freebsd-dev/sys/amd64/include/cpufunc.h
Stanislav Sedov e085f869d5 - Add cpuctl(4) pseudo-device driver to provide access to some low-level
features of CPUs like reading/writing machine-specific registers,
  retrieving cpuid data, and updating microcode.
- Add cpucontrol(8) utility, that provides userland access to
  the features of cpuctl(4).
- Add subsequent manpages.

The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX
is created for each cpu present in the systems. The pseudo-device minor
number corresponds to the cpu number in the system. The cpuctl(4) pseudo-
device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID
and UPDATE. The first pair alows the caller to read/write machine-specific
registers from the correspondent CPU. cpuid data could be retrieved using
the CPUID call, and microcode updates are applied via UPDATE.

The permissions are inforced based on the pseudo-device file permissions.
RDMSR/CPUID will be allowed when the caller has read access to the device
node, while WRMSR/UPDATE will be granted only when the node is opened
for writing. There're also a number of priv(9) checks.

The cpucontrol(8) utility is intened to provide userland access to
the cpuctl(4) device features. The utility also allows one to apply
cpu microcode updates.

Currently only Intel and AMD cpus are supported and were tested.

Approved by:	kib
Reviewed by:	rpaulo, cokane, Peter Jeremy
MFC after:	1 month
2008-08-08 16:26:53 +00:00

799 lines
16 KiB
C

/*-
* Copyright (c) 2003 Peter Wemm.
* Copyright (c) 1993 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Functions to provide access to special i386 instructions.
* This in included in sys/systm.h, and that file should be
* used in preference to this.
*/
#ifndef _MACHINE_CPUFUNC_H_
#define _MACHINE_CPUFUNC_H_
#ifndef _SYS_CDEFS_H_
#error this file needs sys/cdefs.h as a prerequisite
#endif
struct region_descriptor;
#define readb(va) (*(volatile u_int8_t *) (va))
#define readw(va) (*(volatile u_int16_t *) (va))
#define readl(va) (*(volatile u_int32_t *) (va))
#define readq(va) (*(volatile u_int64_t *) (va))
#define writeb(va, d) (*(volatile u_int8_t *) (va) = (d))
#define writew(va, d) (*(volatile u_int16_t *) (va) = (d))
#define writel(va, d) (*(volatile u_int32_t *) (va) = (d))
#define writeq(va, d) (*(volatile u_int64_t *) (va) = (d))
#if defined(__GNUCLIKE_ASM) && defined(__CC_SUPPORTS___INLINE)
static __inline void
breakpoint(void)
{
__asm __volatile("int $3");
}
static __inline u_int
bsfl(u_int mask)
{
u_int result;
__asm __volatile("bsfl %1,%0" : "=r" (result) : "rm" (mask));
return (result);
}
static __inline u_long
bsfq(u_long mask)
{
u_long result;
__asm __volatile("bsfq %1,%0" : "=r" (result) : "rm" (mask));
return (result);
}
static __inline u_int
bsrl(u_int mask)
{
u_int result;
__asm __volatile("bsrl %1,%0" : "=r" (result) : "rm" (mask));
return (result);
}
static __inline u_long
bsrq(u_long mask)
{
u_long result;
__asm __volatile("bsrq %1,%0" : "=r" (result) : "rm" (mask));
return (result);
}
static __inline void
disable_intr(void)
{
__asm __volatile("cli" : : : "memory");
}
static __inline void
do_cpuid(u_int ax, u_int *p)
{
__asm __volatile("cpuid"
: "=a" (p[0]), "=b" (p[1]), "=c" (p[2]), "=d" (p[3])
: "0" (ax));
}
static __inline void
cpuid_count(u_int ax, u_int cx, u_int *p)
{
__asm __volatile("cpuid"
: "=a" (p[0]), "=b" (p[1]), "=c" (p[2]), "=d" (p[3])
: "0" (ax), "c" (cx));
}
static __inline void
