freebsd-dev/sys/amd64/vmm/io/vrtc.c
John Baldwin 483d953a86 Initial support for bhyve save and restore.
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed.  In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken).  A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.

To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.

While the current implementation is useful for several uses cases, it
has a few limitations.  The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system).  In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions.  The file format also does not currently support
versioning of individual chunks of state.  As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files.  The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility.  As a result, the current implementation is not enabled
by default.  It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.

Submitted by:	Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by:	Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes:	yes
Sponsored by:	University Politehnica of Bucharest
Sponsored by:	Matthew Grooms (student scholarships)
Sponsored by:	iXsystems
Differential Revision:	https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00

1068 lines
26 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2014, Neel Natu (neel@freebsd.org)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_bhyve_snapshot.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/queue.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/clock.h>
#include <sys/sysctl.h>
#include <machine/vmm.h>
#include <machine/vmm_snapshot.h>
#include <isa/rtc.h>
#include "vmm_ktr.h"
#include "vatpic.h"
#include "vioapic.h"
#include "vrtc.h"
/* Register layout of the RTC */
struct rtcdev {
uint8_t sec;
uint8_t alarm_sec;
uint8_t min;
uint8_t alarm_min;
uint8_t hour;
uint8_t alarm_hour;
uint8_t day_of_week;
uint8_t day_of_month;
uint8_t month;
uint8_t year;
uint8_t reg_a;
uint8_t reg_b;
uint8_t reg_c;
uint8_t reg_d;
uint8_t nvram[36];
uint8_t century;
uint8_t nvram2[128 - 51];
} __packed;
CTASSERT(sizeof(struct rtcdev) == 128);
CTASSERT(offsetof(struct rtcdev, century) == RTC_CENTURY);
struct vrtc {
struct vm *vm;
struct mtx mtx;
struct callout callout;
u_int addr; /* RTC register to read or write */
sbintime_t base_uptime;
time_t base_rtctime;
struct rtcdev rtcdev;
};
#define VRTC_LOCK(vrtc) mtx_lock(&((vrtc)->mtx))
#define VRTC_UNLOCK(vrtc) mtx_unlock(&((vrtc)->mtx))
#define VRTC_LOCKED(vrtc) mtx_owned(&((vrtc)->mtx))
/*
* RTC time is considered "broken" if:
* - RTC updates are halted by the guest
* - RTC date/time fields have invalid values
*/
#define VRTC_BROKEN_TIME ((time_t)-1)
#define RTC_IRQ 8
#define RTCSB_BIN 0x04
#define RTCSB_ALL_INTRS (RTCSB_UINTR | RTCSB_AINTR | RTCSB_PINTR)
#define rtc_halted(vrtc) ((vrtc->rtcdev.reg_b & RTCSB_HALT) != 0)
#define aintr_enabled(vrtc) (((vrtc)->rtcdev.reg_b & RTCSB_AINTR) != 0)
#define pintr_enabled(vrtc) (((vrtc)->rtcdev.reg_b & RTCSB_PINTR) != 0)
#define uintr_enabled(vrtc) (((vrtc)->rtcdev.reg_b & RTCSB_UINTR) != 0)
static void vrtc_callout_handler(void *arg);
static void vrtc_set_reg_c(struct vrtc *vrtc, uint8_t newval);
static MALLOC_DEFINE(M_VRTC, "vrtc", "bhyve virtual rtc");
SYSCTL_DECL(_hw_vmm);
SYSCTL_NODE(_hw_vmm, OID_AUTO, vrtc, CTLFLAG_RW | CTLFLAG_MPSAFE, NULL,
NULL);
static int rtc_flag_broken_time = 1;
SYSCTL_INT(_hw_vmm_vrtc, OID_AUTO, flag_broken_time, CTLFLAG_RDTUN,
&rtc_flag_broken_time, 0, "Stop guest when invalid RTC time is detected");
static __inline bool
divider_enabled(int reg_a)
{
/*
* The RTC is counting only when dividers are not held in reset.
