23e11becca
on instruction between the last load into the DFIFO and enabling the DMA. During back to back SCB DMA, it was possible to hang the card.
1144 lines
34 KiB
Plaintext
1144 lines
34 KiB
Plaintext
/*+M***********************************************************************
|
|
*Adaptec 274x/284x/294x device driver for Linux and FreeBSD.
|
|
*
|
|
*Copyright (c) 1994 John Aycock
|
|
* The University of Calgary Department of Computer Science.
|
|
* All rights reserved.
|
|
*
|
|
*FreeBSD, Twin, Wide, 2 command per target support, tagged queuing,
|
|
*SCB paging and other optimizations:
|
|
*Copyright (c) 1994, 1995, 1996, 1997 Justin Gibbs. All rights reserved.
|
|
*
|
|
*Redistribution and use in source and binary forms, with or without
|
|
*modification, are permitted provided that the following conditions
|
|
*are met:
|
|
*1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer.
|
|
*2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of Calgary
|
|
* Department of Computer Science and its contributors.
|
|
*4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
*THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
*ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
*IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
*ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
*FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
*DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
*OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
*HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
*LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
*OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
*SUCH DAMAGE.
|
|
*
|
|
*-M************************************************************************/
|
|
|
|
#include <dev/aic7xxx/aic7xxx.reg>
|
|
#include <scsi/scsi_message.h>
|
|
|
|
/*
|
|
* A few words on the waiting SCB list:
|
|
* After starting the selection hardware, we check for reconnecting targets
|
|
* as well as for our selection to complete just in case the reselection wins
|
|
* bus arbitration. The problem with this is that we must keep track of the
|
|
* SCB that we've already pulled from the QINFIFO and started the selection
|
|
* on just in case the reselection wins so that we can retry the selection at
|
|
* a later time. This problem cannot be resolved by holding a single entry
|
|
* in scratch ram since a reconnecting target can request sense and this will
|
|
* create yet another SCB waiting for selection. The solution used here is to
|
|
* use byte 27 of the SCB as a psuedo-next pointer and to thread a list
|
|
* of SCBs that are awaiting selection. Since 0-0xfe are valid SCB indexes,
|
|
* SCB_LIST_NULL is 0xff which is out of range. An entry is also added to
|
|
* this list everytime a request sense occurs or after completing a non-tagged
|
|
* command for which a second SCB has been queued. The sequencer will
|
|
* automatically consume the entries.
|
|
*/
|
|
|
|
/*
|
|
* We assume that the kernel driver may reset us at any time, even in the
|
|
* middle of a DMA, so clear DFCNTRL too.
|
|
*/
|
|
reset:
|
|
clr SCSISIGO; /* De-assert BSY */
|
|
/* Always allow reselection */
|
|
mvi SCSISEQ, ENRSELI|ENAUTOATNP;
|
|
call clear_target_state;
|
|
poll_for_work:
|
|
test SSTAT0,SELDI|SELDO jnz selection;
|
|
test SCSISEQ, ENSELO jnz poll_for_work;
|
|
.if ( TWIN_CHANNEL )
|
|
/*
|
|
* Twin channel devices cannot handle things like SELTO
|
|
* interrupts on the "background" channel. So, if we
|
|
* are selecting, keep polling the current channel util
|
|
* either a selection or reselection occurs.
|
|
*/
|
|
xor SBLKCTL,SELBUSB; /* Toggle to the other bus */
|
|
test SSTAT0,SELDI|SELDO jnz selection;
|
|
test SCSISEQ, ENSELO jnz poll_for_work;
|
|
xor SBLKCTL,SELBUSB; /* Toggle back */
|
|
.endif
|
|
cmp WAITING_SCBH,SCB_LIST_NULL jne start_waiting;
|
|
test_queue:
|
|
/* Has the driver posted any work for us? */
|
|
mov A, QCNTMASK;
|
|
test QINCNT,A jz poll_for_work;
|
|
|
|
/*
|
|
* We have at least one queued SCB now and we don't have any
|
|
* SCBs in the list of SCBs awaiting selection. If we have
|
|
* any SCBs available for use, pull the tag from the QINFIFO
|
|
* and get to work on it.
|
|
*/
|
|
.if ( SCB_PAGING )
|
|
mov ALLZEROS call get_free_or_disc_scb;
|
|
cmp SINDEX, SCB_LIST_NULL je poll_for_work;
|
|
.endif
|
|
dequeue_scb:
|
|
mov CUR_SCBID,QINFIFO;
|
|
.if !( SCB_PAGING )
|
|
/* In the non-paging case, the SCBID == hardware SCB index */
|
|
mov SCBPTR, CUR_SCBID;
|
|
.endif
|
|
dma_queued_scb:
|
|
/*
|
|
* DMA the SCB from host ram into the current SCB location.
|
|
*/
|
|
mvi DMAPARAMS, HDMAEN|DIRECTION|FIFORESET;
|
|
mov CUR_SCBID call dma_scb;
|
|
|
|
/*
|
|
* See if there is not already an active SCB for this target. This code
|
|
* locks out on a per target basis instead of target/lun. Although this
|
|
* is not ideal for devices that have multiple luns active at the same
|
|
* time, it is faster than looping through all SCB's looking for active
|
|
* commands. We also don't have enough spare SCB space for us to store the
|
|
* SCBID of the currently busy transaction for each target/lun making it
|
|
* impossible to link up the SCBs.
|
|
*/
|
|
test_busy:
|
|
test SCB_CONTROL, TAG_ENB|ABORT_SCB jnz start_scb;
|
|
mvi SEQCTL, PAUSEDIS|FASTMODE;
|
|
mov SAVED_SCBPTR, SCBPTR;
|
|
mov SCB_TCL call index_untagged_scb;
|
|
mov ARG_1, SINDIR; /*
|
|
* ARG_1 should
|
|
* now have the SCB ID of
|
|
* any active, non-tagged,
|
|
* command for this target.
|
|
*/
|
|
cmp ARG_1, SCB_LIST_NULL je make_busy;
|
|
.if ( SCB_PAGING )
|
|
/*
|
|
* Put this SCB back onto the free list. It
|
|
* may be necessary to satisfy the search for
|
|
* the active SCB.
|
|
*/
|
|
mov SCBPTR, SAVED_SCBPTR;
|
|
call add_scb_to_free_list;
|
|
/* Find the active SCB */
|
|
mov ALLZEROS call findSCB;
|
|
/*
|
|
* If we couldn't find it, tell the kernel. This should
|
|
* never happen.
|
|
*/
|
|
cmp SINDEX, SCB_LIST_NULL jne paged_busy_link;
|
|
mvi INTSTAT, NO_MATCH_BUSY;
|
|
paged_busy_link:
|
|
/* Link us in */
|
|
mov SCB_LINKED_NEXT, CUR_SCBID;
|
|
/* Put it back on the disconnected list */
|
|
call add_scb_to_disc_list;
|
|
mvi SEQCTL, FASTMODE;
|
|
jmp poll_for_work;
|
|
.endif
|
|
simple_busy_link:
|
|
mov SCBPTR, ARG_1;
|
|
mov SCB_LINKED_NEXT, CUR_SCBID;
|
|
mvi SEQCTL, FASTMODE;
|
|
jmp poll_for_work;
|
|
make_busy:
|
|
mov DINDIR, CUR_SCBID;
|
|
mov SCBPTR, SAVED_SCBPTR;
|
|
mvi SEQCTL, FASTMODE;
|
|
|
|
start_scb:
|
|
/*
|
|
* Place us on the waiting list in case our selection
|
|
* doesn't win during bus arbitration.
|
|
*/
|
|
mov SCB_NEXT,WAITING_SCBH;
|
|
mov WAITING_SCBH, SCBPTR;
|
|
start_waiting:
|
|
/*
|
|
* Pull the first entry off of the waiting SCB list
|
|
* We don't have to "test_busy" because only transactions that
|
|
* have passed that test can be in the WAITING_SCB list.
|
|
*/
|
|
mov SCBPTR, WAITING_SCBH;
|
|
call start_selection;
|
|
jmp poll_for_work;
|
|
|
|
start_selection:
|
|
.if ( TWIN_CHANNEL )
|
|
and SINDEX,~SELBUSB,SBLKCTL;/* Clear the channel select bit */
|
|
and A,SELBUSB,SCB_TCL; /* Get new channel bit */
|
|
or SINDEX,A;
|
|
mov SBLKCTL,SINDEX; /* select channel */
|
|
.endif
|
|
initialize_scsiid:
|
|
and A, TID, SCB_TCL; /* Get target ID */
|
|
and SCSIID, OID; /* Clear old target */
|
|
or SCSIID, A;
|
|
mvi SCSISEQ, ENSELO|ENAUTOATNO|ENRSELI|ENAUTOATNP ret;
|
|
/*
|
|
* Reselection has been initiated by a target. Make a note that we've been
|
|
* reselected, but haven't seen an IDENTIFY message from the target yet.
|
|
*/
|
|
selection:
|
|
test SSTAT0, SELDI jz select;
|
|
reselect:
|
|
clr MSG_LEN; /* Don't have anything in the mesg buffer */
|
|
mvi CLRSINT0, CLRSELDI;
|
|
/* XXX test for and handle ONE BIT condition */
|
|
and SAVED_TCL, SELID_MASK, SELID;
|
|
or SEQ_FLAGS,RESELECTED;
|
|
jmp select2;
|
|
|
|
/*
|
|
* After the selection, remove this SCB from the "waiting SCB"
|
|
* list. This is achieved by simply moving our "next" pointer into
|
|
* WAITING_SCBH. Our next pointer will be set to null the next time this
|
|
* SCB is used, so don't bother with it now.
|
|
*/
|
|
select:
|
|
/* Turn off the selection hardware */
|
|
mvi SCSISEQ, ENRSELI|ENAUTOATNP; /*
|
|
* ATN on parity errors
|
|
* for "in" phases
|
|
*/
|
|
mvi CLRSINT0, CLRSELDO;
|
|
mov SCBPTR, WAITING_SCBH;
|
|
mov WAITING_SCBH,SCB_NEXT;
|
|
mov SAVED_TCL, SCB_TCL;
|
|
/*
|
|
* As soon as we get a successful selection, the target should go
|
|
* into the message out phase since we have ATN asserted. Prepare
|
|
* the message to send.
|
|
*
|
|
* Messages are stored in scratch RAM starting with a length byte
|
|
* followed by the message itself.
|
|
*/
|
|
|
|
mk_identify:
|
|
and MSG_OUT,0x7,SCB_TCL; /* lun */
|
|
and A,DISCENB,SCB_CONTROL; /* mask off disconnect privledge */
|
|
or MSG_OUT,A; /* or in disconnect privledge */
|
|
or MSG_OUT,MSG_IDENTIFYFLAG;
|
|
mvi MSG_LEN, 1;
|
|
|
|
/*
|
|
* Send a tag message if TAG_ENB is set in the SCB control block.
|
|
* Use SCB_TAG (the position in the kernel's SCB array) as the tag value.
|
|
*/
|
|
mk_tag:
|
|
test SCB_CONTROL,TAG_ENB jz mk_message;
|
|
and MSG_OUT[1],TAG_ENB|SCB_TAG_TYPE,SCB_CONTROL;
|
|
mov MSG_OUT[2],SCB_TAG;
|
|
add MSG_LEN,2; /* update message length */
|
|
|
|
/*
|
|
* Interrupt the driver, and allow it to tweak the message buffer
|
|
* if it asks.
|
|
*/
|
|
mk_message:
|
|
test SCB_CONTROL,MK_MESSAGE jz select2;
|
|
mvi INTSTAT,AWAITING_MSG;
|
|
|
|
select2:
|
|
mvi CLRSINT1,CLRBUSFREE;
|
|
or SIMODE1, ENBUSFREE; /*
|
|
* We aren't expecting a
|
|
* bus free, so interrupt
|
|
* the kernel driver if it
|
|
* happens.
|
|
*/
|
|
/*
|
|
* Initialize Ultra mode setting and clear the SCSI channel.
|
|
*/
|
|
or SXFRCTL0, CLRSTCNT|SPIOEN|CLRCHN;
|
|
.if ( ULTRA )
|
|
ultra:
|
|
mvi SINDEX, ULTRA_ENB+1;
|
|
test SAVED_TCL, 0x80 jnz ultra_2; /* Target ID > 7 */
|
|
dec SINDEX;
|
|
ultra_2:
|
|
mov FUNCTION1,SAVED_TCL;
|
|
mov A,FUNCTION1;
|
|
test SINDIR, A jz ndx_dtr;
|
|
or SXFRCTL0, FAST20;
|
|
.endif
|
|
|
|
/*
|
|
* Initialize SCSIRATE with the appropriate value for this target.
|
|
* The SCSIRATE settings for each target are stored in an array
|
|
* based at TARG_SCRATCH.
