define AMI_INT_11 0x00
#define AMI_INT_10 0x08
#define AMI_INT_9 0x04
#define AMI_BIOS_ADDR 0xe0
#define AMI_EISA_IOCONF1 0x001
#define AMI_PORTADDR 0x0e
#define AMI_PORT_334 0x08
#define AMI_PORT_330 0x00
#define AMI_PORT_234 0x0c
#define AMI_PORT_230 0x04
#define AMI_PORT_134 0x0a
#define AMI_PORT_130 0x02
#define AMI_IRQ_LEVEL 0x01
#define AMI_MISC2_OPTIONS 0x49E
#define AMI_ENABLE_ISA_DMA 0x08
static int bt_eisa_probe(void);
static int bt_eisa_attach(struct eisa_device *e_dev);
static struct eisa_driver bt_eisa_driver = {
"bt",
bt_eisa_probe,
bt_eisa_attach,
/*shutdown*/NULL,
&bt_unit
};
DATA_SET (eisadriver_set, bt_eisa_driver);
static const char *bt_match(eisa_id_t type);
static const char*
bt_match(eisa_id_t type)
{
switch(type) {
case EISA_DEVICE_ID_BUSLOGIC_74X_B:
return ("Buslogic 74xB SCSI host adapter");
break;
case EISA_DEVICE_ID_BUSLOGIC_74X_C:
return ("Buslogic 74xC SCSI host adapter");
break;
case EISA_DEVICE_ID_SDC3222F:
return ("Storage Dimensions SDC3222F SCSI host adapter");
break;
case EISA_DEVICE_ID_AMI_4801:
return ("AMI Series 48 SCSI host adapter");
break;
default:
break;
}
return (NULL);
}
static int
bt_eisa_probe(void)
{
u_long iobase;
struct eisa_device *e_dev = NULL;
int count;
count = 0;
while ((e_dev = eisa_match_dev(e_dev, bt_match))) {
struct bt_softc *bt;
struct bt_probe_info info;
u_long port;
u_long iosize;
u_int ioconf;
iobase = (e_dev->ioconf.slot * EISA_SLOT_SIZE);
if (e_dev->id == EISA_DEVICE_ID_AMI_4801) {
u_int ioconf1;
iobase += AMI_EISA_SLOT_OFFSET;
iosize = AMI_EISA_IOSIZE;
ioconf1 = inb(iobase + AMI_EISA_IOCONF1);
/* Determine "ISA" I/O port */
switch (ioconf1 & AMI_PORTADDR) {
case AMI_PORT_330:
port = 0x330;
break;
case AMI_PORT_334:
port = 0x334;
break;
case AMI_PORT_230:
port = 0x230;
break;
case AMI_PORT_234:
port = 0x234;
break;
case AMI_PORT_134:
port = 0x134;
break;
case AMI_PORT_130:
port = 0x130;
break;
default:
/* Disabled */
printf("bt: AMI EISA Adapter at "
"slot %d has a disabled I/O "
"port. Cannot attach.\n",
e_dev->ioconf.slot);
continue;
}
} else {
iobase += BT_EISA_SLOT_OFFSET;
iosize = BT_EISA_IOSIZE;
ioconf = inb(iobase + EISA_IOCONF);
/* Determine "ISA" I/O port */
switch (ioconf & PORTADDR) {
case PORT_330:
port = 0x330;
break;
case PORT_334:
port = 0x334;
break;
case PORT_230:
port = 0x230;
break;
case PORT_234:
port = 0x234;
break;
case PORT_130:
port = 0x130;
break;
case PORT_134:
port = 0x134;
break;
default:
/* Disabled */
printf("bt: Buslogic EISA Adapter at "
"slot %d has a disabled I/O "
"port. Cannot attach.\n",
e_dev->ioconf.slot);
continue;
}
}
bt_mark_probed_iop(port);
/* Allocate a softc for use during probing */
bt = bt_alloc(BT_TEMP_UNIT, I386_BUS_SPACE_IO, port);
if (bt == NULL) {
printf("bt_eisa_probe: Could not allocate softc for "
"card at slot 0x%x\n", e_dev->ioconf.slot);
continue;
}
if (bt_port_probe(bt, &info) != 0) {
printf("bt_eisa_probe: Probe failled for "
"card at slot 0x%x\n", e_dev->ioconf.slot);
} else {
eisa_add_iospace(e_dev, iobase, iosize, RESVADDR_NONE);
eisa_add_iospace(e_dev, port, BT_IOSIZE, RESVADDR_NONE);
eisa_add_intr(e_dev, info.irq);
eisa_registerdev(e_dev, &bt_eisa_driver);
count++;
}
bt_free(bt);
}
return count;
}
static int
bt_eisa_attach(struct eisa_device *e_dev)
{
struct bt_softc *bt;
int unit = e_dev->unit;
int irq;
resvaddr_t *ioport;
resvaddr_t *eisa_ioport;
if (TAILQ_FIRST(&e_dev->ioconf.irqs) == NULL)
return (-1);
irq = TAILQ_FIRST(&e_dev->ioconf.irqs)->irq_no;
/*
* The addresses are sorted in increasing order
* so we know the port to pass to the core bt
* driver comes first.
*/
ioport = e_dev->ioconf.ioaddrs.lh_first;
if (ioport == NULL)
return -1;
eisa_ioport = ioport->links.le_next;
if (eisa_ioport == NULL)
return -1;
eisa_reg_start(e_dev);
if (eisa_reg_iospace(e_dev, ioport))
return -1;
if (eisa_reg_iospace(e_dev, eisa_ioport))
return -1;
if ((bt = bt_alloc(unit, I386_BUS_SPACE_IO, ioport->addr)) == NULL)
return -1;
/* Allocate a dmatag for our SCB DMA maps */
/* XXX Should be a child of the PCI bus dma tag */
if (bus_dma_tag_create(/*parent*/NULL, /*alignment*/0, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
/*maxsize*/BUS_SPACE_MAXSIZE_32BIT,
/*nsegments*/BUS_SPACE_UNRESTRICTED,
/*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
/*flags*/0, &bt->parent_dmat) != 0) {
bt_free(bt);
return -1;
}
if (eisa_reg_intr(e_dev, irq, bt_intr, (void *)bt, &cam_imask,
/*shared ==*/bt->level_trigger_ints ? 1 : 0)) {
bt_free(bt);
return -1;
}
eisa_reg_end(e_dev);
/*
* Now that we know we own the resources we need, do the full
* card initialization.
*/
if (bt_probe(bt) || bt_fetch_adapter_info(bt) || bt_init(bt)) {
bt_free(bt);
/*
* The board's IRQ line will not be left enabled
* if we can't intialize correctly, so its safe
* to release the irq.
*/
eisa_release_intr(e_dev, irq, bt_intr);
return -1;
}
/* Attach sub-devices - always succeeds */
bt_attach(bt);
if (eisa_enable_intr(e_dev, irq)) {
bt_free(bt);
eisa_release_intr(e_dev, irq, bt_intr);
return -1;
}
return 0;
}
#endif /* NEISA > 0 */
Reference in New Issue View Git Blame Copy Permalink