freebsd-dev/sys/dev/drm/i915_irq.c
Robert Noland 51e39089c9 Initialize the vblank structures at load time. Previously we did this
at irq install/uninstall time, but when we vt switch, we uninstall the
irq handler.  When the irq handler is reinstalled, the modeset ioctl
happens first.  The modeset ioctl is supposed to tell us that we can
disable vblank interrupts if there are no active consumers.  This will
fail after a vt switch until another modeset ioctl is called via dpms
or xrandr.  Leading to cases where either interrupts are on and can't
be disabled, or worse, no interrupts at all.

MFC after:	2 weeks
2009-02-28 02:37:55 +00:00

538 lines
14 KiB
C

/* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
*/
/*-
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "dev/drm/drmP.h"
#include "dev/drm/drm.h"
#include "dev/drm/i915_drm.h"
#include "dev/drm/i915_drv.h"
#define MAX_NOPID ((u32)~0)
/**
* Interrupts that are always left unmasked.
*
* Since pipe events are edge-triggered from the PIPESTAT register to IIR,
* we leave them always unmasked in IMR and then control enabling them through
* PIPESTAT alone.
*/
#define I915_INTERRUPT_ENABLE_FIX (I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
/** Interrupts that we mask and unmask at runtime. */
#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
/** These are all of the interrupts used by the driver */
#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
I915_INTERRUPT_ENABLE_VAR)
static inline void
i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
{
DRM_DEBUG("irq_enable_reg = 0x%08x, mask = 0x%08x\n",
dev_priv->irq_mask_reg, mask);
mask &= I915_INTERRUPT_ENABLE_VAR;
if ((dev_priv->irq_mask_reg & mask) != 0) {
dev_priv->irq_mask_reg &= ~mask;
I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IMR);
}
}
static inline void
i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
{
mask &= I915_INTERRUPT_ENABLE_VAR;
if ((dev_priv->irq_mask_reg & mask) != mask) {
dev_priv->irq_mask_reg |= mask;
I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IMR);
}
}
static inline u32
i915_pipestat(int pipe)
{
if (pipe == 0)
return PIPEASTAT;
if (pipe == 1)
return PIPEBSTAT;
return -EINVAL;
}
void
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
{
if ((dev_priv->pipestat[pipe] & mask) != mask) {
u32 reg = i915_pipestat(pipe);
dev_priv->pipestat[pipe] |= mask;
/* Enable the interrupt, clear any pending status */
I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
(void) I915_READ(reg);
}
}
void
i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
{
if ((dev_priv->pipestat[pipe] & mask) != 0) {
u32 reg = i915_pipestat(pipe);
dev_priv->pipestat[pipe] &= ~mask;
I915_WRITE(reg, dev_priv->pipestat[pipe]);
(void) I915_READ(reg);
}
}
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
* @pipe: pipe to check
*
* Reading certain registers when the pipe is disabled can hang the chip.
* Use this routine to make sure the PLL is running and the pipe is active
* before reading such registers if unsure.
*/
static int
i915_pipe_enabled(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long pipeconf = pipe ? PIPEBCONF : PIPEACONF;
if (I915_READ(pipeconf) & PIPEACONF_ENABLE)
return 1;
return 0;
}
/* Called from drm generic code, passed a 'crtc', which
* we use as a pipe index
*/
u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long high_frame;
unsigned long low_frame;
u32 high1, high2, low, count;
high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH;
low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL;
if (!i915_pipe_enabled(dev, pipe)) {
DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
return 0;
}
/*
* High & low register fields aren't synchronized, so make sure
* we get a low value that's stable across two reads of the high
* register.
