2559473944
arm, mips and sparc64 were affected.
1269 lines
32 KiB
C
1269 lines
32 KiB
C
/*-
|
|
* Copyright (c) 2016 Stanislav Galabov.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <sys/interrupt.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/endian.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#include <vm/vm_extern.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/cpu.h>
|
|
#include <machine/intr.h>
|
|
#include <machine/pmap.h>
|
|
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcireg.h>
|
|
|
|
#include <dev/pci/pcib_private.h>
|
|
|
|
#include <dev/fdt/fdt_common.h>
|
|
#include <dev/fdt/fdt_clock.h>
|
|
#include <dev/ofw/openfirm.h>
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
|
|
#include <mips/mediatek/mtk_pcie.h>
|
|
#include <mips/mediatek/mtk_soc.h>
|
|
#include <mips/mediatek/mtk_sysctl.h>
|
|
#include <mips/mediatek/fdt_reset.h>
|
|
|
|
#include "ofw_bus_if.h"
|
|
#include "pcib_if.h"
|
|
#include "pic_if.h"
|
|
|
|
/*
|
|
* Note: We only support PCIe at the moment.
|
|
* Most SoCs in the Ralink/Mediatek family that we target actually don't
|
|
* support PCI anyway, with the notable exceptions being RT3662/RT3883, which
|
|
* support both PCI and PCIe. If there exists a board based on one of them
|
|
* which is of interest in the future it shouldn't be too hard to enable PCI
|
|
* support for it.
|
|
*/
|
|
|
|
/* Chip specific function declarations */
|
|
static int mtk_pcie_phy_init(device_t);
|
|
static int mtk_pcie_phy_start(device_t);
|
|
static int mtk_pcie_phy_stop(device_t);
|
|
static int mtk_pcie_phy_mt7621_init(device_t);
|
|
static int mtk_pcie_phy_mt7628_init(device_t);
|
|
static int mtk_pcie_phy_mt7620_init(device_t);
|
|
static int mtk_pcie_phy_rt3883_init(device_t);
|
|
static void mtk_pcie_phy_setup_slots(device_t);
|
|
|
|
/* Generic declarations */
|
|
struct mtx mtk_pci_mtx;
|
|
MTX_SYSINIT(mtk_pci_mtx, &mtk_pci_mtx, "MTK PCIe mutex", MTX_SPIN);
|
|
|
|
static int mtk_pci_intr(void *);
|
|
|
|
static struct mtk_pci_softc *mt_sc = NULL;
|
|
|
|
struct mtk_pci_range {
|
|
u_long base;
|
|
u_long len;
|
|
};
|
|
|
|
#define FDT_RANGES_CELLS ((1 + 2 + 3) * 2)
|
|
|
|
static void
|
|
mtk_pci_range_dump(struct mtk_pci_range *range)
|
|
{
|
|
#ifdef DEBUG
|
|
printf("\n");
|
|
printf(" base = 0x%08lx\n", range->base);
|
|
printf(" len = 0x%08lx\n", range->len);
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
mtk_pci_ranges_decode(phandle_t node, struct mtk_pci_range *io_space,
|
|
struct mtk_pci_range *mem_space)
|
|
{
|
|
struct mtk_pci_range *pci_space;
|
|
pcell_t ranges[FDT_RANGES_CELLS];
|
|
pcell_t addr_cells, size_cells, par_addr_cells;
|
|
pcell_t *rangesptr;
|
|
pcell_t cell0, cell1, cell2;
|
|
int tuple_size, tuples, i, rv, len;
|
|
|
|
/*
|
|
* Retrieve 'ranges' property.
|
|
*/
|
|
if ((fdt_addrsize_cells(node, &addr_cells, &size_cells)) != 0)
|
|
return (EINVAL);
|
|
if (addr_cells != 3 || size_cells != 2)
|
|
return (ERANGE);
|
|
|
|
par_addr_cells = fdt_parent_addr_cells(node);
|
|
if (par_addr_cells != 1)
|
|
return (ERANGE);
|
|
|
|
len = OF_getproplen(node, "ranges");
|
|
if (len > sizeof(ranges))
|
|
return (ENOMEM);
|
|
|
|
if (OF_getprop(node, "ranges", ranges, sizeof(ranges)) <= 0)
|
|
return (EINVAL);
|
|
|
|
tuple_size = sizeof(pcell_t) * (addr_cells + par_addr_cells +
|
|
size_cells);
|
|
tuples = len / tuple_size;
|
|
|
|
/*
|
|
* Initialize the ranges so that we don't have to worry about
|
|
* having them all defined in the FDT. In particular, it is
|
|
* perfectly fine not to want I/O space on PCI busses.