|
|
*/
|
|
ndx_dtr:
|
|
shr A,4,SAVED_TCL;
|
|
test SBLKCTL,SELBUSB jz ndx_dtr_2;
|
|
or SAVED_TCL, SELBUSB; /* Add the channel bit while we're here */
|
|
or A,0x08; /* Channel B entries add 8 */
|
|
ndx_dtr_2:
|
|
add SINDEX,TARG_SCRATCH,A;
|
|
mov SCSIRATE,SINDIR;
|
|
|
|
|
|
/*
|
|
* Main loop for information transfer phases. If BSY is false, then
|
|
* we have a bus free condition, expected or not. Otherwise, wait
|
|
* for the target to assert REQ before checking MSG, C/D and I/O
|
|
* for the bus phase.
|
|
*
|
|
*/
|
|
ITloop:
|
|
test SSTAT1,REQINIT jz ITloop;
|
|
|
|
and A,PHASE_MASK,SCSISIGI;
|
|
mov LASTPHASE,A;
|
|
mov SCSISIGO,A;
|
|
|
|
cmp ALLZEROS,A je p_dataout;
|
|
cmp A,P_DATAIN je p_datain;
|
|
cmp A,P_COMMAND je p_command;
|
|
cmp A,P_MESGOUT je p_mesgout;
|
|
cmp A,P_STATUS je p_status;
|
|
cmp A,P_MESGIN je p_mesgin;
|
|
|
|
mvi INTSTAT,BAD_PHASE; /* unknown phase - signal driver */
|
|
jmp ITloop; /* Try reading the bus again. */
|
|
|
|
await_busfree:
|
|
and SIMODE1, ~ENBUSFREE;
|
|
mov NONE, SCSIDATL; /* Ack the last byte */
|
|
call clear_target_state;
|
|
test SSTAT1,REQINIT|BUSFREE jz .;
|
|
test SSTAT1, BUSFREE jnz poll_for_work;
|
|
mvi INTSTAT, BAD_PHASE;
|
|
|
|
clear_target_state:
|
|
clr DFCNTRL;
|
|
clr SCSIRATE; /*
|
|
* We don't know the target we will
|
|
* connect to, so default to narrow
|
|
* transfers to avoid parity problems.
|
|
*/
|
|
and SXFRCTL0, ~FAST20;
|
|
mvi LASTPHASE, P_BUSFREE;
|
|
/* clear target specific flags */
|
|
and SEQ_FLAGS,~(RESELECTED|IDENTIFY_SEEN|TAGGED_SCB|DPHASE) ret;
|
|
|
|
p_dataout:
|
|
mvi DMAPARAMS, WIDEODD|SCSIEN|SDMAEN|HDMAEN|DIRECTION|FIFORESET;
|
|
jmp data_phase_init;
|
|
|
|
/*
|
|
* If we re-enter the data phase after going through another phase, the
|
|
* STCNT may have been cleared, so restore it from the residual field.
|
|
*/
|
|
data_phase_reinit:
|
|
mvi DINDEX, STCNT;
|
|
mvi SCB_RESID_DCNT call bcopy_3;
|
|
jmp data_phase_loop;
|
|
|
|
p_datain:
|
|
mvi DMAPARAMS, WIDEODD|SCSIEN|SDMAEN|HDMAEN|FIFORESET;
|
|
data_phase_init:
|
|
call assert; /*
|
|
* Ensure entering a data
|
|
* phase is okay - seen identify, etc.
|
|
*/
|
|
|
|
test SEQ_FLAGS, DPHASE jnz data_phase_reinit;
|
|
|
|
/*
|
|
* Initialize the DMA address and counter from the SCB.
|
|
* Also set SG_COUNT and SG_NEXT in memory since we cannot
|
|
* modify the values in the SCB itself until we see a
|
|
* save data pointers message.
|
|
*/
|
|
mvi DINDEX, HADDR;
|
|
mvi SCB_DATAPTR call bcopy_7;
|
|
|
|
call set_stcnt_from_hcnt;
|
|
|
|
mov SG_COUNT,SCB_SGCOUNT;
|
|
|
|
mvi DINDEX, SG_NEXT;
|
|
mvi SCB_SGPTR call bcopy_4;
|
|
|
|
data_phase_loop:
|
|
/* Guard against overruns */
|
|
test SG_COUNT, 0xff jnz data_phase_inbounds;
|
|
/*
|
|
* Turn on 'Bit Bucket' mode, set the transfer count to
|
|
* 16meg and let the target run until it changes phase.
|
|
* When the transfer completes, notify the host that we
|
|
* had an overrun.
|
|
*/
|
|
or SXFRCTL1,BITBUCKET;
|
|
mvi HCNT[0], 0xff;
|
|
mvi HCNT[1], 0xff;
|
|
mvi HCNT[2], 0xff;
|
|
call set_stcnt_from_hcnt;
|
|
|
|
data_phase_inbounds:
|
|
/* If we are the last SG block, ensure wideodd is off. */
|
|
cmp SG_COUNT,0x01 jne data_phase_wideodd;
|
|
and DMAPARAMS, ~WIDEODD;
|
|
data_phase_wideodd:
|
|
mov DMAPARAMS call dma;
|
|
|
|
/* Go tell the host about any overruns */
|
|
test SXFRCTL1,BITBUCKET jnz data_phase_overrun;
|
|
|
|
/* Exit if we had an underrun. dma clears SINDEX in this case. */
|
|
test SINDEX,0xff jz data_phase_finish;
|
|
|
|
/*
|
|
* Advance the scatter-gather pointers if needed
|
|
*/
|
|
sg_advance:
|
|
dec SG_COUNT; /* one less segment to go */
|
|
|
|
test SG_COUNT, 0xff jz data_phase_finish; /* Are we done? */
|
|
|
|
clr A; /* add sizeof(struct scatter) */
|
|
add SG_NEXT[0],SG_SIZEOF;
|
|
adc SG_NEXT[1],A;
|
|
|
|
/*
|
|
* Load a struct scatter and set up the data address and length.
|
|
* If the working value of the SG count is nonzero, then
|
|
* we need to load a new set of values.
|
|
*
|
|
* This, like all DMA's, assumes little-endian host data storage.
|
|
*/
|
|
sg_load:
|
|
mvi DINDEX, HADDR;
|
|
mvi SG_NEXT call bcopy_4;
|
|
|
|
mvi HCNT[0],SG_SIZEOF;
|
|
clr HCNT[1];
|
|
clr HCNT[2];
|
|
|
|
or DFCNTRL, HDMAEN|DIRECTION|FIFORESET;
|
|
|
|
call dma_finish;
|
|
|
|
/*
|
|
* Copy data from FIFO into SCB data pointer and data count. This assumes
|
|
* that the SG segments are of the form:
|
|
*
|
|
* struct ahc_dma_seg {
|
|
* u_int32_t addr; four bytes, little-endian order
|
|
* u_int32_t len; four bytes, little endian order
|
|
* };
|
|
*/
|
|
mvi HADDR call dfdat_in_7;
|
|
|
|
/* Load STCNT as well. It is a mirror of HCNT */
|
|
call set_stcnt_from_hcnt;
|
|
test SSTAT1,PHASEMIS jz data_phase_loop;
|
|
|
|
data_phase_finish:
|
|
/*
|
|
* After a DMA finishes, save the SG and STCNT residuals back into the SCB
|
|
* We use STCNT instead of HCNT, since it's a reflection of how many bytes
|
|
* were transferred on the SCSI (as opposed to the host) bus.
