freebsd-dev/sys/net/if_atmsubr.c
Eivind Eklund e0d781f3a5 Make POWERFAIL_NMI, PPS_SYNC and NATM new style options.
This also fixes a couple of defunct options; submitted by bde.
1998-01-31 05:00:21 +00:00

401 lines
10 KiB
C

/* $NetBSD: if_atmsubr.c,v 1.10 1997/03/11 23:19:51 chuck Exp $ */
/*
*
* Copyright (c) 1996 Charles D. Cranor and Washington University.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Charles D. Cranor and
* Washington University.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* if_atmsubr.c
*/
#include "opt_inet.h"
#include "opt_natm.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/netisr.h>
#include <net/route.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/if_atm.h>
#include <netinet/in.h>
#include <netinet/if_atm.h>
#include <netinet/if_ether.h> /* XXX: for ETHERTYPE_* */
#ifdef INET
#include <netinet/in_var.h>
#endif
#ifdef NATM
#include <netnatm/natm.h>
#endif
#include "bpfilter.h"
#if NBPFILTER > 0
/*
* bpf support.
* the code is derived from if_loop.c.
* bpf support should belong to the driver but it's easier to implement
* it here since we can call bpf_mtap before atm_output adds a pseudo
* header to the mbuf.
* --kjc
*/
#include <net/bpf.h>
#endif /* NBPFILTER > 0 */
#define senderr(e) { error = (e); goto bad;}
/*
* atm_output: ATM output routine
* inputs:
* "ifp" = ATM interface to output to
* "m0" = the packet to output
* "dst" = the sockaddr to send to (either IP addr, or raw VPI/VCI)
* "rt0" = the route to use
* returns: error code [0 == ok]
*
* note: special semantic: if (dst == NULL) then we assume "m" already
* has an atm_pseudohdr on it and just send it directly.
* [for native mode ATM output] if dst is null, then
* rt0 must also be NULL.
*/
int
atm_output(ifp, m0, dst, rt0)
register struct ifnet *ifp;
struct mbuf *m0;
struct sockaddr *dst;
struct rtentry *rt0;
{
u_int16_t etype = 0; /* if using LLC/SNAP */
int s, error = 0, sz;
struct atm_pseudohdr atmdst, *ad;
register struct mbuf *m = m0;
register struct rtentry *rt;
struct atmllc *atmllc;
u_int32_t atm_flags;
if ((ifp->if_flags & (IFF_UP|IFF_RUNNING)) != (IFF_UP|IFF_RUNNING))
senderr(ENETDOWN);
gettime(&ifp->if_lastchange);
/*
* check route
*/
if ((rt = rt0) != NULL) {
if ((rt->rt_flags & RTF_UP) == 0) { /* route went down! */
if ((rt0 = rt = RTALLOC1(dst, 0)) != NULL)
rt->rt_refcnt--;
else
senderr(EHOSTUNREACH);
}
if (rt->rt_flags & RTF_GATEWAY) {
if (rt->rt_gwroute == 0)
goto lookup;
if (((rt = rt->rt_gwroute)->rt_flags & RTF_UP) == 0) {
rtfree(rt); rt = rt0;
lookup: rt->rt_gwroute = RTALLOC1(rt->rt_gateway, 0);
if ((rt = rt->rt_gwroute) == 0)
senderr(EHOSTUNREACH);
}
}
/* XXX: put RTF_REJECT code here if doing ATMARP */
}
/*
* check for non-native ATM traffic (dst != NULL)
*/
if (dst) {
switch (dst->sa_family) {
#ifdef INET
case AF_INET:
if (!atmresolve(rt, m, dst, &atmdst)) {
m = NULL;
/* XXX: atmresolve already free'd it */
senderr(EHOSTUNREACH);
/* XXX: put ATMARP stuff here */
/* XXX: watch who frees m on failure */
}
etype = htons(ETHERTYPE_IP);
break;
#endif
default:
#if defined(__NetBSD__) || defined(__OpenBSD__)
printf("%s: can't handle af%d\n", ifp->if_xname,
dst->sa_family);
#elif defined(__FreeBSD__) || defined(__bsdi__)
printf("%s%d: can't handle af%d\n", ifp->if_name,
ifp->if_unit, dst->sa_family);
#endif
senderr(EAFNOSUPPORT);
}
#if NBPFILTER > 0
/* BPF write needs to be handled specially */
if (dst && dst->sa_family == AF_UNSPEC) {
dst->sa_family = *(mtod(m, int *));
m->m_len -= sizeof(int);
m->m_pkthdr.len -= sizeof(int);
m->m_data += sizeof(int);
}
if (ifp->if_bpf) {
/*
* We need to prepend the address family as
* a four byte field. Cons up a dummy header
* to pacify bpf. This is safe because bpf
* will only read from the mbuf (i.e., it won't
* try to free it or keep a pointer a to it).
