freebsd-dev/sys/dev/iwn/if_iwnvar.h
Bernhard Schmidt 2d5c617a52 For 6000 series and newer devices the DC calibration results are no
longer requested of the boot firmware. Instead of sending those results
to the runtime firmware the firmware is told to do the DC calibration
itself.

MFC after:	1 week
2010-12-05 09:00:32 +00:00

330 lines
8.1 KiB
C

/* $FreeBSD$ */
/* $OpenBSD: if_iwnvar.h,v 1.18 2010/04/30 16:06:46 damien Exp $ */
/*-
* Copyright (c) 2007, 2008
* Damien Bergamini <damien.bergamini@free.fr>
* Copyright (c) 2008 Sam Leffler, Errno Consulting
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
struct iwn_rx_radiotap_header {
struct ieee80211_radiotap_header wr_ihdr;
uint64_t wr_tsft;
uint8_t wr_flags;
uint8_t wr_rate;
uint16_t wr_chan_freq;
uint16_t wr_chan_flags;
int8_t wr_dbm_antsignal;
int8_t wr_dbm_antnoise;
} __packed;
#define IWN_RX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_TSFT) | \
(1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | \
(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE))
struct iwn_tx_radiotap_header {
struct ieee80211_radiotap_header wt_ihdr;
uint8_t wt_flags;
uint8_t wt_rate;
uint16_t wt_chan_freq;
uint16_t wt_chan_flags;
} __packed;
#define IWN_TX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL))
struct iwn_dma_info {
bus_dma_tag_t tag;
bus_dmamap_t map;
bus_dma_segment_t seg;
bus_addr_t paddr;
caddr_t vaddr;
bus_size_t size;
};
struct iwn_tx_data {
bus_dmamap_t map;
bus_addr_t cmd_paddr;
bus_addr_t scratch_paddr;
struct mbuf *m;
struct ieee80211_node *ni;
};
struct iwn_tx_ring {
struct iwn_dma_info desc_dma;
struct iwn_dma_info cmd_dma;
struct iwn_tx_desc *desc;
struct iwn_tx_cmd *cmd;
struct iwn_tx_data data[IWN_TX_RING_COUNT];
bus_dma_tag_t data_dmat;
int qid;
int queued;
int cur;
};
struct iwn_softc;
struct iwn_rx_data {
struct mbuf *m;
bus_dmamap_t map;
};
struct iwn_rx_ring {
struct iwn_dma_info desc_dma;
struct iwn_dma_info stat_dma;
uint32_t *desc;
struct iwn_rx_status *stat;
struct iwn_rx_data data[IWN_RX_RING_COUNT];
bus_dma_tag_t data_dmat;
int cur;
};
struct iwn_node {
struct ieee80211_node ni; /* must be the first */
uint16_t disable_tid;
uint8_t id;
uint8_t ridx[IEEE80211_RATE_MAXSIZE];
};
struct iwn_calib_state {
uint8_t state;
#define IWN_CALIB_STATE_INIT 0
#define IWN_CALIB_STATE_ASSOC 1
#define IWN_CALIB_STATE_RUN 2
u_int nbeacons;
uint32_t noise[3];
uint32_t rssi[3];
uint32_t ofdm_x1;
uint32_t ofdm_mrc_x1;
uint32_t ofdm_x4;
uint32_t ofdm_mrc_x4;
uint32_t cck_x4;
uint32_t cck_mrc_x4;
uint32_t bad_plcp_ofdm;
uint32_t fa_ofdm;
uint32_t bad_plcp_cck;
uint32_t fa_cck;
uint32_t low_fa;
uint8_t cck_state;
#define IWN_CCK_STATE_INIT 0
#define IWN_CCK_STATE_LOFA 1
#define IWN_CCK_STATE_HIFA 2
uint8_t noise_samples[20];
u_int cur_noise_sample;
uint8_t noise_ref;
uint32_t energy_samples[10];
u_int cur_energy_sample;
uint32_t energy_cck;
};
struct iwn_calib_info {
uint8_t *buf;
u_int len;
};
struct iwn_fw_part {
const uint8_t *text;
uint32_t textsz;
const uint8_t *data;
uint32_t datasz;
};
struct iwn_fw_info {
const uint8_t *data;
size_t size;
struct iwn_fw_part init;
struct iwn_fw_part main;
struct iwn_fw_part boot;
};
struct iwn_hal {
int (*load_firmware)(struct iwn_softc *);
void (*read_eeprom)(struct iwn_softc *);
int (*post_alive)(struct iwn_softc *);
int (*nic_config)(struct iwn_softc *);
void (*update_sched)(struct iwn_softc *, int, int, uint8_t,
uint16_t);
int (*get_temperature)(struct iwn_softc *);
int (*get_rssi)(struct iwn_softc *, struct iwn_rx_stat *);
int (*set_txpower)(struct iwn_softc *,
struct ieee80211_channel *, int);
int (*init_gains)(struct iwn_softc *);
int (*set_gains)(struct iwn_softc *);