|
|
*/
|
|
bzero(io_space, sizeof(*io_space));
|
|
bzero(mem_space, sizeof(*mem_space));
|
|
|
|
rangesptr = &ranges[0];
|
|
for (i = 0; i < tuples; i++) {
|
|
cell0 = fdt_data_get((void *)rangesptr, 1);
|
|
rangesptr++;
|
|
cell1 = fdt_data_get((void *)rangesptr, 1);
|
|
rangesptr++;
|
|
cell2 = fdt_data_get((void *)rangesptr, 1);
|
|
rangesptr++;
|
|
|
|
if (cell0 & 0x02000000) {
|
|
pci_space = mem_space;
|
|
} else if (cell0 & 0x01000000) {
|
|
pci_space = io_space;
|
|
} else {
|
|
rv = ERANGE;
|
|
goto out;
|
|
}
|
|
|
|
pci_space->base = fdt_data_get((void *)rangesptr,
|
|
par_addr_cells);
|
|
rangesptr += par_addr_cells;
|
|
|
|
pci_space->len = fdt_data_get((void *)rangesptr, size_cells);
|
|
rangesptr += size_cells;
|
|
}
|
|
|
|
rv = 0;
|
|
out:
|
|
return (rv);
|
|
}
|
|
|
|
static int
|
|
mtk_pci_ranges(phandle_t node, struct mtk_pci_range *io_space,
|
|
struct mtk_pci_range *mem_space)
|
|
{
|
|
int err;
|
|
|
|
if ((err = mtk_pci_ranges_decode(node, io_space, mem_space)) != 0) {
|
|
return (err);
|
|
}
|
|
|
|
mtk_pci_range_dump(io_space);
|
|
mtk_pci_range_dump(mem_space);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static struct ofw_compat_data compat_data[] = {
|
|
{ "ralink,rt3883-pci", MTK_SOC_RT3883 },
|
|
{ "mediatek,mt7620-pci", MTK_SOC_MT7620A },
|
|
{ "mediatek,mt7628-pci", MTK_SOC_MT7628 },
|
|
{ "mediatek,mt7621-pci", MTK_SOC_MT7621 },
|
|
{ NULL, MTK_SOC_UNKNOWN }
|
|
};
|
|
|
|
static int
|
|
mtk_pci_probe(device_t dev)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
|
|
if (!ofw_bus_status_okay(dev))
|
|
return (ENXIO);
|
|
|
|
sc->socid = ofw_bus_search_compatible(dev, compat_data)->ocd_data;
|
|
if (sc->socid == MTK_SOC_UNKNOWN)
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "MTK PCIe Controller");
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mtk_pci_attach(device_t dev)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
struct mtk_pci_range io_space, mem_space;
|
|
phandle_t node;
|
|
intptr_t xref;
|
|
int i, rid;
|
|
|
|
sc->sc_dev = dev;
|
|
mt_sc = sc;
|
|
sc->addr_mask = 0xffffffff;
|
|
|
|
/* Request our memory */
|
|
rid = 0;
|
|
sc->pci_res[0] = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->pci_res[0] == NULL) {
|
|
device_printf(dev, "could not allocate memory resource\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* See how many interrupts we need */
|
|
if (sc->socid == MTK_SOC_MT7621)
|
|
sc->sc_num_irq = 3;
|
|
else {
|
|
sc->sc_num_irq = 1;
|
|
sc->pci_res[2] = sc->pci_res[3] = NULL;
|
|
sc->pci_intrhand[1] = sc->pci_intrhand[2] = NULL;
|
|
}
|
|
|
|
/* Request our interrupts */
|
|
for (i = 1; i <= sc->sc_num_irq ; i++) {
|
|
rid = i - 1;
|
|
sc->pci_res[i] = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->pci_res[i] == NULL) {
|
|
device_printf(dev, "could not allocate interrupt "
|
|
"resource %d\n", rid);
|
|
goto cleanup_res;
|
|
}
|
|
}
|
|
|
|
/* Parse our PCI 'ranges' property */
|
|
node = ofw_bus_get_node(dev);
|
|
xref = OF_xref_from_node(node);
|
|
if (mtk_pci_ranges(node, &io_space, &mem_space)) {
|
|
device_printf(dev, "could not retrieve 'ranges' data\n");
|
|
goto cleanup_res;
|
|
}
|
|
|
|
/* Memory, I/O and IRQ resource limits */
|
|
sc->sc_io_base = io_space.base;
|
|
sc->sc_io_size = io_space.len;
|
|
sc->sc_mem_base = mem_space.base;
|
|
sc->sc_mem_size = mem_space.len;
|
|
sc->sc_irq_start = MTK_PCIE0_IRQ;
|
|
sc->sc_irq_end = MTK_PCIE2_IRQ;
|
|
|
|
/* Init resource managers for memory, I/O and IRQ */
|
|
sc->sc_mem_rman.rm_type = RMAN_ARRAY;
|
|
sc->sc_mem_rman.rm_descr = "mtk pcie memory window";
|
|
if (rman_init(&sc->sc_mem_rman) != 0 ||
|
|
rman_manage_region(&sc->sc_mem_rman, sc->sc_mem_base,
|
|
sc->sc_mem_base + sc->sc_mem_size - 1) != 0) {
|
|
device_printf(dev, "failed to setup memory rman\n");
|
|
goto cleanup_res;
|
|
}
|
|
|
|
sc->sc_io_rman.rm_type = RMAN_ARRAY;
|
|
sc->sc_io_rman.rm_descr = "mtk pcie io window";
|
|
if (rman_init(&sc->sc_io_rman) != 0 ||
|
|
rman_manage_region(&sc->sc_io_rman, sc->sc_io_base,
|
|
sc->sc_io_base + sc->sc_io_size - 1) != 0) {
|
|
device_printf(dev, "failed to setup io rman\n");
|
|
goto cleanup_res;
|
|
}
|
|
|
|
sc->sc_irq_rman.rm_type = RMAN_ARRAY;
|
|
sc->sc_irq_rman.rm_descr = "mtk pcie irqs";
|
|
if (rman_init(&sc->sc_irq_rman) != 0 ||
|
|
rman_manage_region(&sc->sc_irq_rman, sc->sc_irq_start,
|
|
sc->sc_irq_end) != 0) {
|
|
device_printf(dev, "failed to setup irq rman\n");
|
|
goto cleanup_res;
|
|
}
|
|
|
|
/* Do SoC-specific PCIe initialization */
|
|
if (mtk_pcie_phy_init(dev)) {
|
|
device_printf(dev, "pcie phy init failed\n");
|
|
goto cleanup_rman;
|
|
}
|
|
|
|
/* Register ourselves as an interrupt controller */
|
|
if (intr_pic_register(dev, xref) == NULL) {
|
|
device_printf(dev, "could not register PIC\n");
|
|
goto cleanup_rman;
|
|
}
|
|
|
|
/* Set up our interrupt handler */
|
|
for (i = 1; i <= sc->sc_num_irq; i++) {
|
|
sc->pci_intrhand[i - 1] = NULL;
|
|
if (bus_setup_intr(dev, sc->pci_res[i], INTR_TYPE_MISC,
|
|
mtk_pci_intr, NULL, sc, &sc->pci_intrhand[i - 1])) {
|
|
device_printf(dev, "could not setup intr handler %d\n",
|
|
i);
|
|
goto cleanup;
|
|
}
|
|
}
|
|
|
|
/* Attach our PCI child so bus enumeration can start */
|
|
if (device_add_child(dev, "pci", -1) == NULL) {
|
|
device_printf(dev, "could not attach pci bus\n");
|
|
goto cleanup;
|
|
}
|
|
|
|
/* And finally, attach ourselves to the bus */
|
|
if (bus_generic_attach(dev)) {
|
|
device_printf(dev, "could not attach to bus\n");
|
|
goto cleanup;
|
|
}
|
|
|
|
return (0);
|
|
|
|
cleanup:
|
|
#ifdef notyet
|
|
intr_pic_unregister(dev, xref);
|
|
#endif
|
|
for (i = 1; i <= sc->sc_num_irq; i++) {
|
|
if (sc->pci_intrhand[i - 1] != NULL)
|
|
bus_teardown_intr(dev, sc->pci_res[i],
|
|
sc->pci_intrhand[i - 1]);
|
|
}
|
|
cleanup_rman:
|
|
mtk_pcie_phy_stop(dev);
|
|
rman_fini(&sc->sc_irq_rman);
|
|
rman_fini(&sc->sc_io_rman);
|
|
rman_fini(&sc->sc_mem_rman);
|
|
cleanup_res:
|
|
mt_sc = NULL;
|
|
if (sc->pci_res[0] != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->pci_res[0]);
|
|
if (sc->pci_res[1] != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->pci_res[1]);
|
|
if (sc->pci_res[2] != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, 1, sc->pci_res[2]);
|
|
if (sc->pci_res[3] != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, 2, sc->pci_res[3]);
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
mtk_pci_read_ivar(device_t dev, device_t child, int which,
|
|
uintptr_t *result)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
|
|
switch (which) {
|
|
case PCIB_IVAR_DOMAIN:
|
|
*result = device_get_unit(dev);
|
|
return (0);
|
|
case PCIB_IVAR_BUS:
|
|
*result = sc->sc_busno;
|
|
return (0);
|
|
}
|
|
|
|
return (ENOENT);
|
|
}
|
|
|
|
static int
|
|
mtk_pci_write_ivar(device_t dev, device_t child, int which,
|
|
uintptr_t result)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
|
|
switch (which) {
|
|
case PCIB_IVAR_BUS:
|
|
sc->sc_busno = result;
|
|
return (0);
|
|
}
|
|
|
|
return (ENOENT);
|
|
}
|
|
|
|
static struct resource *
|
|
mtk_pci_alloc_resource(device_t bus, device_t child, int type, int *rid,
|
|
rman_res_t start, rman_res_t end, rman_res_t count, u_int flags)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(bus);
|
|
struct resource *rv;
|
|
struct rman *rm;
|
|
|
|
switch (type) {
|
|
case PCI_RES_BUS:
|
|
return pci_domain_alloc_bus(0, child, rid, start, end, count,
|
|
flags);
|
|
case SYS_RES_IRQ:
|
|
rm = &sc->sc_irq_rman;
|
|
break;
|
|
case SYS_RES_IOPORT:
|
|
rm = &sc->sc_io_rman;
|
|
break;
|
|
case SYS_RES_MEMORY:
|
|
rm = &sc->sc_mem_rman;
|
|
break;
|
|
default:
|
|
return (NULL);
|
|
}
|
|
|
|
rv = rman_reserve_resource(rm, start, end, count, flags, child);
|
|
|
|
if (rv == NULL)
|
|
return (NULL);
|
|
|
|
rman_set_rid(rv, *rid);
|
|
|
|
if ((flags & RF_ACTIVE) && type != SYS_RES_IRQ) {
|
|
if (bus_activate_resource(child, type, *rid, rv)) {
|
|
rman_release_resource(rv);
|
|
return (NULL);
|
|
}
|
|
}
|
|
|
|
return (rv);
|
|
}
|
|
|
|
static int
|
|
mtk_pci_release_resource(device_t bus, device_t child, int type, int rid,
|
|
struct resource *res)
|
|
{
|
|
|
|
if (type == PCI_RES_BUS)
|
|
return (pci_domain_release_bus(0, child, rid, res));
|
|
|
|
return (bus_generic_release_resource(bus, child, type, rid, res));
|
|
}
|
|
|
|
static int
|
|
mtk_pci_adjust_resource(device_t bus, device_t child, int type,
|
|
struct resource *res, rman_res_t start, rman_res_t end)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(bus);
|
|
struct rman *rm;
|
|
|
|
switch (type) {
|
|
case PCI_RES_BUS:
|
|
return pci_domain_adjust_bus(0, child, res, start, end);
|
|
case SYS_RES_IRQ:
|
|
rm = &sc->sc_irq_rman;
|
|
break;
|
|
case SYS_RES_IOPORT:
|
|
rm = &sc->sc_io_rman;
|
|
break;
|
|
case SYS_RES_MEMORY:
|
|
rm = &sc->sc_mem_rman;
|
|
break;
|
|
default:
|
|
rm = NULL;
|
|
break;
|
|
}
|
|
|
|
if (rm != NULL)
|
|
return (rman_adjust_resource(res, start, end));
|
|
|
|
return (bus_generic_adjust_resource(bus, child, type, res, start, end));
|
|
}
|
|
|
|
static inline int
|
|
mtk_idx_to_irq(int idx)
|
|
{
|
|
|
|
return ((idx == 0) ? MTK_PCIE0_IRQ :
|
|
(idx == 1) ? MTK_PCIE1_IRQ :
|
|
(idx == 2) ? MTK_PCIE2_IRQ : -1);
|
|
}
|
|
|
|
static inline int
|
|
mtk_irq_to_idx(int irq)
|
|
{
|
|
|
|
return ((irq == MTK_PCIE0_IRQ) ? 0 :
|
|
(irq == MTK_PCIE1_IRQ) ? 1 :
|
|
(irq == MTK_PCIE2_IRQ) ? 2 : -1);
|
|
}
|
|
|
|
static void
|
|
mtk_pci_mask_irq(void *source)
|
|
{
|
|
MT_WRITE32(mt_sc, MTK_PCI_PCIENA,
|
|
MT_READ32(mt_sc, MTK_PCI_PCIENA) & ~(1<<((int)source)));
|
|
}
|
|
|
|
static void
|
|
mtk_pci_unmask_irq(void *source)
|
|
{
|
|
|
|
MT_WRITE32(mt_sc, MTK_PCI_PCIENA,
|
|
MT_READ32(mt_sc, MTK_PCI_PCIENA) | (1<<((int)source)));
|
|
}
|
|
|
|
static int
|
|
mtk_pci_setup_intr(device_t bus, device_t child, struct resource *ires,
|
|
int flags, driver_filter_t *filt, driver_intr_t *handler,
|
|
void *arg, void **cookiep)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(bus);
|
|
struct intr_event *event;
|
|
int irq, error, irqidx;
|
|
|
|
irq = rman_get_start(ires);
|
|
|
|
if (irq < sc->sc_irq_start || irq > sc->sc_irq_end)
|
|
return (EINVAL);
|
|
|
|
irqidx = irq - sc->sc_irq_start;
|
|
|
|
event = sc->sc_eventstab[irqidx];
|
|
if (event == NULL) {
|
|
error = intr_event_create(&event, (void *)irq, 0, irq,
|
|
mtk_pci_mask_irq, mtk_pci_unmask_irq, NULL, NULL,
|
|
"pci intr%d:", irq);
|
|
|
|
if (error == 0) {
|
|
sc->sc_eventstab[irqidx] = event;
|
|
}
|
|
else {
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
intr_event_add_handler(event, device_get_nameunit(child), filt,
|
|
handler, arg, intr_priority(flags), flags, cookiep);
|
|
|
|
mtk_pci_unmask_irq((void*)irq);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mtk_pci_teardown_intr(device_t dev, device_t child, struct resource *ires,
|
|
void *cookie)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
int irq, result, irqidx;
|
|
|
|
irq = rman_get_start(ires);
|
|
if (irq < sc->sc_irq_start || irq > sc->sc_irq_end)
|
|
return (EINVAL);
|
|
|
|
irqidx = irq - sc->sc_irq_start;
|
|
if (sc->sc_eventstab[irqidx] == NULL)
|
|
panic("Trying to teardown unoccupied IRQ");
|
|
|
|
mtk_pci_mask_irq((void*)irq);
|
|
|
|
result = intr_event_remove_handler(cookie);
|
|
if (!result)
|
|
sc->sc_eventstab[irqidx] = NULL;
|
|
|
|
|
|
return (result);
|
|
}
|
|
|
|
static inline uint32_t
|
|
mtk_pci_make_addr(int bus, int slot, int func, int reg)
|
|
{
|
|
uint32_t addr;
|
|
|
|
addr = ((((reg & 0xf00) >> 8) << 24) | (bus << 16) | (slot << 11) |
|
|
(func << 8) | (reg & 0xfc) | (1 << 31));
|
|
|
|
return (addr);
|
|
}
|
|
|
|
static int
|
|
mtk_pci_maxslots(device_t dev)
|
|
{
|
|
|
|
return (PCI_SLOTMAX);
|
|
}
|
|
|
|
static inline int
|
|
mtk_pci_slot_has_link(device_t dev, int slot)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
|
|
return !!(sc->pcie_link_status & (1<<slot));
|
|
}
|
|
|
|
static uint32_t
|
|
mtk_pci_read_config(device_t dev, u_int bus, u_int slot, u_int func,
|
|
u_int reg, int bytes)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
uint32_t addr = 0, data = 0;
|
|
|
|
/* Return ~0U if slot has no link */
|
|
if (bus == 0 && mtk_pci_slot_has_link(dev, slot) == 0) {
|
|
return (~0U);
|
|
}
|
|
|
|
mtx_lock_spin(&mtk_pci_mtx);
|
|
addr = mtk_pci_make_addr(bus, slot, func, (reg & ~3)) & sc->addr_mask;
|
|
MT_WRITE32(sc, MTK_PCI_CFGADDR, addr);
|
|
switch (bytes % 4) {
|
|
case 0:
|
|
data = MT_READ32(sc, MTK_PCI_CFGDATA);
|
|
break;
|
|
case 1:
|
|
data = MT_READ8(sc, MTK_PCI_CFGDATA + (reg & 0x3));
|
|
break;
|
|
case 2:
|
|
data = MT_READ16(sc, MTK_PCI_CFGDATA + (reg & 0x3));
|
|
break;
|
|
default:
|
|
panic("%s(): Wrong number of bytes (%d) requested!\n",
|
|
__FUNCTION__, bytes % 4);
|
|
}
|
|
mtx_unlock_spin(&mtk_pci_mtx);
|
|
|
|
return (data);
|
|
}
|
|
|
|
static void
|
|
mtk_pci_write_config(device_t dev, u_int bus, u_int slot, u_int func,
|
|
u_int reg, uint32_t val, int bytes)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
uint32_t addr = 0, data = val;
|
|
|
|
/* Do not write if slot has no link */
|
|
if (bus == 0 && mtk_pci_slot_has_link(dev, slot) == 0)
|
|
return;
|
|
|
|
mtx_lock_spin(&mtk_pci_mtx);
|
|
addr = mtk_pci_make_addr(bus, slot, func, (reg & ~3)) & sc->addr_mask;
|
|
MT_WRITE32(sc, MTK_PCI_CFGADDR, addr);
|
|
switch (bytes % 4) {
|
|
case 0:
|
|
MT_WRITE32(sc, MTK_PCI_CFGDATA, data);
|
|
break;
|
|
case 1:
|
|
MT_WRITE8(sc, MTK_PCI_CFGDATA + (reg & 0x3), data);
|
|
break;
|
|
case 2:
|
|
MT_WRITE16(sc, MTK_PCI_CFGDATA + (reg & 0x3), data);
|
|
break;
|
|
default:
|
|
panic("%s(): Wrong number of bytes (%d) requested!\n",
|
|
__FUNCTION__, bytes % 4);
|
|
}
|
|
mtx_unlock_spin(&mtk_pci_mtx);
|
|
}
|
|
|
|
static int
|
|
mtk_pci_route_interrupt(device_t pcib, device_t device, int pin)
|
|
{
|
|
int bus, sl, dev;
|
|
|
|
bus = pci_get_bus(device);
|
|
sl = pci_get_slot(device);
|
|
dev = pci_get_device(device);
|
|
|
|
if (bus != 0)
|
|
panic("Unexpected bus number %d\n", bus);
|
|
|
|
/* PCIe only */
|
|
switch (sl) {
|
|
case 0: return MTK_PCIE0_IRQ;
|
|
case 1: return MTK_PCIE0_IRQ + 1;
|
|
case 2: return MTK_PCIE0_IRQ + 2;
|
|
default: return (-1);
|
|
}
|
|
|
|
return (-1);
|
|
}
|
|
|
|
static device_method_t mtk_pci_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, mtk_pci_probe),
|
|
DEVMETHOD(device_attach, mtk_pci_attach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, bus_generic_resume),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_read_ivar, mtk_pci_read_ivar),
|
|
DEVMETHOD(bus_write_ivar, mtk_pci_write_ivar),
|
|
DEVMETHOD(bus_alloc_resource, mtk_pci_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, mtk_pci_release_resource),
|
|
DEVMETHOD(bus_adjust_resource, mtk_pci_adjust_resource),
|
|
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
|
|
DEVMETHOD(bus_setup_intr, mtk_pci_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, mtk_pci_teardown_intr),
|
|
|
|
/* pcib interface */
|
|
DEVMETHOD(pcib_maxslots, mtk_pci_maxslots),
|
|
DEVMETHOD(pcib_read_config, mtk_pci_read_config),
|
|
DEVMETHOD(pcib_write_config, mtk_pci_write_config),
|
|
DEVMETHOD(pcib_route_interrupt, mtk_pci_route_interrupt),
|
|
DEVMETHOD(pcib_request_feature, pcib_request_feature_allow),
|
|
|
|
/* OFW bus interface */
|
|
DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat),
|
|
DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model),
|
|
DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name),
|
|
DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node),
|
|
DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t mtk_pci_driver = {
|
|
"pcib",
|
|
mtk_pci_methods,
|
|
sizeof(struct mtk_pci_softc),
|
|
};
|
|
|
|
static devclass_t mtk_pci_devclass;
|
|
|
|
DRIVER_MODULE(mtk_pci, simplebus, mtk_pci_driver, mtk_pci_devclass, 0, 0);
|
|
|
|
/* Our interrupt handler */
|
|
static int
|
|
mtk_pci_intr(void *arg)
|
|
{
|
|
struct mtk_pci_softc *sc = arg;
|
|
struct intr_event *event;
|
|
uint32_t reg, irq, irqidx;
|
|
|
|
reg = MT_READ32(sc, MTK_PCI_PCIINT);
|
|
|
|
for (irq = sc->sc_irq_start; irq <= sc->sc_irq_end; irq++) {
|
|
if (reg & (1u<<irq)) {
|
|
irqidx = irq - sc->sc_irq_start;
|
|
event = sc->sc_eventstab[irqidx];
|
|
if (!event || CK_SLIST_EMPTY(&event->ie_handlers)) {
|
|
if (irq != 0)
|
|
printf("Stray PCI IRQ %d\n", irq);
|
|
continue;
|
|
}
|
|
|
|
intr_event_handle(event, NULL);
|
|
}
|
|
}
|
|
|
|
return (FILTER_HANDLED);
|
|
}
|
|
|
|
/* PCIe SoC-specific initialization */
|
|
static int
|
|
mtk_pcie_phy_init(device_t dev)
|
|
{
|
|
struct mtk_pci_softc *sc;
|
|
|
|
/* Get our softc */
|
|
sc = device_get_softc(dev);
|
|
|
|
/* We don't know how many slots we have yet */
|
|
sc->num_slots = 0;
|
|
|
|
/* Handle SoC specific PCIe init */
|
|
switch (sc->socid) {
|
|
case MTK_SOC_MT7628: /* Fallthrough */
|
|
case MTK_SOC_MT7688:
|
|
if (mtk_pcie_phy_mt7628_init(dev))
|
|
return (ENXIO);
|
|
break;
|
|
case MTK_SOC_MT7621:
|
|
if (mtk_pcie_phy_mt7621_init(dev))
|
|
return (ENXIO);
|
|
break;
|
|
case MTK_SOC_MT7620A:
|
|
if (mtk_pcie_phy_mt7620_init(dev))
|
|
return (ENXIO);
|
|
break;
|
|
case MTK_SOC_RT3662: /* Fallthrough */
|
|
case MTK_SOC_RT3883:
|
|
if (mtk_pcie_phy_rt3883_init(dev))
|
|
return (ENXIO);
|
|
break;
|
|
default:
|
|
device_printf(dev, "unsupported device %x\n", sc->socid);
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* If we were successful so far go and set up the PCIe slots, so we
|
|
* may allocate mem/io/irq resources and enumerate busses later.