|
|
*/
|
|
mov SCB_RESID_DCNT[0],STCNT[0];
|
|
mov SCB_RESID_DCNT[1],STCNT[1];
|
|
mov SCB_RESID_DCNT[2],STCNT[2];
|
|
mov SCB_RESID_SGCNT, SG_COUNT;
|
|
|
|
/* We have seen a data phase */
|
|
or SEQ_FLAGS, DPHASE;
|
|
|
|
jmp ITloop;
|
|
|
|
data_phase_overrun:
|
|
/*
|
|
* Turn off BITBUCKET mode and notify the host
|
|
*/
|
|
and SXFRCTL1, ~BITBUCKET;
|
|
mvi INTSTAT,DATA_OVERRUN;
|
|
jmp ITloop;
|
|
|
|
/*
|
|
* Command phase. Set up the DMA registers and let 'er rip.
|
|
*/
|
|
p_command:
|
|
call assert;
|
|
|
|
/*
|
|
* Load HADDR and HCNT.
|
|
*/
|
|
mvi DINDEX, HADDR;
|
|
mvi SCB_CMDPTR call bcopy_5;
|
|
clr HCNT[1];
|
|
clr HCNT[2];
|
|
|
|
call set_stcnt_from_hcnt;
|
|
|
|
mvi (SCSIEN|SDMAEN|HDMAEN|DIRECTION|FIFORESET) call dma;
|
|
jmp ITloop;
|
|
|
|
/*
|
|
* Status phase. Wait for the data byte to appear, then read it
|
|
* and store it into the SCB.
|
|
*/
|
|
p_status:
|
|
call assert;
|
|
|
|
mov SCB_TARGET_STATUS, SCSIDATL;
|
|
jmp ITloop;
|
|
|
|
/*
|
|
* Message out phase. If there is not an active message, but the target
|
|
* took us into this phase anyway, build a no-op message and send it.
|
|
*/
|
|
p_mesgout:
|
|
test MSG_LEN, 0xff jnz p_mesgout_start;
|
|
mvi MSG_NOOP call mk_mesg; /* build NOP message */
|
|
p_mesgout_start:
|
|
/*
|
|
* Set up automatic PIO transfer from MSG_OUT. Bit 3 in
|
|
* SXFRCTL0 (SPIOEN) is already on.
|
|
*/
|
|
mvi SINDEX,MSG_OUT;
|
|
mov DINDEX,MSG_LEN;
|
|
|
|
/*
|
|
* When target asks for a byte, drop ATN if it's the last one in
|
|
* the message. Otherwise, keep going until the message is exhausted.
|
|
* ATN must be dropped *at least* 90ns before we ack the last byte, so
|
|
* the code is aranged to execute two instructions before the byte is
|
|
* transferred to give a good margin of safety
|
|
*
|
|
* Keep an eye out for a phase change, in case the target issues
|
|
* a MESSAGE REJECT.
|
|
*/
|
|
p_mesgout_loop:
|
|
test SSTAT1, REQINIT jz p_mesgout_loop;
|
|
and LASTPHASE, PHASE_MASK, SCSISIGI;
|
|
cmp LASTPHASE, P_MESGOUT jne p_mesgout_done;
|
|
/*
|
|
* If the next bus phase after ATN drops is a message out, it means
|
|
* that the target is requesting that the last message(s) be resent.
|
|
*/
|
|
p_mesgout_dropatn:
|
|
cmp DINDEX,1 jne p_mesgout_testretry;/* last byte? */
|
|
mvi CLRSINT1,CLRATNO; /* drop ATN */
|
|
p_mesgout_testretry:
|
|
test DINDEX,0xff jnz p_mesgout_outb;
|
|
or SCSISIGO,ATNO,LASTPHASE;/* turn on ATN for the retry */
|
|
jmp p_mesgout_start;
|
|
p_mesgout_outb:
|
|
dec DINDEX;
|
|
mov SCSIDATL,SINDIR;
|
|
jmp p_mesgout_loop;
|
|
|
|
p_mesgout_done:
|
|
mvi CLRSINT1,CLRATNO; /* Be sure to turn ATNO off */
|
|
clr MSG_LEN; /* no active msg */
|
|
jmp ITloop;
|
|
|
|
/*
|
|
* Message in phase. Bytes are read using Automatic PIO mode.
|
|
*/
|
|
p_mesgin:
|
|
mvi ACCUM call inb_first; /* read the 1st message byte */
|
|
mov REJBYTE,A; /* save it for the driver */
|
|
|
|
test A,MSG_IDENTIFYFLAG jnz mesgin_identify;
|
|
cmp A,MSG_DISCONNECT je mesgin_disconnect;
|
|
cmp A,MSG_SAVEDATAPOINTER je mesgin_sdptrs;
|
|
cmp ALLZEROS,A je mesgin_complete;
|
|
cmp A,MSG_RESTOREPOINTERS je mesgin_rdptrs;
|
|
cmp A,MSG_EXTENDED je mesgin_extended;
|
|
cmp A,MSG_MESSAGE_REJECT je mesgin_reject;
|
|
cmp A,MSG_NOOP je mesgin_done;
|
|
|
|
rej_mesgin:
|
|
/*
|
|
* We have no idea what this message in is, so we issue a message reject
|
|
* and hope for the best. In any case, rejection should be a rare
|
|
* occurrence - signal the driver when it happens.
|
|
*/
|
|
mvi INTSTAT,SEND_REJECT; /* let driver know */
|
|
|
|
mvi MSG_MESSAGE_REJECT call mk_mesg;
|
|
|
|
mesgin_done:
|
|
mov NONE,SCSIDATL; /*dummy read from latch to ACK*/
|
|
jmp ITloop;
|
|
|
|
|
|
mesgin_complete:
|
|
/*
|
|
* We got a "command complete" message, so put the SCB_TAG into the QOUTFIFO,
|
|
* and trigger a completion interrupt. Before doing so, check to see if there
|
|
* is a residual or the status byte is something other than NO_ERROR (0). In
|
|
* either of these conditions, we upload the SCB back to the host so it can
|
|
* process this information. In the case of a non zero status byte, we
|
|
* additionally interrupt the kernel driver synchronously, allowing it to
|
|
* decide if sense should be retrieved. If the kernel driver wishes to request
|
|
* sense, it will fill the kernel SCB with a request sense command and set
|
|
* RETURN_1 to SEND_SENSE. If RETURN_1 is set to SEND_SENSE we redownload
|
|
* the SCB, and process it as the next command by adding it to the waiting list.
