d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1a7cfd07a3
freebsd-dev/sys/dev/usb/uhci.c
Nick Hibma 1a7cfd07a3 Move the disabling of interrupts right before the allocation of the 
resource. Avoids useless interrupts occurring between the allocation
of the interrupt resource and the final initialisation of the
kernel. Cause of these interrupts is unknown (a resuming device?).
1999-05-01 23:30:09 +00:00

2651 lines
64 KiB
C
Raw Blame History

/* $NetBSD: uhci.c,v 1.24 1999/02/20 23:26:16 augustss Exp $ */
/* $FreeBSD$ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (augustss@carlstedt.se) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* USB Universal Host Controller driver.
* Handles PIIX3 and PIIX4.
*
* Data sheets: ftp://download.intel.com/design/intarch/datashts/29055002.pdf
* ftp://download.intel.com/design/intarch/datashts/29056201.pdf
* UHCI spec: http://www.intel.com/design/usb/uhci11d.pdf
* USB spec: http://www.usb.org/cgi-usb/mailmerge.cgi/home/usb/docs/developers/cgiform.tpl
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#if defined(__NetBSD__)
#include <sys/device.h>
#elif defined(__FreeBSD__)
#include <sys/module.h>
#include <sys/bus.h>
#endif
#include <sys/proc.h>
#include <sys/queue.h>
#include <sys/select.h>
#if defined(__FreeBSD__)
#include <machine/bus_pio.h>
#endif
#include <machine/bus.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>
#include <dev/usb/usb_quirks.h>
#include <dev/usb/uhcireg.h>
#include <dev/usb/uhcivar.h>
#if defined(__FreeBSD__)
#include <machine/clock.h>
#define delay(d) DELAY(d)
#endif
#ifdef UHCI_DEBUG
#define DPRINTF(x) if (uhcidebug) logprintf x
#define DPRINTFN(n,x) if (uhcidebug>(n)) logprintf x
int uhcidebug = 1;
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif
#define MS_TO_TICKS(ms) ((ms) * hz / 1000)
struct uhci_pipe {
struct usbd_pipe pipe;
uhci_intr_info_t *iinfo;
int newtoggle;
/* Info needed for different pipe kinds. */
union {
/* Control pipe */
struct {
uhci_soft_qh_t *sqh;
usb_dma_t reqdma;
usb_dma_t datadma;
uhci_soft_td_t *setup, *stat;
u_int length;
} ctl;
/* Interrupt pipe */
struct {
usb_dma_t datadma;
int npoll;
uhci_soft_qh_t **qhs;
} intr;
/* Bulk pipe */
struct {
uhci_soft_qh_t *sqh;
usb_dma_t datadma;
u_int length;
int isread;
} bulk;
/* Iso pipe */
struct iso {
u_int bufsize;
u_int nbuf;
usb_dma_t *bufs;
uhci_soft_td_t **stds;
} iso;
} u;
};
/*
* The uhci_intr_info free list can be global since they contain
* no dma specific data. The other free lists do.
*/
LIST_HEAD(, uhci_intr_info) uhci_ii_free;
void uhci_busreset __P((uhci_softc_t *));
usbd_status uhci_run __P((uhci_softc_t *, int run));
uhci_soft_td_t *uhci_alloc_std __P((uhci_softc_t *));
void uhci_free_std __P((uhci_softc_t *, uhci_soft_td_t *));
uhci_soft_qh_t *uhci_alloc_sqh __P((uhci_softc_t *));
void uhci_free_sqh __P((uhci_softc_t *, uhci_soft_qh_t *));
uhci_intr_info_t *uhci_alloc_intr_info __P((uhci_softc_t *));
void uhci_free_intr_info __P((uhci_intr_info_t *ii));
#if 0
void uhci_enter_ctl_q __P((uhci_softc_t *, uhci_soft_qh_t *,
uhci_intr_info_t *));
void uhci_exit_ctl_q __P((uhci_softc_t *, uhci_soft_qh_t *));
#endif
void uhci_free_std_chain __P((uhci_softc_t *,
uhci_soft_td_t *, uhci_soft_td_t *));
usbd_status uhci_alloc_std_chain __P((struct uhci_pipe *, uhci_softc_t *,
int, int, int, usb_dma_t *,
uhci_soft_td_t **,
uhci_soft_td_t **));
void uhci_timo __P((void *));
void uhci_waitintr __P((uhci_softc_t *, usbd_request_handle));
void uhci_check_intr __P((uhci_softc_t *, uhci_intr_info_t *));
void uhci_ii_done __P((uhci_intr_info_t *, int));
void uhci_timeout __P((void *));
void uhci_wakeup_ctrl __P((void *, int, int, void *, int));
void uhci_lock_frames __P((uhci_softc_t *));
void uhci_unlock_frames __P((uhci_softc_t *));
void uhci_add_ctrl __P((uhci_softc_t *, uhci_soft_qh_t *));
void uhci_add_bulk __P((uhci_softc_t *, uhci_soft_qh_t *));
void uhci_remove_ctrl __P((uhci_softc_t *, uhci_soft_qh_t *));
void uhci_remove_bulk __P((uhci_softc_t *, uhci_soft_qh_t *));
int uhci_str __P((usb_string_descriptor_t *, int, char *));
void uhci_wakeup_cb __P((usbd_request_handle reqh));
usbd_status uhci_device_ctrl_transfer __P((usbd_request_handle));
usbd_status uhci_device_ctrl_start __P((usbd_request_handle));
void uhci_device_ctrl_abort __P((usbd_request_handle));
void uhci_device_ctrl_close __P((usbd_pipe_handle));
usbd_status uhci_device_intr_transfer __P((usbd_request_handle));
usbd_status uhci_device_intr_start __P((usbd_request_handle));
void uhci_device_intr_abort __P((usbd_request_handle));
void uhci_device_intr_close __P((usbd_pipe_handle));
usbd_status uhci_device_bulk_transfer __P((usbd_request_handle));
usbd_status uhci_device_bulk_start __P((usbd_request_handle));
void uhci_device_bulk_abort __P((usbd_request_handle));
void uhci_device_bulk_close __P((usbd_pipe_handle));
usbd_status uhci_device_isoc_transfer __P((usbd_request_handle));
usbd_status uhci_device_isoc_start __P((usbd_request_handle));
void uhci_device_isoc_abort __P((usbd_request_handle));
void uhci_device_isoc_close __P((usbd_pipe_handle));
usbd_status uhci_device_isoc_setbuf __P((usbd_pipe_handle, u_int, u_int));
usbd_status uhci_root_ctrl_transfer __P((usbd_request_handle));
usbd_status uhci_root_ctrl_start __P((usbd_request_handle));
void uhci_root_ctrl_abort __P((usbd_request_handle));
void uhci_root_ctrl_close __P((usbd_pipe_handle));
usbd_status uhci_root_intr_transfer __P((usbd_request_handle));
usbd_status uhci_root_intr_start __P((usbd_request_handle));
void uhci_root_intr_abort __P((usbd_request_handle));
void uhci_root_intr_close __P((usbd_pipe_handle));
usbd_status uhci_open __P((usbd_pipe_handle));
void uhci_poll __P((struct usbd_bus *));
usbd_status uhci_device_request __P((usbd_request_handle reqh));
void uhci_ctrl_done __P((uhci_intr_info_t *ii));
void uhci_bulk_done __P((uhci_intr_info_t *ii));
void uhci_add_intr __P((uhci_softc_t *, int, uhci_soft_qh_t *));
void uhci_remove_intr __P((uhci_softc_t *, int, uhci_soft_qh_t *));
usbd_status uhci_device_setintr __P((uhci_softc_t *sc,
struct uhci_pipe *pipe, int ival));
void uhci_intr_done __P((uhci_intr_info_t *ii));
void uhci_isoc_done __P((uhci_intr_info_t *ii));
#ifdef UHCI_DEBUG
static void uhci_dumpregs __P((uhci_softc_t *));
void uhci_dump_tds __P((uhci_soft_td_t *));
void uhci_dump_qh __P((uhci_soft_qh_t *));
void uhci_dump __P((void));
void uhci_dump_td __P((uhci_soft_td_t *));
#endif
#if defined(__NetBSD__)
#define UWRITE2(sc, r, x) bus_space_write_2((sc)->iot, (sc)->ioh, (r), (x))
#define UWRITE4(sc, r, x) bus_space_write_4((sc)->iot, (sc)->ioh, (r), (x))
#define UREAD2(sc, r) bus_space_read_2((sc)->iot, (sc)->ioh, (r))
#define UREAD4(sc, r) bus_space_read_4((sc)->iot, (sc)->ioh, (r))
#elif defined(__FreeBSD__)
#define UWRITE2(sc, r, x) bus_space_write_2((sc)->iot, (sc)->ioh, (r), (x))
#define UWRITE4(sc, r, x) bus_space_write_4((sc)->iot, (sc)->ioh, (r), (x))
#define UREAD1(sc, r) bus_space_read_1((sc)->iot, (sc)->ioh, (r))
#define UREAD2(sc, r) bus_space_read_2((sc)->iot, (sc)->ioh, (r))
#define UREAD4(sc, r) bus_space_read_4((sc)->iot, (sc)->ioh, (r))
#endif
#define UHCICMD(sc, cmd) UWRITE2(sc, UHCI_CMD, cmd)
#define UHCISTS(sc) UREAD2(sc, UHCI_STS)
#define UHCI_RESET_TIMEOUT 100 /* reset timeout */
#define UHCI_CURFRAME(sc) (UREAD2(sc, UHCI_FRNUM) & UHCI_FRNUM_MASK)
#define UHCI_INTR_ENDPT 1
struct usbd_methods uhci_root_ctrl_methods = {
uhci_root_ctrl_transfer,
uhci_root_ctrl_start,
uhci_root_ctrl_abort,
uhci_root_ctrl_close,
0,
};
struct usbd_methods uhci_root_intr_methods = {
uhci_root_intr_transfer,
uhci_root_intr_start,
uhci_root_intr_abort,
uhci_root_intr_close,
0,
};
struct usbd_methods uhci_device_ctrl_methods = {
uhci_device_ctrl_transfer,
uhci_device_ctrl_start,
uhci_device_ctrl_abort,
uhci_device_ctrl_close,
0,
};
struct usbd_methods uhci_device_intr_methods = {
uhci_device_intr_transfer,
uhci_device_intr_start,
uhci_device_intr_abort,
uhci_device_intr_close,
0,
};
struct usbd_methods uhci_device_bulk_methods = {
uhci_device_bulk_transfer,
uhci_device_bulk_start,
uhci_device_bulk_abort,
uhci_device_bulk_close,
0,
};
struct usbd_methods uhci_device_isoc_methods = {
uhci_device_isoc_transfer,
uhci_device_isoc_start,
uhci_device_isoc_abort,
uhci_device_isoc_close,
uhci_device_isoc_setbuf,
};
void
uhci_busreset(sc)
uhci_softc_t *sc;
{
UHCICMD(sc, UHCI_CMD_GRESET); /* global reset */
usb_delay_ms(&sc->sc_bus, USB_BUS_RESET_DELAY); /* wait a little */
UHCICMD(sc, 0); /* do nothing */
}
usbd_status
uhci_init(sc)
uhci_softc_t *sc;
{
usbd_status r;
int i, j;
uhci_soft_qh_t *csqh, *bsqh, *sqh;
uhci_soft_td_t *std;
usb_dma_t dma;
static int uhci_global_init_done = 0;
DPRINTFN(1,("uhci_init: start\n"));
if (!uhci_global_init_done) {
uhci_global_init_done = 1;
LIST_INIT(&uhci_ii_free);
}
uhci_run(sc, 0); /* stop the controller */
#if defined(__NetBSD__)
UWRITE2(sc, UHCI_INTR, 0); /* disable interrupts */
#endif
uhci_busreset(sc);
/* Allocate and initialize real frame array. */
r = usb_allocmem(sc->sc_dmatag,
UHCI_FRAMELIST_COUNT * sizeof(uhci_physaddr_t),
UHCI_FRAMELIST_ALIGN, &dma);
if (r != USBD_NORMAL_COMPLETION)
return (r);
sc->sc_pframes = KERNADDR(&dma);
UWRITE2(sc, UHCI_FRNUM, 0); /* set frame number to 0 */
UWRITE4(sc, UHCI_FLBASEADDR, DMAADDR(&dma)); /* set frame list */
/* Allocate the dummy QH where bulk traffic will be queued. */
bsqh = uhci_alloc_sqh(sc);
if (!bsqh)
return (USBD_NOMEM);
bsqh->qh->qh_hlink = UHCI_PTR_T; /* end of QH chain */
bsqh->qh->qh_elink = UHCI_PTR_T;
sc->sc_bulk_start = sc->sc_bulk_end = bsqh;
/* Allocate the dummy QH where control traffic will be queued. */
csqh = uhci_alloc_sqh(sc);
if (!csqh)
return (USBD_NOMEM);
csqh->qh->hlink = bsqh;
csqh->qh->qh_hlink = bsqh->physaddr | UHCI_PTR_Q;
csqh->qh->qh_elink = UHCI_PTR_T;
sc->sc_ctl_start = sc->sc_ctl_end = csqh;
/*
* Make all (virtual) frame list pointers point to the interrupt
* queue heads and the interrupt queue heads at the control
* queue head and point the physical frame list to the virtual.
