freebsd-dev/sys/sparc64/sbus/sbus.c

895 lines
27 KiB
C

/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This software was developed by the Computer Systems Engineering group
* at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
* contributed to Berkeley.
*
* All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Copyright (c) 1999 Eduardo Horvath
* Copyright (c) 2002 by Thomas Moestl <tmm@FreeBSD.org>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)sbus.c 8.1 (Berkeley) 6/11/93
* from: NetBSD: sbus.c,v 1.46 2001/10/07 20:30:41 eeh Exp
*
* $FreeBSD$
*/
/*
* Sbus support.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/pcpu.h>
#include <sys/reboot.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/bus_private.h>
#include <machine/iommureg.h>
#include <machine/bus_common.h>
#include <machine/frame.h>
#include <machine/intr_machdep.h>
#include <machine/nexusvar.h>
#include <machine/ofw_upa.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <machine/iommuvar.h>
#include <sparc64/sbus/ofw_sbus.h>
#include <sparc64/sbus/sbusreg.h>
#include <sparc64/sbus/sbusvar.h>
#ifdef DEBUG
#define SDB_DVMA 0x1
#define SDB_INTR 0x2
int sbus_debug = 0;
#define DPRINTF(l, s) do { if (sbus_debug & l) printf s; } while (0)
#else
#define DPRINTF(l, s)
#endif
struct sbus_devinfo {
int sdi_burstsz;
char *sdi_compat;
char *sdi_name; /* PROM name */
phandle_t sdi_node; /* PROM node */
int sdi_slot;
char *sdi_type; /* PROM name */
struct resource_list sdi_rl;
};
/* Range descriptor, allocated for each sc_range. */
struct sbus_rd {
bus_addr_t rd_poffset;
bus_addr_t rd_pend;
int rd_slot;
bus_addr_t rd_coffset;
bus_addr_t rd_cend;
struct rman rd_rman;
bus_space_handle_t rd_bushandle;
struct resource *rd_res;
};
struct sbus_softc {
bus_space_tag_t sc_bustag;
bus_space_handle_t sc_bushandle;
bus_dma_tag_t sc_dmatag;
bus_dma_tag_t sc_cdmatag;
bus_space_tag_t sc_cbustag;
int sc_clockfreq; /* clock frequency (in Hz) */
struct upa_regs *sc_reg;
int sc_nreg;
int sc_nrange;
struct sbus_rd *sc_rd;
int sc_burst; /* burst transfer sizes supported */
int *sc_intr_compat;/* `intr' property to sbus compat */
struct resource *sc_sysio_res;
int sc_ign; /* Interrupt group number for this sysio */
struct iommu_state sc_is; /* IOMMU state, see iommureg.h */
struct resource *sc_ot_ires;
void *sc_ot_ihand;
struct resource *sc_pf_ires;
void *sc_pf_ihand;
};
struct sbus_clr {
struct sbus_softc *scl_sc;
bus_addr_t scl_clr; /* clear register */
driver_intr_t *scl_handler; /* handler to call */
void *scl_arg; /* argument for the handler */
void *scl_cookie; /* interrupt cookie of parent bus */
};
#define SYSIO_READ8(sc, off) \
bus_space_read_8((sc)->sc_bustag, (sc)->sc_bushandle, (off))
#define SYSIO_WRITE8(sc, off, v) \
bus_space_write_8((sc)->sc_bustag, (sc)->sc_bushandle, (off), (v))
static int sbus_probe(device_t dev);
static int sbus_print_child(device_t dev, device_t child);
static void sbus_probe_nomatch(device_t dev, device_t child);
static int sbus_read_ivar(device_t, device_t, int, u_long *);
static struct resource_list *sbus_get_resource_list(device_t dev,
device_t child);
static int sbus_setup_intr(device_t, device_t, struct resource *, int,
driver_intr_t *, void *, void **);
static int sbus_teardown_intr(device_t, device_t, struct resource *, void *);