|
|
* If the kernel driver does not wish to request sense, it need only clear
|
|
* RETURN_1, and the command is allowed to complete normally. We don't bother
|
|
* to post to the QOUTFIFO in the error cases since it would require extra
|
|
* work in the kernel driver to ensure that the entry was removed before the
|
|
* command complete code tried processing it.
|
|
*/
|
|
|
|
/*
|
|
* First check for residuals
|
|
*/
|
|
test SCB_RESID_SGCNT,0xff jnz upload_scb;
|
|
test SCB_TARGET_STATUS,0xff jz status_ok; /* Good Status? */
|
|
upload_scb:
|
|
mvi DMAPARAMS, FIFORESET;
|
|
mov SCB_TAG call dma_scb;
|
|
check_status:
|
|
test SCB_TARGET_STATUS,0xff jz status_ok; /* Just a residual? */
|
|
mvi INTSTAT,BAD_STATUS; /* let driver know */
|
|
cmp RETURN_1, SEND_SENSE jne status_ok;
|
|
/* This SCB becomes the next to execute as it will retrieve sense */
|
|
mov SCB_LINKED_NEXT, SCB_TAG;
|
|
jmp dma_next_scb;
|
|
|
|
status_ok:
|
|
/* First, mark this target as free. */
|
|
test SCB_CONTROL,TAG_ENB jnz complete; /*
|
|
* Tagged commands
|
|
* don't busy the
|
|
* target.
|
|
*/
|
|
mov SAVED_SCBPTR, SCBPTR;
|
|
mov SAVED_LINKPTR, SCB_LINKED_NEXT;
|
|
mov SCB_TCL call index_untagged_scb;
|
|
mov DINDIR, SAVED_LINKPTR;
|
|
mov SCBPTR, SAVED_SCBPTR;
|
|
|
|
complete:
|
|
/* Post the SCB and issue an interrupt */
|
|
mov QOUTFIFO,SCB_TAG;
|
|
mvi INTSTAT,CMDCMPLT;
|
|
test SCB_CONTROL, ABORT_SCB jz dma_next_scb;
|
|
mvi INTSTAT, ABORT_CMDCMPLT;
|
|
|
|
dma_next_scb:
|
|
cmp SCB_LINKED_NEXT, SCB_LIST_NULL je add_to_free_list;
|
|
.if !( SCB_PAGING )
|
|
/* Only DMA on top of ourselves if we are the SCB to download */
|
|
mov A, SCB_LINKED_NEXT;
|
|
cmp SCB_TAG, A je dma_next_scb2;
|
|
mov SCBPTR, A;
|
|
jmp add_to_waiting_list;
|
|
.endif
|
|
dma_next_scb2:
|
|
mvi DMAPARAMS, HDMAEN|DIRECTION|FIFORESET;
|
|
mov SCB_LINKED_NEXT call dma_scb;
|
|
add_to_waiting_list:
|
|
mov SCB_NEXT,WAITING_SCBH;
|
|
mov WAITING_SCBH, SCBPTR;
|
|
/*
|
|
* Prepare our selection hardware before the busfree so we have a
|
|
* high probability of winning arbitration.
|
|
*/
|
|
call start_selection;
|
|
jmp await_busfree;
|
|
add_to_free_list:
|
|
call add_scb_to_free_list;
|
|
jmp await_busfree;
|
|
|
|
/*
|
|
* Is it an extended message? Copy the message to our message buffer and
|
|
* notify the host. The host will tell us whether to reject this message,
|
|
* respond to it with the message that the host placed in our message buffer,
|
|
* or simply to do nothing.
|
|
*/
|
|
mesgin_extended:
|
|
mvi MSGIN_EXT_LEN call inb_next;
|
|
mov A, MSGIN_EXT_LEN;
|
|
mesgin_extended_loop:
|
|
mov DINDEX call inb_next;
|
|
dec A;
|
|
cmp DINDEX, MSGIN_EXT_BYTES+3 jne mesgin_extended_loop_test;
|
|
dec DINDEX; /* dump by repeatedly filling the last byte */
|
|
mesgin_extended_loop_test:
|
|
test A, 0xFF jnz mesgin_extended_loop;
|
|
mesgin_extended_intr:
|
|
mvi INTSTAT,EXTENDED_MSG; /* let driver know */
|
|
cmp RETURN_1,SEND_REJ je rej_mesgin;
|
|
cmp RETURN_1,SEND_MSG jne mesgin_done;
|
|
/* The kernel has setup a message to be sent */
|
|
or SCSISIGO,ATNO,LASTPHASE; /* turn on ATNO */
|
|
jmp mesgin_done;
|
|
|
|
/*
|
|
* Is it a disconnect message? Set a flag in the SCB to remind us
|
|
* and await the bus going free.
|
|
*/
|
|
mesgin_disconnect:
|
|
or SCB_CONTROL,DISCONNECTED;
|
|
.if ( SCB_PAGING )
|
|
call add_scb_to_disc_list;
|
|
.endif
|
|
jmp await_busfree;
|
|
|
|
/*
|
|
* Save data pointers message:
|
|
* Copying RAM values back to SCB, for Save Data Pointers message, but
|
|
* only if we've actually been into a data phase to change them. This
|
|
* protects against bogus data in scratch ram and the residual counts
|
|
* since they are only initialized when we go into data_in or data_out.
|
|
*/
|
|
mesgin_sdptrs:
|
|
test SEQ_FLAGS, DPHASE jz mesgin_done;
|
|
mov SCB_SGCOUNT,SG_COUNT;
|
|
|
|
/* The SCB SGPTR becomes the next one we'll download */
|
|
mvi DINDEX, SCB_SGPTR;
|
|
mvi SG_NEXT call bcopy_4;
|
|
|
|
/* The SCB DATAPTR0 becomes the current SHADDR */
|
|
mvi DINDEX, SCB_DATAPTR;
|
|
mvi SHADDR call bcopy_4;
|
|
|
|
/*
|
|
* Use the residual number since STCNT is corrupted by any message transfer.
|
|
*/
|
|
mvi SCB_RESID_DCNT call bcopy_3;
|
|
|
|
jmp mesgin_done;
|
|
|
|
/*
|
|
* Restore pointers message? Data pointers are recopied from the
|
|
* SCB anytime we enter a data phase for the first time, so all
|
|
* we need to do is clear the DPHASE flag and let the data phase
|
|
* code do the rest.
