c3ed30eb19
in r229614 rather than the compat one.
589 lines
14 KiB
C
589 lines
14 KiB
C
/*-
|
|
* Copyright (C) 2012 Emulex
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of the Emulex Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* Contact Information:
|
|
* freebsd-drivers@emulex.com
|
|
*
|
|
* Emulex
|
|
* 3333 Susan Street
|
|
* Costa Mesa, CA 92626
|
|
*/
|
|
|
|
/* $FreeBSD$ */
|
|
|
|
#include "oce_if.h"
|
|
|
|
static int oce_POST(POCE_SOFTC sc);
|
|
|
|
/**
|
|
* @brief Function to post status
|
|
* @param sc software handle to the device
|
|
*/
|
|
static int
|
|
oce_POST(POCE_SOFTC sc)
|
|
{
|
|
mpu_ep_semaphore_t post_status;
|
|
int tmo = 60000;
|
|
|
|
/* read semaphore CSR */
|
|
post_status.dw0 = OCE_READ_REG32(sc, csr, MPU_EP_SEMAPHORE(sc));
|
|
|
|
/* if host is ready then wait for fw ready else send POST */
|
|
if (post_status.bits.stage <= POST_STAGE_AWAITING_HOST_RDY) {
|
|
post_status.bits.stage = POST_STAGE_CHIP_RESET;
|
|
OCE_WRITE_REG32(sc, csr, MPU_EP_SEMAPHORE(sc), post_status.dw0);
|
|
}
|
|
|
|
/* wait for FW ready */
|
|
for (;;) {
|
|
if (--tmo == 0)
|
|
break;
|
|
|
|
DELAY(1000);
|
|
|
|
post_status.dw0 = OCE_READ_REG32(sc, csr, MPU_EP_SEMAPHORE(sc));
|
|
if (post_status.bits.error) {
|
|
device_printf(sc->dev,
|
|
"POST failed: %x\n", post_status.dw0);
|
|
return ENXIO;
|
|
}
|
|
if (post_status.bits.stage == POST_STAGE_ARMFW_READY)
|
|
return 0;
|
|
}
|
|
|
|
device_printf(sc->dev, "POST timed out: %x\n", post_status.dw0);
|
|
|
|
return ENXIO;
|
|
}
|
|
|
|
/**
|
|
* @brief Function for hardware initialization
|
|
* @param sc software handle to the device
|
|
*/
|
|
int
|
|
oce_hw_init(POCE_SOFTC sc)
|
|
{
|
|
int rc = 0;
|
|
|
|
rc = oce_POST(sc);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* create the bootstrap mailbox */
|
|
rc = oce_dma_alloc(sc, sizeof(struct oce_bmbx), &sc->bsmbx, 0);
|
|
if (rc) {
|
|
device_printf(sc->dev, "Mailbox alloc failed\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = oce_reset_fun(sc);
|
|
if (rc)
|
|
goto error;
|
|
|
|
|
|
rc = oce_mbox_init(sc);
|
|
if (rc)
|
|
goto error;
|
|
|
|
|
|
rc = oce_get_fw_version(sc);
|
|
if (rc)
|
|
goto error;
|
|
|
|
|
|
rc = oce_get_fw_config(sc);
|
|
if (rc)
|
|
goto error;
|
|
|
|
|
|
sc->macaddr.size_of_struct = 6;
|
|
rc = oce_read_mac_addr(sc, 0, 1, MAC_ADDRESS_TYPE_NETWORK,
|
|
&sc->macaddr);
|
|
if (rc)
|
|
goto error;
|
|
|
|
if (IS_BE(sc) && (sc->flags & OCE_FLAGS_BE3)) {
|
|
rc = oce_mbox_check_native_mode(sc);
|
|
if (rc)
|
|
goto error;
