freebsd-dev/sys/dev/fb/tga.h
obrien b0240e2484 Add the TGA video driver. This is a great accomplishtment and will help
us a lot on older Alphas.
Andrew Gallatin, Thomas V. Crimi, and Peter Jeremy contributed to this
work along with the submitter.

Submitted by:	 Andrew M. Miklic <miklic@home.com>
2001-11-01 08:26:30 +00:00

156 lines
5.1 KiB
C

/*
* Copyright (c) 1995, 1996 Carnegie-Mellon University.
* All rights reserved.
*
* Author: Chris G. Demetriou
*
* Permission to use, copy, modify and distribute this software and
* its documentation is hereby granted, provided that both the copyright
* notice and this permission notice appear in all copies of the
* software, derivative works or modified versions, and any portions
* thereof, and that both notices appear in supporting documentation.
*
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
*
* Carnegie Mellon requests users of this software to return to
*
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
* School of Computer Science
* Carnegie Mellon University
* Pittsburgh PA 15213-3890
*
* any improvements or extensions that they make and grant Carnegie the
* rights to redistribute these changes.
*
* Copyright (c) 2000 Andrew Miklic
*
* $FreeBSD$
*/
#ifndef _FB_TGA_H_
#define _FB_TGA_H_
/* TGA-specific FB stuff */
struct gfb_softc;
struct video_adapter;
/*
* Register definitions for the Brooktree Bt463 135MHz Monolithic
* CMOS TrueVu RAMDAC.
*/
/*
* Directly-accessible registers. Note the address register is
* auto-incrementing.
*/
#define BT463_REG_ADDR_LOW 0x00 /* C1,C0 == 0,0 */
#define BT463_REG_ADDR_HIGH 0x01 /* C1,C0 == 0,1 */
#define BT463_REG_IREG_DATA 0x02 /* C1,C0 == 1,0 */
#define BT463_REG_CMAP_DATA 0x03 /* C1,C0 == 1,1 */
#define BT463_REG_MAX BT463_REG_CMAP_DATA
/*
* All internal register access to the Bt463 is done indirectly via the
* Address Register (mapped into the host bus in a device-specific
* fashion). The following register definitions are in terms of
* their address register address values.
*/
/* C1,C0 must be 1,0 */
#define BT463_IREG_CURSOR_COLOR_0 0x0100 /* 3 r/w cycles */
#define BT463_IREG_CURSOR_COLOR_1 0x0101 /* 3 r/w cycles */
#define BT463_IREG_ID 0x0200
#define BT463_IREG_COMMAND_0 0x0201
#define BT463_IREG_COMMAND_1 0x0202
#define BT463_IREG_COMMAND_2 0x0203
#define BT463_IREG_READ_MASK_P0_P7 0x0205
#define BT463_IREG_READ_MASK_P8_P15 0x0206
#define BT463_IREG_READ_MASK_P16_P23 0x0207
#define BT463_IREG_READ_MASK_P24_P27 0x0208
#define BT463_IREG_BLINK_MASK_P0_P7 0x0209
#define BT463_IREG_BLINK_MASK_P8_P15 0x020a
#define BT463_IREG_BLINK_MASK_P16_P23 0x020b
#define BT463_IREG_BLINK_MASK_P24_P27 0x020c
#define BT463_IREG_TEST 0x020d
#define BT463_IREG_INPUT_SIG 0x020e /* 2 of 3 r/w cycles */
#define BT463_IREG_OUTPUT_SIG 0x020f /* 3 r/w cycles */
#define BT463_IREG_REVISION 0x0220
#define BT463_IREG_WINDOW_TYPE_TABLE 0x0300 /* 3 r/w cycles */
#define BT463_NWTYPE_ENTRIES 0x10 /* 16 window type entries */
/* C1,C0 must be 1,1 */
#define BT463_IREG_CPALETTE_RAM 0x0000 /* 3 r/w cycles */
#define BT463_NCMAP_ENTRIES 0x210 /* 528 CMAP entries */
#define BT463_DATA_CURCMAP_CHANGED 0x01 /* cursor colormap changed */
#define BT463_DATA_CMAP_CHANGED 0x02 /* colormap changed */
#define BT463_DATA_WTYPE_CHANGED 0x04 /* window type table changed */
#define BT463_DATA_ALL_CHANGED 0x07
/*
* Register definitions for the Brooktree Bt485A 170MHz Monolithic
* CMOS True-Color RAMDAC.
*/
/*
* Directly-addressed registers.
*/
#define BT485_REG_PCRAM_WRADDR 0x00
#define BT485_REG_PALETTE 0x01
#define BT485_REG_PIXMASK 0x02
#define BT485_REG_PCRAM_RDADDR 0x03
#define BT485_REG_COC_WRADDR 0x04
#define BT485_REG_COCDATA 0x05
#define BT485_REG_COMMAND_0 0x06
#define BT485_REG_COC_RDADDR 0x07
#define BT485_REG_COMMAND_1 0x08
#define BT485_REG_COMMAND_2 0x09
#define BT485_REG_STATUS 0x0a
#define BT485_REG_EXTENDED BT485_REG_STATUS
#define BT485_REG_CURSOR_RAM 0x0b
#define BT485_REG_CURSOR_X_LOW 0x0c
#define BT485_REG_CURSOR_X_HIGH 0x0d
#define BT485_REG_CURSOR_Y_LOW 0x0e
#define BT485_REG_CURSOR_Y_HIGH 0x0f
#define BT485_REG_MAX 0x0f
#define BT485_IREG_STATUS 0x00
#define BT485_IREG_COMMAND_3 0x01
#define BT485_IREG_COMMAND_4 0x02
#define BT485_IREG_RSA 0x20
#define BT485_IREG_GSA 0x21
#define BT485_IREG_BSA 0x22
#define BT485_DATA_ENB_CHANGED 0x01 /* cursor enable changed */
#define BT485_DATA_CURCMAP_CHANGED 0x02 /* cursor colormap changed */
#define BT485_DATA_CURSHAPE_CHANGED 0x04 /* cursor size, image, mask changed */
#define BT485_DATA_CMAP_CHANGED 0x08 /* colormap changed */
#define BT485_DATA_ALL_CHANGED 0x0f
#define CURSOR_MAX_SIZE 64
#define TGA_DRIVER_NAME "tga"
#define TGA2_DRIVER_NAME "tga2"
#define BTWREG(sc, addr, val) \
sc->gfbc->ramdac_wr((sc), BT463_REG_ADDR_LOW, (addr) & 0xff); \
sc->gfbc->ramdac_wr((sc), BT463_REG_ADDR_HIGH, ((addr) >> 8) & 0xff);\
(sc)->gfbc->ramdac_wr((sc), BT463_REG_IREG_DATA, (val))
#define BTWNREG(sc, val) \
(sc)->gfbc->ramdac_wr((sc), BT463_REG_IREG_DATA, (val))
#define BTRREG(sc, addr) \
sc->gfbc->ramdac_wr((sc), BT463_REG_ADDR_LOW, (addr) & 0xff); \
sc->gfbc->ramdac_wr((sc), BT463_REG_ADDR_HIGH, ((addr) >> 8) & 0xff);\
(sc)->gfbc->ramdac_rd((sc), BT463_REG_IREG_DATA)
#define BTRNREG(sc) \
(sc)->gfbc->ramdac_rd((sc), BT463_REG_IREG_DATA)
#endif /* _FB_TGA_H_ */