freebsd-dev/sys/mips/rt305x/uart_dev_rt305x.h
Adrian Chadd f7a5c9d346 Import the initial CPU support for the MIPS RALink RT305x SoC.
This is a MIPS4KC CPU with various embedded peripherals, including
wireless and ethernet support.

This commit includes the platform, UART, ethernet MAC and GPIO support.
The interrupt-driven GPIO code is disabled for now pending GPIO changes
from the submitter.

Submitted by:	Aleksandr Rybalko <ray@dlink.ua>
2011-04-03 14:39:55 +00:00

127 lines
4.1 KiB
C

/*-
* Copyright (c) 2010 Aleksandr Rybalko.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The names of the authors may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _RT305XUART_H
#define _RT305XUART_H
#undef uart_getreg
#undef uart_setreg
#define uart_getreg(bas, reg) \
bus_space_read_4((bas)->bst, (bas)->bsh, reg)
#define uart_setreg(bas, reg, value) \
bus_space_write_4((bas)->bst, (bas)->bsh, reg, value)
/* UART registers */
#define UART_RX_REG 0x00
#define UART_TX_REG 0x04
#define UART_IER_REG 0x08
#define UART_IER_EDSSI (1<<3) /* Only full UART */
#define UART_IER_ELSI (1<<2)
#define UART_IER_ETBEI (1<<1)
#define UART_IER_ERBFI (1<<0)
#define UART_IIR_REG 0x0c
#define UART_IIR_RXFIFO (1<<7)
#define UART_IIR_TXFIFO (1<<6)
#define UART_IIR_ID_MST 0
#define UART_IIR_ID_THRE 1
#define UART_IIR_ID_DR 2
#define UART_IIR_ID_LINESTATUS 3
#define UART_IIR_ID_DR2 6
#define UART_IIR_ID_SHIFT 1
#define UART_IIR_ID_MASK 0x0000000e
#define UART_IIR_INTP (1<<0)
#define UART_FCR_REG 0x10
#define UART_FCR_RXTGR_1 (0<<6)
#define UART_FCR_RXTGR_4 (1<<6)
#define UART_FCR_RXTGR_8 (2<<6)
#define UART_FCR_RXTGR_12 (3<<6)
#define UART_FCR_TXTGR_1 (0<<4)
#define UART_FCR_TXTGR_4 (1<<4)
#define UART_FCR_TXTGR_8 (2<<4)
#define UART_FCR_TXTGR_12 (3<<4)
#define UART_FCR_DMA (1<<3)
#define UART_FCR_TXRST (1<<2)
#define UART_FCR_RXRST (1<<1)
#define UART_FCR_FIFOEN (1<<0)
#define UART_LCR_REG 0x14
#define UART_LCR_DLAB (1<<7)
#define UART_LCR_BRK (1<<6)
#define UART_LCR_FPAR (1<<5)
#define UART_LCR_EVEN (1<<4)
#define UART_LCR_PEN (1<<3)
#define UART_LCR_STB_15 (1<<2)
#define UART_LCR_5B 0
#define UART_LCR_6B 1
#define UART_LCR_7B 2
#define UART_LCR_8B 3
#define UART_MCR_REG 0x18
#define UART_MCR_LOOP (1<<4)
#define UART_MCR_OUT2_L (1<<3) /* Only full UART */
#define UART_MCR_OUT1_L (1<<2) /* Only full UART */
#define UART_MCR_RTS_L (1<<1) /* Only full UART */
#define UART_MCR_DTR_L (1<<0) /* Only full UART */
#define UART_LSR_REG 0x1c
#define UART_LSR_ERINF (1<<7)
#define UART_LSR_TEMT (1<<6)
#define UART_LSR_THRE (1<<5)
#define UART_LSR_BI (1<<4)
#define UART_LSR_FE (1<<3)
#define UART_LSR_PE (1<<2)
#define UART_LSR_OE (1<<1)
#define UART_LSR_DR (1<<0)
#define UART_MSR_REG 0x20 /* Only full UART */
#define UART_MSR_DCD (1<<7) /* Only full UART */
#define UART_MSR_RI (1<<6) /* Only full UART */
#define UART_MSR_DSR (1<<5) /* Only full UART */
#define UART_MSR_CTS (1<<4) /* Only full UART */
#define UART_MSR_DDCD (1<<3) /* Only full UART */
#define UART_MSR_TERI (1<<2) /* Only full UART */
#define UART_MSR_DDSR (1<<1) /* Only full UART */
#define UART_MSR_DCTS (1<<0) /* Only full UART */
#define UART_CDDL_REG 0x28
#define UART_CDDLL_REG 0x2c
#define UART_CDDLH_REG 0x30
#define UART_IFCTL_REG 0x34
#define UART_IFCTL_IFCTL (1<<0)
int uart_cnattach(void);
#endif /* _RT305XUART_H */