*/
do {
high1 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
PIPE_FRAME_HIGH_SHIFT);
low = ((I915_READ(low_frame) & PIPE_FRAME_LOW_MASK) >>
PIPE_FRAME_LOW_SHIFT);
high2 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
PIPE_FRAME_HIGH_SHIFT);
} while (high1 != high2);
count = (high1 << 8) | low;
return count;
}
u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int reg = pipe ? PIPEB_FRMCOUNT_GM45 : PIPEA_FRMCOUNT_GM45;
if (!i915_pipe_enabled(dev, pipe)) {
DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
return 0;
}
return I915_READ(reg);
}
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 iir, new_iir;
u32 pipea_stats, pipeb_stats;
atomic_inc(&dev_priv->irq_received);
for (iir = I915_READ(IIR) ; iir != 0 ; iir = new_iir) {
pipea_stats = pipeb_stats = 0;
/*
* Clear the PIPE(A|B)STAT regs before the IIR
*/
if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
DRM_SPINLOCK(&dev_priv->user_irq_lock);
pipea_stats = I915_READ(PIPEASTAT);
I915_WRITE(PIPEASTAT, pipea_stats);
DRM_SPINUNLOCK(&dev_priv->user_irq_lock);
}
if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
DRM_SPINLOCK(&dev_priv->user_irq_lock);
pipeb_stats = I915_READ(PIPEBSTAT);
I915_WRITE(PIPEBSTAT, pipeb_stats);
DRM_SPINUNLOCK(&dev_priv->user_irq_lock);
}
I915_WRITE(IIR, iir);
new_iir = I915_READ(IIR);
DRM_DEBUG("iir = 0x%08x, pipestats a = 0x%08x, b = 0x%08x\n",
iir, pipea_stats, pipeb_stats);
if (dev_priv->sarea_priv)
dev_priv->sarea_priv->last_dispatch =
READ_BREADCRUMB(dev_priv);
if (iir & I915_USER_INTERRUPT) {
#ifdef I915_HAVE_GEM
dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
#endif
DRM_WAKEUP(&dev_priv->irq_queue);
}
if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS |
PIPE_VBLANK_INTERRUPT_STATUS))
drm_handle_vblank(dev, 0);
if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS |
PIPE_VBLANK_INTERRUPT_STATUS))
drm_handle_vblank(dev, 1);
#ifdef __linux__
if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
(iir & I915_ASLE_INTERRUPT))
opregion_asle_intr(dev);
#endif
}
}
static int i915_emit_irq(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
RING_LOCALS;
i915_kernel_lost_context(dev);
DRM_DEBUG("\n");
dev_priv->counter++;
if (dev_priv->counter > 0x7FFFFFFFUL)
dev_priv->counter = 1;
if (dev_priv->sarea_priv)
dev_priv->sarea_priv->last_enqueue = dev_priv->counter;
BEGIN_LP_RING(4);
OUT_RING(MI_STORE_DWORD_INDEX);
OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->counter);
OUT_RING(MI_USER_INTERRUPT);
ADVANCE_LP_RING();
return dev_priv->counter;
}
void i915_user_irq_get(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
DRM_DEBUG("\n");
DRM_SPINLOCK_IRQSAVE(&dev_priv->user_irq_lock, irqflags);
if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1))
i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
DRM_SPINUNLOCK_IRQRESTORE(&dev_priv->user_irq_lock, irqflags);
}
void i915_user_irq_put(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
DRM_SPINLOCK_IRQSAVE(&dev_priv->user_irq_lock, irqflags);
#ifdef __linux__
BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0);
#endif
if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0))
i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
DRM_SPINUNLOCK_IRQRESTORE(&dev_priv->user_irq_lock, irqflags);
}
static int i915_wait_irq(struct drm_device * dev, int irq_nr)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int ret = 0;
DRM_DEBUG("irq_nr=%d breadcrumb=%d\n", irq_nr,
READ_BREADCRUMB(dev_priv));
if (READ_BREADCRUMB(dev_priv) >= irq_nr) {
if (dev_priv->sarea_priv) {
dev_priv->sarea_priv->last_dispatch =
READ_BREADCRUMB(dev_priv);
}
return 0;
}
if (dev_priv->sarea_priv)
dev_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
i915_user_irq_get(dev);
DRM_WAIT_ON(ret, dev_priv->irq_queue, 3 * DRM_HZ,
READ_BREADCRUMB(dev_priv) >= irq_nr);
i915_user_irq_put(dev);
if (ret == -EBUSY) {
DRM_ERROR("EBUSY -- rec: %d emitted: %d\n",
READ_BREADCRUMB(dev_priv), (int)dev_priv->counter);
}
if (dev_priv->sarea_priv)
dev_priv->sarea_priv->last_dispatch =
READ_BREADCRUMB(dev_priv);
return ret;
}
/* Needs the lock as it touches the ring.