|
|
} else
|
|
sc->be3_native = 0;
|
|
|
|
return rc;
|
|
|
|
error:
|
|
oce_dma_free(sc, &sc->bsmbx);
|
|
device_printf(sc->dev, "Hardware initialisation failed\n");
|
|
return rc;
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* @brief Releases the obtained pci resources
|
|
* @param sc software handle to the device
|
|
*/
|
|
void
|
|
oce_hw_pci_free(POCE_SOFTC sc)
|
|
{
|
|
int pci_cfg_barnum = 0;
|
|
|
|
if (IS_BE(sc) && (sc->flags & OCE_FLAGS_BE2))
|
|
pci_cfg_barnum = OCE_DEV_BE2_CFG_BAR;
|
|
else
|
|
pci_cfg_barnum = OCE_DEV_CFG_BAR;
|
|
|
|
if (sc->devcfg_res != NULL) {
|
|
bus_release_resource(sc->dev,
|
|
SYS_RES_MEMORY,
|
|
PCIR_BAR(pci_cfg_barnum), sc->devcfg_res);
|
|
sc->devcfg_res = (struct resource *)NULL;
|
|
sc->devcfg_btag = (bus_space_tag_t) 0;
|
|
sc->devcfg_bhandle = (bus_space_handle_t)0;
|
|
sc->devcfg_vhandle = (void *)NULL;
|
|
}
|
|
|
|
if (sc->csr_res != NULL) {
|
|
bus_release_resource(sc->dev,
|
|
SYS_RES_MEMORY,
|
|
PCIR_BAR(OCE_PCI_CSR_BAR), sc->csr_res);
|
|
sc->csr_res = (struct resource *)NULL;
|
|
sc->csr_btag = (bus_space_tag_t)0;
|
|
sc->csr_bhandle = (bus_space_handle_t)0;
|
|
sc->csr_vhandle = (void *)NULL;
|
|
}
|
|
|
|
if (sc->db_res != NULL) {
|
|
bus_release_resource(sc->dev,
|
|
SYS_RES_MEMORY,
|
|
PCIR_BAR(OCE_PCI_DB_BAR), sc->db_res);
|
|
sc->db_res = (struct resource *)NULL;
|
|
sc->db_btag = (bus_space_tag_t)0;
|
|
sc->db_bhandle = (bus_space_handle_t)0;
|
|
sc->db_vhandle = (void *)NULL;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
|
|
/**
|
|
* @brief Function to get the PCI capabilities
|
|
* @param sc software handle to the device
|
|
*/
|
|
static
|
|
void oce_get_pci_capabilities(POCE_SOFTC sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
if (pci_find_extcap(sc->dev, PCIY_PCIX, &val) == 0) {
|
|
if (val != 0)
|
|
sc->flags |= OCE_FLAGS_PCIX;
|
|
}
|
|
|
|
if (pci_find_extcap(sc->dev, PCIY_EXPRESS, &val) == 0) {
|
|
if (val != 0) {
|
|
uint16_t link_status =
|
|
pci_read_config(sc->dev, val + 0x12, 2);
|
|
|
|
sc->flags |= OCE_FLAGS_PCIE;
|
|
sc->pcie_link_speed = link_status & 0xf;
|
|
sc->pcie_link_width = (link_status >> 4) & 0x3f;
|
|
}
|
|
}
|
|
|
|
if (pci_find_extcap(sc->dev, PCIY_MSI, &val) == 0) {
|
|
if (val != 0)
|
|
sc->flags |= OCE_FLAGS_MSI_CAPABLE;
|
|
}
|
|
|
|
if (pci_find_extcap(sc->dev, PCIY_MSIX, &val) == 0) {
|
|
if (val != 0) {
|
|
val = pci_msix_count(sc->dev);
|
|
sc->flags |= OCE_FLAGS_MSIX_CAPABLE;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Allocate PCI resources.