enable_intr(void)
{
__asm __volatile("sti");
}
#ifdef _KERNEL
#define HAVE_INLINE_FFS
#define ffs(x) __builtin_ffs(x)
#define HAVE_INLINE_FFSL
static __inline int
ffsl(long mask)
{
return (mask == 0 ? mask : (int)bsfq((u_long)mask) + 1);
}
#define HAVE_INLINE_FLS
static __inline int
fls(int mask)
{
return (mask == 0 ? mask : (int)bsrl((u_int)mask) + 1);
}
#define HAVE_INLINE_FLSL
static __inline int
flsl(long mask)
{
return (mask == 0 ? mask : (int)bsrq((u_long)mask) + 1);
}
#endif /* _KERNEL */
static __inline void
halt(void)
{
__asm __volatile("hlt");
}
#if !defined(__GNUCLIKE_BUILTIN_CONSTANT_P) || __GNUCLIKE_ASM < 3
#define inb(port) inbv(port)
#define outb(port, data) outbv(port, data)
#else /* __GNUCLIKE_BUILTIN_CONSTANT_P && __GNUCLIKE_ASM >= 3 */
/*
* The following complications are to get around gcc not having a
* constraint letter for the range 0..255. We still put "d" in the
* constraint because "i" isn't a valid constraint when the port
* isn't constant. This only matters for -O0 because otherwise
* the non-working version gets optimized away.
*
* Use an expression-statement instead of a conditional expression
* because gcc-2.6.0 would promote the operands of the conditional
* and produce poor code for "if ((inb(var) & const1) == const2)".
*
* The unnecessary test `(port) < 0x10000' is to generate a warning if
* the `port' has type u_short or smaller. Such types are pessimal.
* This actually only works for signed types. The range check is
* careful to avoid generating warnings.
*/
#define inb(port) __extension__ ({ \
u_char _data; \
if (__builtin_constant_p(port) && ((port) & 0xffff) < 0x100 \
&& (port) < 0x10000) \
_data = inbc(port); \
else \
_data = inbv(port); \
_data; })
#define outb(port, data) ( \
__builtin_constant_p(port) && ((port) & 0xffff) < 0x100 \
&& (port) < 0x10000 \
? outbc(port, data) : outbv(port, data))
static __inline u_char
inbc(u_int port)
{
u_char data;
__asm __volatile("inb %1,%0" : "=a" (data) : "id" ((u_short)(port)));
return (data);
}
static __inline void
outbc(u_int port, u_char data)
{
__asm __volatile("outb %0,%1" : : "a" (data), "id" ((u_short)(port)));
}
#endif /* __GNUCLIKE_BUILTIN_CONSTANT_P && __GNUCLIKE_ASM >= 3*/
static __inline u_char
inbv(u_int port)
{
u_char data;
/*
* We use %%dx and not %1 here because i/o is done at %dx and not at
* %edx, while gcc generates inferior code (movw instead of movl)
* if we tell it to load (u_short) port.
*/
__asm __volatile("inb %%dx,%0" : "=a" (data) : "d" (port));
return (data);
}
static __inline u_int
inl(u_int port)
{
u_int data;
__asm __volatile("inl %%dx,%0" : "=a" (data) : "d" (port));
return (data);
}
static __inline void
insb(u_int port, void *addr, size_t cnt)
{
__asm __volatile("cld; rep; insb"
: "+D" (addr), "+c" (cnt)
: "d" (port)
: "memory");
}
static __inline void
insw(u_int port, void *addr, size_t cnt)
{
__asm __volatile("cld; rep; insw"
: "+D" (addr), "+c" (cnt)
: "d" (port)
: "memory");
}
static __inline void
insl(u_int port, void *addr, size_t cnt)
{
__asm __volatile("cld; rep; insl"
: "+D" (addr), "+c" (cnt)
: "d" (port)
: "memory");
}
static __inline void
invd(void)
{
__asm __volatile("invd");
}
static __inline u_short
inw(u_int port)
{
u_short data;
__asm __volatile("inw %%dx,%0" : "=a" (data) : "d" (port));
return (data);
}
static __inline void
outbv(u_int port, u_char data)
{
u_char al;
/*
* Use an unnecessary assignment to help gcc's register allocator.