*/
int i915_irq_emit(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_irq_emit_t *emit = data;
int result;
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
result = i915_emit_irq(dev);
if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) {
DRM_ERROR("copy_to_user\n");
return -EFAULT;
}
return 0;
}
/* Doesn't need the hardware lock.
*/
int i915_irq_wait(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_irq_wait_t *irqwait = data;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
return i915_wait_irq(dev, irqwait->irq_seq);
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
u32 pipestat;
/*
* Older chips didn't have the start vblank interrupt,
* but
*/
if (IS_I965G (dev))
pipestat = PIPE_START_VBLANK_INTERRUPT_ENABLE;
else
pipestat = PIPE_VBLANK_INTERRUPT_ENABLE;
DRM_SPINLOCK_IRQSAVE(&dev_priv->user_irq_lock, irqflags);
i915_enable_pipestat(dev_priv, pipe, pipestat);
DRM_SPINUNLOCK_IRQRESTORE(&dev_priv->user_irq_lock, irqflags);
return 0;
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
DRM_SPINLOCK_IRQSAVE(&dev_priv->user_irq_lock, irqflags);
i915_disable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_ENABLE | PIPE_VBLANK_INTERRUPT_ENABLE);
DRM_SPINUNLOCK_IRQRESTORE(&dev_priv->user_irq_lock, irqflags);
}
/* Set the vblank monitor pipe
*/
int i915_vblank_pipe_set(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
return 0;
}
int i915_vblank_pipe_get(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_vblank_pipe_t *pipe = data;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
return 0;
}
/**
* Schedule buffer swap at given vertical blank.
*/
int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
/* The delayed swap mechanism was fundamentally racy, and has been
* removed. The model was that the client requested a delayed flip/swap
* from the kernel, then waited for vblank before continuing to perform
* rendering. The problem was that the kernel might wake the client
* up before it dispatched the vblank swap (since the lock has to be
* held while touching the ringbuffer), in which case the client would
* clear and start the next frame before the swap occurred, and
* flicker would occur in addition to likely missing the vblank.
*
* In the absence of this ioctl, userland falls back to a correct path
* of waiting for a vblank, then dispatching the swap on its own.
* Context switching to userland and back is plenty fast enough for
* meeting the requirements of vblank swapping.
*/
return -EINVAL;
}
/* drm_dma.h hooks
*/
void i915_driver_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE(HWSTAM, 0xeffe);
I915_WRITE(PIPEASTAT, 0);
I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
(void) I915_READ(IER);
}
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
dev_priv->pipestat[0] = 0;
dev_priv->pipestat[1] = 0;
/* Disable pipe interrupt enables, clear pending pipe status */
I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
/* Clear pending interrupt status */
I915_WRITE(IIR, I915_READ(IIR));
I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK);
I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IER);
#ifdef __linux__
opregion_enable_asle(dev);
#endif
DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
i915_enable_vblank(dev, 0);
i915_enable_vblank(dev, 1);
return 0;
}
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
if (!dev_priv)
return;
dev_priv->vblank_pipe = 0;
I915_WRITE(HWSTAM, 0xffffffff);
I915_WRITE(PIPEASTAT, 0);
I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
I915_WRITE(IIR, I915_READ(IIR));
}