|
|
*
|
|
* @param sc software handle to the device
|
|
* @returns 0 if successful, or error
|
|
*/
|
|
int
|
|
oce_hw_pci_alloc(POCE_SOFTC sc)
|
|
{
|
|
int rr, pci_cfg_barnum = 0;
|
|
pci_sli_intf_t intf;
|
|
|
|
pci_enable_busmaster(sc->dev);
|
|
|
|
oce_get_pci_capabilities(sc);
|
|
|
|
sc->fn = pci_get_function(sc->dev);
|
|
|
|
/* setup the device config region */
|
|
if (IS_BE(sc) && (sc->flags & OCE_FLAGS_BE2))
|
|
pci_cfg_barnum = OCE_DEV_BE2_CFG_BAR;
|
|
else
|
|
pci_cfg_barnum = OCE_DEV_CFG_BAR;
|
|
|
|
rr = PCIR_BAR(pci_cfg_barnum);
|
|
|
|
if (IS_BE(sc))
|
|
sc->devcfg_res = bus_alloc_resource_any(sc->dev,
|
|
SYS_RES_MEMORY, &rr,
|
|
RF_ACTIVE|RF_SHAREABLE);
|
|
else
|
|
sc->devcfg_res = bus_alloc_resource(sc->dev,
|
|
SYS_RES_MEMORY, &rr,
|
|
0ul, ~0ul, 32768,
|
|
RF_ACTIVE|RF_SHAREABLE);
|
|
|
|
if (!sc->devcfg_res)
|
|
goto error;
|
|
|
|
sc->devcfg_btag = rman_get_bustag(sc->devcfg_res);
|
|
sc->devcfg_bhandle = rman_get_bushandle(sc->devcfg_res);
|
|
sc->devcfg_vhandle = rman_get_virtual(sc->devcfg_res);
|
|
|
|
/* Read the SLI_INTF register and determine whether we
|
|
* can use this port and its features
|
|
*/
|
|
intf.dw0 = pci_read_config((sc)->dev,OCE_INTF_REG_OFFSET,4);
|
|
|
|
if (intf.bits.sli_valid != OCE_INTF_VALID_SIG)
|
|
goto error;
|
|
|
|
if (intf.bits.sli_rev != OCE_INTF_SLI_REV4) {
|
|
device_printf(sc->dev, "Adapter doesnt support SLI4\n");
|
|
goto error;
|
|
}
|
|
|
|
if (intf.bits.sli_if_type == OCE_INTF_IF_TYPE_1)
|
|
sc->flags |= OCE_FLAGS_MBOX_ENDIAN_RQD;
|
|
|
|
if (intf.bits.sli_hint1 == OCE_INTF_FUNC_RESET_REQD)
|
|
sc->flags |= OCE_FLAGS_FUNCRESET_RQD;
|
|
|
|
if (intf.bits.sli_func_type == OCE_INTF_VIRT_FUNC)
|
|
sc->flags |= OCE_FLAGS_VIRTUAL_PORT;
|
|
|
|
/* Lancer has one BAR (CFG) but BE3 has three (CFG, CSR, DB) */
|
|
if (IS_BE(sc)) {
|
|
/* set up CSR region */
|
|
rr = PCIR_BAR(OCE_PCI_CSR_BAR);
|
|
sc->csr_res = bus_alloc_resource_any(sc->dev,
|
|
SYS_RES_MEMORY, &rr, RF_ACTIVE|RF_SHAREABLE);
|
|
if (!sc->csr_res)
|
|
goto error;
|
|
sc->csr_btag = rman_get_bustag(sc->csr_res);
|
|
sc->csr_bhandle = rman_get_bushandle(sc->csr_res);
|
|
sc->csr_vhandle = rman_get_virtual(sc->csr_res);
|
|
|
|
/* set up DB doorbell region */
|
|
rr = PCIR_BAR(OCE_PCI_DB_BAR);
|
|
sc->db_res = bus_alloc_resource_any(sc->dev,
|
|
SYS_RES_MEMORY, &rr, RF_ACTIVE|RF_SHAREABLE);
|
|
if (!sc->db_res)
|
|
goto error;
|
|
sc->db_btag = rman_get_bustag(sc->db_res);
|
|
sc->db_bhandle = rman_get_bushandle(sc->db_res);
|
|
sc->db_vhandle = rman_get_virtual(sc->db_res);
|
|
}
|
|
|
|
return 0;
|
|
|
|
error:
|
|
oce_hw_pci_free(sc);
|
|
return ENXIO;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Function for device shutdown
|
|
* @param sc software handle to the device
|
|
* @returns 0 on success, error otherwise
|
|
*/
|
|
void
|
|
oce_hw_shutdown(POCE_SOFTC sc)
|
|
{
|
|
|
|
oce_stats_free(sc);
|
|
/* disable hardware interrupts */
|
|
oce_hw_intr_disable(sc);
|
|
/* Free LRO resources */
|
|
oce_free_lro(sc);
|
|
/* Release queue*/
|
|
oce_queue_release_all(sc);
|
|
/*Delete Network Interface*/
|
|
oce_delete_nw_interface(sc);
|
|
/* After fw clean we dont send any cmds to fw.*/
|
|
oce_fw_clean(sc);
|
|
/* release intr resources */
|
|
oce_intr_free(sc);
|
|
/* release PCI resources */
|
|
oce_hw_pci_free(sc);
|
|
/* free mbox specific resources */
|
|
LOCK_DESTROY(&sc->bmbx_lock);
|
|
LOCK_DESTROY(&sc->dev_lock);
|
|
|
|
oce_dma_free(sc, &sc->bsmbx);
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Function for creating nw interface.
|
|
* @param sc software handle to the device
|
|
* @returns 0 on success, error otherwise
|
|
*/
|
|
int
|
|
oce_create_nw_interface(POCE_SOFTC sc)
|
|
{
|
|
int rc;
|
|
uint32_t capab_flags;
|
|
uint32_t capab_en_flags;
|
|
|
|
/* interface capabilities to give device when creating interface */
|
|
capab_flags = OCE_CAPAB_FLAGS;
|
|
|
|
/* capabilities to enable by default (others set dynamically) */
|
|
capab_en_flags = OCE_CAPAB_ENABLE;
|
|
|
|
if (IS_XE201(sc)) {
|
|
/* LANCER A0 workaround */
|
|
capab_en_flags &= ~MBX_RX_IFACE_FLAGS_PASS_L3L4_ERR;
|
|
capab_flags &= ~MBX_RX_IFACE_FLAGS_PASS_L3L4_ERR;
|
|
}
|
|
|
|
/* enable capabilities controlled via driver startup parameters */
|
|
if (sc->rss_enable)
|
|
capab_en_flags |= MBX_RX_IFACE_FLAGS_RSS;
|
|
else {
|
|
capab_en_flags &= ~MBX_RX_IFACE_FLAGS_RSS;
|
|
capab_flags &= ~MBX_RX_IFACE_FLAGS_RSS;
|
|
}
|
|
|
|
rc = oce_if_create(sc,
|
|
capab_flags,
|
|
capab_en_flags,
|
|
0, &sc->macaddr.mac_addr[0], &sc->if_id);
|
|
if (rc)
|
|
return rc;
|
|
|
|
atomic_inc_32(&sc->nifs);
|
|
|
|
sc->if_cap_flags = capab_en_flags;
|
|
|
|
/* Enable VLAN Promisc on HW */
|
|
rc = oce_config_vlan(sc, (uint8_t) sc->if_id, NULL, 0, 1, 1);
|
|
if (rc)
|
|
goto error;
|
|
|
|
/* set default flow control */
|
|
rc = oce_set_flow_control(sc, sc->flow_control);
|
|
if (rc)
|
|
goto error;
|
|
|
|
rc = oce_rxf_set_promiscuous(sc, sc->promisc);
|
|
if (rc)
|
|
goto error;
|
|
|
|
return rc;
|
|
|
|
error:
|
|
oce_delete_nw_interface(sc);
|
|
return rc;
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief Function to delete a nw interface.
|
|
* @param sc software handle to the device
|
|
*/
|
|
void
|
|
oce_delete_nw_interface(POCE_SOFTC sc)
|
|
{
|
|
/* currently only single interface is implmeneted */
|
|
if (sc->nifs > 0) {
|
|
oce_if_del(sc, sc->if_id);
|
|
atomic_dec_32(&sc->nifs);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Soft reset.
|
|
* @param sc software handle to the device
|
|
* @returns 0 on success, error otherwise
|
|
*/
|
|
int
|
|
oce_pci_soft_reset(POCE_SOFTC sc)
|
|
{
|
|
int rc;
|
|
mpu_ep_control_t ctrl;
|
|
|
|
ctrl.dw0 = OCE_READ_REG32(sc, csr, MPU_EP_CONTROL);
|
|
ctrl.bits.cpu_reset = 1;
|
|
OCE_WRITE_REG32(sc, csr, MPU_EP_CONTROL, ctrl.dw0);
|
|
DELAY(50);
|
|
rc=oce_POST(sc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* @brief Function for hardware start
|
|
* @param sc software handle to the device
|
|
* @returns 0 on success, error otherwise
|
|
*/
|
|
int
|
|
oce_hw_start(POCE_SOFTC sc)
|
|
{
|
|
struct link_status link = { 0 };
|
|
int rc = 0;
|
|
|
|
rc = oce_get_link_status(sc, &link);
|
|
if (rc)
|
|
return 1;
|
|
|
|
if (link.logical_link_status == NTWK_LOGICAL_LINK_UP) {
|
|
sc->ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
sc->link_status = NTWK_LOGICAL_LINK_UP;
|
|
if_link_state_change(sc->ifp, LINK_STATE_UP);
|
|
} else {
|
|
sc->ifp->if_drv_flags &=
|
|
~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
sc->link_status = NTWK_LOGICAL_LINK_DOWN;
|
|
if_link_state_change(sc->ifp, LINK_STATE_DOWN);
|
|
}
|
|
|
|
if (link.mac_speed > 0 && link.mac_speed < 5)
|
|
sc->link_speed = link.mac_speed;
|
|
else
|
|
sc->link_speed = 0;
|
|
|
|
sc->qos_link_speed = (uint32_t )link.qos_link_speed * 10;
|
|
|
|
rc = oce_start_mq(sc->mq);
|
|
|
|
/* we need to get MCC aync events.
|
|
So enable intrs and also arm first EQ
|
|
*/
|
|
oce_hw_intr_enable(sc);
|
|
oce_arm_eq(sc, sc->eq[0]->eq_id, 0, TRUE, FALSE);
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Function for hardware enable interupts.
|
|
* @param sc software handle to the device
|
|
*/
|
|
void
|
|
oce_hw_intr_enable(POCE_SOFTC sc)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = OCE_READ_REG32(sc, devcfg, PCICFG_INTR_CTRL);
|
|
reg |= HOSTINTR_MASK;
|
|
OCE_WRITE_REG32(sc, devcfg, PCICFG_INTR_CTRL, reg);
|
|
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Function for hardware disable interupts
|
|
* @param sc software handle to the device
|
|
*/
|
|
void
|
|
oce_hw_intr_disable(POCE_SOFTC sc)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = OCE_READ_REG32(sc, devcfg, PCICFG_INTR_CTRL);
|
|
reg &= ~HOSTINTR_MASK;
|
|
OCE_WRITE_REG32(sc, devcfg, PCICFG_INTR_CTRL, reg);
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* @brief Function for hardware update multicast filter
|
|
* @param sc software handle to the device
|
|
*/
|
|
int
|
|
oce_hw_update_multicast(POCE_SOFTC sc)
|
|
{
|
|
struct ifnet *ifp = sc->ifp;
|
|
struct ifmultiaddr *ifma;
|
|
struct mbx_set_common_iface_multicast *req = NULL;
|
|
OCE_DMA_MEM dma;
|
|
int rc = 0;
|
|
|
|
/* Allocate DMA mem*/
|
|
if (oce_dma_alloc(sc, sizeof(struct mbx_set_common_iface_multicast),
|
|
&dma, 0))
|
|
return ENOMEM;
|
|
|
|
req = OCE_DMAPTR(&dma, struct mbx_set_common_iface_multicast);
|
|
bzero(req, sizeof(struct mbx_set_common_iface_multicast));
|
|
|
|
#if __FreeBSD_version > 800000
|
|
IF_ADDR_RLOCK(ifp);
|
|
#endif
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
|
|
if (req->params.req.num_mac == OCE_MAX_MC_FILTER_SIZE) {
|
|
/*More multicast addresses than our hardware table
|
|
So Enable multicast promiscus in our hardware to
|
|
accept all multicat packets
|
|
*/
|
|
req->params.req.promiscuous = 1;
|
|
break;
|
|
}
|
|
bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
|
|
&req->params.req.mac[req->params.req.num_mac],
|
|
ETH_ADDR_LEN);
|
|
req->params.req.num_mac = req->params.req.num_mac + 1;
|
|
}
|
|
#if __FreeBSD_version > 800000
|
|
IF_ADDR_RUNLOCK(ifp);
|
|
#endif
|
|
req->params.req.if_id = sc->if_id;
|
|
rc = oce_update_multicast(sc, &dma);
|
|
oce_dma_free(sc, &dma);
|
|
return rc;
|
|
}
|
|
|