static struct resource *sbus_alloc_resource(device_t, device_t, int, int *,
u_long, u_long, u_long, u_int);
static int sbus_activate_resource(device_t, device_t, int, int,
struct resource *);
static int sbus_deactivate_resource(device_t, device_t, int, int,
struct resource *);
static int sbus_release_resource(device_t, device_t, int, int,
struct resource *);
static struct sbus_devinfo * sbus_setup_dinfo(struct sbus_softc *sc,
phandle_t node, char *name);
static void sbus_destroy_dinfo(struct sbus_devinfo *dinfo);
static void sbus_intr_stub(void *);
static bus_space_tag_t sbus_alloc_bustag(struct sbus_softc *);
static void sbus_overtemp(void *);
static void sbus_pwrfail(void *);
static device_method_t sbus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, sbus_probe),
DEVMETHOD(device_attach, bus_generic_attach),
/* Bus interface */
DEVMETHOD(bus_print_child, sbus_print_child),
DEVMETHOD(bus_probe_nomatch, sbus_probe_nomatch),
DEVMETHOD(bus_read_ivar, sbus_read_ivar),
DEVMETHOD(bus_setup_intr, sbus_setup_intr),
DEVMETHOD(bus_teardown_intr, sbus_teardown_intr),
DEVMETHOD(bus_alloc_resource, sbus_alloc_resource),
DEVMETHOD(bus_activate_resource, sbus_activate_resource),
DEVMETHOD(bus_deactivate_resource, sbus_deactivate_resource),
DEVMETHOD(bus_release_resource, sbus_release_resource),
DEVMETHOD(bus_get_resource_list, sbus_get_resource_list),
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
{ 0, 0 }
};
static driver_t sbus_driver = {
"sbus",
sbus_methods,
sizeof(struct sbus_softc),
};
static devclass_t sbus_devclass;
DRIVER_MODULE(sbus, nexus, sbus_driver, sbus_devclass, 0, 0);
#define OFW_SBUS_TYPE "sbus"
#define OFW_SBUS_NAME "sbus"
static int
sbus_probe(device_t dev)
{
struct sbus_softc *sc = device_get_softc(dev);
struct sbus_devinfo *sdi;
struct sbus_ranges *range;
struct resource *res;
device_t cdev;
bus_addr_t phys;
bus_size_t size;
char *name, *cname, *t;
phandle_t child, node = nexus_get_node(dev);
u_int64_t mr;
int intr, clock, rid, vec, i;
t = nexus_get_device_type(dev);
if (((t == NULL || strcmp(t, OFW_SBUS_TYPE) != 0)) &&
strcmp(nexus_get_name(dev), OFW_SBUS_NAME) != 0)
return (ENXIO);
device_set_desc(dev, "U2S UPA-SBus bridge");
if ((sc->sc_nreg = OF_getprop_alloc(node, "reg", sizeof(*sc->sc_reg),
(void **)&sc->sc_reg)) == -1) {
panic("sbus_probe: error getting reg property");
}
if (sc->sc_nreg < 1)
panic("sbus_probe: bogus properties");
phys = UPA_REG_PHYS(&sc->sc_reg[0]);
size = UPA_REG_SIZE(&sc->sc_reg[0]);
rid = 0;
sc->sc_sysio_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, phys,
phys + size - 1, size, RF_ACTIVE);
if (sc->sc_sysio_res == NULL ||
rman_get_start(sc->sc_sysio_res) != phys)
panic("sbus_probe: can't allocate device memory");
sc->sc_bustag = rman_get_bustag(sc->sc_sysio_res);
sc->sc_bushandle = rman_get_bushandle(sc->sc_sysio_res);
if (OF_getprop(node, "interrupts", &intr, sizeof(intr)) == -1)
panic("sbus_probe: cannot get IGN");
sc->sc_ign = intr & INTMAP_IGN_MASK; /* Find interrupt group no */
sc->sc_cbustag = sbus_alloc_bustag(sc);
/*
* Record clock frequency for synchronous SCSI.
* IS THIS THE CORRECT DEFAULT??
*/
if (OF_getprop(node, "clock-frequency", &clock, sizeof(clock)) == -1)
clock = 25000000;
sc->sc_clockfreq = clock;
clock /= 1000;
device_printf(dev, "clock %d.%03d MHz\n", clock / 1000, clock % 1000);
/*
* Collect address translations from the OBP.