|
|
*/
|
|
mesgin_rdptrs:
|
|
and SEQ_FLAGS, ~DPHASE; /*
|
|
* We'll reload them
|
|
* the next time through
|
|
* the dataphase.
|
|
*/
|
|
jmp mesgin_done;
|
|
|
|
/*
|
|
* Identify message? For a reconnecting target, this tells us the lun
|
|
* that the reconnection is for - find the correct SCB and switch to it,
|
|
* clearing the "disconnected" bit so we don't "find" it by accident later.
|
|
*/
|
|
mesgin_identify:
|
|
test A,0x78 jnz rej_mesgin; /*!DiscPriv|!LUNTAR|!Reserved*/
|
|
and A,0x07; /* lun in lower three bits */
|
|
or SAVED_TCL,A; /* SAVED_TCL should be complete now */
|
|
mov SAVED_TCL call index_untagged_scb;
|
|
mov ARG_1, SINDIR;
|
|
/* XXX Directly index in the non paging case */
|
|
cmp ARG_1,SCB_LIST_NULL jne use_findSCB;
|
|
/*
|
|
* Here we "snoop" the bus looking for a SIMPLE QUEUE TAG message.
|
|
* If we get one, we use the tag returned to find the proper
|
|
* SCB. With SCB paging, this requires using findSCB for both tagged
|
|
* and non-tagged transactions since the SCB may exist in any slot.
|
|
* If we're not using SCB paging, we can use the tag as the direct
|
|
* index to the SCB.
|
|
*/
|
|
mov NONE,SCSIDATL; /* ACK Identify MSG */
|
|
snoop_tag_loop:
|
|
test SSTAT1,REQINIT jz snoop_tag_loop;
|
|
and LASTPHASE, PHASE_MASK, SCSISIGI;
|
|
cmp LASTPHASE, P_MESGIN jne not_found;
|
|
cmp SCSIBUSL,MSG_SIMPLE_Q_TAG jne not_found;
|
|
get_tag:
|
|
or SEQ_FLAGS, TAGGED_SCB;
|
|
mvi ARG_1 call inb_next; /* tag value */
|
|
/*
|
|
* See if the tag is in range. The tag is < SCBCOUNT if we add
|
|
* the complement of SCBCOUNT to the incomming tag and there is
|
|
* no carry.
|
|
*/
|
|
mov A,COMP_SCBCOUNT;
|
|
add SINDEX,A,ARG_1;
|
|
jc not_found;
|
|
|
|
.if ! ( SCB_PAGING )
|
|
jmp index_by_tag;
|
|
.endif
|
|
/*
|
|
* Ensure that the SCB the tag points to is for an SCB transaction
|
|
* to the reconnecting target.
|
|
*/
|
|
use_findSCB:
|
|
mov ALLZEROS call findSCB; /* Have to search */
|
|
cmp SINDEX, SCB_LIST_NULL je not_found;
|
|
setup_SCB:
|
|
and SCB_CONTROL,~DISCONNECTED;
|
|
or SEQ_FLAGS,IDENTIFY_SEEN; /* make note of IDENTIFY */
|
|
jmp mesgin_done;
|
|
index_by_tag:
|
|
mov SCBPTR,ARG_1;
|
|
mov A, SAVED_TCL;
|
|
cmp SCB_TCL,A jne not_found;
|
|
test SCB_CONTROL,TAG_ENB jz not_found;
|
|
test SCB_CONTROL,DISCONNECTED jz not_found;
|
|
jmp setup_SCB;
|
|
|
|
not_found:
|
|
mvi INTSTAT, NO_MATCH;
|
|
send_abort_msg:
|
|
test SEQ_FLAGS, TAGGED_SCB jnz send_abort_tag_msg;
|
|
mvi MSG_ABORT call mk_mesg;
|
|
jmp send_abort_done;
|
|
send_abort_tag_msg:
|
|
mvi MSG_ABORT_TAG call mk_mesg; /* ABORT TAG message */
|
|
send_abort_done:
|
|
/* If we don't have the tag ID yet, we're "looking ahead" at state
|
|
* that hasn't been processed, so don't ack.
|
|
*/
|
|
cmp ARG_1, SCB_LIST_NULL je ITloop;
|
|
jmp mesgin_done;
|
|
|
|
/*
|
|
* Message reject? Let the kernel driver handle this. If we have an
|
|
* outstanding WDTR or SDTR negotiation, assume that it's a response from
|
|
* the target selecting 8bit or asynchronous transfer, otherwise just ignore
|
|
* it since we have no clue what it pertains to.
|
|
*/
|
|
mesgin_reject:
|
|
mvi INTSTAT, REJECT_MSG;
|
|
jmp mesgin_done;
|
|
|
|
/*
|
|
* [ ADD MORE MESSAGE HANDLING HERE ]
|
|
*/
|
|
|
|
/*
|
|
* Locking the driver out, build a one-byte message passed in SINDEX
|
|
* if there is no active message already. SINDEX is returned intact.
|
|
*/
|
|
mk_mesg:
|
|
mvi SEQCTL, PAUSEDIS|FASTMODE;
|
|
test MSG_LEN,0xff jz mk_mesg1; /* Should always succeed */
|
|
|
|
/*
|
|
* Hmmm. For some reason the mesg buffer is in use.
|
|
* Tell the driver. It should look at SINDEX to find
|
|
* out what we wanted to use the buffer for and resolve
|
|
* the conflict.
|
|
*/
|
|
mvi SEQCTL,FASTMODE;
|
|
mvi INTSTAT,MSG_BUFFER_BUSY;
|
|
|
|
mk_mesg1:
|
|
or SCSISIGO,ATNO,LASTPHASE;/* turn on ATNO */
|
|
mvi MSG_LEN,1; /* length = 1 */
|
|
mov MSG_OUT,SINDEX; /* 1-byte message */
|
|
mvi SEQCTL,FASTMODE ret;
|
|
|
|
/*
|
|
* Functions to read data in Automatic PIO mode.
|
|
*
|
|
* According to Adaptec's documentation, an ACK is not sent on input from
|
|
* the target until SCSIDATL is read from. So we wait until SCSIDATL is
|
|
* latched (the usual way), then read the data byte directly off the bus
|
|
* using SCSIBUSL. When we have pulled the ATN line, or we just want to
|
|
* acknowledge the byte, then we do a dummy read from SCISDATL. The SCSI
|
|
* spec guarantees that the target will hold the data byte on the bus until
|
|
* we send our ACK.
