freebsd-dev/sys/opencrypto/crypto.c
John-Mark Gurney 08fca7a56b Add some new modes to OpenCrypto. These modes are AES-ICM (can be used
for counter mode), and AES-GCM.  Both of these modes have been added to
the aesni module.

Included is a set of tests to validate that the software and aesni
module calculate the correct values.  These use the NIST KAT test
vectors.  To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors.  Using a port
is necessary as the test vectors are around 25MB.

All the man pages were updated.  I have added a new man page, crypto.7,
which includes a description of how to use each mode.  All the new modes
and some other AES modes are present.  It would be good for someone
else to go through and document the other modes.

A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.

Add a timing safe bcmp for use to compare MACs.  Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.

Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place.  The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.

We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.

Obtained from:	p4: //depot/projects/opencrypto
Relnotes:	yes
Sponsored by:	FreeBSD Foundation
Sponsored by:	NetGate
2014-12-12 19:56:36 +00:00

1578 lines
40 KiB
C

/*-
* Copyright (c) 2002-2006 Sam Leffler. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Cryptographic Subsystem.
*
* This code is derived from the Openbsd Cryptographic Framework (OCF)
* that has the copyright shown below. Very little of the original
* code remains.
*/
/*-
* The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu)
*
* This code was written by Angelos D. Keromytis in Athens, Greece, in
* February 2000. Network Security Technologies Inc. (NSTI) kindly
* supported the development of this code.
*
* Copyright (c) 2000, 2001 Angelos D. Keromytis
*
* Permission to use, copy, and modify this software with or without fee
* is hereby granted, provided that this entire notice is included in
* all source code copies of any software which is or includes a copy or
* modification of this software.
*
* THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY
* REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
* MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
* PURPOSE.
*/
#define CRYPTO_TIMING /* enable timing support */
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/eventhandler.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/lock.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/malloc.h>
#include <sys/proc.h>
#include <sys/sdt.h>
#include <sys/sysctl.h>
#include <ddb/ddb.h>
#include <vm/uma.h>
#include <opencrypto/cryptodev.h>
#include <opencrypto/xform.h> /* XXX for M_XDATA */
#include <sys/kobj.h>
#include <sys/bus.h>
#include "cryptodev_if.h"
#if defined(__i386__) || defined(__amd64__)
#include <machine/pcb.h>
#endif
SDT_PROVIDER_DEFINE(opencrypto);
/*
* Crypto drivers register themselves by allocating a slot in the
* crypto_drivers table with crypto_get_driverid() and then registering
* each algorithm they support with crypto_register() and crypto_kregister().
*/
static struct mtx crypto_drivers_mtx; /* lock on driver table */
#define CRYPTO_DRIVER_LOCK() mtx_lock(&crypto_drivers_mtx)
#define CRYPTO_DRIVER_UNLOCK() mtx_unlock(&crypto_drivers_mtx)
#define CRYPTO_DRIVER_ASSERT() mtx_assert(&crypto_drivers_mtx, MA_OWNED)
/*
* Crypto device/driver capabilities structure.
*
* Synchronization:
* (d) - protected by CRYPTO_DRIVER_LOCK()
* (q) - protected by CRYPTO_Q_LOCK()
* Not tagged fields are read-only.
*/
struct cryptocap {
device_t cc_dev; /* (d) device/driver */
u_int32_t cc_sessions; /* (d) # of sessions */
u_int32_t cc_koperations; /* (d) # os asym operations */
/*
* Largest possible operator length (in bits) for each type of
* encryption algorithm. XXX not used
*/
u_int16_t cc_max_op_len[CRYPTO_ALGORITHM_MAX + 1];
u_int8_t cc_alg[CRYPTO_ALGORITHM_MAX + 1];
u_int8_t cc_kalg[CRK_ALGORITHM_MAX + 1];
int cc_flags; /* (d) flags */
#define CRYPTOCAP_F_CLEANUP 0x80000000 /* needs resource cleanup */
int cc_qblocked; /* (q) symmetric q blocked */
int cc_kqblocked; /* (q) asymmetric q blocked */
};
static struct cryptocap *crypto_drivers = NULL;
static int crypto_drivers_num = 0;
/*
* There are two queues for crypto requests; one for symmetric (e.g.
* cipher) operations and one for asymmetric (e.g. MOD)operations.
* A single mutex is used to lock access to both queues. We could
* have one per-queue but having one simplifies handling of block/unblock
* operations.
*/
static int crp_sleep = 0;
static TAILQ_HEAD(,cryptop) crp_q; /* request queues */
static TAILQ_HEAD(,cryptkop) crp_kq;
static struct mtx crypto_q_mtx;
#define CRYPTO_Q_LOCK() mtx_lock(&crypto_q_mtx)
#define CRYPTO_Q_UNLOCK() mtx_unlock(&crypto_q_mtx)
/*
* There are two queues for processing completed crypto requests; one
* for the symmetric and one for the asymmetric ops. We only need one
* but have two to avoid type futzing (cryptop vs. cryptkop). A single
* mutex is used to lock access to both queues. Note that this lock
* must be separate from the lock on request queues to insure driver
* callbacks don't generate lock order reversals.
