freebsd-dev/sys/arm/amlogic/aml8726/aml8726_usb_phy-m3.c
Oleksandr Tymoshenko c9fabc7afc Use OF_prop_free instead of direct call to free(9)
Reviewed by:	ganbold
2016-05-18 23:41:58 +00:00

429 lines
11 KiB
C

/*-
* Copyright 2014-2015 John Wehle <john@feith.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Amlogic aml8726-m3 USB physical layer driver.
*
* Both USB physical interfaces share the same configuration register.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/resource.h>
#include <sys/rman.h>
#include <sys/gpio.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <dev/fdt/fdt_common.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include "gpio_if.h"
struct aml8726_usb_phy_gpio {
device_t dev;
uint32_t pin;
uint32_t pol;
};
struct aml8726_usb_phy_softc {
device_t dev;
struct resource *res[1];
uint32_t npwr_en;
struct aml8726_usb_phy_gpio *pwr_en;
};
static struct resource_spec aml8726_usb_phy_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
{ -1, 0 }
};
#define AML_USB_PHY_CFG_REG 0
#define AML_USB_PHY_CFG_A_CLK_DETECTED (1U << 31)
#define AML_USB_PHY_CFG_CLK_DIV_MASK (0x7f << 24)
#define AML_USB_PHY_CFG_CLK_DIV_SHIFT 24
#define AML_USB_PHY_CFG_B_CLK_DETECTED (1 << 22)
#define AML_USB_PHY_CFG_A_PLL_RST (1 << 19)
#define AML_USB_PHY_CFG_A_PHYS_RST (1 << 18)
#define AML_USB_PHY_CFG_A_RST (1 << 17)
#define AML_USB_PHY_CFG_B_PLL_RST (1 << 13)
#define AML_USB_PHY_CFG_B_PHYS_RST (1 << 12)
#define AML_USB_PHY_CFG_B_RST (1 << 11)
#define AML_USB_PHY_CFG_CLK_EN (1 << 8)
#define AML_USB_PHY_CFG_CLK_SEL_MASK (7 << 5)
#define AML_USB_PHY_CFG_CLK_SEL_XTAL (0 << 5)
#define AML_USB_PHY_CFG_CLK_SEL_XTAL_DIV2 (1 << 5)
#define AML_USB_PHY_CFG_B_POR (1 << 1)
#define AML_USB_PHY_CFG_A_POR (1 << 0)
#define AML_USB_PHY_CFG_CLK_DETECTED \
(AML_USB_PHY_CFG_A_CLK_DETECTED | AML_USB_PHY_CFG_B_CLK_DETECTED)
#define AML_USB_PHY_MISC_A_REG 12
#define AML_USB_PHY_MISC_B_REG 16
#define AML_USB_PHY_MISC_ID_OVERIDE_EN (1 << 23)
#define AML_USB_PHY_MISC_ID_OVERIDE_DEVICE (1 << 22)
#define AML_USB_PHY_MISC_ID_OVERIDE_HOST (0 << 22)
#define CSR_WRITE_4(sc, reg, val) bus_write_4((sc)->res[0], reg, (val))
#define CSR_READ_4(sc, reg) bus_read_4((sc)->res[0], reg)
#define CSR_BARRIER(sc, reg) bus_barrier((sc)->res[0], reg, 4, \
(BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE))
#define PIN_ON_FLAG(pol) ((pol) == 0 ? \
GPIO_PIN_LOW : GPIO_PIN_HIGH)
#define PIN_OFF_FLAG(pol) ((pol) == 0 ? \
GPIO_PIN_HIGH : GPIO_PIN_LOW)
static int
aml8726_usb_phy_mode(const char *dwcotg_path, uint32_t *mode)
{
char *usb_mode;
phandle_t node;
ssize_t len;
if ((node = OF_finddevice(dwcotg_path)) == 0)
return (ENXIO);
if (fdt_is_compatible_strict(node, "synopsys,designware-hs-otg2") == 0)
return (ENXIO);
*mode = 0;
len = OF_getprop_alloc(node, "dr_mode",
sizeof(char), (void **)&usb_mode);
if (len <= 0)
return (0);
if (strcasecmp(usb_mode, "host") == 0) {
*mode = AML_USB_PHY_MISC_ID_OVERIDE_EN |
AML_USB_PHY_MISC_ID_OVERIDE_HOST;
} else if (strcasecmp(usb_mode, "peripheral") == 0) {
*mode = AML_USB_PHY_MISC_ID_OVERIDE_EN |
AML_USB_PHY_MISC_ID_OVERIDE_DEVICE;
}
OF_prop_free(usb_mode);
return (0);
}
static int
aml8726_usb_phy_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "amlogic,aml8726-m3-usb-phy"))
return (ENXIO);
device_set_desc(dev, "Amlogic aml8726-m3 USB PHY");
return (BUS_PROBE_DEFAULT);
}
static int
aml8726_usb_phy_attach(device_t dev)
{
