freebsd-dev/sys/arm/include/asmacros.h
Oleksandr Tymoshenko cf1a573f04 Merging projects/armv6, part 1
Cummulative patch of changes that are not vendor-specific:
	- ARMv6 and ARMv7 architecture support
	- ARM SMP support
	- VFP/Neon support
	- ARM Generic Interrupt Controller driver
	- Simplification of startup code for all platforms
2012-08-15 03:03:03 +00:00

260 lines
10 KiB
C

/* $NetBSD: frame.h,v 1.6 2003/10/05 19:44:58 matt Exp $ */
/*-
* Copyright (c) 1994-1997 Mark Brinicombe.
* Copyright (c) 1994 Brini.
* All rights reserved.
*
* This code is derived from software written for Brini by Mark Brinicombe
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Brini.
* 4. The name of the company nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY BRINI ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL BRINI OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MACHINE_ASMACROS_H_
#define _MACHINE_ASMACROS_H_
#include <machine/asm.h>
#ifdef _KERNEL
#ifdef LOCORE
#include "opt_global.h"
/*
* ASM macros for pushing and pulling trapframes from the stack
*
* These macros are used to handle the irqframe and trapframe structures
* defined above.
*/
/*
* PUSHFRAME - macro to push a trap frame on the stack in the current mode
* Since the current mode is used, the SVC lr field is not defined.
*
* NOTE: r13 and r14 are stored separately as a work around for the
* SA110 rev 2 STM^ bug
*/
#ifdef ARM_TP_ADDRESS
#define PUSHFRAME \
str lr, [sp, #-4]!; /* Push the return address */ \
sub sp, sp, #(4*17); /* Adjust the stack pointer */ \
stmia sp, {r0-r12}; /* Push the user mode registers */ \
add r0, sp, #(4*13); /* Adjust the stack pointer */ \
stmia r0, {r13-r14}^; /* Push the user mode registers */ \
mov r0, r0; /* NOP for previous instruction */ \
mrs r0, spsr_all; /* Put the SPSR on the stack */ \
str r0, [sp, #-4]!; \
ldr r0, =ARM_RAS_START; \
mov r1, #0; \
str r1, [r0]; \
mov r1, #0xffffffff; \
str r1, [r0, #4];
#else
#define PUSHFRAME \
str lr, [sp, #-4]!; /* Push the return address */ \
sub sp, sp, #(4*17); /* Adjust the stack pointer */ \
stmia sp, {r0-r12}; /* Push the user mode registers */ \
add r0, sp, #(4*13); /* Adjust the stack pointer */ \
stmia r0, {r13-r14}^; /* Push the user mode registers */ \
mov r0, r0; /* NOP for previous instruction */ \
mrs r0, spsr_all; /* Put the SPSR on the stack */ \
str r0, [sp, #-4]!;
#endif
/*
* PULLFRAME - macro to pull a trap frame from the stack in the current mode
* Since the current mode is used, the SVC lr field is ignored.
*/
#ifdef ARM_TP_ADDRESS
#define PULLFRAME \
ldr r0, [sp], #0x0004; /* Get the SPSR from stack */ \
msr spsr_all, r0; \
ldmia sp, {r0-r14}^; /* Restore registers (usr mode) */ \
mov r0, r0; /* NOP for previous instruction */ \
add sp, sp, #(4*17); /* Adjust the stack pointer */ \
ldr lr, [sp], #0x0004; /* Pull the return address */
#else
#define PULLFRAME \
ldr r0, [sp], #0x0004; /* Get the SPSR from stack */ \
msr spsr_all, r0; \
clrex; \
ldmia sp, {r0-r14}^; /* Restore registers (usr mode) */ \
mov r0, r0; /* NOP for previous instruction */ \
add sp, sp, #(4*17); /* Adjust the stack pointer */ \
ldr lr, [sp], #0x0004; /* Pull the return address */
#endif
/*
* PUSHFRAMEINSVC - macro to push a trap frame on the stack in SVC32 mode
* This should only be used if the processor is not currently in SVC32
* mode. The processor mode is switched to SVC mode and the trap frame is
* stored. The SVC lr field is used to store the previous value of
* lr in SVC mode.
*
* NOTE: r13 and r14 are stored separately as a work around for the
* SA110 rev 2 STM^ bug
*/
#ifdef ARM_TP_ADDRESS
#define PUSHFRAMEINSVC \
stmdb sp, {r0-r3}; /* Save 4 registers */ \
mov r0, lr; /* Save xxx32 r14 */ \
mov r1, sp; /* Save xxx32 sp */ \
mrs r3, spsr; /* Save xxx32 spsr */ \
mrs r2, cpsr; /* Get the CPSR */ \
bic r2, r2, #(PSR_MODE); /* Fix for SVC mode */ \
orr r2, r2, #(PSR_SVC32_MODE); \
msr cpsr_c, r2; /* Punch into SVC mode */ \
mov r2, sp; /* Save SVC sp */ \
str r0, [sp, #-4]!; /* Push return address */ \
str lr, [sp, #-4]!; /* Push SVC lr */ \
str r2, [sp, #-4]!; /* Push SVC sp */ \
msr spsr_all, r3; /* Restore correct spsr */ \
ldmdb r1, {r0-r3}; /* Restore 4 regs from xxx mode */ \
sub sp, sp, #(4*15); /* Adjust the stack pointer */ \
stmia sp, {r0-r12}; /* Push the user mode registers */ \
add r0, sp, #(4*13); /* Adjust the stack pointer */ \
stmia r0, {r13-r14}^; /* Push the user mode registers */ \
mov r0, r0; /* NOP for previous instruction */ \
ldr r5, =ARM_RAS_START; /* Check if there's any RAS */ \
ldr r4, [r5, #4]; /* reset it to point at the */ \
cmp r4, #0xffffffff; /* end of memory if necessary; */ \
movne r1, #0xffffffff; /* leave value in r4 for later */ \
strne r1, [r5, #4]; /* comparision against PC. */ \
ldr r3, [r5]; /* Retrieve global RAS_START */ \
cmp r3, #0; /* and reset it if non-zero. */ \
movne r1, #0; /* If non-zero RAS_START and */ \
strne r1, [r5]; /* PC was lower than RAS_END, */ \
ldrne r1, [r0, #16]; /* adjust the saved PC so that */ \
cmpne r4, r1; /* execution later resumes at */ \
strhi r3, [r0, #16]; /* the RAS_START location. */ \
mrs r0, spsr_all; \
str r0, [sp, #-4]!