*/
static TAILQ_HEAD(,cryptop) crp_ret_q; /* callback queues */
static TAILQ_HEAD(,cryptkop) crp_ret_kq;
static struct mtx crypto_ret_q_mtx;
#define CRYPTO_RETQ_LOCK() mtx_lock(&crypto_ret_q_mtx)
#define CRYPTO_RETQ_UNLOCK() mtx_unlock(&crypto_ret_q_mtx)
#define CRYPTO_RETQ_EMPTY() (TAILQ_EMPTY(&crp_ret_q) && TAILQ_EMPTY(&crp_ret_kq))
static uma_zone_t cryptop_zone;
static uma_zone_t cryptodesc_zone;
int crypto_userasymcrypto = 1; /* userland may do asym crypto reqs */
SYSCTL_INT(_kern, OID_AUTO, userasymcrypto, CTLFLAG_RW,
&crypto_userasymcrypto, 0,
"Enable/disable user-mode access to asymmetric crypto support");
int crypto_devallowsoft = 0; /* only use hardware crypto */
SYSCTL_INT(_kern, OID_AUTO, cryptodevallowsoft, CTLFLAG_RW,
&crypto_devallowsoft, 0,
"Enable/disable use of software crypto by /dev/crypto");
MALLOC_DEFINE(M_CRYPTO_DATA, "crypto", "crypto session records");
static void crypto_proc(void);
static struct proc *cryptoproc;
static void crypto_ret_proc(void);
static struct proc *cryptoretproc;
static void crypto_destroy(void);
static int crypto_invoke(struct cryptocap *cap, struct cryptop *crp, int hint);
static int crypto_kinvoke(struct cryptkop *krp, int flags);
static struct cryptostats cryptostats;
SYSCTL_STRUCT(_kern, OID_AUTO, crypto_stats, CTLFLAG_RW, &cryptostats,
cryptostats, "Crypto system statistics");
#ifdef CRYPTO_TIMING
static int crypto_timing = 0;
SYSCTL_INT(_debug, OID_AUTO, crypto_timing, CTLFLAG_RW,
&crypto_timing, 0, "Enable/disable crypto timing support");
#endif
static int
crypto_init(void)
{
int error;
mtx_init(&crypto_drivers_mtx, "crypto", "crypto driver table",
MTX_DEF|MTX_QUIET);
TAILQ_INIT(&crp_q);
TAILQ_INIT(&crp_kq);
mtx_init(&crypto_q_mtx, "crypto", "crypto op queues", MTX_DEF);
TAILQ_INIT(&crp_ret_q);
TAILQ_INIT(&crp_ret_kq);
mtx_init(&crypto_ret_q_mtx, "crypto", "crypto return queues", MTX_DEF);
cryptop_zone = uma_zcreate("cryptop", sizeof (struct cryptop),
0, 0, 0, 0,
UMA_ALIGN_PTR, UMA_ZONE_ZINIT);
cryptodesc_zone = uma_zcreate("cryptodesc", sizeof (struct cryptodesc),
0, 0, 0, 0,
UMA_ALIGN_PTR, UMA_ZONE_ZINIT);
if (cryptodesc_zone == NULL || cryptop_zone == NULL) {
printf("crypto_init: cannot setup crypto zones\n");
error = ENOMEM;
goto bad;
}
crypto_drivers_num = CRYPTO_DRIVERS_INITIAL;
crypto_drivers = malloc(crypto_drivers_num *
sizeof(struct cryptocap), M_CRYPTO_DATA, M_NOWAIT | M_ZERO);
if (crypto_drivers == NULL) {
printf("crypto_init: cannot setup crypto drivers\n");
error = ENOMEM;
goto bad;
}
error = kproc_create((void (*)(void *)) crypto_proc, NULL,
&cryptoproc, 0, 0, "crypto");
if (error) {
printf("crypto_init: cannot start crypto thread; error %d",
error);
goto bad;
}
error = kproc_create((void (*)(void *)) crypto_ret_proc, NULL,
&cryptoretproc, 0, 0, "crypto returns");
if (error) {
printf("crypto_init: cannot start cryptoret thread; error %d",
error);
goto bad;
}
return 0;
bad:
crypto_destroy();
return error;
}
/*
* Signal a crypto thread to terminate. We use the driver
* table lock to synchronize the sleep/wakeups so that we
* are sure the threads have terminated before we release
* the data structures they use. See crypto_finis below
* for the other half of this song-and-dance.
*/
static void
crypto_terminate(struct proc **pp, void *q)
{
struct proc *p;
mtx_assert(&crypto_drivers_mtx, MA_OWNED);
p = *pp;
*pp = NULL;
if (p) {
wakeup_one(q);
PROC_LOCK(p); /* NB: insure we don't miss wakeup */
CRYPTO_DRIVER_UNLOCK(); /* let crypto_finis progress */
msleep(p, &p->p_mtx, PWAIT, "crypto_destroy", 0);
PROC_UNLOCK(p);
CRYPTO_DRIVER_LOCK();
}
}
static void
crypto_destroy(void)
{
/*
* Terminate any crypto threads.
*/
CRYPTO_DRIVER_LOCK();
crypto_terminate(&cryptoproc, &crp_q);
crypto_terminate(&cryptoretproc, &crp_ret_q);
CRYPTO_DRIVER_UNLOCK();
/* XXX flush queues??? */
/*
* Reclaim dynamically allocated resources.
*/
if (crypto_drivers != NULL)
free(crypto_drivers, M_CRYPTO_DATA);
if (cryptodesc_zone != NULL)
uma_zdestroy(cryptodesc_zone);
if (cryptop_zone != NULL)
uma_zdestroy(cryptop_zone);
mtx_destroy(&crypto_q_mtx);
mtx_destroy(&crypto_ret_q_mtx);
mtx_destroy(&crypto_drivers_mtx);
}
static struct cryptocap *
crypto_checkdriver(u_int32_t hid)
{
if (crypto_drivers == NULL)
return NULL;
return (hid >= crypto_drivers_num ? NULL : &crypto_drivers[hid]);
}
/*
* Compare a driver's list of supported algorithms against another
* list; return non-zero if all algorithms are supported.
*/
static int
driver_suitable(const struct cryptocap *cap, const struct cryptoini *cri)
{
const struct cryptoini *cr;
/* See if all the algorithms are supported. */
for (cr = cri; cr; cr = cr->cri_next)
if (cap->cc_alg[cr->cri_alg] == 0)
return 0;
return 1;
}
/*
* Select a driver for a new session that supports the specified
* algorithms and, optionally, is constrained according to the flags.
* The algorithm we use here is pretty stupid; just use the
* first driver that supports all the algorithms we need. If there
* are multiple drivers we choose the driver with the fewest active
* sessions. We prefer hardware-backed drivers to software ones.
*
* XXX We need more smarts here (in real life too, but that's
* XXX another story altogether).