*/
for(i = 0; i < UHCI_VFRAMELIST_COUNT; i++) {
std = uhci_alloc_std(sc);
sqh = uhci_alloc_sqh(sc);
if (!std || !sqh)
return (USBD_NOMEM);
std->td->link.sqh = sqh;
std->td->td_link = sqh->physaddr | UHCI_PTR_Q;
std->td->td_status = UHCI_TD_IOS; /* iso, inactive */
std->td->td_token = 0;
std->td->td_buffer = 0;
sqh->qh->hlink = csqh;
sqh->qh->qh_hlink = csqh->physaddr | UHCI_PTR_Q;
sqh->qh->elink = 0;
sqh->qh->qh_elink = UHCI_PTR_T;
sc->sc_vframes[i].htd = std;
sc->sc_vframes[i].etd = std;
sc->sc_vframes[i].hqh = sqh;
sc->sc_vframes[i].eqh = sqh;
for (j = i;
j < UHCI_FRAMELIST_COUNT;
j += UHCI_VFRAMELIST_COUNT)
sc->sc_pframes[j] = std->physaddr;
}
LIST_INIT(&sc->sc_intrhead);
/* Set up the bus struct. */
sc->sc_bus.open_pipe = uhci_open;
sc->sc_bus.pipe_size = sizeof(struct uhci_pipe);
sc->sc_bus.do_poll = uhci_poll;
DPRINTFN(1,("uhci_init: enabling\n"));
UWRITE2(sc, UHCI_INTR, UHCI_INTR_TOCRCIE | UHCI_INTR_RIE |
UHCI_INTR_IOCE | UHCI_INTR_SPIE); /* enable interrupts */
return (uhci_run(sc, 1)); /* and here we go... */
}
#ifdef UHCI_DEBUG
static void
uhci_dumpregs(sc)
uhci_softc_t *sc;
{
DPRINTF(("%s: regs: cmd=%04x, sts=%04x, intr=%04x, frnum=%04x, "
"flbase=%08x, sof=%02x, portsc1=%04x, portsc2=%04x, ",
USBDEVNAME(sc->sc_bus.bdev),
UREAD2(sc, UHCI_CMD),
UREAD2(sc, UHCI_STS),
UREAD2(sc, UHCI_INTR),
UREAD2(sc, UHCI_FRNUM),
UREAD4(sc, UHCI_FLBASEADDR),
UREAD1(sc, UHCI_SOF),
UREAD2(sc, UHCI_PORTSC1),
UREAD2(sc, UHCI_PORTSC2)));
}
int uhci_longtd = 1;
void
uhci_dump_td(p)
uhci_soft_td_t *p;
{
DPRINTF(("TD(%p) at %08lx link=0x%08lx st=0x%08lx tok=0x%08lx buf=0x%08lx\n",
p, (long)p->physaddr,
(long)p->td->td_link,
(long)p->td->td_status,
(long)p->td->td_token,
(long)p->td->td_buffer));
if (uhci_longtd)
DPRINTF((" %b %b,errcnt=%d,actlen=%d pid=%02x,addr=%d,endpt=%d,"
"D=%d,maxlen=%d\n",
(int)p->td->td_link,
"\20\1T\2Q\3VF",
(int)p->td->td_status,
"\20\22BITSTUFF\23CRCTO\24NAK\25BABBLE\26DBUFFER\27"
"STALLED\30ACTIVE\31IOC\32ISO\33LS\36SPD",
UHCI_TD_GET_ERRCNT(p->td->td_status),
UHCI_TD_GET_ACTLEN(p->td->td_status),
UHCI_TD_GET_PID(p->td->td_token),
UHCI_TD_GET_DEVADDR(p->td->td_token),
UHCI_TD_GET_ENDPT(p->td->td_token),
UHCI_TD_GET_DT(p->td->td_token),
UHCI_TD_GET_MAXLEN(p->td->td_token)));
}
void
uhci_dump_qh(p)
uhci_soft_qh_t *p;
{
DPRINTF(("QH(%p) at %08x: hlink=%08x elink=%08x\n", p, (int)p->physaddr,
p->qh->qh_hlink, p->qh->qh_elink));
}
#if 0
void
uhci_dump()
{
uhci_softc_t *sc = uhci;
uhci_dumpregs(sc);
DPRINTF("intrs=%d\n", sc->sc_intrs);
DPRINTF("framelist[i].link = %08x\n", sc->sc_framelist[0].link);
uhci_dump_qh(sc->sc_ctl_start->qh->hlink);
}
#endif
void
uhci_dump_tds(std)
uhci_soft_td_t *std;
{
uhci_soft_td_t *p;
for(p = std; p; p = p->td->link.std)
uhci_dump_td(p);
}
#endif
/*
* This routine is executed periodically and simulates interrupts
* from the root controller interrupt pipe for port status change.
*/
void
uhci_timo(addr)
void *addr;
{
usbd_request_handle reqh = addr;
usbd_pipe_handle pipe = reqh->pipe;
uhci_softc_t *sc = (uhci_softc_t *)pipe->device->bus;
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
int s;
u_char *p;
DPRINTFN(15, ("uhci_timo\n"));
p = KERNADDR(&upipe->u.intr.datadma);
p[0] = 0;
if (UREAD2(sc, UHCI_PORTSC1) & (UHCI_PORTSC_CSC|UHCI_PORTSC_OCIC))
p[0] |= 1<<1;
if (UREAD2(sc, UHCI_PORTSC2) & (UHCI_PORTSC_CSC|UHCI_PORTSC_OCIC))
p[0] |= 1<<2;
s = splusb();
if (p[0] != 0) {
reqh->actlen = 1;
reqh->status = USBD_NORMAL_COMPLETION;
reqh->xfercb(reqh);
}
if (reqh->pipe->intrreqh == reqh) {
usb_timeout(uhci_timo, reqh, sc->sc_ival, reqh->timo_handle);
} else {
usb_freemem(sc->sc_dmatag, &upipe->u.intr.datadma);
usb_start_next(reqh->pipe);
}
splx(s);
}
void
uhci_lock_frames(sc)
uhci_softc_t *sc;
{
int s = splusb();
while (sc->sc_vflock) {
sc->sc_vflock |= UHCI_WANT_LOCK;
tsleep(&sc->sc_vflock, PRIBIO, "uhcqhl", 0);
}
sc->sc_vflock = UHCI_HAS_LOCK;
splx(s);
}
void
uhci_unlock_frames(sc)
uhci_softc_t *sc;
{
int s = splusb();
sc->sc_vflock &= ~UHCI_HAS_LOCK;
if (sc->sc_vflock & UHCI_WANT_LOCK)
wakeup(&sc->sc_vflock);
splx(s);
}
/*
* Allocate an interrupt information struct. A free list is kept
* for fast allocation.