*/
return ((reg_a & 0x70) == 0x20);
}
static __inline bool
update_enabled(struct vrtc *vrtc)
{
/*
* RTC date/time can be updated only if:
* - divider is not held in reset
* - guest has not disabled updates
* - the date/time fields have valid contents
*/
if (!divider_enabled(vrtc->rtcdev.reg_a))
return (false);
if (rtc_halted(vrtc))
return (false);
if (vrtc->base_rtctime == VRTC_BROKEN_TIME)
return (false);
return (true);
}
static time_t
vrtc_curtime(struct vrtc *vrtc, sbintime_t *basetime)
{
sbintime_t now, delta;
time_t t, secs;
KASSERT(VRTC_LOCKED(vrtc), ("%s: vrtc not locked", __func__));
t = vrtc->base_rtctime;
*basetime = vrtc->base_uptime;
if (update_enabled(vrtc)) {
now = sbinuptime();
delta = now - vrtc->base_uptime;
KASSERT(delta >= 0, ("vrtc_curtime: uptime went backwards: "
"%#lx to %#lx", vrtc->base_uptime, now));
secs = delta / SBT_1S;
t += secs;
*basetime += secs * SBT_1S;
}
return (t);
}
static __inline uint8_t
rtcset(struct rtcdev *rtc, int val)
{
KASSERT(val >= 0 && val < 100, ("%s: invalid bin2bcd index %d",
__func__, val));
return ((rtc->reg_b & RTCSB_BIN) ? val : bin2bcd_data[val]);
}
static void
secs_to_rtc(time_t rtctime, struct vrtc *vrtc, int force_update)
{
struct clocktime ct;
struct timespec ts;
struct rtcdev *rtc;
int hour;
KASSERT(VRTC_LOCKED(vrtc), ("%s: vrtc not locked", __func__));
if (rtctime < 0) {
KASSERT(rtctime == VRTC_BROKEN_TIME,
("%s: invalid vrtc time %#lx", __func__, rtctime));
return;
}
/*
* If the RTC is halted then the guest has "ownership" of the
* date/time fields. Don't update the RTC date/time fields in
* this case (unless forced).
*/
if (rtc_halted(vrtc) && !force_update)
return;
ts.tv_sec = rtctime;
ts.tv_nsec = 0;
clock_ts_to_ct(&ts, &ct);
KASSERT(ct.sec >= 0 && ct.sec <= 59, ("invalid clocktime sec %d",
ct.sec));
KASSERT(ct.min >= 0 && ct.min <= 59, ("invalid clocktime min %d",
ct.min));
KASSERT(ct.hour >= 0 && ct.hour <= 23, ("invalid clocktime hour %d",
ct.hour));
KASSERT(ct.dow >= 0 && ct.dow <= 6, ("invalid clocktime wday %d",
ct.dow));
KASSERT(ct.day >= 1 && ct.day <= 31, ("invalid clocktime mday %d",
ct.day));
KASSERT(ct.mon >= 1 && ct.mon <= 12, ("invalid clocktime month %d",
ct.mon));
KASSERT(ct.year >= POSIX_BASE_YEAR, ("invalid clocktime year %d",
ct.year));
rtc = &vrtc->rtcdev;
rtc->sec = rtcset(rtc, ct.sec);
rtc->min = rtcset(rtc, ct.min);
if (rtc->reg_b & RTCSB_24HR) {
hour = ct.hour;
} else {
/*
* Convert to the 12-hour format.
*/
switch (ct.hour) {
case 0: /* 12 AM */
case 12: /* 12 PM */
hour = 12;
break;
default:
/*
* The remaining 'ct.hour' values are interpreted as:
* [1 - 11] -> 1 - 11 AM
* [13 - 23] -> 1 - 11 PM
*/
hour = ct.hour % 12;
break;
}
}
rtc->hour = rtcset(rtc, hour);
if ((rtc->reg_b & RTCSB_24HR) == 0 && ct.hour >= 12)
rtc->hour |= 0x80; /* set MSB to indicate PM */
rtc->day_of_week = rtcset(rtc, ct.dow + 1);
rtc->day_of_month = rtcset(rtc, ct.day);
rtc->month = rtcset(rtc, ct.mon);
rtc->year = rtcset(rtc, ct.year % 100);
rtc->century = rtcset(rtc, ct.year / 100);
}
static int
rtcget(struct rtcdev *rtc, int val, int *retval)
{
uint8_t upper, lower;
if (rtc->reg_b & RTCSB_BIN) {
*retval = val;
return (0);
}
lower = val & 0xf;
upper = (val >> 4) & 0xf;
if (lower > 9 || upper > 9)
return (-1);
*retval = upper * 10 + lower;
return (0);
}
static time_t
rtc_to_secs(struct vrtc *vrtc)
{
struct clocktime ct;
struct timespec ts;
struct rtcdev *rtc;
struct vm *vm;
int century, error, hour, pm, year;
KASSERT(VRTC_LOCKED(vrtc), ("%s: vrtc not locked", __func__));
vm = vrtc->vm;
rtc = &vrtc->rtcdev;
bzero(&ct, sizeof(struct clocktime));
error = rtcget(rtc, rtc->sec, &ct.sec);
if (error || ct.sec < 0 || ct.sec > 59) {
VM_CTR2(vm, "Invalid RTC sec %#x/%d", rtc->sec, ct.sec);
goto fail;
}
error = rtcget(rtc, rtc->min, &ct.min);
if (error || ct.min < 0 || ct.min > 59) {
VM_CTR2(vm, "Invalid RTC min %#x/%d", rtc->min, ct.min);
goto fail;
}
pm = 0;
hour = rtc->hour;
if ((rtc->reg_b & RTCSB_24HR) == 0) {
if (hour & 0x80) {
hour &= ~0x80;
pm = 1;
}
}
error = rtcget(rtc, hour, &ct.hour);
if ((rtc->reg_b & RTCSB_24HR) == 0) {
if (ct.hour >= 1 && ct.hour <= 12) {
/*
* Convert from 12-hour format to internal 24-hour
* representation as follows:
*
* 12-hour format ct.hour
* 12 AM 0
* 1 - 11 AM 1 - 11
* 12 PM 12
* 1 - 11 PM 13 - 23
*/
if (ct.hour == 12)
ct.hour = 0;
if (pm)
ct.hour += 12;
} else {
VM_CTR2(vm, "Invalid RTC 12-hour format %#x/%d",
rtc->hour, ct.hour);
goto fail;
}
}
if (error || ct.hour < 0 || ct.hour > 23) {
VM_CTR2(vm, "Invalid RTC hour %#x/%d", rtc->hour, ct.hour);
goto fail;
}
/*
* Ignore 'rtc->dow' because some guests like Linux don't bother
* setting it at all while others like OpenBSD/i386 set it incorrectly.
*
* clock_ct_to_ts() does not depend on 'ct.dow' anyways so ignore it.
*/
ct.dow = -1;
error = rtcget(rtc, rtc->day_of_month, &ct.day);
if (error || ct.day < 1 || ct.day > 31) {
VM_CTR2(vm, "Invalid RTC mday %#x/%d", rtc->day_of_month,
ct.day);
goto fail;
}
error = rtcget(rtc, rtc->month, &ct.mon);
if (error || ct.mon < 1 || ct.mon > 12) {
VM_CTR2(vm, "Invalid RTC month %#x/%d", rtc->month, ct.mon);
goto fail;
}
error = rtcget(rtc, rtc->year, &year);
if (error || year < 0 || year > 99) {
VM_CTR2(vm, "Invalid RTC year %#x/%d", rtc->year, year);
goto fail;
}
error = rtcget(rtc, rtc->century, &century);
ct.year = century * 100 + year;
if (error || ct.year < POSIX_BASE_YEAR) {
VM_CTR2(vm, "Invalid RTC century %#x/%d", rtc->century,
ct.year);
goto fail;
}
error = clock_ct_to_ts(&ct, &ts);
if (error || ts.tv_sec < 0) {
VM_CTR3(vm, "Invalid RTC clocktime.date %04d-%02d-%02d",
ct.year, ct.mon, ct.day);
VM_CTR3(vm, "Invalid RTC clocktime.time %02d:%02d:%02d",
ct.hour, ct.min, ct.sec);
goto fail;
}
return (ts.tv_sec); /* success */
fail:
/*
* Stop updating the RTC if the date/time fields programmed by
* the guest are invalid.
*/
VM_CTR0(vrtc->vm, "Invalid RTC date/time programming detected");
return (VRTC_BROKEN_TIME);
}
static int
vrtc_time_update(struct vrtc *vrtc, time_t newtime, sbintime_t newbase)
{
struct rtcdev *rtc;
sbintime_t oldbase;
time_t oldtime;
uint8_t alarm_sec, alarm_min, alarm_hour;
KASSERT(VRTC_LOCKED(vrtc), ("%s: vrtc not locked", __func__));
rtc = &vrtc->rtcdev;
alarm_sec = rtc->alarm_sec;
alarm_min = rtc->alarm_min;
alarm_hour = rtc->alarm_hour;
oldtime = vrtc->base_rtctime;
VM_CTR2(vrtc->vm, "Updating RTC secs from %#lx to %#lx",
oldtime, newtime);
oldbase = vrtc->base_uptime;
VM_CTR2(vrtc->vm, "Updating RTC base uptime from %#lx to %#lx",
oldbase, newbase);
vrtc->base_uptime = newbase;
if (newtime == oldtime)
return (0);
/*
* If 'newtime' indicates that RTC updates are disabled then just
* record that and return. There is no need to do alarm interrupt
* processing in this case.
*/
if (newtime == VRTC_BROKEN_TIME) {
vrtc->base_rtctime = VRTC_BROKEN_TIME;
return (0);
}
/*
* Return an error if RTC updates are halted by the guest.
*/
if (rtc_halted(vrtc)) {
VM_CTR0(vrtc->vm, "RTC update halted by guest");
return (EBUSY);
}
do {
/*
* If the alarm interrupt is enabled and 'oldtime' is valid
* then visit all the seconds between 'oldtime' and 'newtime'
* to check for the alarm condition.
*
* Otherwise move the RTC time forward directly to 'newtime'.
*/
if (aintr_enabled(vrtc) && oldtime != VRTC_BROKEN_TIME)
vrtc->base_rtctime++;
else
vrtc->base_rtctime = newtime;
if (aintr_enabled(vrtc)) {
/*
* Update the RTC date/time fields before checking
* if the alarm conditions are satisfied.
*/
secs_to_rtc(vrtc->base_rtctime, vrtc, 0);
if ((alarm_sec >= 0xC0 || alarm_sec == rtc->sec) &&
(alarm_min >= 0xC0 || alarm_min == rtc->min) &&
(alarm_hour >= 0xC0 || alarm_hour == rtc->hour)) {
vrtc_set_reg_c(vrtc, rtc->reg_c | RTCIR_ALARM);
}
}
} while (vrtc->base_rtctime != newtime);
if (uintr_enabled(vrtc))
vrtc_set_reg_c(vrtc, rtc->reg_c | RTCIR_UPDATE);
return (0);
}
static sbintime_t
vrtc_freq(struct vrtc *vrtc)
{
int ratesel;
static sbintime_t pf[16] = {
0,
SBT_1S / 256,
SBT_1S / 128,
SBT_1S / 8192,
SBT_1S / 4096,
SBT_1S / 2048,
SBT_1S / 1024,
SBT_1S / 512,
SBT_1S / 256,
SBT_1S / 128,
SBT_1S / 64,
SBT_1S / 32,
SBT_1S / 16,
SBT_1S / 8,
SBT_1S / 4,
SBT_1S / 2,
};
KASSERT(VRTC_LOCKED(vrtc), ("%s: vrtc not locked", __func__));
/*
* If both periodic and alarm interrupts are enabled then use the
* periodic frequency to drive the callout. The minimum periodic
* frequency (2 Hz) is higher than the alarm frequency (1 Hz) so
* piggyback the alarm on top of it. The same argument applies to
* the update interrupt.