*/
if ((sc->sc_nrange = OF_getprop_alloc(node, "ranges",
sizeof(*range), (void **)&range)) == -1) {
panic("%s: error getting ranges property",
device_get_name(dev));
}
sc->sc_rd = (struct sbus_rd *)malloc(sizeof(*sc->sc_rd) * sc->sc_nrange,
M_DEVBUF, M_NOWAIT);
if (sc->sc_rd == NULL)
panic("sbus_probe: could not allocate rmans");
/*
* Preallocate all space that the SBus bridge decodes, so that nothing
* else gets in the way; set up rmans etc.
*/
for (i = 0; i < sc->sc_nrange; i++) {
phys = range[i].poffset | ((bus_addr_t)range[i].pspace << 32);
size = range[i].size;
sc->sc_rd[i].rd_slot = range[i].cspace;
sc->sc_rd[i].rd_coffset = range[i].coffset;
sc->sc_rd[i].rd_cend = sc->sc_rd[i].rd_coffset + size;
rid = 0;
if ((res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, phys,
phys + size - 1, size, RF_ACTIVE)) == NULL)
panic("sbus_probe: could not allocate decoded range");
sc->sc_rd[i].rd_bushandle = rman_get_bushandle(res);
sc->sc_rd[i].rd_rman.rm_type = RMAN_ARRAY;
sc->sc_rd[i].rd_rman.rm_descr = "SBus Device Memory";
if (rman_init(&sc->sc_rd[i].rd_rman) != 0 ||
rman_manage_region(&sc->sc_rd[i].rd_rman, 0, size) != 0)
panic("sbus_probe: failed to set up memory rman");
sc->sc_rd[i].rd_poffset = phys;
sc->sc_rd[i].rd_pend = phys + size;
sc->sc_rd[i].rd_res = res;
}
free(range, M_OFWPROP);
/*
* Get the SBus burst transfer size if burst transfers are supported.
* XXX: is the default correct?
*/
if (OF_getprop(node, "burst-sizes", &sc->sc_burst,
sizeof(sc->sc_burst)) == -1 || sc->sc_burst == 0)
sc->sc_burst = SBUS_BURST_DEF;
/* initalise the IOMMU */
/* punch in our copies */
sc->sc_is.is_bustag = sc->sc_bustag;
sc->sc_is.is_bushandle = sc->sc_bushandle;
sc->sc_is.is_iommu = SBR_IOMMU;
sc->sc_is.is_dtag = SBR_IOMMU_TLB_TAG_DIAG;
sc->sc_is.is_ddram = SBR_IOMMU_TLB_DATA_DIAG;
sc->sc_is.is_dqueue = SBR_IOMMU_QUEUE_DIAG;
sc->sc_is.is_dva = SBR_IOMMU_SVADIAG;
sc->sc_is.is_dtcmp = 0;
sc->sc_is.is_sb[0] = SBR_STRBUF;
sc->sc_is.is_sb[1] = NULL;
/* give us a nice name.. */
name = (char *)malloc(32, M_DEVBUF, M_NOWAIT);
if (name == 0)
panic("sbus_probe: couldn't malloc iommu name");
snprintf(name, 32, "%s dvma", device_get_name(dev));
/*
* Note: the SBus IOMMU ignores the high bits of an address, so a NULL
* DMA pointer will be translated by the first page of the IOTSB.
* To detect bugs we'll allocate and ignore the first entry.
*/
iommu_init(name, &sc->sc_is, 3, -1, 1);
/* Create the DMA tag. */
sc->sc_dmatag = nexus_get_dmatag(dev);
if (bus_dma_tag_create(sc->sc_dmatag, 8, 1, 0, 0x3ffffffff, NULL, NULL,
0x3ffffffff, 0xff, 0xffffffff, 0, NULL, NULL, &sc->sc_cdmatag) != 0)
panic("bus_dma_tag_create failed");
/* Customize the tag. */
sc->sc_cdmatag->dt_cookie = &sc->sc_is;
sc->sc_cdmatag->dt_mt = &iommu_dma_methods;
/* XXX: register as root dma tag (kludge). */
sparc64_root_dma_tag = sc->sc_cdmatag;
/* Enable the over-temperature and power-fail intrrupts. */
rid = 0;
mr = SYSIO_READ8(sc, SBR_THERM_INT_MAP);
vec = INTVEC(mr);
if ((sc->sc_ot_ires = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, vec,
vec, 1, RF_ACTIVE)) == NULL)
panic("sbus_probe: failed to get temperature interrupt");
bus_setup_intr(dev, sc->sc_ot_ires, INTR_TYPE_MISC | INTR_FAST,
sbus_overtemp, sc, &sc->sc_ot_ihand);
SYSIO_WRITE8(sc, SBR_THERM_INT_MAP, INTMAP_ENABLE(mr, PCPU_GET(mid)));
rid = 0;
mr = SYSIO_READ8(sc, SBR_POWER_INT_MAP);
vec = INTVEC(mr);
if ((sc->sc_pf_ires = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, vec,
vec, 1, RF_ACTIVE)) == NULL)
panic("sbus_probe: failed to get power fail interrupt");
bus_setup_intr(dev, sc->sc_pf_ires, INTR_TYPE_MISC | INTR_FAST,
sbus_pwrfail, sc, &sc->sc_pf_ihand);
SYSIO_WRITE8(sc, SBR_POWER_INT_MAP, INTMAP_ENABLE(mr, PCPU_GET(mid)));
/* Initialize the counter-timer. */
sparc64_counter_init(sc->sc_bustag, sc->sc_bushandle, SBR_TC0);
/*
* Loop through ROM children, fixing any relative addresses
* and then configuring each device.
* `specials' is an array of device names that are treated
* specially:
*/
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
if ((OF_getprop_alloc(child, "name", 1, (void **)&cname)) == -1)
continue;
if ((sdi = sbus_setup_dinfo(sc, child, cname)) == NULL) {
device_printf(dev, "<%s>: incomplete\n", cname);
free(cname, M_OFWPROP);
continue;
}
if ((cdev = device_add_child(dev, NULL, -1)) == NULL)
panic("sbus_probe: device_add_child failed");
device_set_ivars(cdev, sdi);
}
return (0);
}
static struct sbus_devinfo *
sbus_setup_dinfo(struct sbus_softc *sc, phandle_t node, char *name)
{
struct sbus_devinfo *sdi;
struct sbus_regs *reg;
u_int32_t base, iv, *intr;
int i, nreg, nintr, slot, rslot;
sdi = malloc(sizeof(*sdi), M_DEVBUF, M_ZERO | M_WAITOK);
if (sdi == NULL)
return (NULL);
resource_list_init(&sdi->sdi_rl);
sdi->sdi_name = name;
sdi->sdi_node = node;
OF_getprop_alloc(node, "compat", 1, (void **)&sdi->sdi_compat);
OF_getprop_alloc(node, "device_type", 1, (void **)&sdi->sdi_type);
slot = -1;
nreg = OF_getprop_alloc(node, "reg", sizeof(*reg), (void **)&reg);
if (nreg == -1) {
if (sdi->sdi_type == NULL ||
strcmp(sdi->sdi_type, "hierarchical") != 0) {
sbus_destroy_dinfo(sdi);
return (NULL);
}
} else {
for (i = 0; i < nreg; i++) {
base = reg[i].sbr_offset;
if (SBUS_ABS(base)) {
rslot = SBUS_ABS_TO_SLOT(base);
base = SBUS_ABS_TO_OFFSET(base);
} else
rslot = reg[i].sbr_slot;
if (slot != -1 && slot != rslot)
panic("sbus_setup_dinfo: multiple slots");
slot = rslot;
resource_list_add(&sdi->sdi_rl, SYS_RES_MEMORY, i,
base, base + reg[i].sbr_size, reg[i].sbr_size);
}
free(reg, M_OFWPROP);
}
sdi->sdi_slot = slot;
/*
* The `interrupts' property contains the Sbus interrupt level.
*/
nintr = OF_getprop_alloc(node, "interrupts", sizeof(*intr), (void **)&intr);
if (nintr != -1) {
for (i = 0; i < nintr; i++) {
iv = intr[i];
/*
* Sbus card devices need the slot number encoded into
* the vector as this is generally not done.
*/
if ((iv & INTMAP_OBIO_MASK) == 0)
iv |= slot << 3;
/* Set the ign as appropriate. */
iv |= sc->sc_ign;
resource_list_add(&sdi->sdi_rl, SYS_RES_IRQ, i,
iv, iv, 1);
}
free(intr, M_OFWPROP);
}
if (OF_getprop(node, "burst-sizes", &sdi->sdi_burstsz,
sizeof(sdi->sdi_burstsz)) == -1)
sdi->sdi_burstsz = sc->sc_burst;
else
sdi->sdi_burstsz &= sc->sc_burst;
return (sdi);
}
/* Free everything except sdi_name, which is handled separately. */
static void
sbus_destroy_dinfo(struct sbus_devinfo *dinfo)
{
resource_list_free(&dinfo->sdi_rl);
if (dinfo->sdi_compat != NULL)
free(dinfo->sdi_compat, M_OFWPROP);
if (dinfo->sdi_type != NULL)
free(dinfo->sdi_type, M_OFWPROP);
free(dinfo, M_DEVBUF);
}
static int
sbus_print_child(device_t dev, device_t child)
{
struct sbus_devinfo *dinfo;
struct resource_list *rl;
int rv;
dinfo = device_get_ivars(child);
rl = &dinfo->sdi_rl;
rv = bus_print_child_header(dev, child);
rv += resource_list_print_type(rl, "mem", SYS_RES_MEMORY, "%#lx");
rv += resource_list_print_type(rl, "irq", SYS_RES_IRQ, "%ld");
rv += bus_print_child_footer(dev, child);
return (rv);
}
static void
sbus_probe_nomatch(device_t dev, device_t child)
{
char *name;
char *type;
if (BUS_READ_IVAR(dev, child, SBUS_IVAR_NAME,
(uintptr_t *)&name) != 0 ||
BUS_READ_IVAR(dev, child, SBUS_IVAR_DEVICE_TYPE,
(uintptr_t *)&type) != 0)
return;
if (type == NULL)
type = "(unknown)";
device_printf(dev, "<%s>, type %s (no driver attached)\n",
name, type);
}
static int
sbus_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct sbus_softc *sc = device_get_softc(dev);
struct sbus_devinfo *dinfo;
if ((dinfo = device_get_ivars(child)) == NULL)
return (ENOENT);
switch (which) {
case SBUS_IVAR_BURSTSZ:
*result = dinfo->sdi_burstsz;
break;
case SBUS_IVAR_CLOCKFREQ:
*result = sc->sc_clockfreq;
break;
case SBUS_IVAR_COMPAT:
*result = (uintptr_t)dinfo->sdi_compat;
break;
case SBUS_IVAR_NAME:
*result = (uintptr_t)dinfo->sdi_name;
break;
case SBUS_IVAR_NODE:
*result = dinfo->sdi_node;
break;
case SBUS_IVAR_SLOT:
*result = dinfo->sdi_slot;
break;
case SBUS_IVAR_DEVICE_TYPE:
*result = (uintptr_t)dinfo->sdi_type;
break;
default:
return (ENOENT);
}
return 0;
}
static struct resource_list *
sbus_get_resource_list(device_t dev, device_t child)
{
struct sbus_devinfo *sdi;
sdi = device_get_ivars(child);
return (&sdi->sdi_rl);
}
/* Write to the correct clr register, and call the actual handler. */
static void
sbus_intr_stub(void *arg)
{
struct sbus_clr *scl;
scl = (struct sbus_clr *)arg;
scl->scl_handler(scl->scl_arg);
SYSIO_WRITE8(scl->scl_sc, scl->scl_clr, 0);
}
static int
sbus_setup_intr(device_t dev, device_t child,
struct resource *ires, int flags, driver_intr_t *intr, void *arg,
void **cookiep)
{
struct sbus_softc *sc;
struct sbus_clr *scl;
bus_addr_t intrmapptr, intrclrptr, intrptr;
u_int64_t intrmap;
u_int32_t inr, slot;
int error, i;
long vec = rman_get_start(ires);
sc = (struct sbus_softc *)device_get_softc(dev);
scl = (struct sbus_clr *)malloc(sizeof(*scl), M_DEVBUF, M_NOWAIT);
if (scl == NULL)
return (NULL);
intrptr = intrmapptr = intrclrptr = 0;
intrmap = 0;
inr = INTVEC(vec);
if ((inr & INTMAP_OBIO_MASK) == 0) {
/*
* We're in an SBUS slot, register the map and clear
* intr registers.