*/
static struct cryptocap *
crypto_select_driver(const struct cryptoini *cri, int flags)
{
struct cryptocap *cap, *best;
int match, hid;
CRYPTO_DRIVER_ASSERT();
/*
* Look first for hardware crypto devices if permitted.
*/
if (flags & CRYPTOCAP_F_HARDWARE)
match = CRYPTOCAP_F_HARDWARE;
else
match = CRYPTOCAP_F_SOFTWARE;
best = NULL;
again:
for (hid = 0; hid < crypto_drivers_num; hid++) {
cap = &crypto_drivers[hid];
/*
* If it's not initialized, is in the process of
* going away, or is not appropriate (hardware
* or software based on match), then skip.
*/
if (cap->cc_dev == NULL ||
(cap->cc_flags & CRYPTOCAP_F_CLEANUP) ||
(cap->cc_flags & match) == 0)
continue;
/* verify all the algorithms are supported. */
if (driver_suitable(cap, cri)) {
if (best == NULL ||
cap->cc_sessions < best->cc_sessions)
best = cap;
}
}
if (best == NULL && match == CRYPTOCAP_F_HARDWARE &&
(flags & CRYPTOCAP_F_SOFTWARE)) {
/* sort of an Algol 68-style for loop */
match = CRYPTOCAP_F_SOFTWARE;
goto again;
}
return best;
}
/*
* Create a new session. The crid argument specifies a crypto
* driver to use or constraints on a driver to select (hardware
* only, software only, either). Whatever driver is selected
* must be capable of the requested crypto algorithms.
*/
int
crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int crid)
{
struct cryptocap *cap;
u_int32_t hid, lid;
int err;
CRYPTO_DRIVER_LOCK();
if ((crid & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) {
/*
* Use specified driver; verify it is capable.
*/
cap = crypto_checkdriver(crid);
if (cap != NULL && !driver_suitable(cap, cri))
cap = NULL;
} else {
/*
* No requested driver; select based on crid flags.
*/
cap = crypto_select_driver(cri, crid);
/*
* if NULL then can't do everything in one session.
* XXX Fix this. We need to inject a "virtual" session
* XXX layer right about here.
*/
}
if (cap != NULL) {
/* Call the driver initialization routine. */
hid = cap - crypto_drivers;
lid = hid; /* Pass the driver ID. */
err = CRYPTODEV_NEWSESSION(cap->cc_dev, &lid, cri);
if (err == 0) {
(*sid) = (cap->cc_flags & 0xff000000)
| (hid & 0x00ffffff);
(*sid) <<= 32;
(*sid) |= (lid & 0xffffffff);
cap->cc_sessions++;
} else
CRYPTDEB("dev newsession failed");
} else {
CRYPTDEB("no driver");
err = EINVAL;
}
CRYPTO_DRIVER_UNLOCK();
return err;
}
static void
crypto_remove(struct cryptocap *cap)
{
mtx_assert(&crypto_drivers_mtx, MA_OWNED);
if (cap->cc_sessions == 0 && cap->cc_koperations == 0)
bzero(cap, sizeof(*cap));
}
/*
* Delete an existing session (or a reserved session on an unregistered
* driver).
*/
int
crypto_freesession(u_int64_t sid)
{
struct cryptocap *cap;
u_int32_t hid;
int err;
CRYPTO_DRIVER_LOCK();
if (crypto_drivers == NULL) {
err = EINVAL;
goto done;
}
/* Determine two IDs. */
hid = CRYPTO_SESID2HID(sid);
if (hid >= crypto_drivers_num) {
err = ENOENT;
goto done;
}
cap = &crypto_drivers[hid];
if (cap->cc_sessions)
cap->cc_sessions--;
/* Call the driver cleanup routine, if available. */
err = CRYPTODEV_FREESESSION(cap->cc_dev, sid);
if (cap->cc_flags & CRYPTOCAP_F_CLEANUP)
crypto_remove(cap);
done:
CRYPTO_DRIVER_UNLOCK();
return err;
}
/*
* Return an unused driver id. Used by drivers prior to registering
* support for the algorithms they handle.
*/
int32_t
crypto_get_driverid(device_t dev, int flags)
{
struct cryptocap *newdrv;
int i;
if ((flags & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) {
printf("%s: no flags specified when registering driver\n",
device_get_nameunit(dev));
return -1;
}
CRYPTO_DRIVER_LOCK();
for (i = 0; i < crypto_drivers_num; i++) {
if (crypto_drivers[i].cc_dev == NULL &&
(crypto_drivers[i].cc_flags & CRYPTOCAP_F_CLEANUP) == 0) {
break;
}
}
/* Out of entries, allocate some more. */
if (i == crypto_drivers_num) {
/* Be careful about wrap-around. */
if (2 * crypto_drivers_num <= crypto_drivers_num) {
CRYPTO_DRIVER_UNLOCK();
printf("crypto: driver count wraparound!\n");
return -1;
}
newdrv = malloc(2 * crypto_drivers_num *
sizeof(struct cryptocap), M_CRYPTO_DATA, M_NOWAIT|M_ZERO);
if (newdrv == NULL) {
CRYPTO_DRIVER_UNLOCK();
printf("crypto: no space to expand driver table!\n");
return -1;
}
bcopy(crypto_drivers, newdrv,
crypto_drivers_num * sizeof(struct cryptocap));
crypto_drivers_num *= 2;
free(crypto_drivers, M_CRYPTO_DATA);
crypto_drivers = newdrv;
}
/* NB: state is zero'd on free */
crypto_drivers[i].cc_sessions = 1; /* Mark */
crypto_drivers[i].cc_dev = dev;
crypto_drivers[i].cc_flags = flags;
if (bootverbose)
printf("crypto: assign %s driver id %u, flags %u\n",
device_get_nameunit(dev), i, flags);
CRYPTO_DRIVER_UNLOCK();
return i;
}
/*
* Lookup a driver by name. We match against the full device
* name and unit, and against just the name. The latter gives
* us a simple widlcarding by device name. On success return the
* driver/hardware identifier; otherwise return -1.