int (*add_node)(struct iwn_softc *, struct iwn_node_info *,
int);
void (*tx_done)(struct iwn_softc *, struct iwn_rx_desc *,
struct iwn_rx_data *);
#if 0 /* HT */
void (*ampdu_tx_start)(struct iwn_softc *,
struct ieee80211_node *, uint8_t, uint16_t);
void (*ampdu_tx_stop)(struct iwn_softc *, uint8_t,
uint16_t);
#endif
int ntxqs;
int ndmachnls;
uint8_t broadcast_id;
int rxonsz;
int schedsz;
uint32_t fw_text_maxsz;
uint32_t fw_data_maxsz;
uint32_t fwsz;
bus_size_t sched_txfact_addr;
};
struct iwn_vap {
struct ieee80211vap iv_vap;
uint8_t iv_ridx;
int (*iv_newstate)(struct ieee80211vap *,
enum ieee80211_state, int);
};
#define IWN_VAP(_vap) ((struct iwn_vap *)(_vap))
struct iwn_softc {
struct ifnet *sc_ifp;
int sc_debug;
/* Locks */
struct mtx sc_mtx;
/* Bus */
device_t sc_dev;
int mem_rid;
int irq_rid;
struct resource *mem;
struct resource *irq;
u_int sc_flags;
#define IWN_FLAG_HAS_5GHZ (1 << 0)
#define IWN_FLAG_HAS_OTPROM (1 << 1)
#define IWN_FLAG_CALIB_DONE (1 << 2)
#define IWN_FLAG_USE_ICT (1 << 3)
#define IWN_FLAG_INTERNAL_PA (1 << 4)
uint8_t hw_type;
const struct iwn_hal *sc_hal;
const char *fwname;
const struct iwn_sensitivity_limits
*limits;
/* TX scheduler rings. */
struct iwn_dma_info sched_dma;
uint16_t *sched;
uint32_t sched_base;
/* "Keep Warm" page. */
struct iwn_dma_info kw_dma;
/* Firmware image. */
const struct firmware *fw_fp;
/* Firmware DMA transfer. */
struct iwn_dma_info fw_dma;
/* ICT table. */
struct iwn_dma_info ict_dma;
uint32_t *ict;
int ict_cur;
/* TX/RX rings. */
struct iwn_tx_ring txq[IWN5000_NTXQUEUES];
struct iwn_rx_ring rxq;
bus_space_tag_t sc_st;
bus_space_handle_t sc_sh;
void *sc_ih;
bus_size_t sc_sz;
int sc_cap_off; /* PCIe Capabilities. */
/* Tasks used by the driver */
struct task sc_reinit_task;
struct task sc_radioon_task;
struct task sc_radiooff_task;
int calib_cnt;
struct iwn_calib_state calib;
u_int calib_init;
u_int calib_runtime;
#define IWN_CALIB_XTAL (1 << IWN_CALIB_IDX_XTAL)
#define IWN_CALIB_DC (1 << IWN_CALIB_IDX_DC)
#define IWN_CALIB_LO (1 << IWN_CALIB_IDX_LO)
#define IWN_CALIB_TX_IQ (1 << IWN_CALIB_IDX_TX_IQ)
#define IWN_CALIB_TX_IQ_PERIODIC (1 << IWN_CALIB_IDX_TX_IQ_PERIODIC)
#define IWN_CALIB_BASE_BAND (1 << IWN_CALIB_IDX_BASE_BAND)
#define IWN_CALIB_NUM 6
struct iwn_calib_info calib_results[IWN_CALIB_NUM];
#define IWN_CALIB_IDX_XTAL 0
#define IWN_CALIB_IDX_DC 1
#define IWN_CALIB_IDX_LO 2
#define IWN_CALIB_IDX_TX_IQ 3
#define IWN_CALIB_IDX_TX_IQ_PERIODIC 4
#define IWN_CALIB_IDX_BASE_BAND 5
struct iwn_fw_info fw;
uint32_t errptr;
struct iwn_rx_stat last_rx_stat;
int last_rx_valid;
struct iwn_ucode_info ucode_info;
struct iwn_rxon rxon;
uint32_t rawtemp;
int temp;
int noise;
uint32_t qfullmsk;
uint32_t prom_base;
struct iwn4965_eeprom_band
bands[IWN_NBANDS];
struct iwn_eeprom_chan eeprom_channels[IWN_NBANDS][IWN_MAX_CHAN_PER_BAND];
uint16_t rfcfg;
uint8_t calib_ver;
char eeprom_domain[4];
int16_t eeprom_voltage;
int8_t maxpwr2GHz;
int8_t maxpwr5GHz;
int8_t maxpwr[IEEE80211_CHAN_MAX];
int8_t enh_maxpwr[35];
int32_t temp_off;
uint32_t int_mask;
uint8_t ntxchains;
uint8_t nrxchains;
uint8_t txchainmask;
uint8_t rxchainmask;
uint8_t chainmask;
struct callout sc_timer_to;
int sc_tx_timer;
struct iwn_rx_radiotap_header sc_rxtap;
struct iwn_tx_radiotap_header sc_txtap;
};
#define IWN_LOCK_INIT(_sc) \
mtx_init(&(_sc)->sc_mtx, device_get_nameunit((_sc)->sc_dev), \
MTX_NETWORK_LOCK, MTX_DEF)
#define IWN_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define IWN_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->sc_mtx, MA_OWNED)
#define IWN_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define IWN_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx)