freebsd-dev/contrib/sendmail/libsm/local.h
2004-08-01 01:04:57 +00:00

329 lines
10 KiB
C

/*
* Copyright (c) 2000-2002, 2004 Sendmail, Inc. and its suppliers.
* All rights reserved.
* Copyright (c) 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Chris Torek.
*
* By using this file, you agree to the terms and conditions set
* forth in the LICENSE file which can be found at the top level of
* the sendmail distribution.
*
* $Id: local.h,v 1.53 2004/01/09 18:34:22 ca Exp $
*/
/*
** Information local to this implementation of stdio,
** in particular, macros and private variables.
*/
#include <sys/time.h>
#if !SM_CONF_MEMCHR
# include <memory.h>
#endif /* !SM_CONF_MEMCHR */
#include <sm/heap.h>
int sm_flush __P((SM_FILE_T *, int *));
SM_FILE_T *smfp __P((void));
int sm_refill __P((SM_FILE_T *, int));
void sm_init __P((void));
void sm_cleanup __P((void));
void sm_makebuf __P((SM_FILE_T *));
int sm_whatbuf __P((SM_FILE_T *, size_t *, int *));
int sm_fwalk __P((int (*)(SM_FILE_T *, int *), int *));
int sm_wsetup __P((SM_FILE_T *));
int sm_flags __P((int));
SM_FILE_T *sm_fp __P((const SM_FILE_T *, const int, SM_FILE_T *));
int sm_vprintf __P((int, char const *, va_list));
/* std io functions */
ssize_t sm_stdread __P((SM_FILE_T *, char *, size_t));
ssize_t sm_stdwrite __P((SM_FILE_T *, char const *, size_t));
off_t sm_stdseek __P((SM_FILE_T *, off_t, int));
int sm_stdclose __P((SM_FILE_T *));
int sm_stdopen __P((SM_FILE_T *, const void *, int, const void *));
int sm_stdfdopen __P((SM_FILE_T *, const void *, int, const void *));
int sm_stdsetinfo __P((SM_FILE_T *, int , void *));
int sm_stdgetinfo __P((SM_FILE_T *, int , void *));
/* stdio io functions */
ssize_t sm_stdioread __P((SM_FILE_T *, char *, size_t));
ssize_t sm_stdiowrite __P((SM_FILE_T *, char const *, size_t));
off_t sm_stdioseek __P((SM_FILE_T *, off_t, int));
int sm_stdioclose __P((SM_FILE_T *));
int sm_stdioopen __P((SM_FILE_T *, const void *, int, const void *));
int sm_stdiosetinfo __P((SM_FILE_T *, int , void *));
int sm_stdiogetinfo __P((SM_FILE_T *, int , void *));
/* string io functions */
ssize_t sm_strread __P((SM_FILE_T *, char *, size_t));
ssize_t sm_strwrite __P((SM_FILE_T *, char const *, size_t));
off_t sm_strseek __P((SM_FILE_T *, off_t, int));
int sm_strclose __P((SM_FILE_T *));
int sm_stropen __P((SM_FILE_T *, const void *, int, const void *));
int sm_strsetinfo __P((SM_FILE_T *, int , void *));
int sm_strgetinfo __P((SM_FILE_T *, int , void *));
/* syslog io functions */
ssize_t sm_syslogread __P((SM_FILE_T *, char *, size_t));
ssize_t sm_syslogwrite __P((SM_FILE_T *, char const *, size_t));
off_t sm_syslogseek __P((SM_FILE_T *, off_t, int));
int sm_syslogclose __P((SM_FILE_T *));
int sm_syslogopen __P((SM_FILE_T *, const void *, int, const void *));
int sm_syslogsetinfo __P((SM_FILE_T *, int , void *));
int sm_sysloggetinfo __P((SM_FILE_T *, int , void *));
/* should be defined in sys/time.h */
#ifndef timersub
# define timersub(tvp, uvp, vvp) \
do \
{ \
(vvp)->tv_sec = (tvp)->tv_sec - (uvp)->tv_sec; \
(vvp)->tv_usec = (tvp)->tv_usec - (uvp)->tv_usec; \
if ((vvp)->tv_usec < 0) \
{ \
(vvp)->tv_sec--; \
(vvp)->tv_usec += 1000000; \
} \
} while (0)
#endif /* !timersub */
#ifndef timeradd
# define timeradd(tvp, uvp, vvp) \
do \
{ \
(vvp)->tv_sec = (tvp)->tv_sec + (uvp)->tv_sec; \
(vvp)->tv_usec = (tvp)->tv_usec + (uvp)->tv_usec; \
if ((vvp)->tv_usec >= 1000000) \
{ \
(vvp)->tv_sec++; \
(vvp)->tv_usec -= 1000000; \
} \
} while (0)
#endif /* !timeradd */
#ifndef timercmp
# define timercmp(tvp, uvp, cmp) \
(((tvp)->tv_sec == (uvp)->tv_sec) ? \
((tvp)->tv_usec cmp (uvp)->tv_usec) : \
((tvp)->tv_sec cmp (uvp)->tv_sec))
#endif /* !timercmp */
extern bool Sm_IO_DidInit;
/* Return true iff the given SM_FILE_T cannot be written now. */
#define cantwrite(fp) \
((((fp)->f_flags & SMWR) == 0 || (fp)->f_bf.smb_base == NULL) && \
sm_wsetup(fp))
/*
** Test whether the given stdio file has an active ungetc buffer;
** release such a buffer, without restoring ordinary unread data.
*/
#define HASUB(fp) ((fp)->f_ub.smb_base != NULL)
#define FREEUB(fp) \
{ \
if ((fp)->f_ub.smb_base != (fp)->f_ubuf) \
sm_free((char *)(fp)->f_ub.smb_base); \
(fp)->f_ub.smb_base = NULL; \
}
extern const char SmFileMagic[];
#define SM_ALIGN(p) (((unsigned long)(p) + SM_ALIGN_BITS) & ~SM_ALIGN_BITS)
#define sm_io_flockfile(fp) ((void) 0)
#define sm_io_funlockfile(fp) ((void) 0)
#ifndef FDSET_CAST
# define FDSET_CAST /* empty cast for fd_set arg to select */
#endif
/*
** SM_CONVERT_TIME -- convert the API timeout flag for select() usage.
**
** This takes a 'fp' (a file type pointer) and obtains the "raw"
** file descriptor (fd) if possible. The 'fd' is needed to possibly
** switch the mode of the file (blocking/non-blocking) to match
** the type of timeout. If timeout is SM_TIME_FOREVER then the
** timeout using select won't be needed and the file is best placed
** in blocking mode. If there is to be a finite timeout then the file
** is best placed in non-blocking mode. Then, if not enough can be
** written, select() can be used to test when something can be written
** yet still timeout if the wait is too long.
** If the mode is already in the correct state we don't change it.
** Iff (yes "iff") the 'fd' is "-1" in value then the mode change
** will not happen. This situation arises when a late-binding-to-disk
** file type is in use. An example of this is the sendmail buffered
** file type (in sendmail/bf.c).
**
** Parameters
** fp -- the file pointer the timeout is for
** fd -- to become the file descriptor value from 'fp'
** val -- the timeout value to be converted
** time -- a struct timeval holding the converted value
**
** Returns
** nothing, this is flow-through code
**
** Side Effects:
** May or may not change the mode of a currently open file.
** The file mode may be changed to O_NONBLOCK or ~O_NONBLOCK
** (meaning block). This is done to best match the type of
** timeout and for (possible) use with select().
*/
# define SM_CONVERT_TIME(fp, fd, val, time) { \
if (((fd) = sm_io_getinfo(fp, SM_IO_WHAT_FD, NULL)) == -1) \
{ \
/* can't get an fd, likely internal 'fake' fp */ \
errno = 0; \
} \
if ((val) == SM_TIME_DEFAULT) \
(val) = (fp)->f_timeout; \
if ((val) == SM_TIME_IMMEDIATE || (val) == SM_TIME_FOREVER) \
{ \
(time)->tv_sec = 0; \
(time)->tv_usec = 0; \
} \
else \
{ \
(time)->tv_sec = (val) / 1000; \
(time)->tv_usec = ((val) - ((time)->tv_sec * 1000)) * 10; \
} \
if ((val) == SM_TIME_FOREVER) \
{ \
if ((fp)->f_timeoutstate == SM_TIME_NONBLOCK && (fd) != -1) \
{ \
int ret; \
ret = fcntl((fd), F_GETFL, 0); \
if (ret == -1 || fcntl((fd), F_SETFL, \
ret & ~O_NONBLOCK) == -1) \
{ \
/* errno should be set */ \
return SM_IO_EOF; \
} \
(fp)->f_timeoutstate = SM_TIME_BLOCK; \
if ((fp)->f_modefp != NULL) \
(fp)->f_modefp->f_timeoutstate = SM_TIME_BLOCK; \
} \
} \
else { \
if ((fp)->f_timeoutstate == SM_TIME_BLOCK && (fd) != -1) \
{ \
int ret; \
ret = fcntl((fd), F_GETFL, 0); \
if (ret == -1 || fcntl((fd), F_SETFL, \