*/
int
crypto_find_driver(const char *match)
{
int i, len = strlen(match);
CRYPTO_DRIVER_LOCK();
for (i = 0; i < crypto_drivers_num; i++) {
device_t dev = crypto_drivers[i].cc_dev;
if (dev == NULL ||
(crypto_drivers[i].cc_flags & CRYPTOCAP_F_CLEANUP))
continue;
if (strncmp(match, device_get_nameunit(dev), len) == 0 ||
strncmp(match, device_get_name(dev), len) == 0)
break;
}
CRYPTO_DRIVER_UNLOCK();
return i < crypto_drivers_num ? i : -1;
}
/*
* Return the device_t for the specified driver or NULL
* if the driver identifier is invalid.
*/
device_t
crypto_find_device_byhid(int hid)
{
struct cryptocap *cap = crypto_checkdriver(hid);
return cap != NULL ? cap->cc_dev : NULL;
}
/*
* Return the device/driver capabilities.
*/
int
crypto_getcaps(int hid)
{
struct cryptocap *cap = crypto_checkdriver(hid);
return cap != NULL ? cap->cc_flags : 0;
}
/*
* Register support for a key-related algorithm. This routine
* is called once for each algorithm supported a driver.
*/
int
crypto_kregister(u_int32_t driverid, int kalg, u_int32_t flags)
{
struct cryptocap *cap;
int err;
CRYPTO_DRIVER_LOCK();
cap = crypto_checkdriver(driverid);
if (cap != NULL &&
(CRK_ALGORITM_MIN <= kalg && kalg <= CRK_ALGORITHM_MAX)) {
/*
* XXX Do some performance testing to determine placing.
* XXX We probably need an auxiliary data structure that
* XXX describes relative performances.
*/
cap->cc_kalg[kalg] = flags | CRYPTO_ALG_FLAG_SUPPORTED;
if (bootverbose)
printf("crypto: %s registers key alg %u flags %u\n"
, device_get_nameunit(cap->cc_dev)
, kalg
, flags
);
err = 0;
} else
err = EINVAL;
CRYPTO_DRIVER_UNLOCK();
return err;
}
/*
* Register support for a non-key-related algorithm. This routine
* is called once for each such algorithm supported by a driver.
*/
int
crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen,
u_int32_t flags)
{
struct cryptocap *cap;
int err;
CRYPTO_DRIVER_LOCK();
cap = crypto_checkdriver(driverid);
/* NB: algorithms are in the range [1..max] */
if (cap != NULL &&
(CRYPTO_ALGORITHM_MIN <= alg && alg <= CRYPTO_ALGORITHM_MAX)) {
/*
* XXX Do some performance testing to determine placing.
* XXX We probably need an auxiliary data structure that
* XXX describes relative performances.
*/
cap->cc_alg[alg] = flags | CRYPTO_ALG_FLAG_SUPPORTED;
cap->cc_max_op_len[alg] = maxoplen;
if (bootverbose)
printf("crypto: %s registers alg %u flags %u maxoplen %u\n"
, device_get_nameunit(cap->cc_dev)
, alg
, flags
, maxoplen
);
cap->cc_sessions = 0; /* Unmark */
err = 0;
} else
err = EINVAL;
CRYPTO_DRIVER_UNLOCK();
return err;
}
static void
driver_finis(struct cryptocap *cap)
{
u_int32_t ses, kops;
CRYPTO_DRIVER_ASSERT();
ses = cap->cc_sessions;
kops = cap->cc_koperations;
bzero(cap, sizeof(*cap));
if (ses != 0 || kops != 0) {
/*
* If there are pending sessions,
* just mark as invalid.
*/
cap->cc_flags |= CRYPTOCAP_F_CLEANUP;
cap->cc_sessions = ses;
cap->cc_koperations = kops;
}
}
/*
* Unregister a crypto driver. If there are pending sessions using it,
* leave enough information around so that subsequent calls using those
* sessions will correctly detect the driver has been unregistered and
* reroute requests.
*/
int
crypto_unregister(u_int32_t driverid, int alg)
{
struct cryptocap *cap;
int i, err;
CRYPTO_DRIVER_LOCK();
cap = crypto_checkdriver(driverid);
if (cap != NULL &&
(CRYPTO_ALGORITHM_MIN <= alg && alg <= CRYPTO_ALGORITHM_MAX) &&
cap->cc_alg[alg] != 0) {
cap->cc_alg[alg] = 0;
cap->cc_max_op_len[alg] = 0;
/* Was this the last algorithm ? */
for (i = 1; i <= CRYPTO_ALGORITHM_MAX; i++)
if (cap->cc_alg[i] != 0)
break;
if (i == CRYPTO_ALGORITHM_MAX + 1)
driver_finis(cap);
err = 0;
} else
err = EINVAL;
CRYPTO_DRIVER_UNLOCK();
return err;
}
/*
* Unregister all algorithms associated with a crypto driver.
* If there are pending sessions using it, leave enough information
* around so that subsequent calls using those sessions will
* correctly detect the driver has been unregistered and reroute
* requests.
*/
int
crypto_unregister_all(u_int32_t driverid)
{
struct cryptocap *cap;
int err;
CRYPTO_DRIVER_LOCK();
cap = crypto_checkdriver(driverid);
if (cap != NULL) {
driver_finis(cap);
err = 0;
} else
err = EINVAL;
CRYPTO_DRIVER_UNLOCK();
return err;
}
/*
* Clear blockage on a driver. The what parameter indicates whether
* the driver is now ready for cryptop's and/or cryptokop's.
*/
int
crypto_unblock(u_int32_t driverid, int what)
{
struct cryptocap *cap;
int err;
CRYPTO_Q_LOCK();
cap = crypto_checkdriver(driverid);
if (cap != NULL) {
if (what & CRYPTO_SYMQ)
cap->cc_qblocked = 0;
if (what & CRYPTO_ASYMQ)
cap->cc_kqblocked = 0;
if (crp_sleep)
wakeup_one(&crp_q);
err = 0;
} else
err = EINVAL;
CRYPTO_Q_UNLOCK();
return err;
}
/*
* Add a crypto request to a queue, to be processed by the kernel thread.
*/
int
crypto_dispatch(struct cryptop *crp)
{
struct cryptocap *cap;
u_int32_t hid;
int result;
cryptostats.cs_ops++;
#ifdef CRYPTO_TIMING
if (crypto_timing)
binuptime(&crp->crp_tstamp);
#endif
hid = CRYPTO_SESID2HID(crp->crp_sid);
if ((crp->crp_flags & CRYPTO_F_BATCH) == 0) {
/*
* Caller marked the request to be processed
* immediately; dispatch it directly to the
* driver unless the driver is currently blocked.
*/
cap = crypto_checkdriver(hid);
/* Driver cannot disappeared when there is an active session. */
KASSERT(cap != NULL, ("%s: Driver disappeared.", __func__));
if (!cap->cc_qblocked) {
result = crypto_invoke(cap, crp, 0);
if (result != ERESTART)
return (result);
/*
* The driver ran out of resources, put the request on
* the queue.
*/
}
}
CRYPTO_Q_LOCK();
TAILQ_INSERT_TAIL(&crp_q, crp, crp_next);
if (crp_sleep)
wakeup_one(&crp_q);
CRYPTO_Q_UNLOCK();
return 0;
}
/*
* Add an asymetric crypto request to a queue,
* to be processed by the kernel thread.
*/
int
crypto_kdispatch(struct cryptkop *krp)
{
int error;
cryptostats.cs_kops++;
error = crypto_kinvoke(krp, krp->krp_crid);
if (error == ERESTART) {
CRYPTO_Q_LOCK();
TAILQ_INSERT_TAIL(&crp_kq, krp, krp_next);
if (crp_sleep)
wakeup_one(&crp_q);
CRYPTO_Q_UNLOCK();
error = 0;
}
return error;
}
/*
* Verify a driver is suitable for the specified operation.
*/
static __inline int
kdriver_suitable(const struct cryptocap *cap, const struct cryptkop *krp)
{
return (cap->cc_kalg[krp->krp_op] & CRYPTO_ALG_FLAG_SUPPORTED) != 0;
}
/*
* Select a driver for an asym operation. The driver must
* support the necessary algorithm. The caller can constrain
* which device is selected with the flags parameter. The
* algorithm we use here is pretty stupid; just use the first
* driver that supports the algorithms we need. If there are
* multiple suitable drivers we choose the driver with the
* fewest active operations. We prefer hardware-backed
* drivers to software ones when either may be used.
*/
static struct cryptocap *
crypto_select_kdriver(const struct cryptkop *krp, int flags)
{
struct cryptocap *cap, *best, *blocked;
int match, hid;
CRYPTO_DRIVER_ASSERT();
/*
* Look first for hardware crypto devices if permitted.
*/
if (flags & CRYPTOCAP_F_HARDWARE)
match = CRYPTOCAP_F_HARDWARE;
else
match = CRYPTOCAP_F_SOFTWARE;
best = NULL;
blocked = NULL;
again:
for (hid = 0; hid < crypto_drivers_num; hid++) {
cap = &crypto_drivers[hid];
/*
* If it's not initialized, is in the process of
* going away, or is not appropriate (hardware
* or software based on match), then skip.
*/
if (cap->cc_dev == NULL ||
(cap->cc_flags & CRYPTOCAP_F_CLEANUP) ||
(cap->cc_flags & match) == 0)
continue;
/* verify all the algorithms are supported. */
if (kdriver_suitable(cap, krp)) {
if (best == NULL ||
cap->cc_koperations < best->cc_koperations)
best = cap;
}
}
if (best != NULL)
return best;
if (match == CRYPTOCAP_F_HARDWARE && (flags & CRYPTOCAP_F_SOFTWARE)) {
/* sort of an Algol 68-style for loop */
match = CRYPTOCAP_F_SOFTWARE;
goto again;
}
return best;
}
/*
* Dispatch an assymetric crypto request.
*/
static int
crypto_kinvoke(struct cryptkop *krp, int crid)
{
struct cryptocap *cap = NULL;
int error;
KASSERT(krp != NULL, ("%s: krp == NULL", __func__));
KASSERT(krp->krp_callback != NULL,
("%s: krp->crp_callback == NULL", __func__));
CRYPTO_DRIVER_LOCK();
if ((crid & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) {
cap = crypto_checkdriver(crid);
if (cap != NULL) {
/*
* Driver present, it must support the necessary
* algorithm and, if s/w drivers are excluded,
* it must be registered as hardware-backed.
*/
if (!kdriver_suitable(cap, krp) ||
(!crypto_devallowsoft &&
(cap->cc_flags & CRYPTOCAP_F_HARDWARE) == 0))
cap = NULL;
}
} else {
/*
* No requested driver; select based on crid flags.
*/
if (!crypto_devallowsoft) /* NB: disallow s/w drivers */
crid &= ~CRYPTOCAP_F_SOFTWARE;
cap = crypto_select_kdriver(krp, crid);
}
if (cap != NULL && !cap->cc_kqblocked) {
krp->krp_hid = cap - crypto_drivers;
cap->cc_koperations++;
CRYPTO_DRIVER_UNLOCK();
error = CRYPTODEV_KPROCESS(cap->cc_dev, krp, 0);
CRYPTO_DRIVER_LOCK();
if (error == ERESTART) {
cap->cc_koperations--;
CRYPTO_DRIVER_UNLOCK();
return (error);
}
} else {
/*
* NB: cap is !NULL if device is blocked; in
* that case return ERESTART so the operation
* is resubmitted if possible.
*/
error = (cap == NULL) ? ENODEV : ERESTART;
}
CRYPTO_DRIVER_UNLOCK();
if (error) {
krp->krp_status = error;
crypto_kdone(krp);
}
return 0;
}
#ifdef CRYPTO_TIMING
static void
crypto_tstat(struct cryptotstat *ts, struct bintime *bt)
{
struct bintime now, delta;
struct timespec t;
uint64_t u;
binuptime(&now);
u = now.frac;
delta.frac = now.frac - bt->frac;
delta.sec = now.sec - bt->sec;
if (u < delta.frac)
delta.sec--;
bintime2timespec(&delta, &t);
timespecadd(&ts->acc, &t);
if (timespeccmp(&t, &ts->min, <))
ts->min = t;
if (timespeccmp(&t, &ts->max, >))
ts->max = t;
ts->count++;
*bt = now;
}
#endif
/*
* Dispatch a crypto request to the appropriate crypto devices.
*/
static int
crypto_invoke(struct cryptocap *cap, struct cryptop *crp, int hint)
{
KASSERT(crp != NULL, ("%s: crp == NULL", __func__));
KASSERT(crp->crp_callback != NULL,
("%s: crp->crp_callback == NULL", __func__));
KASSERT(crp->crp_desc != NULL, ("%s: crp->crp_desc == NULL", __func__));
#ifdef CRYPTO_TIMING
if (crypto_timing)
crypto_tstat(&cryptostats.cs_invoke, &crp->crp_tstamp);
#endif
if (cap->cc_flags & CRYPTOCAP_F_CLEANUP) {
struct cryptodesc *crd;
u_int64_t nid;
/*
* Driver has unregistered; migrate the session and return
* an error to the caller so they'll resubmit the op.
*
* XXX: What if there are more already queued requests for this
* session?
*/
crypto_freesession(crp->crp_sid);
for (crd = crp->crp_desc; crd->crd_next; crd = crd->crd_next)
crd->CRD_INI.cri_next = &(crd->crd_next->CRD_INI);
/* XXX propagate flags from initial session? */
if (crypto_newsession(&nid, &(crp->crp_desc->CRD_INI),
CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE) == 0)
crp->crp_sid = nid;
crp->crp_etype = EAGAIN;
crypto_done(crp);
return 0;
} else {
/*
* Invoke the driver to process the request.
*/
return CRYPTODEV_PROCESS(cap->cc_dev, crp, hint);
}
}
/*
* Release a set of crypto descriptors.
*/
void
crypto_freereq(struct cryptop *crp)
{
struct cryptodesc *crd;
if (crp == NULL)
return;
#ifdef DIAGNOSTIC
{
struct cryptop *crp2;
CRYPTO_Q_LOCK();
TAILQ_FOREACH(crp2, &crp_q, crp_next) {
KASSERT(crp2 != crp,
("Freeing cryptop from the crypto queue (%p).",
crp));
}
CRYPTO_Q_UNLOCK();
CRYPTO_RETQ_LOCK();
TAILQ_FOREACH(crp2, &crp_ret_q, crp_next) {
KASSERT(crp2 != crp,
("Freeing cryptop from the return queue (%p).",
crp));
}
CRYPTO_RETQ_UNLOCK();
}
#endif
while ((crd = crp->crp_desc) != NULL) {
crp->crp_desc = crd->crd_next;
uma_zfree(cryptodesc_zone, crd);
}
uma_zfree(cryptop_zone, crp);
}
/*
* Acquire a set of crypto descriptors.
*/
struct cryptop *
crypto_getreq(int num)
{
struct cryptodesc *crd;
struct cryptop *crp;
crp = uma_zalloc(cryptop_zone, M_NOWAIT|M_ZERO);
if (crp != NULL) {
while (num--) {
crd = uma_zalloc(cryptodesc_zone, M_NOWAIT|M_ZERO);
if (crd == NULL) {
crypto_freereq(crp);
return NULL;
}
crd->crd_next = crp->crp_desc;
crp->crp_desc = crd;
}
}
return crp;
}
/*
* Invoke the callback on behalf of the driver.
*/
void
crypto_done(struct cryptop *crp)
{
KASSERT((crp->crp_flags & CRYPTO_F_DONE) == 0,
("crypto_done: op already done, flags 0x%x", crp->crp_flags));
crp->crp_flags |= CRYPTO_F_DONE;
if (crp->crp_etype != 0)
cryptostats.cs_errs++;
#ifdef CRYPTO_TIMING
if (crypto_timing)
crypto_tstat(&cryptostats.cs_done, &crp->crp_tstamp);
#endif
/*
* CBIMM means unconditionally do the callback immediately;
* CBIFSYNC means do the callback immediately only if the
* operation was done synchronously. Both are used to avoid
* doing extraneous context switches; the latter is mostly
* used with the software crypto driver.
*/
if ((crp->crp_flags & CRYPTO_F_CBIMM) ||
((crp->crp_flags & CRYPTO_F_CBIFSYNC) &&
(CRYPTO_SESID2CAPS(crp->crp_sid) & CRYPTOCAP_F_SYNC))) {
/*
* Do the callback directly. This is ok when the
* callback routine does very little (e.g. the
* /dev/crypto callback method just does a wakeup).
*/
#ifdef CRYPTO_TIMING
if (crypto_timing) {
/*
* NB: We must copy the timestamp before
* doing the callback as the cryptop is
* likely to be reclaimed.
*/
struct bintime t = crp->crp_tstamp;
crypto_tstat(&cryptostats.cs_cb, &t);
crp->crp_callback(crp);
crypto_tstat(&cryptostats.cs_finis, &t);
} else
#endif
crp->crp_callback(crp);
} else {
/*
* Normal case; queue the callback for the thread.
*/
CRYPTO_RETQ_LOCK();
if (CRYPTO_RETQ_EMPTY())
wakeup_one(&crp_ret_q); /* shared wait channel */
TAILQ_INSERT_TAIL(&crp_ret_q, crp, crp_next);
CRYPTO_RETQ_UNLOCK();
}
}
/*
* Invoke the callback on behalf of the driver.