* This make a large difference for gcc-1.40 and a tiny difference
* for gcc-2.6.0. For gcc-1.40, al had to be ``asm("ax")'' for
* best results. gcc-2.6.0 can't handle this.
*/
al = data;
__asm __volatile("outb %0,%%dx" : : "a" (al), "d" (port));
}
static __inline void
outl(u_int port, u_int data)
{
/*
* outl() and outw() aren't used much so we haven't looked at
* possible micro-optimizations such as the unnecessary
* assignment for them.
*/
__asm __volatile("outl %0,%%dx" : : "a" (data), "d" (port));
}
static __inline void
outsb(u_int port, const void *addr, size_t cnt)
{
__asm __volatile("cld; rep; outsb"
: "+S" (addr), "+c" (cnt)
: "d" (port));
}
static __inline void
outsw(u_int port, const void *addr, size_t cnt)
{
__asm __volatile("cld; rep; outsw"
: "+S" (addr), "+c" (cnt)
: "d" (port));
}
static __inline void
outsl(u_int port, const void *addr, size_t cnt)
{
__asm __volatile("cld; rep; outsl"
: "+S" (addr), "+c" (cnt)
: "d" (port));
}
static __inline void
outw(u_int port, u_short data)
{
__asm __volatile("outw %0,%%dx" : : "a" (data), "d" (port));
}
static __inline void
ia32_pause(void)
{
__asm __volatile("pause");
}
static __inline u_long
read_rflags(void)
{
u_long rf;
__asm __volatile("pushfq; popq %0" : "=r" (rf));
return (rf);
}
static __inline u_int64_t
rdmsr(u_int msr)
{
u_int32_t low, high;
__asm __volatile("rdmsr" : "=a" (low), "=d" (high) : "c" (msr));
return (low | ((u_int64_t)high << 32));
}
static __inline u_int64_t
rdpmc(u_int pmc)
{
u_int32_t low, high;
__asm __volatile("rdpmc" : "=a" (low), "=d" (high) : "c" (pmc));
return (low | ((u_int64_t)high << 32));
}
static __inline u_int64_t
rdtsc(void)
{
u_int32_t low, high;
__asm __volatile("rdtsc" : "=a" (low), "=d" (high));
return (low | ((u_int64_t)high << 32));
}
static __inline void
wbinvd(void)
{
__asm __volatile("wbinvd");
}
static __inline void
write_rflags(u_long rf)
{
__asm __volatile("pushq %0; popfq" : : "r" (rf));
}
static __inline void
wrmsr(u_int msr, u_int64_t newval)
{
u_int32_t low, high;
low = newval;
high = newval >> 32;
__asm __volatile("wrmsr" : : "a" (low), "d" (high), "c" (msr));
}
static __inline void
load_cr0(u_long data)
{
__asm __volatile("movq %0,%%cr0" : : "r" (data));
}
static __inline u_long
rcr0(void)
{
u_long data;
__asm __volatile("movq %%cr0,%0" : "=r" (data));
return (data);
}
static __inline u_long
rcr2(void)
{
u_long data;
__asm __volatile("movq %%cr2,%0" : "=r" (data));
return (data);
}
static __inline void
load_cr3(u_long data)
{
__asm __volatile("movq %0,%%cr3" : : "r" (data) : "memory");
}
static __inline u_long
rcr3(void)
{
u_long data;
__asm __volatile("movq %%cr3,%0" : "=r" (data));
return (data);
}
static __inline void
load_cr4(u_long data)
{
__asm __volatile("movq %0,%%cr4" : : "r" (data));
}
static __inline u_long
rcr4(void)
{
u_long data;
__asm __volatile("movq %%cr4,%0" : "=r" (data));
return (data);
}
/*
* Global TLB flush (except for thise for pages marked PG_G)
*/
static __inline void
invltlb(void)
{
load_cr3(rcr3());
}
/*
* TLB flush for an individual page (even if it has PG_G).