*/
struct mbuf m1;
u_int af = dst->sa_family;
m1.m_next = m;
m1.m_len = 4;
m1.m_data = (char *)&af;
s = splimp();
#if defined(__NetBSD__) || defined(__OpenBSD__)
bpf_mtap(&ifp->if_bpf, &m0);
#elif defined(__FreeBSD__)
bpf_mtap(ifp, &m1);
#endif
splx(s);
}
#endif /* NBPFILTER > 0 */
/*
* must add atm_pseudohdr to data
*/
sz = sizeof(atmdst);
atm_flags = ATM_PH_FLAGS(&atmdst);
if (atm_flags & ATM_PH_LLCSNAP) sz += 8; /* sizeof snap == 8 */
M_PREPEND(m, sz, M_DONTWAIT);
if (m == 0)
senderr(ENOBUFS);
ad = mtod(m, struct atm_pseudohdr *);
*ad = atmdst;
if (atm_flags & ATM_PH_LLCSNAP) {
atmllc = (struct atmllc *)(ad + 1);
bcopy(ATMLLC_HDR, atmllc->llchdr,
sizeof(atmllc->llchdr));
ATM_LLC_SETTYPE(atmllc, etype);
/* note: already in network order */
}
}
/*
* Queue message on interface, and start output if interface
* not yet active.
*/
s = splimp();
if (IF_QFULL(&ifp->if_snd)) {
IF_DROP(&ifp->if_snd);
splx(s);
senderr(ENOBUFS);
}
ifp->if_obytes += m->m_pkthdr.len;
IF_ENQUEUE(&ifp->if_snd, m);
if ((ifp->if_flags & IFF_OACTIVE) == 0)
(*ifp->if_start)(ifp);
splx(s);
return (error);
bad:
if (m)
m_freem(m);
return (error);
}
/*
* Process a received ATM packet;
* the packet is in the mbuf chain m.
*/
void
atm_input(ifp, ah, m, rxhand)
struct ifnet *ifp;
register struct atm_pseudohdr *ah;
struct mbuf *m;
void *rxhand;
{
register struct ifqueue *inq;
u_int16_t etype = ETHERTYPE_IP; /* default */
int s;
if ((ifp->if_flags & IFF_UP) == 0) {
m_freem(m);
return;
}
gettime(&ifp->if_lastchange);
ifp->if_ibytes += m->m_pkthdr.len;
#if NBPFILTER > 0
if (ifp->if_bpf) {
/*
* We need to prepend the address family as
* a four byte field. Cons up a dummy header
* to pacify bpf. This is safe because bpf
* will only read from the mbuf (i.e., it won't
* try to free it or keep a pointer to it).