|
|
*/
|
|
mtk_pcie_phy_setup_slots(dev);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mtk_pcie_phy_start(device_t dev)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
|
|
if (sc->socid == MTK_SOC_MT7621 &&
|
|
(mtk_sysctl_get(SYSCTL_REVID) & SYSCTL_REVID_MASK) !=
|
|
SYSCTL_MT7621_REV_E) {
|
|
if (fdt_reset_assert_all(dev))
|
|
return (ENXIO);
|
|
} else {
|
|
if (fdt_reset_deassert_all(dev))
|
|
return (ENXIO);
|
|
}
|
|
|
|
if (fdt_clock_enable_all(dev))
|
|
return (ENXIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mtk_pcie_phy_stop(device_t dev)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
|
|
if (sc->socid == MTK_SOC_MT7621 &&
|
|
(mtk_sysctl_get(SYSCTL_REVID) & SYSCTL_REVID_MASK) !=
|
|
SYSCTL_MT7621_REV_E) {
|
|
if (fdt_reset_deassert_all(dev))
|
|
return (ENXIO);
|
|
} else {
|
|
if (fdt_reset_assert_all(dev))
|
|
return (ENXIO);
|
|
}
|
|
|
|
if (fdt_clock_disable_all(dev))
|
|
return (ENXIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
#define mtk_pcie_phy_set(_sc, _reg, _s, _n, _v) \
|
|
MT_WRITE32((_sc), (_reg), ((MT_READ32((_sc), (_reg)) & \
|
|
(~(((1ull << (_n)) - 1) << (_s)))) | ((_v) << (_s))))
|
|
|
|
static void
|
|
mtk_pcie_phy_mt7621_bypass_pipe_rst(struct mtk_pci_softc *sc, uint32_t off)
|
|
{
|
|
|
|
mtk_pcie_phy_set(sc, off + 0x002c, 12, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x002c, 4, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x012c, 12, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x012c, 4, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x102c, 12, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x102c, 4, 1, 1);
|
|
}
|
|
|
|
static void
|
|
mtk_pcie_phy_mt7621_setup_ssc(struct mtk_pci_softc *sc, uint32_t off)
|
|
{
|
|
uint32_t xtal_sel;
|
|
|
|
xtal_sel = mtk_sysctl_get(SYSCTL_SYSCFG) >> 6;
|
|
xtal_sel &= 0x7;
|
|
|
|
mtk_pcie_phy_set(sc, off + 0x400, 8, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x400, 9, 2, 0);
|
|
mtk_pcie_phy_set(sc, off + 0x000, 4, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x100, 4, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x000, 5, 1, 0);
|
|
mtk_pcie_phy_set(sc, off + 0x100, 5, 1, 0);
|
|
|
|
if (xtal_sel <= 5 && xtal_sel >= 3) {
|
|
mtk_pcie_phy_set(sc, off + 0x490, 6, 2, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 0, 12, 0x1a);
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 16, 12, 0x1a);
|
|
} else {
|
|
mtk_pcie_phy_set(sc, off + 0x490, 6, 2, 0);
|
|
if (xtal_sel >= 6) {
|
|
mtk_pcie_phy_set(sc, off + 0x4bc, 4, 2, 0x01);
|
|
mtk_pcie_phy_set(sc, off + 0x49c, 0, 31, 0x18000000);
|
|
mtk_pcie_phy_set(sc, off + 0x4a4, 0, 16, 0x18d);
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 0, 12, 0x4a);
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 16, 12, 0x4a);
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 0, 12, 0x11);
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 16, 12, 0x11);
|
|
} else {
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 0, 12, 0x1a);
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 16, 12, 0x1a);
|
|
}
|
|
}
|
|
|
|
mtk_pcie_phy_set(sc, off + 0x4a0, 5, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x490, 22, 2, 2);
|
|
mtk_pcie_phy_set(sc, off + 0x490, 18, 4, 6);
|
|
mtk_pcie_phy_set(sc, off + 0x490, 12, 4, 2);
|
|
mtk_pcie_phy_set(sc, off + 0x490, 8, 4, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x4ac, 16, 3, 0);
|
|
mtk_pcie_phy_set(sc, off + 0x490, 1, 3, 2);
|
|
|
|
if (xtal_sel <= 5 && xtal_sel >= 3) {
|
|
mtk_pcie_phy_set(sc, off + 0x414, 6, 2, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x414, 5, 1, 1);
|
|
}
|
|
|
|
mtk_pcie_phy_set(sc, off + 0x414, 28, 2, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x040, 17, 4, 7);
|
|
mtk_pcie_phy_set(sc, off + 0x040, 16, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x140, 17, 4, 7);
|
|
mtk_pcie_phy_set(sc, off + 0x140, 16, 1, 1);
|
|
|
|
mtk_pcie_phy_set(sc, off + 0x000, 5, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x100, 5, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x000, 4, 1, 0);
|
|
mtk_pcie_phy_set(sc, off + 0x100, 4, 1, 0);
|
|
}
|
|
|
|
/* XXX: ugly, we need to fix this at some point */
|
|
#define MT7621_GPIO_CTRL0 *((volatile uint32_t *)0xbe000600)
|
|
#define MT7621_GPIO_DATA0 *((volatile uint32_t *)0xbe000620)
|
|
|
|
#define mtk_gpio_clr_set(_reg, _clr, _set) \
|
|
do { \
|
|
(_reg) = ((_reg) & (_clr)) | (_set); \
|
|
} while (0)
|
|
|
|
static int
|
|
mtk_pcie_phy_mt7621_init(device_t dev)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