#else
#define PUSHFRAMEINSVC \
stmdb sp, {r0-r3}; /* Save 4 registers */ \
mov r0, lr; /* Save xxx32 r14 */ \
mov r1, sp; /* Save xxx32 sp */ \
mrs r3, spsr; /* Save xxx32 spsr */ \
mrs r2, cpsr; /* Get the CPSR */ \
bic r2, r2, #(PSR_MODE); /* Fix for SVC mode */ \
orr r2, r2, #(PSR_SVC32_MODE); \
msr cpsr_c, r2; /* Punch into SVC mode */ \
mov r2, sp; /* Save SVC sp */ \
str r0, [sp, #-4]!; /* Push return address */ \
str lr, [sp, #-4]!; /* Push SVC lr */ \
str r2, [sp, #-4]!; /* Push SVC sp */ \
msr spsr_all, r3; /* Restore correct spsr */ \
ldmdb r1, {r0-r3}; /* Restore 4 regs from xxx mode */ \
sub sp, sp, #(4*15); /* Adjust the stack pointer */ \
stmia sp, {r0-r12}; /* Push the user mode registers */ \
add r0, sp, #(4*13); /* Adjust the stack pointer */ \
stmia r0, {r13-r14}^; /* Push the user mode registers */ \
mov r0, r0; /* NOP for previous instruction */ \
mrs r0, spsr_all; /* Put the SPSR on the stack */ \
str r0, [sp, #-4]!
#endif
/*
* PULLFRAMEFROMSVCANDEXIT - macro to pull a trap frame from the stack
* in SVC32 mode and restore the saved processor mode and PC.
* This should be used when the SVC lr register needs to be restored on
* exit.
*/
#ifdef ARM_TP_ADDRESS
#define PULLFRAMEFROMSVCANDEXIT \
ldr r0, [sp], #0x0004; /* Get the SPSR from stack */ \
msr spsr_all, r0; /* restore SPSR */ \
ldmia sp, {r0-r14}^; /* Restore registers (usr mode) */ \
mov r0, r0; /* NOP for previous instruction */ \
add sp, sp, #(4*15); /* Adjust the stack pointer */ \
ldmia sp, {sp, lr, pc}^ /* Restore lr and exit */
#else
#define PULLFRAMEFROMSVCANDEXIT \
ldr r0, [sp], #0x0004; /* Get the SPSR from stack */ \
msr spsr_all, r0; /* restore SPSR */ \
clrex; \
ldmia sp, {r0-r14}^; /* Restore registers (usr mode) */ \
mov r0, r0; /* NOP for previous instruction */ \
add sp, sp, #(4*15); /* Adjust the stack pointer */ \
ldmia sp, {sp, lr, pc}^ /* Restore lr and exit */
#endif
#define DATA(name) \
.data ; \
_ALIGN_DATA ; \
.globl name ; \
.type name, %object ; \
name:
#ifdef _ARM_ARCH_6
#define AST_LOCALS
#define GET_CURTHREAD_PTR(tmp) \
mrc p15, 0, tmp, c13, c0, 4; \
add tmp, tmp, #(PC_CURTHREAD)
#else
#define AST_LOCALS ;\
.Lcurthread: ;\
.word _C_LABEL(__pcpu) + PC_CURTHREAD
#define GET_CURTHREAD_PTR(tmp) \
ldr tmp, .Lcurthread
#endif
#define DO_AST \
ldr r0, [sp] /* Get the SPSR from stack */ ;\
mrs r4, cpsr /* save CPSR */ ;\
orr r1, r4, #(I32_bit|F32_bit) ;\
msr cpsr_c, r1 /* Disable interrupts */ ;\
and r0, r0, #(PSR_MODE) /* Returning to USR mode? */ ;\
teq r0, #(PSR_USR32_MODE) ;\
bne 2f /* Nope, get out now */ ;\
bic r4, r4, #(I32_bit|F32_bit) ;\
1: GET_CURTHREAD_PTR(r5) ;\
ldr r5, [r5] ;\
ldr r1, [r5, #(TD_FLAGS)] ;\
and r1, r1, #(TDF_ASTPENDING|TDF_NEEDRESCHED) ;\
teq r1, #0x00000000 ;\
beq 2f /* Nope. Just bail */ ;\
msr cpsr_c, r4 /* Restore interrupts */ ;\
mov r0, sp ;\
bl _C_LABEL(ast) /* ast(frame) */ ;\
orr r0, r4, #(I32_bit|F32_bit) ;\
msr cpsr_c, r0 ;\
b 1b ;\
2:
#endif /* LOCORE */
#endif /* _KERNEL */
#endif /* !_MACHINE_ASMACROS_H_ */