*/
slot = INTSLOT(vec);
intrmapptr = SBR_SLOT0_INT_MAP + slot * 8;
intrclrptr = SBR_SLOT0_INT_CLR +
(slot * 8 * 8) + (INTPRI(vec) * 8);
/* Enable the interrupt, insert IGN. */
intrmap = inr | sc->sc_ign;
} else {
intrptr = SBR_SCSI_INT_MAP;
/* Insert IGN */
inr |= sc->sc_ign;
for (i = 0; intrptr <= SBR_RESERVED_INT_MAP &&
INTVEC(intrmap = SYSIO_READ8(sc, intrptr)) !=
INTVEC(inr); intrptr += 8, i++)
;
if (INTVEC(intrmap) == INTVEC(inr)) {
/* Register the map and clear intr registers */
intrmapptr = intrptr;
intrclrptr = SBR_SCSI_INT_CLR + i * 8;
/* Enable the interrupt */
} else
panic("sbus_setup_intr: IRQ not found!");
}
scl->scl_sc = sc;
scl->scl_arg = arg;
scl->scl_handler = intr;
scl->scl_clr = intrclrptr;
/* Disable the interrupt while we fiddle with it */
SYSIO_WRITE8(sc, intrmapptr, intrmap);
error = BUS_SETUP_INTR(device_get_parent(dev), child, ires, flags,
sbus_intr_stub, scl, cookiep);
if (error != 0) {
free(scl, M_DEVBUF);
return (error);
}
scl->scl_cookie = *cookiep;
*cookiep = scl;
/*
* Clear the interrupt, it might have been triggered before it was
* set up.
*/
SYSIO_WRITE8(sc, intrclrptr, 0);
/*
* Enable the interrupt and program the target module now we have the
* handler installed.
*/
SYSIO_WRITE8(sc, intrmapptr, INTMAP_ENABLE(intrmap, PCPU_GET(mid)));
return (error);
}
static int
sbus_teardown_intr(device_t dev, device_t child,
struct resource *vec, void *cookie)
{
struct sbus_clr *scl;
int error;
scl = (struct sbus_clr *)cookie;
error = BUS_TEARDOWN_INTR(device_get_parent(dev), child, vec,
scl->scl_cookie);
/*
* Don't disable the interrupt for now, so that stray interupts get
* detected...
*/
if (error != 0)
free(scl, M_DEVBUF);
return (error);
}
/*
* There is no need to handle pass-throughs here; there are no bridges to
* SBuses.