|
|
/* First off, stop the PHY */
|
|
if (mtk_pcie_phy_stop(dev))
|
|
return (ENXIO);
|
|
|
|
/* PCIe resets are GPIO pins */
|
|
mtk_sysctl_clr_set(SYSCTL_GPIOMODE, MT7621_PERST_GPIO_MODE |
|
|
MT7621_UARTL3_GPIO_MODE, MT7621_PERST_GPIO | MT7621_UARTL3_GPIO);
|
|
|
|
/* Set GPIO pins as outputs */
|
|
mtk_gpio_clr_set(MT7621_GPIO_CTRL0, 0, MT7621_PCIE_RST);
|
|
|
|
/* Assert resets to PCIe devices */
|
|
mtk_gpio_clr_set(MT7621_GPIO_DATA0, MT7621_PCIE_RST, 0);
|
|
|
|
/* Give everything a chance to sink in */
|
|
DELAY(100000);
|
|
|
|
/* Now start the PHY again */
|
|
if (mtk_pcie_phy_start(dev))
|
|
return (ENXIO);
|
|
|
|
/* Wait for things to settle */
|
|
DELAY(100000);
|
|
|
|
/* Only apply below to REV-E hardware */
|
|
if ((mtk_sysctl_get(SYSCTL_REVID) & SYSCTL_REVID_MASK) ==
|
|
SYSCTL_MT7621_REV_E)
|
|
mtk_pcie_phy_mt7621_bypass_pipe_rst(sc, 0x9000);
|
|
|
|
/* Setup PCIe ports 0 and 1 */
|
|
mtk_pcie_phy_mt7621_setup_ssc(sc, 0x9000);
|
|
/* Setup PCIe port 2 */
|
|
mtk_pcie_phy_mt7621_setup_ssc(sc, 0xa000);
|
|
|
|
/* Deassert resets to PCIe devices */
|
|
mtk_gpio_clr_set(MT7621_GPIO_DATA0, 0, MT7621_PCIE_RST);
|
|
|
|
/* Set number of slots supported */
|
|
sc->num_slots = 3;
|
|
|
|
/* Give it a chance to sink in */
|
|
DELAY(100000);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
mtk_pcie_phy_mt7628_setup(struct mtk_pci_softc *sc, uint32_t off)
|
|
{
|
|
uint32_t xtal_sel;
|
|
|
|
xtal_sel = mtk_sysctl_get(SYSCTL_SYSCFG) >> 6;
|
|
xtal_sel &= 0x1;
|
|
|
|
mtk_pcie_phy_set(sc, off + 0x400, 8, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x400, 9, 2, 0);
|
|
mtk_pcie_phy_set(sc, off + 0x000, 4, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x000, 5, 1, 0);
|
|
mtk_pcie_phy_set(sc, off + 0x4ac, 16, 3, 3);
|
|
|
|
if (xtal_sel == 1) {
|
|
mtk_pcie_phy_set(sc, off + 0x4bc, 24, 8, 0x7d);
|
|
mtk_pcie_phy_set(sc, off + 0x490, 12, 4, 0x08);
|
|
mtk_pcie_phy_set(sc, off + 0x490, 6, 2, 0x01);
|
|
mtk_pcie_phy_set(sc, off + 0x4c0, 0, 32, 0x1f400000);
|
|
mtk_pcie_phy_set(sc, off + 0x4a4, 0, 16, 0x013d);
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 16, 16, 0x74);
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 0, 16, 0x74);
|
|
} else {
|
|
mtk_pcie_phy_set(sc, off + 0x4bc, 24, 8, 0x64);
|
|
mtk_pcie_phy_set(sc, off + 0x490, 12, 4, 0x0a);
|
|
mtk_pcie_phy_set(sc, off + 0x490, 6, 2, 0x00);
|
|
mtk_pcie_phy_set(sc, off + 0x4c0, 0, 32, 0x19000000);
|
|
mtk_pcie_phy_set(sc, off + 0x4a4, 0, 16, 0x018d);
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 16, 16, 0x4a);
|
|
mtk_pcie_phy_set(sc, off + 0x4a8, 0, 16, 0x4a);
|
|
}
|
|
|
|
mtk_pcie_phy_set(sc, off + 0x498, 0, 8, 5);
|
|
mtk_pcie_phy_set(sc, off + 0x000, 5, 1, 1);
|
|
mtk_pcie_phy_set(sc, off + 0x000, 4, 1, 0);
|
|
}
|
|
|
|
static int
|
|
mtk_pcie_phy_mt7628_init(device_t dev)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
|
|
/* Set PCIe reset to normal mode */
|
|
mtk_sysctl_clr_set(SYSCTL_GPIOMODE, MT7628_PERST_GPIO_MODE,
|
|
MT7628_PERST);
|
|
|
|
/* Start the PHY */
|
|
if (mtk_pcie_phy_start(dev))
|
|
return (ENXIO);
|
|
|
|
/* Give it a chance to sink in */
|
|
DELAY(100000);
|
|
|
|
/* Setup the PHY */
|
|
mtk_pcie_phy_mt7628_setup(sc, 0x9000);
|
|
|
|
/* Deassert PCIe device reset */
|
|
MT_CLR_SET32(sc, MTK_PCI_PCICFG, MTK_PCI_RESET, 0);
|
|
|
|
/* Set number of slots supported */
|
|
sc->num_slots = 1;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mtk_pcie_phy_mt7620_wait_busy(struct mtk_pci_softc *sc)
|
|
{
|
|
uint32_t reg_value, retry;
|
|
|
|
reg_value = retry = 0;
|
|
|
|
while (retry++ < MT7620_MAX_RETRIES) {
|
|
reg_value = MT_READ32(sc, MT7620_PCIE_PHY_CFG);
|
|
if (reg_value & PHY_BUSY)
|
|
DELAY(100000);
|
|
else
|
|
break;
|
|
}
|
|
|
|
if (retry >= MT7620_MAX_RETRIES)
|
|
return (ENXIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mtk_pcie_phy_mt7620_set(struct mtk_pci_softc *sc, uint32_t reg,
|
|
uint32_t val)
|
|
{
|
|
uint32_t reg_val;
|
|
|
|
if (mtk_pcie_phy_mt7620_wait_busy(sc))
|
|
return (ENXIO);
|
|
|
|
reg_val = PHY_MODE_WRITE | ((reg & 0xff) << PHY_ADDR_OFFSET) |
|
|
(val & 0xff);
|
|
MT_WRITE32(sc, MT7620_PCIE_PHY_CFG, reg_val);
|
|
DELAY(1000);
|
|
|
|
if (mtk_pcie_phy_mt7620_wait_busy(sc))
|
|
return (ENXIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mtk_pcie_phy_mt7620_init(device_t dev)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
|
|
/*
|
|
* The below sets the PCIe PHY to bypass the PCIe DLL and enables
|
|
* "elastic buffer control", whatever that may be...
|
|
*/
|
|
if (mtk_pcie_phy_mt7620_set(sc, 0x00, 0x80) ||
|
|
mtk_pcie_phy_mt7620_set(sc, 0x01, 0x04) ||
|
|
mtk_pcie_phy_mt7620_set(sc, 0x68, 0x84))
|
|
return (ENXIO);
|
|
|
|
/* Stop PCIe */
|
|
if (mtk_pcie_phy_stop(dev))
|
|
return (ENXIO);
|
|
|
|
/* Restore PPLL to a sane state before going on */
|
|
mtk_sysctl_clr_set(MT7620_PPLL_DRV, LC_CKDRVPD, PDRV_SW_SET);
|
|
|
|
/* No PCIe on the MT7620N */
|
|
if (!(mtk_sysctl_get(SYSCTL_REVID) & MT7620_PKG_BGA)) {
|
|
device_printf(dev, "PCIe disabled for MT7620N\n");
|
|
mtk_sysctl_clr_set(MT7620_PPLL_CFG0, 0, PPLL_SW_SET);
|
|
mtk_sysctl_clr_set(MT7620_PPLL_CFG1, 0, PPLL_PD);
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* PCIe device reset pin is in normal mode */
|
|
mtk_sysctl_clr_set(SYSCTL_GPIOMODE, MT7620_PERST_GPIO_MODE,
|
|
MT7620_PERST);
|
|
|
|
/* Enable PCIe now */
|
|
if (mtk_pcie_phy_start(dev))
|
|
return (ENXIO);
|
|
|
|
/* Give it a chance to sink in */
|
|
DELAY(100000);
|
|
|
|
/* If PLL is not locked - bail */
|
|
if (!(mtk_sysctl_get(MT7620_PPLL_CFG1) & PPLL_LOCKED)) {
|
|
device_printf(dev, "no PPLL not lock\n");
|
|
mtk_pcie_phy_stop(dev);
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* Configure PCIe PLL */
|
|
mtk_sysctl_clr_set(MT7620_PPLL_DRV, LC_CKDRVOHZ | LC_CKDRVHZ,
|
|
LC_CKDRVPD | PDRV_SW_SET);
|
|
|
|
/* and give it a chance to settle */
|
|
DELAY(100000);
|
|
|
|
/* Deassert PCIe device reset */
|
|
MT_CLR_SET32(sc, MTK_PCI_PCICFG, MTK_PCI_RESET, 0);
|
|
|
|
/* MT7620 supports one PCIe slot */
|
|
sc->num_slots = 1;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mtk_pcie_phy_rt3883_init(device_t dev)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
|
|
/* Enable PCI host mode and PCIe RC mode */
|
|
mtk_sysctl_clr_set(SYSCTL_SYSCFG1, 0, RT3883_PCI_HOST_MODE |
|
|
RT3883_PCIE_RC_MODE);
|
|
|
|
/* Enable PCIe PHY */
|
|
if (mtk_pcie_phy_start(dev))
|
|
return (ENXIO);
|
|
|
|
/* Disable PCI, we only support PCIe for now */
|
|
mtk_sysctl_clr_set(SYSCTL_RSTCTRL, 0, RT3883_PCI_RST);
|
|
mtk_sysctl_clr_set(SYSCTL_CLKCFG1, RT3883_PCI_CLK, 0);
|
|
|
|
/* Give things a chance to sink in */
|
|
DELAY(500000);
|
|
|
|
/* Set PCIe port number to 0 and lift PCIe reset */
|
|
MT_WRITE32(sc, MTK_PCI_PCICFG, 0);
|
|
|
|
/* Configure PCI Arbiter */
|
|
MT_WRITE32(sc, MTK_PCI_ARBCTL, 0x79);
|
|
|
|
/* We have a single PCIe slot */
|
|
sc->num_slots = 1;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
mtk_pcie_phy_setup_slots(device_t dev)
|
|
{
|
|
struct mtk_pci_softc *sc = device_get_softc(dev);
|
|
uint32_t bar0_val, val;
|
|
int i;
|
|
|
|
/* Disable all PCIe interrupts */
|
|
MT_WRITE32(sc, MTK_PCI_PCIENA, 0);
|
|
|
|
/* Default bar0_val is 64M, enabled */
|
|
bar0_val = 0x03FF0001;
|
|
|
|
/* But we override it to 2G, enabled for some SoCs */
|
|
if (sc->socid == MTK_SOC_MT7620A || sc->socid == MTK_SOC_MT7628 ||
|
|
sc->socid == MTK_SOC_MT7688 || sc->socid == MTK_SOC_MT7621)
|
|
bar0_val = 0x7FFF0001;
|
|
|
|
/* We still don't know which slots have linked up */
|
|
sc->pcie_link_status = 0;
|
|
|
|
/* XXX: I am not sure if this delay is really necessary */
|
|
DELAY(500000);
|
|
|
|
/*
|
|
* See which slots have links and mark them.
|
|
* Set up all slots' BARs and make them look like PCIe bridges.
|
|
*/
|
|
for (i = 0; i < sc->num_slots; i++) {
|
|
/* If slot has link - mark it */
|
|
if (MT_READ32(sc, MTK_PCIE_STATUS(i)) & 1)
|
|
sc->pcie_link_status |= (1<<i);
|
|
else
|
|
continue;
|
|
|
|
/* Generic slot configuration follows */
|
|
|
|
/* We enable BAR0 */
|
|
MT_WRITE32(sc, MTK_PCIE_BAR0SETUP(i), bar0_val);
|
|
/* and disable BAR1 */
|
|
MT_WRITE32(sc, MTK_PCIE_BAR1SETUP(i), 0);
|
|
/* Internal memory base has no offset */
|
|
MT_WRITE32(sc, MTK_PCIE_IMBASEBAR0(i), 0);
|
|
/* We're a PCIe bridge */
|
|
MT_WRITE32(sc, MTK_PCIE_CLASS(i), 0x06040001);
|
|
|
|
val = mtk_pci_read_config(dev, 0, i, 0, 0x4, 4);
|
|
mtk_pci_write_config(dev, 0, i, 0, 0x4, val | 0x4, 4);
|
|
val = mtk_pci_read_config(dev, 0, i, 0, 0x70c, 4);
|
|
val &= ~(0xff << 8);
|
|
val |= (0x50 << 8);
|
|
mtk_pci_write_config(dev, 0, i, 0, 0x70c, val, 4);
|
|
|
|
mtk_pci_write_config(dev, 0, i, 0, PCIR_IOBASEL_1, 0xff, 1);
|
|
mtk_pci_write_config(dev, 0, i, 0, PCIR_IOBASEH_1, 0xffff, 2);
|
|
mtk_pci_write_config(dev, 0, i, 0, PCIR_IOLIMITL_1, 0, 1);
|
|
mtk_pci_write_config(dev, 0, i, 0, PCIR_IOLIMITH_1, 0, 2);
|
|
mtk_pci_write_config(dev, 0, i, 0, PCIR_MEMBASE_1, 0xffff, 2);
|
|
mtk_pci_write_config(dev, 0, i, 0, PCIR_MEMLIMIT_1, 0, 2);
|
|
mtk_pci_write_config(dev, 0, i, 0, PCIR_PMBASEL_1, 0xffff, 2);
|
|
mtk_pci_write_config(dev, 0, i, 0, PCIR_PMBASEH_1, 0xffffffff,
|
|
4);
|
|
mtk_pci_write_config(dev, 0, i, 0, PCIR_PMLIMITL_1, 0, 2);
|
|
mtk_pci_write_config(dev, 0, i, 0, PCIR_PMLIMITH_1, 0, 4);
|
|
}
|
|
}
|