ret | O_NONBLOCK) == -1) \
{ \
/* errno should be set */ \
return SM_IO_EOF; \
} \
(fp)->f_timeoutstate = SM_TIME_NONBLOCK; \
if ((fp)->f_modefp != NULL) \
(fp)->f_modefp->f_timeoutstate = SM_TIME_NONBLOCK; \
} \
} \
}
/*
** SM_IO_WR_TIMEOUT -- setup the timeout for the write
**
** This #define uses a select() to wait for the 'fd' to become writable.
** The select() can be active for up to 'to' time. The select may not
** use all of the the 'to' time. Hence, the amount of "wall-clock" time is
** measured to decide how much to subtract from 'to' to update it. On some
** BSD-based/like systems the timeout for a select is updated for the
** amount of time used. On many/most systems this does not happen. Therefore
** the updating of 'to' must be done ourselves; a copy of 'to' is passed
** since a BSD-like system will have updated it and we don't want to
** double the time used!
** Note: if a valid 'fd' doesn't exist yet, don't use this (e.g. the
** sendmail buffered file type in sendmail/bf.c; see fvwrite.c).
**
** Parameters
** fd -- a file descriptor for doing select() with
** timeout -- the original user set value.
**
** Returns
** nothing, this is flow through code
**
** Side Effects:
** adjusts 'timeout' for time used
*/
#define SM_IO_WR_TIMEOUT(fp, fd, to) { \
struct timeval sm_io_to_before, sm_io_to_after, sm_io_to_diff; \
struct timeval sm_io_to; \
int sm_io_to_sel; \
fd_set sm_io_to_mask, sm_io_x_mask; \
errno = 0; \
if ((to) == SM_TIME_DEFAULT) \
(to) = (fp)->f_timeout; \
if ((to) == SM_TIME_IMMEDIATE) \
{ \
errno = EAGAIN; \
return SM_IO_EOF; \
} \
else if ((to) == SM_TIME_FOREVER) \
{ \
errno = EINVAL; \
return SM_IO_EOF; \
} \
else \
{ \
sm_io_to.tv_sec = (to) / 1000; \
sm_io_to.tv_usec = ((to) - (sm_io_to.tv_sec * 1000)) * 10; \
} \
if (FD_SETSIZE > 0 && (fd) >= FD_SETSIZE) \
{ \
errno = EINVAL; \
return SM_IO_EOF; \
} \
FD_ZERO(&sm_io_to_mask); \
FD_SET((fd), &sm_io_to_mask); \
FD_ZERO(&sm_io_x_mask); \
FD_SET((fd), &sm_io_x_mask); \
if (gettimeofday(&sm_io_to_before, NULL) < 0) \
return SM_IO_EOF; \
sm_io_to_sel = select((fd) + 1, NULL, &sm_io_to_mask, &sm_io_x_mask, \
&sm_io_to); \
if (sm_io_to_sel < 0) \
{ \
/* something went wrong, errno set */ \
return SM_IO_EOF; \
} \
else if (sm_io_to_sel == 0) \
{ \
/* timeout */ \
errno = EAGAIN; \
return SM_IO_EOF; \
} \
/* else loop again */ \
if (gettimeofday(&sm_io_to_after, NULL) < 0) \
return SM_IO_EOF; \
timersub(&sm_io_to_before, &sm_io_to_after, &sm_io_to_diff); \
timersub(&sm_io_to, &sm_io_to_diff, &sm_io_to); \
(to) -= (sm_io_to.tv_sec * 1000); \
(to) -= (sm_io_to.tv_usec / 10); \
if ((to) < 0) \
(to) = 0; \
}
/*
** If there is no 'fd' just error (we can't timeout). If the timeout
** is SM_TIME_FOREVER then there is no need to do a timeout with
** select since this will be a real error. If the error is not
** EAGAIN/EWOULDBLOCK (from a nonblocking) then it's a real error.
** Specify the condition here as macro so it can be used in several places.
*/
#define IS_IO_ERROR(fd, ret, to) \
((fd) < 0 || \
((ret) < 0 && errno != EAGAIN && errno != EWOULDBLOCK) || \
(to) == SM_TIME_FOREVER)