*/
if (pintr_enabled(vrtc) && divider_enabled(vrtc->rtcdev.reg_a)) {
ratesel = vrtc->rtcdev.reg_a & 0xf;
return (pf[ratesel]);
} else if (aintr_enabled(vrtc) && update_enabled(vrtc)) {
return (SBT_1S);
} else if (uintr_enabled(vrtc) && update_enabled(vrtc)) {
return (SBT_1S);
} else {
return (0);
}
}
static void
vrtc_callout_reset(struct vrtc *vrtc, sbintime_t freqsbt)
{
KASSERT(VRTC_LOCKED(vrtc), ("%s: vrtc not locked", __func__));
if (freqsbt == 0) {
if (callout_active(&vrtc->callout)) {
VM_CTR0(vrtc->vm, "RTC callout stopped");
callout_stop(&vrtc->callout);
}
return;
}
VM_CTR1(vrtc->vm, "RTC callout frequency %d hz", SBT_1S / freqsbt);
callout_reset_sbt(&vrtc->callout, freqsbt, 0, vrtc_callout_handler,
vrtc, 0);
}
static void
vrtc_callout_handler(void *arg)
{
struct vrtc *vrtc = arg;
sbintime_t freqsbt, basetime;
time_t rtctime;
int error;
VM_CTR0(vrtc->vm, "vrtc callout fired");
VRTC_LOCK(vrtc);
if (callout_pending(&vrtc->callout)) /* callout was reset */
goto done;
if (!callout_active(&vrtc->callout)) /* callout was stopped */
goto done;
callout_deactivate(&vrtc->callout);
KASSERT((vrtc->rtcdev.reg_b & RTCSB_ALL_INTRS) != 0,
("gratuitous vrtc callout"));
if (pintr_enabled(vrtc))
vrtc_set_reg_c(vrtc, vrtc->rtcdev.reg_c | RTCIR_PERIOD);
if (aintr_enabled(vrtc) || uintr_enabled(vrtc)) {
rtctime = vrtc_curtime(vrtc, &basetime);
error = vrtc_time_update(vrtc, rtctime, basetime);
KASSERT(error == 0, ("%s: vrtc_time_update error %d",
__func__, error));
}
freqsbt = vrtc_freq(vrtc);
KASSERT(freqsbt != 0, ("%s: vrtc frequency cannot be zero", __func__));
vrtc_callout_reset(vrtc, freqsbt);
done:
VRTC_UNLOCK(vrtc);
}
static __inline void
vrtc_callout_check(struct vrtc *vrtc, sbintime_t freq)
{
int active;
active = callout_active(&vrtc->callout) ? 1 : 0;
KASSERT((freq == 0 && !active) || (freq != 0 && active),
("vrtc callout %s with frequency %#lx",
active ? "active" : "inactive", freq));
}
static void
vrtc_set_reg_c(struct vrtc *vrtc, uint8_t newval)
{
struct rtcdev *rtc;
int oldirqf, newirqf;
uint8_t oldval, changed;
KASSERT(VRTC_LOCKED(vrtc), ("%s: vrtc not locked", __func__));
rtc = &vrtc->rtcdev;
newval &= RTCIR_ALARM | RTCIR_PERIOD | RTCIR_UPDATE;
oldirqf = rtc->reg_c & RTCIR_INT;
if ((aintr_enabled(vrtc) && (newval & RTCIR_ALARM) != 0) ||
(pintr_enabled(vrtc) && (newval & RTCIR_PERIOD) != 0) ||
(uintr_enabled(vrtc) && (newval & RTCIR_UPDATE) != 0)) {
newirqf = RTCIR_INT;
} else {
newirqf = 0;
}
oldval = rtc->reg_c;
rtc->reg_c = newirqf | newval;
changed = oldval ^ rtc->reg_c;
if (changed) {
VM_CTR2(vrtc->vm, "RTC reg_c changed from %#x to %#x",
oldval, rtc->reg_c);
}
if (!oldirqf && newirqf) {
VM_CTR1(vrtc->vm, "RTC irq %d asserted", RTC_IRQ);
vatpic_pulse_irq(vrtc->vm, RTC_IRQ);
vioapic_pulse_irq(vrtc->vm, RTC_IRQ);
} else if (oldirqf && !newirqf) {
VM_CTR1(vrtc->vm, "RTC irq %d deasserted", RTC_IRQ);
}
}
static int
vrtc_set_reg_b(struct vrtc *vrtc, uint8_t newval)
{
struct rtcdev *rtc;
sbintime_t oldfreq, newfreq, basetime;
time_t curtime, rtctime;
int error;
uint8_t oldval, changed;
KASSERT(VRTC_LOCKED(vrtc), ("%s: vrtc not locked", __func__));
rtc = &vrtc->rtcdev;
oldval = rtc->reg_b;
oldfreq = vrtc_freq(vrtc);
rtc->reg_b = newval;
changed = oldval ^ newval;
if (changed) {
VM_CTR2(vrtc->vm, "RTC reg_b changed from %#x to %#x",
oldval, newval);
}
if (changed & RTCSB_HALT) {
if ((newval & RTCSB_HALT) == 0) {
rtctime = rtc_to_secs(vrtc);
basetime = sbinuptime();
if (rtctime == VRTC_BROKEN_TIME) {
if (rtc_flag_broken_time)
return (-1);
}
} else {
curtime = vrtc_curtime(vrtc, &basetime);
KASSERT(curtime == vrtc->base_rtctime, ("%s: mismatch "
"between vrtc basetime (%#lx) and curtime (%#lx)",
__func__, vrtc->base_rtctime, curtime));
/*
* Force a refresh of the RTC date/time fields so
* they reflect the time right before the guest set
* the HALT bit.
*/
secs_to_rtc(curtime, vrtc, 1);
/*
* Updates are halted so mark 'base_rtctime' to denote
* that the RTC date/time is in flux.
*/
rtctime = VRTC_BROKEN_TIME;
rtc->reg_b &= ~RTCSB_UINTR;
}
error = vrtc_time_update(vrtc, rtctime, basetime);
KASSERT(error == 0, ("vrtc_time_update error %d", error));
}
/*
* Side effect of changes to the interrupt enable bits.
*/
if (changed & RTCSB_ALL_INTRS)
vrtc_set_reg_c(vrtc, vrtc->rtcdev.reg_c);
/*
* Change the callout frequency if it has changed.
*/
newfreq = vrtc_freq(vrtc);
if (newfreq != oldfreq)
vrtc_callout_reset(vrtc, newfreq);
else
vrtc_callout_check(vrtc, newfreq);
/*
* The side effect of bits that control the RTC date/time format
* is handled lazily when those fields are actually read.
*/
return (0);
}
static void
vrtc_set_reg_a(struct vrtc *vrtc, uint8_t newval)
{
sbintime_t oldfreq, newfreq;
uint8_t oldval, changed;
KASSERT(VRTC_LOCKED(vrtc), ("%s: vrtc not locked", __func__));
newval &= ~RTCSA_TUP;
oldval = vrtc->rtcdev.reg_a;
oldfreq = vrtc_freq(vrtc);
if (divider_enabled(oldval) && !divider_enabled(newval)) {
VM_CTR2(vrtc->vm, "RTC divider held in reset at %#lx/%#lx",
vrtc->base_rtctime, vrtc->base_uptime);
} else if (!divider_enabled(oldval) && divider_enabled(newval)) {
/*
* If the dividers are coming out of reset then update
* 'base_uptime' before this happens. This is done to
* maintain the illusion that the RTC date/time was frozen
* while the dividers were disabled.
*/
vrtc->base_uptime = sbinuptime();
VM_CTR2(vrtc->vm, "RTC divider out of reset at %#lx/%#lx",
vrtc->base_rtctime, vrtc->base_uptime);
} else {
/* NOTHING */
}
vrtc->rtcdev.reg_a = newval;
changed = oldval ^ newval;
if (changed) {
VM_CTR2(vrtc->vm, "RTC reg_a changed from %#x to %#x",
oldval, newval);
}
/*
* Side effect of changes to rate select and divider enable bits.
*/
newfreq = vrtc_freq(vrtc);
if (newfreq != oldfreq)
vrtc_callout_reset(vrtc, newfreq);
else
vrtc_callout_check(vrtc, newfreq);
}
int
vrtc_set_time(struct vm *vm, time_t secs)
{
struct vrtc *vrtc;
int error;
vrtc = vm_rtc(vm);
VRTC_LOCK(vrtc);
error = vrtc_time_update(vrtc, secs, sbinuptime());
VRTC_UNLOCK(vrtc);
if (error) {
VM_CTR2(vrtc->vm, "Error %d setting RTC time to %#lx", error,
secs);
} else {
VM_CTR1(vrtc->vm, "RTC time set to %#lx", secs);
}
return (error);
}
time_t
vrtc_get_time(struct vm *vm)
{
struct vrtc *vrtc;
sbintime_t basetime;
time_t t;
vrtc = vm_rtc(vm);
VRTC_LOCK(vrtc);
t = vrtc_curtime(vrtc, &basetime);
VRTC_UNLOCK(vrtc);
return (t);
}
int
vrtc_nvram_write(struct vm *vm, int offset, uint8_t value)
{
struct vrtc *vrtc;
uint8_t *ptr;
vrtc = vm_rtc(vm);
/*
* Don't allow writes to RTC control registers or the date/time fields.
*/
if (offset < offsetof(struct rtcdev, nvram[0]) ||
offset == RTC_CENTURY || offset >= sizeof(struct rtcdev)) {
VM_CTR1(vrtc->vm, "RTC nvram write to invalid offset %d",
offset);
return (EINVAL);
}
VRTC_LOCK(vrtc);
ptr = (uint8_t *)(&vrtc->rtcdev);
ptr[offset] = value;
VM_CTR2(vrtc->vm, "RTC nvram write %#x to offset %#x", value, offset);
VRTC_UNLOCK(vrtc);
return (0);
}
int
vrtc_nvram_read(struct vm *vm, int offset, uint8_t *retval)
{
struct vrtc *vrtc;
sbintime_t basetime;
time_t curtime;
uint8_t *ptr;
/*
* Allow all offsets in the RTC to be read.
*/
if (offset < 0 || offset >= sizeof(struct rtcdev))
return (EINVAL);
vrtc = vm_rtc(vm);
VRTC_LOCK(vrtc);
/*
* Update RTC date/time fields if necessary.
*/
if (offset < 10 || offset == RTC_CENTURY) {
curtime = vrtc_curtime(vrtc, &basetime);
secs_to_rtc(curtime, vrtc, 0);
}
ptr = (uint8_t *)(&vrtc->rtcdev);
*retval = ptr[offset];
VRTC_UNLOCK(vrtc);
return (0);
}
int
vrtc_addr_handler(struct vm *vm, int vcpuid, bool in, int port, int bytes,
uint32_t *val)
{
struct vrtc *vrtc;
vrtc = vm_rtc(vm);
if (bytes != 1)
return (-1);
if (in) {
*val = 0xff;
return (0);
}
VRTC_LOCK(vrtc);
vrtc->addr = *val & 0x7f;
VRTC_UNLOCK(vrtc);
return (0);
}
int
vrtc_data_handler(struct vm *vm, int vcpuid, bool in, int port, int bytes,
uint32_t *val)
{
struct vrtc *vrtc;
struct rtcdev *rtc;
sbintime_t basetime;
time_t curtime;
int error, offset;
vrtc = vm_rtc(vm);
rtc = &vrtc->rtcdev;
if (bytes != 1)
return (-1);
VRTC_LOCK(vrtc);
offset = vrtc->addr;
if (offset >= sizeof(struct rtcdev)) {
VRTC_UNLOCK(vrtc);
return (-1);
}
error = 0;
curtime = vrtc_curtime(vrtc, &basetime);
vrtc_time_update(vrtc, curtime, basetime);
/*
* Update RTC date/time fields if necessary.
*
* This is not just for reads of the RTC. The side-effect of writing
* the century byte requires other RTC date/time fields (e.g. sec)
* to be updated here.
*/
if (offset < 10 || offset == RTC_CENTURY)
secs_to_rtc(curtime, vrtc, 0);
if (in) {
if (offset == 12) {
/*
* XXX
* reg_c interrupt flags are updated only if the
* corresponding interrupt enable bit in reg_b is set.
*/
*val = vrtc->rtcdev.reg_c;
vrtc_set_reg_c(vrtc, 0);
} else {
*val = *((uint8_t *)rtc + offset);
}
VCPU_CTR2(vm, vcpuid, "Read value %#x from RTC offset %#x",
*val, offset);
} else {
switch (offset) {
case 10:
VCPU_CTR1(vm, vcpuid, "RTC reg_a set to %#x", *val);
vrtc_set_reg_a(vrtc, *val);
break;
case 11:
VCPU_CTR1(vm, vcpuid, "RTC reg_b set to %#x", *val);
error = vrtc_set_reg_b(vrtc, *val);
break;
case 12:
VCPU_CTR1(vm, vcpuid, "RTC reg_c set to %#x (ignored)",
*val);
break;
case 13:
VCPU_CTR1(vm, vcpuid, "RTC reg_d set to %#x (ignored)",
*val);
break;
case 0:
/*
* High order bit of 'seconds' is readonly.