|
|
*
|
|
* The assumption here is that these are called in a particular sequence,
|
|
* and that REQ is already set when inb_first is called. inb_{first,next}
|
|
* use the same calling convention as inb.
|
|
*/
|
|
|
|
inb_next:
|
|
mov NONE,SCSIDATL; /*dummy read from latch to ACK*/
|
|
inb_next_wait:
|
|
/*
|
|
* If there is a parity error, wait for the kernel to
|
|
* see the interrupt and prepare our message response
|
|
* before continuing.
|
|
*/
|
|
test SSTAT1, REQINIT jz inb_next_wait;
|
|
test SSTAT1, SCSIPERR jnz inb_next_wait;
|
|
and LASTPHASE, PHASE_MASK, SCSISIGI;
|
|
cmp LASTPHASE, P_MESGIN jne mesgin_phasemis;
|
|
inb_first:
|
|
mov DINDEX,SINDEX;
|
|
mov DINDIR,SCSIBUSL ret; /*read byte directly from bus*/
|
|
inb_last:
|
|
mov NONE,SCSIDATL ret; /*dummy read from latch to ACK*/
|
|
|
|
mesgin_phasemis:
|
|
/*
|
|
* We expected to receive another byte, but the target changed phase
|
|
*/
|
|
mvi INTSTAT, MSGIN_PHASEMIS;
|
|
jmp ITloop;
|
|
|
|
/*
|
|
* DMA data transfer. HADDR and HCNT must be loaded first, and
|
|
* SINDEX should contain the value to load DFCNTRL with - 0x3d for
|
|
* host->scsi, or 0x39 for scsi->host. The SCSI channel is cleared
|
|
* during initialization.
|
|
*/
|
|
dma:
|
|
mov DFCNTRL,SINDEX;
|
|
dma_loop:
|
|
test SSTAT0,DMADONE jnz dma_dmadone;
|
|
test SSTAT1,PHASEMIS jz dma_loop; /* ie. underrun */
|
|
dma_phasemis:
|
|
test SSTAT0,SDONE jnz dma_checkfifo;
|
|
mov SINDEX,ALLZEROS; /* Notify caller of phasemiss */
|
|
|
|
/*
|
|
* We will be "done" DMAing when the transfer count goes to zero, or
|
|
* the target changes the phase (in light of this, it makes sense that
|
|
* the DMA circuitry doesn't ACK when PHASEMIS is active). If we are
|
|
* doing a SCSI->Host transfer, the data FIFO should be flushed auto-
|
|
* magically on STCNT=0 or a phase change, so just wait for FIFO empty
|
|
* status.
|
|
*/
|
|
dma_checkfifo:
|
|
test DFCNTRL,DIRECTION jnz dma_fifoempty;
|
|
dma_fifoflush:
|
|
test DFSTATUS,FIFOEMP jz dma_fifoflush;
|
|
|
|
dma_fifoempty:
|
|
/* Don't clobber an inprogress host data transfer */
|
|
test DFSTATUS, MREQPEND jnz dma_fifoempty;
|
|
/*
|
|
* Now shut the DMA enables off and make sure that the DMA enables are
|
|
* actually off first lest we get an ILLSADDR.
|
|
*/
|
|
dma_dmadone:
|
|
and DFCNTRL, ~(SCSIEN|SDMAEN|HDMAEN);
|
|
dma_halt:
|
|
test DFCNTRL, (SCSIEN|SDMAEN|HDMAEN) jnz dma_halt;
|
|
return:
|
|
ret;
|
|
|
|
/*
|
|
* Assert that if we've been reselected, then we've seen an IDENTIFY
|
|
* message.
|
|
*/
|
|
assert:
|
|
test SEQ_FLAGS,RESELECTED jz return; /* reselected? */
|
|
test SEQ_FLAGS,IDENTIFY_SEEN jnz return; /* seen IDENTIFY? */
|
|
|
|
mvi INTSTAT,NO_IDENT ret; /* no - tell the kernel */
|
|
|
|
/*
|
|
* Locate a disconnected SCB either by SAVED_TCL (ARG_1 is SCB_LIST_NULL)
|
|
* or by the SCBIDn ARG_1. The search begins at the SCB index passed in
|
|
* via SINDEX. If the SCB cannot be found, SINDEX will be SCB_LIST_NULL,
|
|
* otherwise, SCBPTR is set to the proper SCB.
|
|
*/
|
|
findSCB:
|
|
mov SCBPTR,SINDEX; /* switch to next SCB */
|
|
mov A, ARG_1; /* Tag passed in ARG_1 */
|
|
cmp SCB_TAG,A jne findSCB_loop;
|
|
test SCB_CONTROL,DISCONNECTED jnz foundSCB;/*should be disconnected*/
|
|
findSCB_loop:
|
|
inc SINDEX;
|
|
mov A,SCBCOUNT;
|
|
cmp SINDEX,A jne findSCB;
|
|
/*
|
|
* We didn't find it. If we're paging, pull an SCB and DMA down the
|
|
* one we want. If we aren't paging or the SCB we dma down has the
|
|
* abort flag set, return not found.
|
|
*/
|
|
.if ( SCB_PAGING )
|
|
mov ALLZEROS call get_free_or_disc_scb;
|
|
mvi DMAPARAMS, HDMAEN|DIRECTION|FIFORESET;
|
|
mov ARG_1 call dma_scb;
|
|
test SCB_CONTROL, ABORT_SCB jz return;
|
|
.endif
|
|
find_error:
|
|
mvi SINDEX, SCB_LIST_NULL ret;
|
|
foundSCB:
|
|
test SCB_CONTROL, ABORT_SCB jnz find_error;
|
|
.if ( SCB_PAGING )
|
|
rem_scb_from_disc_list:
|
|
/* Remove this SCB from the disconnection list */
|
|
cmp SCB_NEXT,SCB_LIST_NULL je unlink_prev;
|
|
mov SAVED_LINKPTR, SCB_PREV;
|
|
mov SCBPTR, SCB_NEXT;
|
|
mov SCB_PREV, SAVED_LINKPTR;
|
|
mov SCBPTR, SINDEX;
|
|
unlink_prev:
|
|
cmp SCB_PREV,SCB_LIST_NULL je rHead;/* At the head of the list */
|
|
mov SAVED_LINKPTR, SCB_NEXT;
|
|
mov SCBPTR, SCB_PREV;
|
|
mov SCB_NEXT, SAVED_LINKPTR;
|
|
mov SCBPTR, SINDEX ret;
|
|
rHead:
|
|
mov DISCONNECTED_SCBH,SCB_NEXT ret;
|
|
.else
|
|
ret;
|
|
.endif
|
|
|
|
set_stcnt_from_hcnt:
|
|
mov STCNT[0], HCNT[0];
|
|
mov STCNT[1], HCNT[1];
|
|
mov STCNT[2], HCNT[2] ret;
|
|
|
|
bcopy_7:
|
|
mov DINDIR, SINDIR;
|
|
mov DINDIR, SINDIR;
|
|
bcopy_5:
|
|
mov DINDIR, SINDIR;
|
|
bcopy_4:
|
|
mov DINDIR, SINDIR;
|
|
bcopy_3:
|
|
mov DINDIR, SINDIR;
|
|
mov DINDIR, SINDIR;
|
|
mov DINDIR, SINDIR ret;
|
|
|
|
dma_scb:
|
|
/*
|
|
* SCB index is in SINDEX. Determine the physical address in
|
|
* the host where this SCB is located and load HADDR with it.
|
|
*/
|
|
shr DINDEX, 3, SINDEX;
|
|
shl A, 5, SINDEX;
|
|
add HADDR[0], A, HSCB_ADDR[0];
|
|
mov A, DINDEX;
|
|
adc HADDR[1], A, HSCB_ADDR[1];
|
|
clr A;
|
|
adc HADDR[2], A, HSCB_ADDR[2];
|
|
adc HADDR[3], A, HSCB_ADDR[3];
|
|
/* Setup Count */
|
|
mvi HCNT[0], 28;
|
|
clr HCNT[1];
|
|
clr HCNT[2];
|
|
mov DFCNTRL, DMAPARAMS;
|
|
test DMAPARAMS, DIRECTION jnz dma_scb_fromhost;
|
|
/* Fill it with the SCB data */
|
|
copy_scb_tofifo:
|
|
mvi SINDEX, SCB_CONTROL;
|
|
add A, 28, SINDEX;
|
|
copy_scb_tofifo_loop:
|
|
mov DFDAT,SINDIR;
|
|
mov DFDAT,SINDIR;
|
|
mov DFDAT,SINDIR;
|
|
mov DFDAT,SINDIR;
|
|
mov DFDAT,SINDIR;
|
|
mov DFDAT,SINDIR;
|
|
mov DFDAT,SINDIR;
|
|
cmp SINDEX, A jne copy_scb_tofifo_loop;
|
|
or DFCNTRL, HDMAEN|FIFOFLUSH;
|
|
dma_scb_fromhost:
|
|
call dma_finish;
|
|
/* If we were putting the SCB, we are done */
|
|
test DMAPARAMS, DIRECTION jz return;
|
|
mvi SCB_CONTROL call dfdat_in_7;
|
|
call dfdat_in_7_continued;
|
|
call dfdat_in_7_continued;
|
|
jmp dfdat_in_7_continued;
|
|
dfdat_in_7:
|
|
mov DINDEX,SINDEX;
|
|
dfdat_in_7_continued:
|
|
mov DINDIR,DFDAT;
|
|
mov DINDIR,DFDAT;
|
|
mov DINDIR,DFDAT;
|
|
mov DINDIR,DFDAT;
|
|
mov DINDIR,DFDAT;
|
|
mov DINDIR,DFDAT;
|
|
mov DINDIR,DFDAT ret;
|
|
|
|
/*
|
|
* Wait for DMA from host memory to data FIFO to complete, then disable
|
|
* DMA and wait for it to acknowledge that it's off.
|
|
*/
|
|
dma_finish:
|
|
test DFSTATUS,HDONE jz dma_finish;
|
|
/* Turn off DMA */
|
|
and DFCNTRL, ~HDMAEN;
|
|
test DFCNTRL, HDMAEN jnz .;
|
|
ret;
|
|
|
|
index_untagged_scb:
|
|
mov DINDEX, SINDEX;
|
|
shr DINDEX, 4;
|
|
and DINDEX, 0x03; /* Bottom two bits of tid */
|
|
add DINDEX, SCB_BUSYTARGETS;
|
|
shr A, 6, SINDEX; /* Target ID divided by 4 */
|
|
test SINDEX, SELBUSB jz index_untagged_scb2;
|
|
add A, 2; /* Add 2 positions */
|
|
index_untagged_scb2:
|
|
mov SCBPTR, A; /*
|
|
* Select the SCB with this
|
|
* target's information.
|
|
*/
|
|
mov SINDEX, DINDEX ret;
|
|
|
|
add_scb_to_free_list:
|
|
mov SCB_NEXT, FREE_SCBH;
|
|
mvi SCB_TAG, SCB_LIST_NULL;
|
|
mov FREE_SCBH, SCBPTR ret;
|
|
|
|
.if ( SCB_PAGING )
|
|
get_free_or_disc_scb:
|
|
cmp FREE_SCBH, SCB_LIST_NULL jne dequeue_free_scb;
|
|
cmp DISCONNECTED_SCBH, SCB_LIST_NULL jne dequeue_disc_scb;
|
|
return_error:
|
|
mvi SINDEX, SCB_LIST_NULL ret;
|
|
dequeue_disc_scb:
|
|
mov SCBPTR, DISCONNECTED_SCBH;
|
|
/*
|
|
* If we have a residual, then we are in the middle of some I/O
|
|
* and we have to send this SCB back up to the kernel so that the
|
|
* saved data pointers and residual information isn't lost.
|
|
*/
|
|
test SCB_RESID_SGCNT,0xff jnz dma_up_scb;
|
|
cmp SCB_LINKED_NEXT, SCB_LIST_NULL je unlink_disc_scb;
|
|
dma_up_scb:
|
|
mvi DMAPARAMS, FIFORESET;
|
|
mov SCB_TAG call dma_scb;
|
|
unlink_disc_scb:
|
|
/* jmp instead of call since we want to return anyway */
|
|
mov SCBPTR jmp rem_scb_from_disc_list;
|
|
dequeue_free_scb:
|
|
mov SCBPTR, FREE_SCBH;
|
|
mov FREE_SCBH, SCB_NEXT ret;
|
|
|
|
add_scb_to_disc_list:
|
|
/*
|
|
* Link this SCB into the DISCONNECTED list. This list holds the
|
|
* candidates for paging out an SCB if one is needed for a new command.
|
|
* Modifying the disconnected list is a critical(pause dissabled) section.
|
|
*/
|
|
mvi SCB_PREV, SCB_LIST_NULL;
|
|
mov SCB_NEXT, DISCONNECTED_SCBH;
|
|
mov DISCONNECTED_SCBH, SCBPTR;
|
|
cmp SCB_NEXT,SCB_LIST_NULL je return;
|
|
mov SCBPTR,SCB_NEXT;
|
|
mov SCB_PREV,DISCONNECTED_SCBH;
|
|
mov SCBPTR,DISCONNECTED_SCBH ret;
|
|
.endif
|