*/
void
crypto_kdone(struct cryptkop *krp)
{
struct cryptocap *cap;
if (krp->krp_status != 0)
cryptostats.cs_kerrs++;
CRYPTO_DRIVER_LOCK();
/* XXX: What if driver is loaded in the meantime? */
if (krp->krp_hid < crypto_drivers_num) {
cap = &crypto_drivers[krp->krp_hid];
cap->cc_koperations--;
KASSERT(cap->cc_koperations >= 0, ("cc_koperations < 0"));
if (cap->cc_flags & CRYPTOCAP_F_CLEANUP)
crypto_remove(cap);
}
CRYPTO_DRIVER_UNLOCK();
CRYPTO_RETQ_LOCK();
if (CRYPTO_RETQ_EMPTY())
wakeup_one(&crp_ret_q); /* shared wait channel */
TAILQ_INSERT_TAIL(&crp_ret_kq, krp, krp_next);
CRYPTO_RETQ_UNLOCK();
}
int
crypto_getfeat(int *featp)
{
int hid, kalg, feat = 0;
CRYPTO_DRIVER_LOCK();
for (hid = 0; hid < crypto_drivers_num; hid++) {
const struct cryptocap *cap = &crypto_drivers[hid];
if ((cap->cc_flags & CRYPTOCAP_F_SOFTWARE) &&
!crypto_devallowsoft) {
continue;
}
for (kalg = 0; kalg < CRK_ALGORITHM_MAX; kalg++)
if (cap->cc_kalg[kalg] & CRYPTO_ALG_FLAG_SUPPORTED)
feat |= 1 << kalg;
}
CRYPTO_DRIVER_UNLOCK();
*featp = feat;
return (0);
}
/*
* Terminate a thread at module unload. The process that
* initiated this is waiting for us to signal that we're gone;
* wake it up and exit. We use the driver table lock to insure
* we don't do the wakeup before they're waiting. There is no
* race here because the waiter sleeps on the proc lock for the
* thread so it gets notified at the right time because of an
* extra wakeup that's done in exit1().
*/
static void
crypto_finis(void *chan)
{
CRYPTO_DRIVER_LOCK();
wakeup_one(chan);
CRYPTO_DRIVER_UNLOCK();
kproc_exit(0);
}
/*
* Crypto thread, dispatches crypto requests.
*/
static void
crypto_proc(void)
{
struct cryptop *crp, *submit;
struct cryptkop *krp;
struct cryptocap *cap;
u_int32_t hid;
int result, hint;
#if defined(__i386__) || defined(__amd64__)
fpu_kern_thread(FPU_KERN_NORMAL);
#endif
CRYPTO_Q_LOCK();
for (;;) {
/*
* Find the first element in the queue that can be
* processed and look-ahead to see if multiple ops
* are ready for the same driver.
*/
submit = NULL;
hint = 0;
TAILQ_FOREACH(crp, &crp_q, crp_next) {
hid = CRYPTO_SESID2HID(crp->crp_sid);
cap = crypto_checkdriver(hid);
/*
* Driver cannot disappeared when there is an active
* session.
*/
KASSERT(cap != NULL, ("%s:%u Driver disappeared.",
__func__, __LINE__));
if (cap == NULL || cap->cc_dev == NULL) {
/* Op needs to be migrated, process it. */
if (submit == NULL)
submit = crp;
break;
}
if (!cap->cc_qblocked) {
if (submit != NULL) {
/*
* We stop on finding another op,
* regardless whether its for the same
* driver or not. We could keep
* searching the queue but it might be
* better to just use a per-driver
* queue instead.
*/
if (CRYPTO_SESID2HID(submit->crp_sid) == hid)
hint = CRYPTO_HINT_MORE;
break;
} else {
submit = crp;
if ((submit->crp_flags & CRYPTO_F_BATCH) == 0)
break;
/* keep scanning for more are q'd */
}
}
}
if (submit != NULL) {
TAILQ_REMOVE(&crp_q, submit, crp_next);
hid = CRYPTO_SESID2HID(submit->crp_sid);
cap = crypto_checkdriver(hid);
KASSERT(cap != NULL, ("%s:%u Driver disappeared.",
__func__, __LINE__));
result = crypto_invoke(cap, submit, hint);
if (result == ERESTART) {
/*
* The driver ran out of resources, mark the
* driver ``blocked'' for cryptop's and put
* the request back in the queue. It would
* best to put the request back where we got
* it but that's hard so for now we put it
* at the front. This should be ok; putting
* it at the end does not work.
*/
/* XXX validate sid again? */
crypto_drivers[CRYPTO_SESID2HID(submit->crp_sid)].cc_qblocked = 1;
TAILQ_INSERT_HEAD(&crp_q, submit, crp_next);
cryptostats.cs_blocks++;
}
}
/* As above, but for key ops */
TAILQ_FOREACH(krp, &crp_kq, krp_next) {
cap = crypto_checkdriver(krp->krp_hid);
if (cap == NULL || cap->cc_dev == NULL) {
/*
* Operation needs to be migrated, invalidate
* the assigned device so it will reselect a
* new one below. Propagate the original
* crid selection flags if supplied.
*/
krp->krp_hid = krp->krp_crid &
(CRYPTOCAP_F_SOFTWARE|CRYPTOCAP_F_HARDWARE);
if (krp->krp_hid == 0)
krp->krp_hid =
CRYPTOCAP_F_SOFTWARE|CRYPTOCAP_F_HARDWARE;
break;
}
if (!cap->cc_kqblocked)
break;
}
if (krp != NULL) {
TAILQ_REMOVE(&crp_kq, krp, krp_next);
result = crypto_kinvoke(krp, krp->krp_hid);
if (result == ERESTART) {
/*
* The driver ran out of resources, mark the
* driver ``blocked'' for cryptkop's and put
* the request back in the queue. It would
* best to put the request back where we got
* it but that's hard so for now we put it
* at the front. This should be ok; putting
* it at the end does not work.
*/
/* XXX validate sid again? */
crypto_drivers[krp->krp_hid].cc_kqblocked = 1;
TAILQ_INSERT_HEAD(&crp_kq, krp, krp_next);
cryptostats.cs_kblocks++;
}
}
if (submit == NULL && krp == NULL) {
/*
* Nothing more to be processed. Sleep until we're
* woken because there are more ops to process.
* This happens either by submission or by a driver
* becoming unblocked and notifying us through
* crypto_unblock. Note that when we wakeup we
* start processing each queue again from the
* front. It's not clear that it's important to
* preserve this ordering since ops may finish
* out of order if dispatched to different devices
* and some become blocked while others do not.