*/
uhci_intr_info_t *
uhci_alloc_intr_info(sc)
uhci_softc_t *sc;
{
uhci_intr_info_t *ii;
ii = LIST_FIRST(&uhci_ii_free);
if (ii)
LIST_REMOVE(ii, list);
else {
ii = malloc(sizeof(uhci_intr_info_t), M_USBDEV, M_NOWAIT);
}
ii->sc = sc;
#if defined(__FreeBSD__)
callout_handle_init(&ii->timeout_handle);
#endif
return ii;
}
void
uhci_free_intr_info(ii)
uhci_intr_info_t *ii;
{
LIST_INSERT_HEAD(&uhci_ii_free, ii, list); /* and put on free list */
}
/* Add control QH, called at splusb(). */
void
uhci_add_ctrl(sc, sqh)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
{
uhci_qh_t *eqh;
DPRINTFN(10, ("uhci_add_ctrl: sqh=%p\n", sqh));
eqh = sc->sc_ctl_end->qh;
sqh->qh->hlink = eqh->hlink;
sqh->qh->qh_hlink = eqh->qh_hlink;
eqh->hlink = sqh;
eqh->qh_hlink = sqh->physaddr | UHCI_PTR_Q;
sc->sc_ctl_end = sqh;
}
/* Remove control QH, called at splusb(). */
void
uhci_remove_ctrl(sc, sqh)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
{
uhci_soft_qh_t *pqh;
DPRINTFN(10, ("uhci_remove_ctrl: sqh=%p\n", sqh));
for (pqh = sc->sc_ctl_start; pqh->qh->hlink != sqh; pqh=pqh->qh->hlink)
#if defined(DIAGNOSTIC) || defined(UHCI_DEBUG)
if (pqh->qh->qh_hlink & UHCI_PTR_T) {
DPRINTF(("uhci_remove_ctrl: QH not found\n"));
return;
}
#else
;
#endif
pqh->qh->hlink = sqh->qh->hlink;
pqh->qh->qh_hlink = sqh->qh->qh_hlink;
if (sc->sc_ctl_end == sqh)
sc->sc_ctl_end = pqh;
}
/* Add bulk QH, called at splusb(). */
void
uhci_add_bulk(sc, sqh)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
{
uhci_qh_t *eqh;
DPRINTFN(10, ("uhci_add_bulk: sqh=%p\n", sqh));
eqh = sc->sc_bulk_end->qh;
sqh->qh->hlink = eqh->hlink;
sqh->qh->qh_hlink = eqh->qh_hlink;
eqh->hlink = sqh;
eqh->qh_hlink = sqh->physaddr | UHCI_PTR_Q;
sc->sc_bulk_end = sqh;
}
/* Remove bulk QH, called at splusb(). */
void
uhci_remove_bulk(sc, sqh)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
{
uhci_soft_qh_t *pqh;
DPRINTFN(10, ("uhci_remove_bulk: sqh=%p\n", sqh));
for (pqh = sc->sc_bulk_start;
pqh->qh->hlink != sqh;
pqh = pqh->qh->hlink)
#if defined(DIAGNOSTIC) || defined(UHCI_DEBUG)
if (pqh->qh->qh_hlink & UHCI_PTR_T) {
DPRINTF(("uhci_remove_bulk: QH not found\n"));
return;
}
#else
;
#endif
pqh->qh->hlink = sqh->qh->hlink;
pqh->qh->qh_hlink = sqh->qh->qh_hlink;
if (sc->sc_bulk_end == sqh)
sc->sc_bulk_end = pqh;
}
int
uhci_intr(p)
void *p;
{
uhci_softc_t *sc = p;
int status, ret;
uhci_intr_info_t *ii;
sc->sc_intrs++;
#if defined(UHCI_DEBUG)
if (uhcidebug > 9) {
DPRINTF(("uhci_intr %p\n", sc));
uhci_dumpregs(sc);
}
#endif
status = UREAD2(sc, UHCI_STS);
ret = 0;
if (status & UHCI_STS_USBINT) {
UWRITE2(sc, UHCI_STS, UHCI_STS_USBINT); /* acknowledge */
ret = 1;
}
if (status & UHCI_STS_USBEI) {
UWRITE2(sc, UHCI_STS, UHCI_STS_USBEI); /* acknowledge */
ret = 1;
}
if (status & UHCI_STS_RD) {
UWRITE2(sc, UHCI_STS, UHCI_STS_RD); /* acknowledge */
DPRINTF(("%s: resume detect\n", USBDEVNAME(sc->sc_bus.bdev)));
ret = 1;
}
if (status & UHCI_STS_HSE) {
UWRITE2(sc, UHCI_STS, UHCI_STS_HSE); /* acknowledge */
DPRINTF(("%s: Host System Error\n", USBDEVNAME(sc->sc_bus.bdev)));
ret = 1;
}
if (status & UHCI_STS_HCPE) {
UWRITE2(sc, UHCI_STS, UHCI_STS_HCPE); /* acknowledge */
DPRINTF(("%s: Host System Error\n", USBDEVNAME(sc->sc_bus.bdev)));
ret = 1;
}
if (status & UHCI_STS_HCH)
DPRINTF(("%s: controller halted\n", USBDEVNAME(sc->sc_bus.bdev)));
if (!ret)
return 0;
/*
* Interrupts on UHCI really suck. When the host controller
* interrupts because a transfer is completed there is no
* way of knowing which transfer it was. You can scan down
* the TDs and QHs of the previous frame to limit the search,
* but that assumes that the interrupt was not delayed by more
* than 1 ms, which may not always be true (e.g. after debug
* output on a slow console).
* We scan all interrupt descriptors to see if any have
* completed.
*/
for (ii = LIST_FIRST(&sc->sc_intrhead); ii; ii = LIST_NEXT(ii, list))
uhci_check_intr(sc, ii);
DPRINTFN(10, ("uhci_intr: exit\n"));
return 1;
}
/* Check for an interrupt. */
void
uhci_check_intr(sc, ii)
uhci_softc_t *sc;
uhci_intr_info_t *ii;
{
struct uhci_pipe *upipe;
uhci_soft_td_t *std;
u_int32_t status;
DPRINTFN(15, ("uhci_check_intr: ii=%p\n", ii));
#ifdef DIAGNOSTIC
if (!ii) {
printf("uhci_check_intr: no ii? %p\n", ii);
return;
}
if (!ii->stdend) {
printf("uhci_check_intr: ii->stdend==0\n");
return;
}
#endif
if (!ii->stdstart)
return;
/* If the last TD is still active we need to check whether there
* is a an error somewhere in the middle, or whether there was a
* short packet (SPD and not ACTIVE).
*/
if (ii->stdend->td->td_status & UHCI_TD_ACTIVE) {
for (std = ii->stdstart; std != ii->stdend; std = std->td->link.std){
status = std->td->td_status;
DPRINTF(("status=0x%04x\n", status));
if ((status & UHCI_TD_STALLED) ||
(status & (UHCI_TD_SPD | UHCI_TD_ACTIVE)) == UHCI_TD_SPD)
goto done;
}
return;
}
done:
usb_untimeout(uhci_timeout, ii, ii->timeout_handle);
upipe = (struct uhci_pipe *)ii->reqh->pipe;
upipe->pipe.endpoint->toggle = upipe->newtoggle;
uhci_ii_done(ii, 0);
}
void
uhci_ii_done(ii, timo)
uhci_intr_info_t *ii;
int timo; /* timeout that triggered function call? */
{
usbd_request_handle reqh = ii->reqh;
uhci_soft_td_t *std;
int actlen = 0; /* accumulated actual length for queue */
int err = 0; /* error status of last inactive transfer */
DPRINTFN(10, ("uhci_ii_done: ii=%p ready %d\n", ii, timo));
#ifdef DIAGNOSTIC
{
/* avoid finishing a transfer more than once */
int s = splhigh();
if (ii->isdone) {
splx(s);
printf("uhci_ii_done: is done!\n");
return;
}
ii->isdone = 1;
splx(s);
}
#endif
/* The transfer is done; compute actual length and status */
/* XXX Is this correct for control xfers? */
for (std = ii->stdstart; std; std = std->td->link.std) {
if (std->td->td_status & UHCI_TD_ACTIVE)
break;
/* error status of last TD for error handling below */
err = std->td->td_status & UHCI_TD_ERROR;
if (UHCI_TD_GET_PID(std->td->td_token) != UHCI_TD_PID_SETUP)
actlen += UHCI_TD_GET_ACTLEN(std->td->td_status);
}
DPRINTFN(10, ("uhci_ii_done: actlen=%d, err=0x%x\n", actlen, err));
if (err != 0) {
DPRINTFN(-1+((err & ~UHCI_TD_STALLED) != 0),
("uhci_ii_done: error, addr=%d, endpt=0x%02x, "
"err=0x%b\n",
reqh->pipe->device->address,
reqh->pipe->endpoint->edesc->bEndpointAddress,
(int)err,
"\20\22BITSTUFF\23CRCTO\24NAK\25BABBLE\26DBUFFER\27"
"STALLED\30ACTIVE"));
if (err & ~UHCI_TD_STALLED) {
/* more then STALLED, like +BABBLE or +CRC/TIMEOUT */
reqh->status = USBD_IOERROR; /* more info XXX */
} else {
reqh->status = USBD_STALLED;
}
} else {
reqh->status = USBD_NORMAL_COMPLETION;
}
reqh->actlen = actlen;
if (timo) {
/* We got a timeout. Make sure transaction is not active. */
for (std = ii->stdstart; std != 0; std = std->td->link.std)
std->td->td_status &= ~UHCI_TD_ACTIVE;
/* XXX should we wait 1 ms */
reqh->status = USBD_TIMEOUT;
}
DPRINTFN(5, ("uhci_ii_done: calling handler ii=%p\n", ii));
/* select the proper type termination of the transfer
* based on the transfer type for the queue
*/
switch (reqh->pipe->endpoint->edesc->bmAttributes & UE_XFERTYPE) {
case UE_CONTROL:
uhci_ctrl_done(ii);
usb_start_next(reqh->pipe);
break;
case UE_ISOCHRONOUS:
uhci_isoc_done(ii);
usb_start_next(reqh->pipe);
break;
case UE_BULK:
uhci_bulk_done(ii);
usb_start_next(reqh->pipe);
break;
case UE_INTERRUPT:
uhci_intr_done(ii);
break;
}
/* And finally execute callback. */
reqh->xfercb(reqh);
}
/*
* Called when a request does not complete.
*/
void
uhci_timeout(addr)
void *addr;
{
uhci_intr_info_t *ii = addr;
int s;
DPRINTF(("uhci_timeout: ii=%p\n", ii));
#ifdef USB_DEBUG
uhci_dump_tds(ii->stdstart);
#endif
s = splusb();
uhci_ii_done(ii, 1);
splx(s);
}
/*
* Wait here until controller claims to have an interrupt.
* Then call uhci_intr and return. Use timeout to avoid waiting
* too long.
* Only used during boot when interrupts are not enabled yet.
*/
void
uhci_waitintr(sc, reqh)
uhci_softc_t *sc;
usbd_request_handle reqh;
{
int timo = reqh->timeout;
int usecs;
uhci_intr_info_t *ii;
DPRINTFN(15,("uhci_waitintr: timeout = %ds\n", timo));
reqh->status = USBD_IN_PROGRESS;
for (usecs = timo * 1000000 / hz; usecs > 0; usecs -= 1000) {
usb_delay_ms(&sc->sc_bus, 1);
DPRINTFN(10,("uhci_waitintr: 0x%04x\n", UREAD2(sc, UHCI_STS)));
if (UREAD2(sc, UHCI_STS) & UHCI_STS_USBINT) {
uhci_intr(sc);
if (reqh->status != USBD_IN_PROGRESS)
return;
}
}
/* Timeout */
DPRINTF(("uhci_waitintr: timeout\n"));
for (ii = LIST_FIRST(&sc->sc_intrhead);
ii && ii->reqh != reqh;
ii = LIST_NEXT(ii, list))
;
if (ii)
uhci_ii_done(ii, 1);
else
panic("uhci_waitintr: lost intr_info\n");
}
void
uhci_poll(bus)
struct usbd_bus *bus;
{
uhci_softc_t *sc = (uhci_softc_t *)bus;
if (UREAD2(sc, UHCI_STS) & UHCI_STS_USBINT)
uhci_intr(sc);
}
#if 0
void
uhci_reset(p)
void *p;
{
uhci_softc_t *sc = p;
int n;
UHCICMD(sc, UHCI_CMD_HCRESET);
/* The reset bit goes low when the controller is done. */
for (n = 0; n < UHCI_RESET_TIMEOUT &&
(UREAD2(sc, UHCI_CMD) & UHCI_CMD_HCRESET); n++)
delay(100);
if (n >= UHCI_RESET_TIMEOUT)
printf("%s: controller did not reset\n",
USBDEVNAME(sc->sc_bus.bdev));
}
#endif
usbd_status
uhci_run(sc, run)
uhci_softc_t *sc;
int run;
{
int s, n, running;
s = splusb();
running = ((UREAD2(sc, UHCI_STS) & UHCI_STS_HCH) == 0);
if (run == running) {
splx(s);
return (USBD_NORMAL_COMPLETION);
}
UWRITE2(sc, UHCI_CMD, run ? UHCI_CMD_RS : 0);
for(n = 0; n < 10; n++) {
running = ((UREAD2(sc, UHCI_STS) & UHCI_STS_HCH) == 0);
/* return when we've entered the state we want */
if (run == running) {
splx(s);
return (USBD_NORMAL_COMPLETION);
}
usb_delay_ms(&sc->sc_bus, 1);
}
splx(s);
printf("%s: cannot %s\n", USBDEVNAME(sc->sc_bus.bdev),
run ? "start" : "stop");
return (USBD_IOERROR);
}
/*
* Memory management routines.
* uhci_alloc_std allocates TDs
* uhci_alloc_sqh allocates QHs
* These two routines do their own free list management,
* partly for speed, partly because allocating DMAable memory
* has page size granularaity so much memory would be wasted if
* only one TD/QH (32 bytes) was placed in each allocated chunk.
*/
uhci_soft_td_t *
uhci_alloc_std(sc)
uhci_softc_t *sc;
{
uhci_soft_td_t *std;
usbd_status r;
int i;
usb_dma_t dma;
if (!sc->sc_freetds) {
DPRINTFN(2,("uhci_alloc_std: allocating chunk\n"));
std = malloc(sizeof(uhci_soft_td_t) * UHCI_TD_CHUNK,
M_USBDEV, M_NOWAIT);
if (!std)
return (0);
r = usb_allocmem(sc->sc_dmatag, UHCI_TD_SIZE * UHCI_TD_CHUNK,
UHCI_TD_ALIGN, &dma);
if (r != USBD_NORMAL_COMPLETION) {
free(std, M_USBDEV);
return (0);
}
for(i = 0; i < UHCI_TD_CHUNK; i++, std++) {
std->physaddr = DMAADDR(&dma) + i * UHCI_TD_SIZE;
std->td = (uhci_td_t *)
((char *)KERNADDR(&dma) + i * UHCI_TD_SIZE);
std->td->link.std = sc->sc_freetds;
sc->sc_freetds = std;
}
}
std = sc->sc_freetds;
sc->sc_freetds = std->td->link.std;
memset(std->td, 0, UHCI_TD_SIZE);
return std;
}
void
uhci_free_std(sc, std)
uhci_softc_t *sc;
uhci_soft_td_t *std;
{
#ifdef DIAGNOSTIC
#define TD_IS_FREE 0x12345678
if (std->td->td_token == TD_IS_FREE) {
printf("uhci_free_std: freeing free TD %p\n", std);
return;
}
std->td->td_token = TD_IS_FREE;
#endif
std->td->link.std = sc->sc_freetds;
sc->sc_freetds = std;
}
uhci_soft_qh_t *
uhci_alloc_sqh(sc)
uhci_softc_t *sc;
{
uhci_soft_qh_t *sqh;
usbd_status r;
int i, offs;
usb_dma_t dma;
if (!sc->sc_freeqhs) {
DPRINTFN(2, ("uhci_alloc_sqh: allocating chunk\n"));
sqh = malloc(sizeof(uhci_soft_qh_t) * UHCI_QH_CHUNK,
M_USBDEV, M_NOWAIT);
if (!sqh)
return 0;
r = usb_allocmem(sc->sc_dmatag, UHCI_QH_SIZE * UHCI_QH_CHUNK,
UHCI_QH_ALIGN, &dma);
if (r != USBD_NORMAL_COMPLETION) {
free(sqh, M_USBDEV);
return 0;
}
for(i = 0; i < UHCI_QH_CHUNK; i++, sqh++) {
offs = i * UHCI_QH_SIZE;
sqh->physaddr = DMAADDR(&dma) + offs;
sqh->qh = (uhci_qh_t *)
((char *)KERNADDR(&dma) + offs);
sqh->qh->hlink = sc->sc_freeqhs;
sc->sc_freeqhs = sqh;
}
}
sqh = sc->sc_freeqhs;
sc->sc_freeqhs = sqh->qh->hlink;
memset(sqh->qh, 0, UHCI_QH_SIZE);
return (sqh);
}
void
uhci_free_sqh(sc, sqh)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
{
sqh->qh->hlink = sc->sc_freeqhs;
sc->sc_freeqhs = sqh;
}
#if 0
/*
* Enter a list of transfers onto a control queue.
* Called at splusb()
*/
void
uhci_enter_ctl_q(sc, sqh, ii)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
uhci_intr_info_t *ii;
{
DPRINTFN(5, ("uhci_enter_ctl_q: sqh=%p\n", sqh));
}
#endif
void
uhci_free_std_chain(sc, std, stdend)
uhci_softc_t *sc;
uhci_soft_td_t *std;
uhci_soft_td_t *stdend;
{
uhci_soft_td_t *p;
for (; std != stdend; std = p) {
p = std->td->link.std;
uhci_free_std(sc, std);
}
}
usbd_status
uhci_alloc_std_chain(upipe, sc, len, rd, spd, dma, sp, ep)
struct uhci_pipe *upipe;
uhci_softc_t *sc;
int len, rd, spd;
usb_dma_t *dma;
uhci_soft_td_t **sp, **ep;
{
uhci_soft_td_t *p, *lastp;
uhci_physaddr_t lastlink;
int i, ntd, l, tog, maxp;
u_int32_t status;
int addr = upipe->pipe.device->address;
int endpt = upipe->pipe.endpoint->edesc->bEndpointAddress;
DPRINTFN(15, ("uhci_alloc_std_chain: addr=%d endpt=%d len=%d lowspeed=%d "
"spd=%d\n", addr, endpt, len,
upipe->pipe.device->lowspeed, spd));
if (len == 0) {
*sp = *ep = 0;
DPRINTFN(-1,("uhci_alloc_std_chain: len=0\n"));
return (USBD_NORMAL_COMPLETION);
}
maxp = UGETW(upipe->pipe.endpoint->edesc->wMaxPacketSize);
if (maxp == 0) {
printf("uhci_alloc_std_chain: maxp=0\n");
return (USBD_INVAL);
}
ntd = (len + maxp - 1) / maxp;
tog = upipe->pipe.endpoint->toggle;
if (ntd % 2 == 0)
tog ^= 1;
upipe->newtoggle = tog ^ 1;
lastp = 0;
lastlink = UHCI_PTR_T;
ntd--;
status = UHCI_TD_SET_ERRCNT(3) | UHCI_TD_ACTIVE;
if (upipe->pipe.device->lowspeed)
status |= UHCI_TD_LOWSPEED;
if (spd)
status |= UHCI_TD_SPD;
for (i = ntd; i >= 0; i--) {
p = uhci_alloc_std(sc);
if (!p) {
uhci_free_std_chain(sc, lastp, 0);
return (USBD_NOMEM);
}
p->td->link.std = lastp;
p->td->td_link = lastlink;
lastp = p;
lastlink = p->physaddr;
p->td->td_status = status;
if (i == ntd) {
/* last TD */
l = len % maxp;
if (l == 0) l = maxp;
*ep = p;
} else
l = maxp;
p->td->td_token =
rd ? UHCI_TD_IN (l, endpt, addr, tog) :
UHCI_TD_OUT(l, endpt, addr, tog);
p->td->td_buffer = DMAADDR(dma) + i * maxp;
tog ^= 1;
}
*sp = lastp;
/*upipe->pipe.endpoint->toggle = tog;*/
DPRINTFN(10, ("uhci_alloc_std_chain: oldtog=%d newtog=%d\n",
upipe->pipe.endpoint->toggle, upipe->newtoggle));
return (USBD_NORMAL_COMPLETION);
}
usbd_status
uhci_device_bulk_transfer(reqh)
usbd_request_handle reqh;
{
int s;
usbd_status r;
s = splusb();
r = usb_insert_transfer(reqh);
splx(s);
if (r != USBD_NORMAL_COMPLETION)
return (r);
else
return (uhci_device_bulk_start(reqh));
}
usbd_status
uhci_device_bulk_start(reqh)
usbd_request_handle reqh;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)reqh->pipe;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
uhci_intr_info_t *ii = upipe->iinfo;
uhci_soft_td_t *xfer, *xferend;
uhci_soft_qh_t *sqh;
usb_dma_t *dmap;
usbd_status r;
int len, isread;
int s;
DPRINTFN(3, ("uhci_device_bulk_transfer: reqh=%p buf=%p len=%d "
"flags=%d\n",
reqh, reqh->buffer, reqh->length, reqh->flags));
if (reqh->isreq)
panic("uhci_device_bulk_transfer: a request\n");
len = reqh->length;
dmap = &upipe->u.bulk.datadma;
isread = reqh->pipe->endpoint->edesc->bEndpointAddress & UE_IN;
sqh = upipe->u.bulk.sqh;
upipe->u.bulk.isread = isread;
upipe->u.bulk.length = len;
/* XXX FreeBSD can do without dmap, all mem is dma-able */
r = usb_allocmem(sc->sc_dmatag, len, 0, dmap);
if (r != USBD_NORMAL_COMPLETION)
goto ret1;
r = uhci_alloc_std_chain(upipe, sc, len, isread,
reqh->flags & USBD_SHORT_XFER_OK,
dmap, &xfer, &xferend);
if (r != USBD_NORMAL_COMPLETION)
goto ret2;
xferend->td->td_status |= UHCI_TD_IOC;
if (!isread && len != 0)
memcpy(KERNADDR(dmap), reqh->buffer, len);
#ifdef UHCI_DEBUG
if (uhcidebug > 10) {
printf("uhci_device_bulk_transfer: xfer(1)\n");
uhci_dump_tds(xfer);
}
#endif
/* Set up interrupt info. */
ii->reqh = reqh;
ii->stdstart = xfer;
ii->stdend = xferend;
#if defined(__FreeBSD__)
callout_handle_init(&ii->timeout_handle);
#endif
#ifdef DIAGNOSTIC
ii->isdone = 0;
#endif
sqh->qh->elink = xfer;
sqh->qh->qh_elink = xfer->physaddr;
sqh->intr_info = ii;
s = splusb();
uhci_add_bulk(sc, sqh);
LIST_INSERT_HEAD(&sc->sc_intrhead, ii, list);
if (reqh->timeout && !sc->sc_bus.use_polling) {
usb_timeout(uhci_timeout, ii,
MS_TO_TICKS(reqh->timeout), ii->timeout_handle);
}
splx(s);
#if 0
#ifdef UHCI_DEBUG
/* this fails, as the transfer is finished before this one
* gets anywhere near the end -> traverse of non-existing list
*/
if (uhcidebug > 100) {
DPRINTF(("uhci_device_bulk_transfer: xfer(2)\n"));
uhci_dump_tds(xfer);
}
#endif
#endif
return (USBD_IN_PROGRESS);
ret2:
if (len != 0)
usb_freemem(sc->sc_dmatag, dmap);
ret1:
return (r);
}
/* Abort a device bulk request. */
void
uhci_device_bulk_abort(reqh)
usbd_request_handle reqh;
{
/* XXX inactivate */
usb_delay_ms(reqh->pipe->device->bus, 1);/* make sure it is done */
/* XXX call done */
}
/* Close a device bulk pipe. */
void
uhci_device_bulk_close(pipe)
usbd_pipe_handle pipe;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
uhci_free_sqh(sc, upipe->u.bulk.sqh);
uhci_free_intr_info(upipe->iinfo);
/* XXX free other resources */
}
usbd_status
uhci_device_ctrl_transfer(reqh)
usbd_request_handle reqh;
{
int s;
usbd_status r;
s = splusb();
r = usb_insert_transfer(reqh);
splx(s);
if (r != USBD_NORMAL_COMPLETION)
return (r);
else
return (uhci_device_ctrl_start(reqh));
}
usbd_status
uhci_device_ctrl_start(reqh)
usbd_request_handle reqh;
{
uhci_softc_t *sc = (uhci_softc_t *)reqh->pipe->device->bus;
usbd_status r;
if (!reqh->isreq)
panic("uhci_device_ctrl_transfer: not a request\n");
r = uhci_device_request(reqh);
if (r != USBD_NORMAL_COMPLETION)
return (r);
if (sc->sc_bus.use_polling)
uhci_waitintr(sc, reqh);
return (USBD_IN_PROGRESS);
}
usbd_status
uhci_device_intr_transfer(reqh)
usbd_request_handle reqh;
{
int s;
usbd_status r;
s = splusb();
r = usb_insert_transfer(reqh);
splx(s);
if (r != USBD_NORMAL_COMPLETION)
return (r);
else
return (uhci_device_intr_start(reqh));
}
usbd_status
uhci_device_intr_start(reqh)
usbd_request_handle reqh;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)reqh->pipe;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
uhci_intr_info_t *ii = upipe->iinfo;
uhci_soft_td_t *xfer, *xferend;
uhci_soft_qh_t *sqh;
usb_dma_t *dmap;
usbd_status r;
int len, i;
int s;
DPRINTFN(3, ("uhci_device_intr_transfer: reqh=%p buf=%p len=%d "
"flags=%d\n",
reqh, reqh->buffer, reqh->length, reqh->flags));
if (reqh->isreq)
panic("uhci_device_intr_transfer: a request\n");
len = reqh->length;
dmap = &upipe->u.intr.datadma;
if (len == 0)
return (USBD_INVAL); /* XXX should it be? */
r = usb_allocmem(sc->sc_dmatag, len, 0, dmap);
if (r != USBD_NORMAL_COMPLETION)
goto ret1;
r = uhci_alloc_std_chain(upipe, sc, len, 1,
reqh->flags & USBD_SHORT_XFER_OK,
dmap, &xfer, &xferend);
if (r != USBD_NORMAL_COMPLETION)
goto ret2;
xferend->td->td_status |= UHCI_TD_IOC;
#ifdef UHCI_DEBUG
if (uhcidebug > 10) {
DPRINTF(("uhci_device_intr_transfer: xfer(1)\n"));
uhci_dump_tds(xfer);
uhci_dump_qh(upipe->u.intr.qhs[0]);
}
#endif
s = splusb();
/* Set up interrupt info. */
ii->reqh = reqh;
ii->stdstart = xfer;
ii->stdend = xferend;
#ifdef DIAGNOSTIC
ii->isdone = 0;
#endif
DPRINTFN(10,("uhci_device_intr_transfer: qhs[0]=%p\n",
upipe->u.intr.qhs[0]));
for (i = 0; i < upipe->u.intr.npoll; i++) {
sqh = upipe->u.intr.qhs[i];
sqh->qh->elink = xfer;
sqh->qh->qh_elink = xfer->physaddr;
}
splx(s);
#ifdef UHCI_DEBUG
if (uhcidebug > 10) {
DPRINTF(("uhci_device_intr_transfer: xfer(2)\n"));
uhci_dump_tds(xfer);
uhci_dump_qh(upipe->u.intr.qhs[0]);
}
#endif
return (USBD_IN_PROGRESS);
ret2:
if (len != 0)
usb_freemem(sc->sc_dmatag, dmap);
ret1:
return (r);
}
/* Abort a device control request. */
void
uhci_device_ctrl_abort(reqh)
usbd_request_handle reqh;
{
/* XXX inactivate */
usb_delay_ms(reqh->pipe->device->bus, 1); /* make sure it is done */
/* XXX call done */
}
/* Close a device control pipe. */
void
uhci_device_ctrl_close(pipe)
usbd_pipe_handle pipe;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
uhci_free_intr_info(upipe->iinfo);
/* XXX free other resources */
}
/* Abort a device interrupt request. */
void
uhci_device_intr_abort(reqh)
usbd_request_handle reqh;
{
struct uhci_pipe *upipe;
DPRINTFN(1, ("uhci_device_intr_abort: reqh=%p\n", reqh));
/* XXX inactivate */
usb_delay_ms(reqh->pipe->device->bus, 2); /* make sure it is done */
if (reqh->pipe->intrreqh == reqh) {
DPRINTF(("uhci_device_intr_abort: remove\n"));
reqh->pipe->intrreqh = 0;
upipe = (struct uhci_pipe *)reqh->pipe;
uhci_intr_done(upipe->u.intr.qhs[0]->intr_info);
}
}
/* Close a device interrupt pipe. */
void
uhci_device_intr_close(pipe)
usbd_pipe_handle pipe;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
uhci_softc_t *sc = (uhci_softc_t *)pipe->device->bus;
int i, s, npoll;
upipe->iinfo->stdstart = 0; /* inactive */
/* Unlink descriptors from controller data structures. */
npoll = upipe->u.intr.npoll;
uhci_lock_frames(sc);
for (i = 0; i < npoll; i++)
uhci_remove_intr(sc, upipe->u.intr.qhs[i]->pos,
upipe->u.intr.qhs[i]);
uhci_unlock_frames(sc);
/*
* We now have to wait for any activity on the physical
* descriptors to stop.
*/
usb_delay_ms(&sc->sc_bus, 2);
for(i = 0; i < npoll; i++)
uhci_free_sqh(sc, upipe->u.intr.qhs[i]);
free(upipe->u.intr.qhs, M_USB);
s = splusb();
LIST_REMOVE(upipe->iinfo, list); /* remove from active list */
splx(s);
uhci_free_intr_info(upipe->iinfo);
/* XXX free other resources */
}
usbd_status
uhci_device_request(reqh)
usbd_request_handle reqh;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)reqh->pipe;
usb_device_request_t *req = &reqh->request;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
int addr = dev->address;
int endpt = upipe->pipe.endpoint->edesc->bEndpointAddress;
uhci_intr_info_t *ii = upipe->iinfo;
uhci_soft_td_t *setup, *xfer, *stat, *next, *xferend;
uhci_soft_qh_t *sqh;
usb_dma_t *dmap;
int len;
u_int32_t lowspeed;
usbd_status r;
int isread;
int s;
DPRINTFN(3,("uhci_device_control type=0x%02x, request=0x%02x, "
"wValue=0x%04x, wIndex=0x%04x len=%d, addr=%d, endpt=%d\n",
req->bmRequestType, req->bRequest, UGETW(req->wValue),
UGETW(req->wIndex), UGETW(req->wLength),
addr, endpt));
lowspeed = dev->lowspeed ? UHCI_TD_LOWSPEED : 0;
isread = req->bmRequestType & UT_READ;
len = UGETW(req->wLength);
setup = upipe->u.ctl.setup;
stat = upipe->u.ctl.stat;
sqh = upipe->u.ctl.sqh;
dmap = &upipe->u.ctl.datadma;
/* Set up data transaction */
if (len != 0) {
r = usb_allocmem(sc->sc_dmatag, len, 0, dmap);
if (r != USBD_NORMAL_COMPLETION)
goto ret1;
upipe->pipe.endpoint->toggle = 1;
r = uhci_alloc_std_chain(upipe, sc, len, isread,
reqh->flags & USBD_SHORT_XFER_OK,
dmap, &xfer, &xferend);
if (r != USBD_NORMAL_COMPLETION)
goto ret2;
next = xfer;
xferend->td->link.std = stat;
xferend->td->td_link = stat->physaddr;
} else {
next = stat;
}
upipe->u.ctl.length = len;
memcpy(KERNADDR(&upipe->u.ctl.reqdma), req, sizeof *req);
if (!isread && len != 0)
memcpy(KERNADDR(dmap), reqh->buffer, len);
setup->td->link.std = next;
setup->td->td_link = next->physaddr;
setup->td->td_status = UHCI_TD_SET_ERRCNT(3) | lowspeed | UHCI_TD_ACTIVE;
setup->td->td_token = UHCI_TD_SETUP(sizeof *req, endpt, addr);
setup->td->td_buffer = DMAADDR(&upipe->u.ctl.reqdma);
stat->td->link.std = 0;
stat->td->td_link = UHCI_PTR_T;
stat->td->td_status = UHCI_TD_SET_ERRCNT(3) | lowspeed |
UHCI_TD_ACTIVE | UHCI_TD_IOC;
stat->td->td_token =
isread ? UHCI_TD_OUT(0, endpt, addr, 1) :
UHCI_TD_IN (0, endpt, addr, 1);
stat->td->td_buffer = 0;
#ifdef UHCI_DEBUG
if (uhcidebug > 20) {
DPRINTF(("uhci_device_request: setup\n"));
uhci_dump_td(setup);
DPRINTF(("uhci_device_request: stat\n"));
uhci_dump_td(stat);
}
#endif
/* Set up interrupt info. */
ii->reqh = reqh;
ii->stdstart = setup;
ii->stdend = stat;
#if defined(__FreeBSD__)
callout_handle_init(&ii->timeout_handle);
#endif
#ifdef DIAGNOSTIC
ii->isdone = 0;
#endif
sqh->qh->elink = setup;
sqh->qh->qh_elink = setup->physaddr;
sqh->intr_info = ii;
s = splusb();
uhci_add_ctrl(sc, sqh);
LIST_INSERT_HEAD(&sc->sc_intrhead, ii, list);
#ifdef UHCI_DEBUG
if (uhcidebug > 12) {
uhci_soft_td_t *std;
uhci_soft_qh_t *xqh;
uhci_soft_qh_t *sxqh;
int maxqh = 0;
uhci_physaddr_t link;
DPRINTF(("uhci_enter_ctl_q: follow from [0]\n"));
for (std = sc->sc_vframes[0].htd, link = 0;
(link & UHCI_PTR_Q) == 0;
std = std->td->link.std) {
link = std->td->td_link;
uhci_dump_td(std);
}
for (sxqh = xqh = (uhci_soft_qh_t *)std;
xqh;
xqh = (maxqh++ == 5 || xqh->qh->hlink==sxqh ||
xqh->qh->hlink==xqh ? NULL : xqh->qh->hlink)) {
uhci_dump_qh(xqh);
uhci_dump_qh(sxqh);
}
DPRINTF(("Enqueued QH:\n"))
uhci_dump_qh(sqh);
uhci_dump_tds(sqh->qh->elink);
}
#endif
if (reqh->timeout && !sc->sc_bus.use_polling) {
usb_timeout(uhci_timeout, ii,
MS_TO_TICKS(reqh->timeout), ii->timeout_handle);
}
splx(s);
return (USBD_NORMAL_COMPLETION);
ret2:
if (len != 0)
usb_freemem(sc->sc_dmatag, dmap);
ret1:
return (r);
}
usbd_status
uhci_device_isoc_transfer(reqh)
usbd_request_handle reqh;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)reqh->pipe;
#ifdef UHCI_DEBUG
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
#endif
DPRINTFN(1,("uhci_device_isoc_transfer: sc=%p\n", sc));
if (upipe->u.iso.bufsize == 0)
return (USBD_INVAL);
/* XXX copy data */
return (USBD_XXX);
}
usbd_status
uhci_device_isoc_start(reqh)
usbd_request_handle reqh;
{
return (USBD_XXX);
}
void
uhci_device_isoc_abort(reqh)
usbd_request_handle reqh;
{
/* XXX Can't abort a single request. */
}
void
uhci_device_isoc_close(pipe)
usbd_pipe_handle pipe;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
struct iso *iso;
int i;
/*
* Make sure all TDs are marked as inactive.
* Wait for completion.
* Unschedule.
* Deallocate.
*/
iso = &upipe->u.iso;
for (i = 0; i < UHCI_VFRAMELIST_COUNT; i++)
iso->stds[i]->td->td_status &= ~UHCI_TD_ACTIVE;
usb_delay_ms(&sc->sc_bus, 2); /* wait for completion */
uhci_lock_frames(sc);
for (i = 0; i < UHCI_VFRAMELIST_COUNT; i++) {
uhci_soft_td_t *std, *vstd;
std = iso->stds[i];
for (vstd = sc->sc_vframes[i % UHCI_VFRAMELIST_COUNT].htd;
vstd && vstd->td->link.std != std;
vstd = vstd->td->link.std)
;
if (!vstd) {
/*panic*/
printf("uhci_device_isoc_close: %p not found\n", std);
uhci_unlock_frames(sc);
return;
}
vstd->td->link = std->td->link;
vstd->td->td_link = std->td->td_link;
uhci_free_std(sc, std);
}
uhci_unlock_frames(sc);
for (i = 0; i < iso->nbuf; i++)
usb_freemem(sc->sc_dmatag, &iso->bufs[i]);
free(iso->stds, M_USB);
free(iso->bufs, M_USB);
/* XXX what else? */
}
usbd_status
uhci_device_isoc_setbuf(pipe, bufsize, nbuf)
usbd_pipe_handle pipe;
u_int bufsize;
u_int nbuf;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
int addr = upipe->pipe.device->address;
int endpt = upipe->pipe.endpoint->edesc->bEndpointAddress;
int rd = upipe->pipe.endpoint->edesc->bEndpointAddress & UE_IN;
struct iso *iso;
int i;
usbd_status r;
/*
* For simplicity the number of buffers must fit nicely in the frame
* list.
*/
if (UHCI_VFRAMELIST_COUNT % nbuf != 0)
return (USBD_INVAL);
iso = &upipe->u.iso;
iso->bufsize = bufsize;
iso->nbuf = nbuf;
/* Allocate memory for buffers. */
iso->bufs = malloc(nbuf * sizeof(usb_dma_t), M_USB, M_WAITOK);
iso->stds = malloc(UHCI_VFRAMELIST_COUNT * sizeof (uhci_soft_td_t *),
M_USB, M_WAITOK);
for (i = 0; i < nbuf; i++) {
r = usb_allocmem(sc->sc_dmatag, bufsize, 0, &iso->bufs[i]);
if (r != USBD_NORMAL_COMPLETION) {
nbuf = i;
goto bad1;
}
}
/* Allocate the TDs. */
for (i = 0; i < UHCI_VFRAMELIST_COUNT; i++) {
iso->stds[i] = uhci_alloc_std(sc);
if (iso->stds[i] == 0)
goto bad2;
}
/* XXX check schedule */
/* XXX interrupts */
/* Insert TDs into schedule, all marked inactive. */
uhci_lock_frames(sc);
for (i = 0; i < UHCI_VFRAMELIST_COUNT; i++) {
uhci_soft_td_t *std, *vstd;
std = iso->stds[i];
std->td->td_status = UHCI_TD_IOS; /* iso, inactive */
std->td->td_token =
rd ? UHCI_TD_IN (0, endpt, addr, 0) :
UHCI_TD_OUT(0, endpt, addr, 0);
std->td->td_buffer = DMAADDR(&iso->bufs[i % nbuf]);
vstd = sc->sc_vframes[i % UHCI_VFRAMELIST_COUNT].htd;
std->td->link = vstd->td->link;
std->td->td_link = vstd->td->td_link;
vstd->td->link.std = std;
vstd->td->td_link = std->physaddr;
}
uhci_unlock_frames(sc);
return (USBD_NORMAL_COMPLETION);
bad2:
while (--i >= 0)
uhci_free_std(sc, iso->stds[i]);
bad1:
for (i = 0; i < nbuf; i++)
usb_freemem(sc->sc_dmatag, &iso->bufs[i]);
free(iso->stds, M_USB);
free(iso->bufs, M_USB);
return (USBD_NOMEM);
}
void
uhci_isoc_done(ii)
uhci_intr_info_t *ii;
{
}
void
uhci_intr_done(ii)
uhci_intr_info_t *ii;
{
uhci_softc_t *sc = ii->sc;
usbd_request_handle reqh = ii->reqh;
struct uhci_pipe *upipe = (struct uhci_pipe *)reqh->pipe;
usb_dma_t *dma;
uhci_soft_qh_t *sqh;
int i, npoll;
DPRINTFN(5, ("uhci_intr_done: length=%d\n", reqh->actlen));
dma = &upipe->u.intr.datadma;
memcpy(reqh->buffer, KERNADDR(dma), reqh->actlen);
npoll = upipe->u.intr.npoll;
for(i = 0; i < npoll; i++) {
sqh = upipe->u.intr.qhs[i];
sqh->qh->elink = 0;
sqh->qh->qh_elink = UHCI_PTR_T;
}
uhci_free_std_chain(sc, ii->stdstart, 0);
/* XXX Wasteful. */
if (reqh->pipe->intrreqh == reqh) {
uhci_soft_td_t *xfer, *xferend;
/* This alloc cannot fail since we freed the chain above. */
uhci_alloc_std_chain(upipe, sc, reqh->length, 1,
reqh->flags & USBD_SHORT_XFER_OK,
dma, &xfer, &xferend);
xferend->td->td_status |= UHCI_TD_IOC;
#ifdef UHCI_DEBUG
if (uhcidebug > 10) {
DPRINTF(("uhci_device_intr_done: xfer(1)\n"));
uhci_dump_tds(xfer);
uhci_dump_qh(upipe->u.intr.qhs[0]);
}
#endif
ii->stdstart = xfer;
ii->stdend = xferend;
#ifdef DIAGNOSTIC
ii->isdone = 0;
#endif
for (i = 0; i < npoll; i++) {
sqh = upipe->u.intr.qhs[i];
sqh->qh->elink = xfer;
sqh->qh->qh_elink = xfer->physaddr;
}
} else {
usb_freemem(sc->sc_dmatag, dma);
ii->stdstart = 0; /* mark as inactive */
usb_start_next(reqh->pipe);
}
}
/* Deallocate request data structures */
void
uhci_ctrl_done(ii)
uhci_intr_info_t *ii;
{
uhci_softc_t *sc = ii->sc;
usbd_request_handle reqh = ii->reqh;
struct uhci_pipe *upipe = (struct uhci_pipe *)reqh->pipe;
u_int len = upipe->u.ctl.length;
usb_dma_t *dma;
uhci_td_t *htd = ii->stdstart->td;
#ifdef DIAGNOSTIC
if (!reqh->isreq)
panic("uhci_ctrl_done: not a request\n");
#endif
LIST_REMOVE(ii, list); /* remove from active list */
uhci_remove_ctrl(sc, upipe->u.ctl.sqh);
if (len != 0) {
dma = &upipe->u.ctl.datadma;
if (reqh->request.bmRequestType & UT_READ)
memcpy(reqh->buffer, KERNADDR(dma), len);
uhci_free_std_chain(sc, htd->link.std, ii->stdend);
usb_freemem(sc->sc_dmatag, dma);
}
DPRINTFN(5, ("uhci_ctrl_done: length=%d\n", reqh->actlen));
}
/* Deallocate request data structures */
void
uhci_bulk_done(ii)
uhci_intr_info_t *ii;
{
uhci_softc_t *sc = ii->sc;
usbd_request_handle reqh = ii->reqh;
struct uhci_pipe *upipe = (struct uhci_pipe *)reqh->pipe;
u_int len = upipe->u.bulk.length;
usb_dma_t *dma;
uhci_td_t *htd = ii->stdstart->td;
LIST_REMOVE(ii, list); /* remove from active list */
uhci_remove_bulk(sc, upipe->u.bulk.sqh);
if (len != 0) {
dma = &upipe->u.bulk.datadma;
if (upipe->u.bulk.isread && len != 0)
memcpy(reqh->buffer, KERNADDR(dma), len);
uhci_free_std_chain(sc, htd->link.std, 0);
usb_freemem(sc->sc_dmatag, dma);
}
DPRINTFN(4, ("uhci_bulk_done: length=%d\n", reqh->actlen));
/* XXX compute new toggle */
}
/* Add interrupt QH, called with vflock. */
void
uhci_add_intr(sc, n, sqh)
uhci_softc_t *sc;
int n;
uhci_soft_qh_t *sqh;
{
struct uhci_vframe *vf = &sc->sc_vframes[n];
uhci_qh_t *eqh;
DPRINTFN(4, ("uhci_add_intr: n=%d sqh=%p\n", n, sqh));
eqh = vf->eqh->qh;
sqh->qh->hlink = eqh->hlink;
sqh->qh->qh_hlink = eqh->qh_hlink;
eqh->hlink = sqh;
eqh->qh_hlink = sqh->physaddr | UHCI_PTR_Q;
vf->eqh = sqh;
vf->bandwidth++;
}
/* Remove interrupt QH, called with vflock. */
void
uhci_remove_intr(sc, n, sqh)
uhci_softc_t *sc;
int n;
uhci_soft_qh_t *sqh;
{
struct uhci_vframe *vf = &sc->sc_vframes[n];
uhci_soft_qh_t *pqh;
DPRINTFN(4, ("uhci_remove_intr: n=%d sqh=%p\n", n, sqh));
for (pqh = vf->hqh; pqh->qh->hlink != sqh; pqh = pqh->qh->hlink)
#if defined(DIAGNOSTIC) || defined(UHCI_DEBUG)
if (pqh->qh->qh_hlink & UHCI_PTR_T) {
DPRINTF(("uhci_remove_intr: QH not found\n"));
return;
}
#else
;
#endif
pqh->qh->hlink = sqh->qh->hlink;
pqh->qh->qh_hlink = sqh->qh->qh_hlink;
if (vf->eqh == sqh)
vf->eqh = pqh;
vf->bandwidth--;
}
usbd_status
uhci_device_setintr(sc, upipe, ival)
uhci_softc_t *sc;
struct uhci_pipe *upipe;
int ival;
{
uhci_soft_qh_t *sqh;
int i, npoll, s;
u_int bestbw, bw, bestoffs, offs;
DPRINTFN(2, ("uhci_setintr: pipe=%p\n", upipe));
if (ival == 0) {
printf("uhci_setintr: 0 interval\n");
return (USBD_INVAL);
}
if (ival > UHCI_VFRAMELIST_COUNT)
ival = UHCI_VFRAMELIST_COUNT;
npoll = (UHCI_VFRAMELIST_COUNT + ival - 1) / ival;
DPRINTFN(2, ("uhci_setintr: ival=%d npoll=%d\n", ival, npoll));
upipe->u.intr.npoll = npoll;
upipe->u.intr.qhs =
malloc(npoll * sizeof(uhci_soft_qh_t *), M_USB, M_WAITOK);
/*
* Figure out which offset in the schedule that has most
* bandwidth left over.
*/
#define MOD(i) ((i) & (UHCI_VFRAMELIST_COUNT-1))
for (bestoffs = offs = 0, bestbw = ~0; offs < ival; offs++) {
for (bw = i = 0; i < npoll; i++)
bw += sc->sc_vframes[MOD(i * ival + offs)].bandwidth;
if (bw < bestbw) {
bestbw = bw;
bestoffs = offs;
}
}
DPRINTFN(1, ("uhci_setintr: bw=%d offs=%d\n", bestbw, bestoffs));
upipe->iinfo->stdstart = 0;
for(i = 0; i < npoll; i++) {
upipe->u.intr.qhs[i] = sqh = uhci_alloc_sqh(sc);
sqh->qh->elink = 0;
sqh->qh->qh_elink = UHCI_PTR_T;
sqh->pos = MOD(i * ival + bestoffs);
sqh->intr_info = upipe->iinfo;
}
#undef MOD
s = splusb();
LIST_INSERT_HEAD(&sc->sc_intrhead, upipe->iinfo, list);
splx(s);
uhci_lock_frames(sc);
/* Enter QHs into the controller data structures. */
for(i = 0; i < npoll; i++)
uhci_add_intr(sc, upipe->u.intr.qhs[i]->pos,
upipe->u.intr.qhs[i]);
uhci_unlock_frames(sc);
DPRINTFN(5, ("uhci_setintr: returns %p\n", upipe));
return (USBD_NORMAL_COMPLETION);
}
/* Open a new pipe. */
usbd_status
uhci_open(pipe)
usbd_pipe_handle pipe;
{
uhci_softc_t *sc = (uhci_softc_t *)pipe->device->bus;
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc;
usbd_status r;
DPRINTFN(1, ("uhci_open: pipe=%p, addr=%d, endpt=%d (%d)\n",
pipe, pipe->device->address,
ed->bEndpointAddress, sc->sc_addr));
if (pipe->device->address == sc->sc_addr) {
switch (ed->bEndpointAddress) {
case USB_CONTROL_ENDPOINT:
pipe->methods = &uhci_root_ctrl_methods;
break;
case UE_IN | UHCI_INTR_ENDPT:
pipe->methods = &uhci_root_intr_methods;
break;
default:
return (USBD_INVAL);
}
} else {
upipe->iinfo = uhci_alloc_intr_info(sc);
if (upipe->iinfo == 0)
return (USBD_NOMEM);
switch (ed->bmAttributes & UE_XFERTYPE) {
case UE_CONTROL:
pipe->methods = &uhci_device_ctrl_methods;
upipe->u.ctl.sqh = uhci_alloc_sqh(sc);
if (upipe->u.ctl.sqh == 0)
goto bad;
upipe->u.ctl.setup = uhci_alloc_std(sc);
if (upipe->u.ctl.setup == 0) {
uhci_free_sqh(sc, upipe->u.ctl.sqh);
goto bad;
}
upipe->u.ctl.stat = uhci_alloc_std(sc);
if (upipe->u.ctl.stat == 0) {
uhci_free_sqh(sc, upipe->u.ctl.sqh);
uhci_free_std(sc, upipe->u.ctl.setup);
goto bad;
}
r = usb_allocmem(sc->sc_dmatag,
sizeof(usb_device_request_t),
0, &upipe->u.ctl.reqdma);
if (r != USBD_NORMAL_COMPLETION) {
uhci_free_sqh(sc, upipe->u.ctl.sqh);
uhci_free_std(sc, upipe->u.ctl.setup);
uhci_free_std(sc, upipe->u.ctl.stat);
goto bad;
}
break;
case UE_INTERRUPT:
pipe->methods = &uhci_device_intr_methods;
return (uhci_device_setintr(sc, upipe, ed->bInterval));
case UE_ISOCHRONOUS:
pipe->methods = &uhci_device_isoc_methods;
upipe->u.iso.nbuf = 0;
return (USBD_NORMAL_COMPLETION);
case UE_BULK:
pipe->methods = &uhci_device_bulk_methods;
upipe->u.bulk.sqh = uhci_alloc_sqh(sc);
if (upipe->u.bulk.sqh == 0)
goto bad;
break;
}
}
return (USBD_NORMAL_COMPLETION);
bad:
uhci_free_intr_info(upipe->iinfo);
return (USBD_NOMEM);
}
/*
* Data structures and routines to emulate the root hub.
*/
usb_device_descriptor_t uhci_devd = {
USB_DEVICE_DESCRIPTOR_SIZE,
UDESC_DEVICE, /* type */
{0x00, 0x01}, /* USB version */
UCLASS_HUB, /* class */
USUBCLASS_HUB, /* subclass */
0, /* protocol */
64, /* max packet */
{0},{0},{0x00,0x01}, /* device id */
1,2,0, /* string indicies */
1 /* # of configurations */
};
usb_config_descriptor_t uhci_confd = {
USB_CONFIG_DESCRIPTOR_SIZE,
UDESC_CONFIG,
{USB_CONFIG_DESCRIPTOR_SIZE +
USB_INTERFACE_DESCRIPTOR_SIZE +
USB_ENDPOINT_DESCRIPTOR_SIZE},
1,
1,
0,
UC_SELF_POWERED,
0 /* max power */
};
usb_interface_descriptor_t uhci_ifcd = {
USB_INTERFACE_DESCRIPTOR_SIZE,
UDESC_INTERFACE,
0,
0,
1,
UCLASS_HUB,
USUBCLASS_HUB,
0,
0
};
usb_endpoint_descriptor_t uhci_endpd = {
USB_ENDPOINT_DESCRIPTOR_SIZE,
UDESC_ENDPOINT,
UE_IN | UHCI_INTR_ENDPT,
UE_INTERRUPT,
{8},
255
};
usb_hub_descriptor_t uhci_hubd_piix = {
USB_HUB_DESCRIPTOR_SIZE,
UDESC_HUB,
2,
{ UHD_PWR_NO_SWITCH | UHD_OC_INDIVIDUAL, 0 },
50, /* power on to power good */
0,
{ 0x00 }, /* both ports are removable */
};
int
uhci_str(p, l, s)
usb_string_descriptor_t *p;
int l;
char *s;
{
int i;
if (l == 0)
return (0);
p->bLength = 2 * strlen(s) + 2;
if (l == 1)
return (1);
p->bDescriptorType = UDESC_STRING;
l -= 2;
for (i = 0; s[i] && l > 1; i++, l -= 2)
USETW2(p->bString[i], 0, s[i]);
return (2*i+2);
}
/*
* Simulate a hardware hub by handling all the necessary requests.
*/
usbd_status
uhci_root_ctrl_transfer(reqh)
usbd_request_handle reqh;
{
int s;
usbd_status r;
s = splusb();
r = usb_insert_transfer(reqh);
splx(s);
if (r != USBD_NORMAL_COMPLETION)
return (r);
else
return (uhci_root_ctrl_start(reqh));
}
usbd_status
uhci_root_ctrl_start(reqh)
usbd_request_handle reqh;
{
uhci_softc_t *sc = (uhci_softc_t *)reqh->pipe->device->bus;
usb_device_request_t *req;
void *buf;
int port, x;
int len, value, index, status, change, l, totlen = 0;
usb_port_status_t ps;
usbd_status r;
if (!reqh->isreq)
panic("uhci_root_ctrl_transfer: not a request\n");
req = &reqh->request;
buf = reqh->buffer;
DPRINTFN(10,("uhci_root_ctrl_control type=0x%02x request=%02x\n",
req->bmRequestType, req->bRequest));
len = UGETW(req->wLength);
value = UGETW(req->wValue);
index = UGETW(req->wIndex);
#define C(x,y) ((x) | ((y) << 8))
switch(C(req->bRequest, req->bmRequestType)) {
case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE):
case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE):
case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT):
/*
* DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops
* for the integrated root hub.