*/
struct mbuf m0;
u_int af = AF_INET;
m0.m_next = m;
m0.m_len = 4;
m0.m_data = (char *)&af;
#if defined(__NetBSD__) || defined(__OpenBSD__)
bpf_mtap(&ifp->if_bpf, &m0);
#elif defined(__FreeBSD__)
bpf_mtap(ifp, &m0);
#endif
}
#endif /* NBPFILTER > 0 */
if (rxhand) {
#ifdef NATM
struct natmpcb *npcb = rxhand;
s = splimp(); /* in case 2 atm cards @ diff lvls */
npcb->npcb_inq++; /* count # in queue */
splx(s);
schednetisr(NETISR_NATM);
inq = &natmintrq;
m->m_pkthdr.rcvif = rxhand; /* XXX: overload */
#else
printf("atm_input: NATM detected but not configured in kernel\n");
m_freem(m);
return;
#endif
} else {
/*
* handle LLC/SNAP header, if present
*/
if (ATM_PH_FLAGS(ah) & ATM_PH_LLCSNAP) {
struct atmllc *alc;
if (m->m_len < sizeof(*alc) && (m = m_pullup(m, sizeof(*alc))) == 0)
return; /* failed */
alc = mtod(m, struct atmllc *);
if (bcmp(alc, ATMLLC_HDR, 6)) {
#if defined(__NetBSD__) || defined(__OpenBSD__)
printf("%s: recv'd invalid LLC/SNAP frame [vp=%d,vc=%d]\n",
ifp->if_xname, ATM_PH_VPI(ah), ATM_PH_VCI(ah));
#elif defined(__FreeBSD__) || defined(__bsdi__)
printf("%s%d: recv'd invalid LLC/SNAP frame [vp=%d,vc=%d]\n",
ifp->if_name, ifp->if_unit, ATM_PH_VPI(ah), ATM_PH_VCI(ah));
#endif
m_freem(m);
return;
}
etype = ATM_LLC_TYPE(alc);
m_adj(m, sizeof(*alc));
}
switch (etype) {
#ifdef INET
case ETHERTYPE_IP:
schednetisr(NETISR_IP);
inq = &ipintrq;
break;
#endif
default:
m_freem(m);
return;
}
}
s = splimp();
if (IF_QFULL(inq)) {
IF_DROP(inq);
m_freem(m);
} else
IF_ENQUEUE(inq, m);
splx(s);
}
/*
* Perform common duties while attaching to interface list
*/
void
atm_ifattach(ifp)
register struct ifnet *ifp;
{
register struct ifaddr *ifa;
register struct sockaddr_dl *sdl;
ifp->if_type = IFT_ATM;
ifp->if_addrlen = 0;
ifp->if_hdrlen = 0;
ifp->if_mtu = ATMMTU;
ifp->if_output = atm_output;
#if defined(__NetBSD__) || defined(__OpenBSD__)
for (ifa = ifp->if_addrlist.tqh_first; ifa != 0;
ifa = ifa->ifa_list.tqe_next)
#elif defined(__FreeBSD__) && ((__FreeBSD__ > 2) || defined(_NET_IF_VAR_H_))
/*
* for FreeBSD-3.0. 3.0-SNAP-970124 still sets -D__FreeBSD__=2!
* XXX -- for now, use newly-introduced "net/if_var.h" as an identifier.
* need a better way to identify 3.0. -- kjc
*/
for (ifa = ifp->if_addrhead.tqh_first; ifa;
ifa = ifa->ifa_link.tqe_next)
#elif defined(__FreeBSD__) || defined(__bsdi__)
for (ifa = ifp->if_addrlist; ifa; ifa = ifa->ifa_next)
#endif
if ((sdl = (struct sockaddr_dl *)ifa->ifa_addr) &&
sdl->sdl_family == AF_LINK) {
sdl->sdl_type = IFT_ATM;
sdl->sdl_alen = ifp->if_addrlen;
#ifdef notyet /* if using ATMARP, store hardware address using the next line */
bcopy(ifp->hw_addr, LLADDR(sdl), ifp->if_addrlen);
#endif
break;
}
#if NBPFILTER > 0
#if defined(__NetBSD__) || defined(__OpenBSD__)
bpfattach(&ifp->if_bpf, ifp, DLT_NULL, sizeof(u_int));
#elif defined(__FreeBSD__)
bpfattach(ifp, DLT_NULL, sizeof(u_int));
#endif
#endif /* NBPFILTER > 0 */
}