struct aml8726_usb_phy_softc *sc = device_get_softc(dev);
int err;
int npwr_en;
pcell_t *prop;
phandle_t node;
ssize_t len;
uint32_t div;
uint32_t i;
uint32_t mode_a;
uint32_t mode_b;
uint32_t value;
sc->dev = dev;
if (aml8726_usb_phy_mode("/soc/usb@c9040000", &mode_a) != 0) {
device_printf(dev, "missing usb@c9040000 node in FDT\n");
return (ENXIO);
}
if (aml8726_usb_phy_mode("/soc/usb@c90c0000", &mode_b) != 0) {
device_printf(dev, "missing usb@c90c0000 node in FDT\n");
return (ENXIO);
}
if (bus_alloc_resources(dev, aml8726_usb_phy_spec, sc->res)) {
device_printf(dev, "can not allocate resources for device\n");
return (ENXIO);
}
node = ofw_bus_get_node(dev);
err = 0;
len = OF_getencprop_alloc(node, "usb-pwr-en",
3 * sizeof(pcell_t), (void **)&prop);
npwr_en = (len > 0) ? len : 0;
sc->npwr_en = 0;
sc->pwr_en = (struct aml8726_usb_phy_gpio *)
malloc(npwr_en * sizeof (*sc->pwr_en), M_DEVBUF, M_WAITOK);
for (i = 0; i < npwr_en; i++) {
sc->pwr_en[i].dev = OF_device_from_xref(prop[i * 3]);
sc->pwr_en[i].pin = prop[i * 3 + 1];
sc->pwr_en[i].pol = prop[i * 3 + 2];
if (sc->pwr_en[i].dev == NULL) {
err = 1;
break;
}
}
OF_prop_free(prop);
if (err) {
device_printf(dev, "unable to parse gpio\n");
goto fail;
}
/* Turn on power by setting pin and then enabling output driver. */
for (i = 0; i < npwr_en; i++) {
if (GPIO_PIN_SET(sc->pwr_en[i].dev, sc->pwr_en[i].pin,
PIN_ON_FLAG(sc->pwr_en[i].pol)) != 0 ||
GPIO_PIN_SETFLAGS(sc->pwr_en[i].dev, sc->pwr_en[i].pin,
GPIO_PIN_OUTPUT) != 0) {
device_printf(dev,
"could not use gpio to control power\n");
goto fail;
}
sc->npwr_en++;
}
/*
* Configure the clock source and divider.
*/
div = 2;
value = CSR_READ_4(sc, AML_USB_PHY_CFG_REG);
value &= ~(AML_USB_PHY_CFG_CLK_DIV_MASK | AML_USB_PHY_CFG_CLK_SEL_MASK);
value &= ~(AML_USB_PHY_CFG_A_RST | AML_USB_PHY_CFG_B_RST);
value &= ~(AML_USB_PHY_CFG_A_PLL_RST | AML_USB_PHY_CFG_B_PLL_RST);
value &= ~(AML_USB_PHY_CFG_A_PHYS_RST | AML_USB_PHY_CFG_B_PHYS_RST);
value &= ~(AML_USB_PHY_CFG_A_POR | AML_USB_PHY_CFG_B_POR);
value |= AML_USB_PHY_CFG_CLK_SEL_XTAL;
value |= ((div - 1) << AML_USB_PHY_CFG_CLK_DIV_SHIFT) &
AML_USB_PHY_CFG_CLK_DIV_MASK;
value |= AML_USB_PHY_CFG_CLK_EN;
CSR_WRITE_4(sc, AML_USB_PHY_CFG_REG, value);
CSR_BARRIER(sc, AML_USB_PHY_CFG_REG);
/*
* Issue the reset sequence.
*/
value |= (AML_USB_PHY_CFG_A_RST | AML_USB_PHY_CFG_B_RST);
CSR_WRITE_4(sc, AML_USB_PHY_CFG_REG, value);
CSR_BARRIER(sc, AML_USB_PHY_CFG_REG);
DELAY(200);
value &= ~(AML_USB_PHY_CFG_A_RST | AML_USB_PHY_CFG_B_RST);
CSR_WRITE_4(sc, AML_USB_PHY_CFG_REG, value);
CSR_BARRIER(sc, AML_USB_PHY_CFG_REG);
DELAY(200);
value |= (AML_USB_PHY_CFG_A_PLL_RST | AML_USB_PHY_CFG_B_PLL_RST);
CSR_WRITE_4(sc, AML_USB_PHY_CFG_REG, value);
CSR_BARRIER(sc, AML_USB_PHY_CFG_REG);
DELAY(200);
value &= ~(AML_USB_PHY_CFG_A_PLL_RST | AML_USB_PHY_CFG_B_PLL_RST);
CSR_WRITE_4(sc, AML_USB_PHY_CFG_REG, value);
CSR_BARRIER(sc, AML_USB_PHY_CFG_REG);
DELAY(200);
value |= (AML_USB_PHY_CFG_A_PHYS_RST | AML_USB_PHY_CFG_B_PHYS_RST);
CSR_WRITE_4(sc, AML_USB_PHY_CFG_REG, value);
CSR_BARRIER(sc, AML_USB_PHY_CFG_REG);
DELAY(200);
value &= ~(AML_USB_PHY_CFG_A_PHYS_RST | AML_USB_PHY_CFG_B_PHYS_RST);
CSR_WRITE_4(sc, AML_USB_PHY_CFG_REG, value);
CSR_BARRIER(sc, AML_USB_PHY_CFG_REG);
DELAY(200);
value |= (AML_USB_PHY_CFG_A_POR | AML_USB_PHY_CFG_B_POR);
CSR_WRITE_4(sc, AML_USB_PHY_CFG_REG, value);
CSR_BARRIER(sc, AML_USB_PHY_CFG_REG);
DELAY(200);
/*
* Enable by clearing the power on reset.
*/
value &= ~(AML_USB_PHY_CFG_A_POR | AML_USB_PHY_CFG_B_POR);
CSR_WRITE_4(sc, AML_USB_PHY_CFG_REG, value);
CSR_BARRIER(sc, AML_USB_PHY_CFG_REG);
DELAY(200);
/*
* Check if the clock was detected.
*/
value = CSR_READ_4(sc, AML_USB_PHY_CFG_REG);
if ((value & AML_USB_PHY_CFG_CLK_DETECTED) !=
AML_USB_PHY_CFG_CLK_DETECTED)
device_printf(dev, "PHY Clock not detected\n");
/*
* Configure the mode for each port.
*/
value = CSR_READ_4(sc, AML_USB_PHY_MISC_A_REG);
value &= ~(AML_USB_PHY_MISC_ID_OVERIDE_EN |
AML_USB_PHY_MISC_ID_OVERIDE_DEVICE |
AML_USB_PHY_MISC_ID_OVERIDE_HOST);
value |= mode_a;
CSR_WRITE_4(sc, AML_USB_PHY_MISC_A_REG, value);
value = CSR_READ_4(sc, AML_USB_PHY_MISC_B_REG);
value &= ~(AML_USB_PHY_MISC_ID_OVERIDE_EN |
AML_USB_PHY_MISC_ID_OVERIDE_DEVICE |
AML_USB_PHY_MISC_ID_OVERIDE_HOST);
value |= mode_b;
CSR_WRITE_4(sc, AML_USB_PHY_MISC_B_REG, value);
CSR_BARRIER(sc, AML_USB_PHY_MISC_B_REG);
return (0);
fail:
/* In the event of problems attempt to turn things back off. */
i = sc->npwr_en;
while (i-- != 0) {
GPIO_PIN_SET(sc->pwr_en[i].dev, sc->pwr_en[i].pin,
PIN_OFF_FLAG(sc->pwr_en[i].pol));
}
free (sc->pwr_en, M_DEVBUF);
sc->pwr_en = NULL;
bus_release_resources(dev, aml8726_usb_phy_spec, sc->res);
return (ENXIO);
}
static int
aml8726_usb_phy_detach(device_t dev)
{
struct aml8726_usb_phy_softc *sc = device_get_softc(dev);
uint32_t i;
uint32_t value;
/*
* Disable by issuing a power on reset.
*/
value = CSR_READ_4(sc, AML_USB_PHY_CFG_REG);
value |= (AML_USB_PHY_CFG_A_POR | AML_USB_PHY_CFG_B_POR);
CSR_WRITE_4(sc, AML_USB_PHY_CFG_REG, value);
CSR_BARRIER(sc, AML_USB_PHY_CFG_REG);
/* Turn off power */
i = sc->npwr_en;
while (i-- != 0) {
(void)GPIO_PIN_SET(sc->pwr_en[i].dev, sc->pwr_en[i].pin,
PIN_OFF_FLAG(sc->pwr_en[i].pol));
}
free (sc->pwr_en, M_DEVBUF);
sc->pwr_en = NULL;
bus_release_resources(dev, aml8726_usb_phy_spec, sc->res);
return (0);
}
static device_method_t aml8726_usb_phy_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, aml8726_usb_phy_probe),
DEVMETHOD(device_attach, aml8726_usb_phy_attach),
DEVMETHOD(device_detach, aml8726_usb_phy_detach),
DEVMETHOD_END
};
static driver_t aml8726_usb_phy_driver = {
"usbphy",
aml8726_usb_phy_methods,
sizeof(struct aml8726_usb_phy_softc),
};
static devclass_t aml8726_usb_phy_devclass;
DRIVER_MODULE(aml8726_m3usbphy, simplebus, aml8726_usb_phy_driver,
aml8726_usb_phy_devclass, 0, 0);
MODULE_DEPEND(aml8726_m3usbphy, aml8726_gpio, 1, 1, 1);