*/
crp_sleep = 1;
msleep(&crp_q, &crypto_q_mtx, PWAIT, "crypto_wait", 0);
crp_sleep = 0;
if (cryptoproc == NULL)
break;
cryptostats.cs_intrs++;
}
}
CRYPTO_Q_UNLOCK();
crypto_finis(&crp_q);
}
/*
* Crypto returns thread, does callbacks for processed crypto requests.
* Callbacks are done here, rather than in the crypto drivers, because
* callbacks typically are expensive and would slow interrupt handling.
*/
static void
crypto_ret_proc(void)
{
struct cryptop *crpt;
struct cryptkop *krpt;
CRYPTO_RETQ_LOCK();
for (;;) {
/* Harvest return q's for completed ops */
crpt = TAILQ_FIRST(&crp_ret_q);
if (crpt != NULL)
TAILQ_REMOVE(&crp_ret_q, crpt, crp_next);
krpt = TAILQ_FIRST(&crp_ret_kq);
if (krpt != NULL)
TAILQ_REMOVE(&crp_ret_kq, krpt, krp_next);
if (crpt != NULL || krpt != NULL) {
CRYPTO_RETQ_UNLOCK();
/*
* Run callbacks unlocked.
*/
if (crpt != NULL) {
#ifdef CRYPTO_TIMING
if (crypto_timing) {
/*
* NB: We must copy the timestamp before
* doing the callback as the cryptop is
* likely to be reclaimed.
*/
struct bintime t = crpt->crp_tstamp;
crypto_tstat(&cryptostats.cs_cb, &t);
crpt->crp_callback(crpt);
crypto_tstat(&cryptostats.cs_finis, &t);
} else
#endif
crpt->crp_callback(crpt);
}
if (krpt != NULL)
krpt->krp_callback(krpt);
CRYPTO_RETQ_LOCK();
} else {
/*
* Nothing more to be processed. Sleep until we're
* woken because there are more returns to process.
*/
msleep(&crp_ret_q, &crypto_ret_q_mtx, PWAIT,
"crypto_ret_wait", 0);
if (cryptoretproc == NULL)
break;
cryptostats.cs_rets++;
}
}
CRYPTO_RETQ_UNLOCK();
crypto_finis(&crp_ret_q);
}
#ifdef DDB
static void
db_show_drivers(void)
{
int hid;
db_printf("%12s %4s %4s %8s %2s %2s\n"
, "Device"
, "Ses"
, "Kops"
, "Flags"
, "QB"
, "KB"
);
for (hid = 0; hid < crypto_drivers_num; hid++) {
const struct cryptocap *cap = &crypto_drivers[hid];
if (cap->cc_dev == NULL)
continue;
db_printf("%-12s %4u %4u %08x %2u %2u\n"
, device_get_nameunit(cap->cc_dev)
, cap->cc_sessions
, cap->cc_koperations
, cap->cc_flags
, cap->cc_qblocked
, cap->cc_kqblocked
);
}
}
DB_SHOW_COMMAND(crypto, db_show_crypto)
{
struct cryptop *crp;
db_show_drivers();
db_printf("\n");
db_printf("%4s %8s %4s %4s %4s %4s %8s %8s\n",
"HID", "Caps", "Ilen", "Olen", "Etype", "Flags",
"Desc", "Callback");
TAILQ_FOREACH(crp, &crp_q, crp_next) {
db_printf("%4u %08x %4u %4u %4u %04x %8p %8p\n"
, (int) CRYPTO_SESID2HID(crp->crp_sid)
, (int) CRYPTO_SESID2CAPS(crp->crp_sid)
, crp->crp_ilen, crp->crp_olen
, crp->crp_etype
, crp->crp_flags
, crp->crp_desc
, crp->crp_callback
);
}
if (!TAILQ_EMPTY(&crp_ret_q)) {
db_printf("\n%4s %4s %4s %8s\n",
"HID", "Etype", "Flags", "Callback");
TAILQ_FOREACH(crp, &crp_ret_q, crp_next) {
db_printf("%4u %4u %04x %8p\n"
, (int) CRYPTO_SESID2HID(crp->crp_sid)
, crp->crp_etype
, crp->crp_flags
, crp->crp_callback
);
}
}
}
DB_SHOW_COMMAND(kcrypto, db_show_kcrypto)
{
struct cryptkop *krp;
db_show_drivers();
db_printf("\n");
db_printf("%4s %5s %4s %4s %8s %4s %8s\n",
"Op", "Status", "#IP", "#OP", "CRID", "HID", "Callback");
TAILQ_FOREACH(krp, &crp_kq, krp_next) {
db_printf("%4u %5u %4u %4u %08x %4u %8p\n"
, krp->krp_op
, krp->krp_status
, krp->krp_iparams, krp->krp_oparams
, krp->krp_crid, krp->krp_hid
, krp->krp_callback
);
}
if (!TAILQ_EMPTY(&crp_ret_q)) {
db_printf("%4s %5s %8s %4s %8s\n",
"Op", "Status", "CRID", "HID", "Callback");
TAILQ_FOREACH(krp, &crp_ret_kq, krp_next) {
db_printf("%4u %5u %08x %4u %8p\n"
, krp->krp_op
, krp->krp_status
, krp->krp_crid, krp->krp_hid
, krp->krp_callback
);
}
}
}
#endif
int crypto_modevent(module_t mod, int type, void *unused);
/*
* Initialization code, both for static and dynamic loading.
* Note this is not invoked with the usual MODULE_DECLARE
* mechanism but instead is listed as a dependency by the
* cryptosoft driver. This guarantees proper ordering of
* calls on module load/unload.
*/
int
crypto_modevent(module_t mod, int type, void *unused)
{
int error = EINVAL;
switch (type) {
case MOD_LOAD:
error = crypto_init();
if (error == 0 && bootverbose)
printf("crypto: <crypto core>\n");
break;
case MOD_UNLOAD:
/*XXX disallow if active sessions */
error = 0;
crypto_destroy();
return 0;
}
return error;
}
MODULE_VERSION(crypto, 1);
MODULE_DEPEND(crypto, zlib, 1, 1, 1);