*/
*val &= 0x7f;
/* FALLTHRU */
default:
VCPU_CTR2(vm, vcpuid, "RTC offset %#x set to %#x",
offset, *val);
*((uint8_t *)rtc + offset) = *val;
break;
}
/*
* XXX some guests (e.g. OpenBSD) write the century byte
* outside of RTCSB_HALT so re-calculate the RTC date/time.
*/
if (offset == RTC_CENTURY && !rtc_halted(vrtc)) {
curtime = rtc_to_secs(vrtc);
error = vrtc_time_update(vrtc, curtime, sbinuptime());
KASSERT(!error, ("vrtc_time_update error %d", error));
if (curtime == VRTC_BROKEN_TIME && rtc_flag_broken_time)
error = -1;
}
}
VRTC_UNLOCK(vrtc);
return (error);
}
void
vrtc_reset(struct vrtc *vrtc)
{
struct rtcdev *rtc;
VRTC_LOCK(vrtc);
rtc = &vrtc->rtcdev;
vrtc_set_reg_b(vrtc, rtc->reg_b & ~(RTCSB_ALL_INTRS | RTCSB_SQWE));
vrtc_set_reg_c(vrtc, 0);
KASSERT(!callout_active(&vrtc->callout), ("rtc callout still active"));
VRTC_UNLOCK(vrtc);
}
struct vrtc *
vrtc_init(struct vm *vm)
{
struct vrtc *vrtc;
struct rtcdev *rtc;
time_t curtime;
vrtc = malloc(sizeof(struct vrtc), M_VRTC, M_WAITOK | M_ZERO);
vrtc->vm = vm;
mtx_init(&vrtc->mtx, "vrtc lock", NULL, MTX_DEF);
callout_init(&vrtc->callout, 1);
/* Allow dividers to keep time but disable everything else */
rtc = &vrtc->rtcdev;
rtc->reg_a = 0x20;
rtc->reg_b = RTCSB_24HR;
rtc->reg_c = 0;
rtc->reg_d = RTCSD_PWR;
/* Reset the index register to a safe value. */
vrtc->addr = RTC_STATUSD;
/*
* Initialize RTC time to 00:00:00 Jan 1, 1970.
*/
curtime = 0;
VRTC_LOCK(vrtc);
vrtc->base_rtctime = VRTC_BROKEN_TIME;
vrtc_time_update(vrtc, curtime, sbinuptime());
secs_to_rtc(curtime, vrtc, 0);
VRTC_UNLOCK(vrtc);
return (vrtc);
}
void
vrtc_cleanup(struct vrtc *vrtc)
{
callout_drain(&vrtc->callout);
free(vrtc, M_VRTC);
}
#ifdef BHYVE_SNAPSHOT
int
vrtc_snapshot(struct vrtc *vrtc, struct vm_snapshot_meta *meta)
{
int ret;
VRTC_LOCK(vrtc);
SNAPSHOT_VAR_OR_LEAVE(vrtc->addr, meta, ret, done);
if (meta->op == VM_SNAPSHOT_RESTORE)
vrtc->base_uptime = sbinuptime();
SNAPSHOT_VAR_OR_LEAVE(vrtc->base_rtctime, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.sec, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.alarm_sec, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.min, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.alarm_min, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.hour, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.alarm_hour, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.day_of_week, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.day_of_month, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.month, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.year, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.reg_a, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.reg_b, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.reg_c, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.reg_d, meta, ret, done);
SNAPSHOT_BUF_OR_LEAVE(vrtc->rtcdev.nvram, sizeof(vrtc->rtcdev.nvram),
meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(vrtc->rtcdev.century, meta, ret, done);
SNAPSHOT_BUF_OR_LEAVE(vrtc->rtcdev.nvram2, sizeof(vrtc->rtcdev.nvram2),
meta, ret, done);
vrtc_callout_reset(vrtc, vrtc_freq(vrtc));
VRTC_UNLOCK(vrtc);
done:
return (ret);
}
#endif