*/
break;
case C(UR_GET_CONFIG, UT_READ_DEVICE):
if (len > 0) {
*(u_int8_t *)buf = sc->sc_conf;
totlen = 1;
}
break;
case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE):
DPRINTFN(2,("uhci_root_ctrl_control wValue=0x%04x\n", value));
switch(value >> 8) {
case UDESC_DEVICE:
if ((value & 0xff) != 0) {
r = USBD_IOERROR;
goto ret;
}
totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE);
memcpy(buf, &uhci_devd, l);
break;
case UDESC_CONFIG:
if ((value & 0xff) != 0) {
r = USBD_IOERROR;
goto ret;
}
totlen = l = min(len, USB_CONFIG_DESCRIPTOR_SIZE);
memcpy(buf, &uhci_confd, l);
buf = (char *)buf + l;
len -= l;
l = min(len, USB_INTERFACE_DESCRIPTOR_SIZE);
totlen += l;
memcpy(buf, &uhci_ifcd, l);
buf = (char *)buf + l;
len -= l;
l = min(len, USB_ENDPOINT_DESCRIPTOR_SIZE);
totlen += l;
memcpy(buf, &uhci_endpd, l);
break;
case UDESC_STRING:
if (len == 0)
break;
*(u_int8_t *)buf = 0;
totlen = 1;
switch (value & 0xff) {
case 1: /* Vendor */
totlen = uhci_str(buf, len, sc->sc_vendor);
break;
case 2: /* Product */
totlen = uhci_str(buf, len, "UHCI root hub");
break;
}
break;
default:
r = USBD_IOERROR;
goto ret;
}
break;
case C(UR_GET_INTERFACE, UT_READ_INTERFACE):
if (len > 0) {
*(u_int8_t *)buf = 0;
totlen = 1;
}
break;
case C(UR_GET_STATUS, UT_READ_DEVICE):
if (len > 1) {
USETW(((usb_status_t *)buf)->wStatus,UDS_SELF_POWERED);
totlen = 2;
}
break;
case C(UR_GET_STATUS, UT_READ_INTERFACE):
case C(UR_GET_STATUS, UT_READ_ENDPOINT):
if (len > 1) {
USETW(((usb_status_t *)buf)->wStatus, 0);
totlen = 2;
}
break;
case C(UR_SET_ADDRESS, UT_WRITE_DEVICE):
if (value >= USB_MAX_DEVICES) {
r = USBD_IOERROR;
goto ret;
}
sc->sc_addr = value;
break;
case C(UR_SET_CONFIG, UT_WRITE_DEVICE):
if (value != 0 && value != 1) {
r = USBD_IOERROR;
goto ret;
}
sc->sc_conf = value;
break;
case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE):
break;
case C(UR_SET_FEATURE, UT_WRITE_DEVICE):
case C(UR_SET_FEATURE, UT_WRITE_INTERFACE):
case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT):
r = USBD_IOERROR;
goto ret;
case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE):
break;
case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT):
break;
/* Hub requests */
case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE):
break;
case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER):
DPRINTFN(3, ("uhci_root_ctrl_control: UR_CLEAR_PORT_FEATURE "
"port=%d feature=%d\n",
index, value));
if (index == 1)
port = UHCI_PORTSC1;
else if (index == 2)
port = UHCI_PORTSC2;
else {
r = USBD_IOERROR;
goto ret;
}
switch(value) {
case UHF_PORT_ENABLE:
x = UREAD2(sc, port);
UWRITE2(sc, port, x & ~UHCI_PORTSC_PE);
break;
case UHF_PORT_SUSPEND:
x = UREAD2(sc, port);
UWRITE2(sc, port, x & ~UHCI_PORTSC_SUSP);
break;
case UHF_PORT_RESET:
x = UREAD2(sc, port);
UWRITE2(sc, port, x & ~UHCI_PORTSC_PR);
break;
case UHF_C_PORT_CONNECTION:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_CSC);
break;
case UHF_C_PORT_ENABLE:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_POEDC);
break;
case UHF_C_PORT_OVER_CURRENT:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_OCIC);
break;
case UHF_C_PORT_RESET:
sc->sc_isreset = 0;
r = USBD_NORMAL_COMPLETION;
goto ret;
case UHF_PORT_CONNECTION:
case UHF_PORT_OVER_CURRENT:
case UHF_PORT_POWER:
case UHF_PORT_LOW_SPEED:
case UHF_C_PORT_SUSPEND:
default:
r = USBD_IOERROR;
goto ret;
}
break;
case C(UR_GET_BUS_STATE, UT_READ_CLASS_OTHER):
if (index == 1)
port = UHCI_PORTSC1;
else if (index == 2)
port = UHCI_PORTSC2;
else {
r = USBD_IOERROR;
goto ret;
}
if (len > 0) {
*(u_int8_t *)buf =
(UREAD2(sc, port) & UHCI_PORTSC_LS) >>
UHCI_PORTSC_LS_SHIFT;
totlen = 1;
}
break;
case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE):
if (value != 0) {
r = USBD_IOERROR;
goto ret;
}
l = min(len, USB_HUB_DESCRIPTOR_SIZE);
totlen = l;
memcpy(buf, &uhci_hubd_piix, l);
break;
case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE):
if (len != 4) {
r = USBD_IOERROR;
goto ret;
}
memset(buf, 0, len);
totlen = len;
break;
case C(UR_GET_STATUS, UT_READ_CLASS_OTHER):
if (index == 1)
port = UHCI_PORTSC1;
else if (index == 2)
port = UHCI_PORTSC2;
else {
r = USBD_IOERROR;
goto ret;
}
if (len != 4) {
r = USBD_IOERROR;
goto ret;
}
x = UREAD2(sc, port);
status = change = 0;
if (x & UHCI_PORTSC_CCS )
status |= UPS_CURRENT_CONNECT_STATUS;
if (x & UHCI_PORTSC_CSC )
change |= UPS_C_CONNECT_STATUS;
if (x & UHCI_PORTSC_PE )
status |= UPS_PORT_ENABLED;
if (x & UHCI_PORTSC_POEDC)
change |= UPS_C_PORT_ENABLED;
if (x & UHCI_PORTSC_OCI )
status |= UPS_OVERCURRENT_INDICATOR;
if (x & UHCI_PORTSC_OCIC )
change |= UPS_C_OVERCURRENT_INDICATOR;
if (x & UHCI_PORTSC_SUSP )
status |= UPS_SUSPEND;
if (x & UHCI_PORTSC_LSDA )
status |= UPS_LOW_SPEED;
status |= UPS_PORT_POWER;
if (sc->sc_isreset)
change |= UPS_C_PORT_RESET;
USETW(ps.wPortStatus, status);
USETW(ps.wPortChange, change);
l = min(len, sizeof ps);
memcpy(buf, &ps, l);
totlen = l;
break;
case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE):
r = USBD_IOERROR;
goto ret;
case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE):
break;
case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER):
if (index == 1)
port = UHCI_PORTSC1;
else if (index == 2)
port = UHCI_PORTSC2;
else {
r = USBD_IOERROR;
goto ret;
}
switch(value) {
case UHF_PORT_ENABLE:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_PE);
break;
case UHF_PORT_SUSPEND:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_SUSP);
break;
case UHF_PORT_RESET:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_PR);
usb_delay_ms(&sc->sc_bus, 10);
UWRITE2(sc, port, x & ~UHCI_PORTSC_PR);
delay(100);
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_PE);
delay(100);
DPRINTFN(3,("uhci port %d reset, status = 0x%04x\n",
index, UREAD2(sc, port)));
sc->sc_isreset = 1;
break;
case UHF_C_PORT_CONNECTION:
case UHF_C_PORT_ENABLE:
case UHF_C_PORT_OVER_CURRENT:
case UHF_PORT_CONNECTION:
case UHF_PORT_OVER_CURRENT:
case UHF_PORT_POWER:
case UHF_PORT_LOW_SPEED:
case UHF_C_PORT_SUSPEND:
case UHF_C_PORT_RESET:
default:
r = USBD_IOERROR;
goto ret;
}
break;
default:
r = USBD_IOERROR;
goto ret;
}
reqh->actlen = totlen;
r = USBD_NORMAL_COMPLETION;
ret:
reqh->status = r;
reqh->xfercb(reqh);
usb_start_next(reqh->pipe);
return (USBD_IN_PROGRESS);
}
/* Abort a root control request. */
void
uhci_root_ctrl_abort(reqh)
usbd_request_handle reqh;
{
/* Nothing to do, all transfers are syncronous. */
}
/* Close the root pipe. */
void
uhci_root_ctrl_close(pipe)
usbd_pipe_handle pipe;
{
usb_untimeout(uhci_timo, pipe->intrreqh, pipe->intrreqh->timo_handle);
DPRINTF(("uhci_root_ctrl_close\n"));
}
/* Abort a root interrupt request. */
void
uhci_root_intr_abort(reqh)
usbd_request_handle reqh;
{
usb_untimeout(uhci_timo, reqh, reqh->timo_handle);
}
usbd_status
uhci_root_intr_transfer(reqh)
usbd_request_handle reqh;
{
int s;
usbd_status r;
s = splusb();
r = usb_insert_transfer(reqh);
splx(s);
if (r != USBD_NORMAL_COMPLETION)
return (r);
else
return (uhci_root_intr_start(reqh));
}
/* Start a transfer on the root interrupt pipe */
usbd_status
uhci_root_intr_start(reqh)
usbd_request_handle reqh;
{
usbd_pipe_handle pipe = reqh->pipe;
uhci_softc_t *sc = (uhci_softc_t *)pipe->device->bus;
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
usb_dma_t *dmap;
usbd_status r;
int len;
DPRINTFN(3, ("uhci_root_intr_transfer: reqh=%p buf=%p len=%d "
"flags=%d\n",
reqh, reqh->buffer, reqh->length, reqh->flags));
len = reqh->length;
dmap = &upipe->u.intr.datadma;
if (len == 0)
return (USBD_INVAL); /* XXX should it be? */
r = usb_allocmem(sc->sc_dmatag, len, 0, dmap);
if (r != USBD_NORMAL_COMPLETION)
return (r);
sc->sc_ival = MS_TO_TICKS(reqh->pipe->endpoint->edesc->bInterval);
usb_timeout(uhci_timo, reqh, sc->sc_ival, reqh->timo_handle);
return (USBD_IN_PROGRESS);
}
/* Close the root interrupt pipe. */
void
uhci_root_intr_close(pipe)
usbd_pipe_handle pipe;
{
usb_untimeout(uhci_timo, pipe->intrreqh, pipe->intrreqh->timo_handle);
DPRINTF(("uhci_root_intr_close\n"));
}
Reference in New Issue View Git Blame Copy Permalink