* Only works on 486+ CPUs (i386 does not have PG_G).
*/
static __inline void
invlpg(u_long addr)
{
__asm __volatile("invlpg %0" : : "m" (*(char *)addr) : "memory");
}
static __inline u_int
rfs(void)
{
u_int sel;
__asm __volatile("movl %%fs,%0" : "=rm" (sel));
return (sel);
}
static __inline u_int
rgs(void)
{
u_int sel;
__asm __volatile("movl %%gs,%0" : "=rm" (sel));
return (sel);
}
static __inline u_int
rss(void)
{
u_int sel;
__asm __volatile("movl %%ss,%0" : "=rm" (sel));
return (sel);
}
static __inline void
load_ds(u_int sel)
{
__asm __volatile("movl %0,%%ds" : : "rm" (sel));
}
static __inline void
load_es(u_int sel)
{
__asm __volatile("movl %0,%%es" : : "rm" (sel));
}
static inline void
cpu_monitor(const void *addr, int extensions, int hints)
{
__asm __volatile("monitor;"
: :"a" (addr), "c" (extensions), "d"(hints));
}
static inline void
cpu_mwait(int extensions, int hints)
{
__asm __volatile("mwait;" : :"a" (hints), "c" (extensions));
}
#ifdef _KERNEL
/* This is defined in <machine/specialreg.h> but is too painful to get to */
#ifndef MSR_FSBASE
#define MSR_FSBASE 0xc0000100
#endif
static __inline void
load_fs(u_int sel)
{
register u_int32_t fsbase __asm("ecx");
/* Preserve the fsbase value across the selector load */
fsbase = MSR_FSBASE;
__asm __volatile("rdmsr; movl %0,%%fs; wrmsr"
: : "rm" (sel), "c" (fsbase) : "eax", "edx");
}
#ifndef MSR_GSBASE
#define MSR_GSBASE 0xc0000101
#endif
static __inline void
load_gs(u_int sel)
{
register u_int32_t gsbase __asm("ecx");
/*
* Preserve the gsbase value across the selector load.
* Note that we have to disable interrupts because the gsbase
* being trashed happens to be the kernel gsbase at the time.
*/
gsbase = MSR_GSBASE;
__asm __volatile("pushfq; cli; rdmsr; movl %0,%%gs; wrmsr; popfq"
: : "rm" (sel), "c" (gsbase) : "eax", "edx");
}
#else
/* Usable by userland */
static __inline void
load_fs(u_int sel)
{
__asm __volatile("movl %0,%%fs" : : "rm" (sel));
}
static __inline void
load_gs(u_int sel)
{
__asm __volatile("movl %0,%%gs" : : "rm" (sel));
}
#endif
static __inline void
lidt(struct region_descriptor *addr)
{
__asm __volatile("lidt (%0)" : : "r" (addr));
}
static __inline void
lldt(u_short sel)
{
__asm __volatile("lldt %0" : : "r" (sel));
}
static __inline void
ltr(u_short sel)
{
__asm __volatile("ltr %0" : : "r" (sel));
}
static __inline u_int64_t
rdr0(void)
{
u_int64_t data;
__asm __volatile("movq %%dr0,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr0(u_int64_t dr0)
{
__asm __volatile("movq %0,%%dr0" : : "r" (dr0));
}
static __inline u_int64_t
rdr1(void)
{
u_int64_t data;
__asm __volatile("movq %%dr1,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr1(u_int64_t dr1)
{
__asm __volatile("movq %0,%%dr1" : : "r" (dr1));
}
static __inline u_int64_t
rdr2(void)
{
u_int64_t data;
__asm __volatile("movq %%dr2,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr2(u_int64_t dr2)
{
__asm __volatile("movq %0,%%dr2" : : "r" (dr2));
}
static __inline u_int64_t
rdr3(void)
{
u_int64_t data;
__asm __volatile("movq %%dr3,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr3(u_int64_t dr3)
{
__asm __volatile("movq %0,%%dr3" : : "r" (dr3));
}
static __inline u_int64_t
rdr4(void)
{
u_int64_t data;
__asm __volatile("movq %%dr4,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr4(u_int64_t dr4)
{
__asm __volatile("movq %0,%%dr4" : : "r" (dr4));
}
static __inline u_int64_t
rdr5(void)
{
u_int64_t data;
__asm __volatile("movq %%dr5,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr5(u_int64_t dr5)
{
__asm __volatile("movq %0,%%dr5" : : "r" (dr5));
}
static __inline u_int64_t
rdr6(void)
{
u_int64_t data;
__asm __volatile("movq %%dr6,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr6(u_int64_t dr6)
{
__asm __volatile("movq %0,%%dr6" : : "r" (dr6));
}
static __inline u_int64_t
rdr7(void)
{
u_int64_t data;
__asm __volatile("movq %%dr7,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr7(u_int64_t dr7)
{
__asm __volatile("movq %0,%%dr7" : : "r" (dr7));
}
static __inline register_t
intr_disable(void)
{
register_t rflags;
rflags = read_rflags();
disable_intr();
return (rflags);
}
static __inline void
intr_restore(register_t rflags)
{
write_rflags(rflags);
}
#else /* !(__GNUCLIKE_ASM && __CC_SUPPORTS___INLINE) */
int breakpoint(void);
u_int bsfl(u_int mask);
u_int bsrl(u_int mask);
void disable_intr(void);
void do_cpuid(u_int ax, u_int *p);
void enable_intr(void);
void halt(void);
void ia32_pause(void);
u_char inb(u_int port);
u_int inl(u_int port);
void insb(u_int port, void *addr, size_t cnt);
void insl(u_int port, void *addr, size_t cnt);
void insw(u_int port, void *addr, size_t cnt);
register_t intr_disable(void);
void intr_restore(register_t rf);
void invd(void);
void invlpg(u_int addr);
void invltlb(void);
u_short inw(u_int port);
void lidt(struct region_descriptor *addr);
void lldt(u_short sel);
void load_cr0(u_long cr0);
void load_cr3(u_long cr3);
void load_cr4(u_long cr4);
void load_dr0(u_int64_t dr0);
void load_dr1(u_int64_t dr1);
void load_dr2(u_int64_t dr2);
void load_dr3(u_int64_t dr3);
void load_dr4(u_int64_t dr4);
void load_dr5(u_int64_t dr5);
void load_dr6(u_int64_t dr6);
void load_dr7(u_int64_t dr7);
void load_fs(u_int sel);
void load_gs(u_int sel);
void ltr(u_short sel);
void outb(u_int port, u_char data);
void outl(u_int port, u_int data);
void outsb(u_int port, const void *addr, size_t cnt);
void outsl(u_int port, const void *addr, size_t cnt);
void outsw(u_int port, const void *addr, size_t cnt);
void outw(u_int port, u_short data);
u_long rcr0(void);
u_long rcr2(void);
u_long rcr3(void);
u_long rcr4(void);
u_int64_t rdmsr(u_int msr);
u_int64_t rdpmc(u_int pmc);
u_int64_t rdr0(void);
u_int64_t rdr1(void);
u_int64_t rdr2(void);
u_int64_t rdr3(void);
u_int64_t rdr4(void);
u_int64_t rdr5(void);
u_int64_t rdr6(void);
u_int64_t rdr7(void);
u_int64_t rdtsc(void);
u_int read_rflags(void);
u_int rfs(void);
u_int rgs(void);
void wbinvd(void);
void write_rflags(u_int rf);
void wrmsr(u_int msr, u_int64_t newval);
#endif /* __GNUCLIKE_ASM && __CC_SUPPORTS___INLINE */
void reset_dbregs(void);
#ifdef _KERNEL
int rdmsr_safe(u_int msr, uint64_t *val);
int wrmsr_safe(u_int msr, uint64_t newval);
#endif
#endif /* !_MACHINE_CPUFUNC_H_ */