*/
static struct resource *
sbus_alloc_resource(device_t bus, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct sbus_softc *sc;
struct sbus_devinfo *sdi;
struct rman *rm;
struct resource *rv;
struct resource_list *rl;
struct resource_list_entry *rle;
bus_space_handle_t bh;
bus_addr_t toffs;
bus_size_t tend;
int i;
int isdefault = (start == 0UL && end == ~0UL);
int needactivate = flags & RF_ACTIVE;
sc = (struct sbus_softc *)device_get_softc(bus);
sdi = device_get_ivars(child);
rl = &sdi->sdi_rl;
rle = resource_list_find(rl, type, *rid);
if (rle == NULL)
return (NULL);
if (rle->res != NULL)
panic("sbus_alloc_resource: resource entry is busy");
if (isdefault) {
start = rle->start;
count = ulmax(count, rle->count);
end = ulmax(rle->end, start + count - 1);
}
switch (type) {
case SYS_RES_IRQ:
rv = BUS_ALLOC_RESOURCE(device_get_parent(bus), child, type,
rid, start, end, count, flags);
if (rv == NULL)
return (NULL);
break;
case SYS_RES_MEMORY:
rm = NULL;
bh = toffs = tend = 0;
for (i = 0; i < sc->sc_nrange; i++) {
if (sc->sc_rd[i].rd_slot != sdi->sdi_slot ||
start < sc->sc_rd[i].rd_coffset ||
start > sc->sc_rd[i].rd_cend)
continue;
/* Disallow cross-range allocations. */
if (end > sc->sc_rd[i].rd_cend)
return (NULL);
/* We've found the connection to the parent bus */
toffs = start - sc->sc_rd[i].rd_coffset;
tend = end - sc->sc_rd[i].rd_coffset;
rm = &sc->sc_rd[i].rd_rman;
bh = sc->sc_rd[i].rd_bushandle;
}
if (toffs == NULL)
return (NULL);
flags &= ~RF_ACTIVE;
rv = rman_reserve_resource(rm, toffs, tend, count, flags,
child);
if (rv == NULL)
return (NULL);
rman_set_bustag(rv, sc->sc_cbustag);
rman_set_bushandle(rv, bh + rman_get_start(rv));
if (needactivate) {
if (bus_activate_resource(child, type, *rid, rv)) {
rman_release_resource(rv);
return (NULL);
}
}
break;
default:
return (NULL);
}
rle->res = rv;
return (rv);
}
static int
sbus_activate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
if (type == SYS_RES_IRQ) {
return (BUS_ACTIVATE_RESOURCE(device_get_parent(bus),
child, type, rid, r));
}
return (rman_activate_resource(r));
}
static int
sbus_deactivate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
if (type == SYS_RES_IRQ) {
return (BUS_DEACTIVATE_RESOURCE(device_get_parent(bus),
child, type, rid, r));
}
return (rman_deactivate_resource(r));
}
static int
sbus_release_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
struct sbus_devinfo *sdi;
struct resource_list_entry *rle;
int error = 0;
if (type == SYS_RES_IRQ)
error = BUS_RELEASE_RESOURCE(device_get_parent(bus), child,
type, rid, r);
else {
if ((rman_get_flags(r) & RF_ACTIVE) != 0)
error = bus_deactivate_resource(child, type, rid, r);
if (error != 0)
return (error);
error = rman_release_resource(r);
}
if (error != 0)
return (error);
sdi = device_get_ivars(child);
rle = resource_list_find(&sdi->sdi_rl, type, rid);
if (rle == NULL)
panic("sbus_release_resource: can't find resource");
if (rle->res == NULL)
panic("sbus_release_resource: resource entry is not busy");
rle->res = NULL;
return (0);
}
/*
* Handle an overtemp situation.
*
* SPARCs have temperature sensors which generate interrupts
* if the machine's temperature exceeds a certain threshold.
* This handles the interrupt and powers off the machine.
* The same needs to be done to PCI controller drivers.
*/
static void
sbus_overtemp(void *arg)
{
printf("DANGER: OVER TEMPERATURE detected\nShutting down NOW.\n");
shutdown_nice(RB_POWEROFF);
}
/* Try to shut down in time in case of power failure. */
static void
sbus_pwrfail(void *arg)
{
printf("Power failure detected\nShutting down NOW.\n");
shutdown_nice(0);
}
static bus_space_tag_t
sbus_alloc_bustag(struct sbus_softc *sc)
{
bus_space_tag_t sbt;
sbt = (bus_space_tag_t)malloc(sizeof(struct bus_space_tag), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (sbt == NULL)
panic("sbus_alloc_bustag: out of memory");
bzero(sbt, sizeof *sbt);
sbt->bst_cookie = sc;
sbt->bst_parent = sc->sc_bustag;
sbt->bst_type = SBUS_BUS_SPACE;
return (sbt);
}