freebsd-dev/sys/arm/ti/am335x/am335x_musb.c
Michal Meloun 0050ea2415 Move Ti AM335x to dev/extres/clk framework.
Re-implement clocks for these SoC by using now standard extres/clk framework.
This is necessary for future expansion of these. The new  implementation
is (due to the size of the patch) only the initial (minimum) version.
It will be updated/expanded with a subsequent set of particular patches.

This patch is also not tested on OMAP4 based boards (BeagleBone),
so all possible issues should be (and will be) fixed by ASAP once
identified.

Submited by:		Oskar Holmlund (oskar.holmlund@ohdata.se)
Differential Revision:  https://reviews.freebsd.org/D25118
2020-07-30 14:45:05 +00:00

463 lines
12 KiB
C

/*-
* Copyright (c) 2013 Oleksandr Tymoshenko <gonzo@freebsd.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_util.h>
#define USB_DEBUG_VAR usbssdebug
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#include <dev/usb/controller/musb_otg.h>
#include <dev/usb/usb_debug.h>
#include <sys/rman.h>
#include <arm/ti/am335x/am335x_scm.h>
#include <arm/ti/ti_sysc.h>
#include <dev/extres/clk/clk.h>
#include <dev/extres/syscon/syscon.h>
#include "syscon_if.h"
#define USBCTRL_REV 0x00
#define USBCTRL_CTRL 0x14
#define USBCTRL_STAT 0x18
#define USBCTRL_IRQ_STAT0 0x30
#define IRQ_STAT0_RXSHIFT 16
#define IRQ_STAT0_TXSHIFT 0
#define USBCTRL_IRQ_STAT1 0x34
#define IRQ_STAT1_DRVVBUS (1 << 8)
#define USBCTRL_INTEN_SET0 0x38
#define USBCTRL_INTEN_SET1 0x3C
#define USBCTRL_INTEN_USB_ALL 0x1ff
#define USBCTRL_INTEN_USB_SOF (1 << 3)
#define USBCTRL_INTEN_CLR0 0x40
#define USBCTRL_INTEN_CLR1 0x44
#define USBCTRL_UTMI 0xE0
#define USBCTRL_UTMI_FSDATAEXT (1 << 1)
#define USBCTRL_MODE 0xE8
#define USBCTRL_MODE_IDDIG (1 << 8)
#define USBCTRL_MODE_IDDIGMUX (1 << 7)
/* USBSS resource + 2 MUSB ports */
#define RES_USBCORE 0
#define RES_USBCTRL 1
#define USB_WRITE4(sc, idx, reg, val) do { \
bus_write_4((sc)->sc_mem_res[idx], (reg), (val)); \
} while (0)
#define USB_READ4(sc, idx, reg) bus_read_4((sc)->sc_mem_res[idx], (reg))
#define USBCTRL_WRITE4(sc, reg, val) \
USB_WRITE4((sc), RES_USBCTRL, (reg), (val))
#define USBCTRL_READ4(sc, reg) \
USB_READ4((sc), RES_USBCTRL, (reg))
static struct resource_spec am335x_musbotg_mem_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
{ SYS_RES_MEMORY, 1, RF_ACTIVE },
{ -1, 0, 0 }
};
#ifdef USB_DEBUG
static int usbssdebug = 0;
static SYSCTL_NODE(_hw_usb, OID_AUTO, am335x_usbss,
CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
"AM335x USBSS");
SYSCTL_INT(_hw_usb_am335x_usbss, OID_AUTO, debug, CTLFLAG_RW,
&usbssdebug, 0, "Debug level");
#endif
static device_probe_t musbotg_probe;
static device_attach_t musbotg_attach;
static device_detach_t musbotg_detach;
struct musbotg_super_softc {
struct musbotg_softc sc_otg;
struct resource *sc_mem_res[2];
int sc_irq_rid;
struct syscon *syscon;
};
static void
musbotg_vbus_poll(struct musbotg_super_softc *sc)
{
uint32_t stat;
if (sc->sc_otg.sc_mode == MUSB2_DEVICE_MODE)
musbotg_vbus_interrupt(&sc->sc_otg, 1);
else {
stat = USBCTRL_READ4(sc, USBCTRL_STAT);
musbotg_vbus_interrupt(&sc->sc_otg, stat & 1);
}
}
/*
* Arg to musbotg_clocks_on and musbot_clocks_off is
* a uint32_t * pointing to the SCM register offset.
*/
static uint32_t USB_CTRL[] = {SCM_USB_CTRL0, SCM_USB_CTRL1};
static void
musbotg_clocks_on(void *arg)
{
struct musbotg_softc *sc;
struct musbotg_super_softc *ssc;
uint32_t reg;
sc = arg;
ssc = sc->sc_platform_data;
reg = SYSCON_READ_4(ssc->syscon, USB_CTRL[sc->sc_id]);
reg &= ~3; /* Enable power */
reg |= 1 << 19; /* VBUS detect enable */
reg |= 1 << 20; /* Session end enable */
SYSCON_WRITE_4(ssc->syscon, USB_CTRL[sc->sc_id], reg);
}
static void
musbotg_clocks_off(void *arg)
{
struct musbotg_softc *sc;
struct musbotg_super_softc *ssc;
uint32_t reg;
sc = arg;
ssc = sc->sc_platform_data;
/* Disable power to PHY */
reg = SYSCON_READ_4(ssc->syscon, USB_CTRL[sc->sc_id]);
SYSCON_WRITE_4(ssc->syscon, USB_CTRL[sc->sc_id], reg | 3);
}
static void
musbotg_ep_int_set(struct musbotg_softc *sc, int ep, int on)
{
struct musbotg_super_softc *ssc = sc->sc_platform_data;
uint32_t epmask;
epmask = ((1 << ep) << IRQ_STAT0_RXSHIFT);
epmask |= ((1 << ep) << IRQ_STAT0_TXSHIFT);
if (on)
USBCTRL_WRITE4(ssc, USBCTRL_INTEN_SET0, epmask);
else
USBCTRL_WRITE4(ssc, USBCTRL_INTEN_CLR0, epmask);
}
static void
musbotg_wrapper_interrupt(void *arg)
{
struct musbotg_softc *sc = arg;
struct musbotg_super_softc *ssc = sc->sc_platform_data;
uint32_t stat, stat0, stat1;
stat = USBCTRL_READ4(ssc, USBCTRL_STAT);
stat0 = USBCTRL_READ4(ssc, USBCTRL_IRQ_STAT0);
stat1 = USBCTRL_READ4(ssc, USBCTRL_IRQ_STAT1);
if (stat0)
USBCTRL_WRITE4(ssc, USBCTRL_IRQ_STAT0, stat0);
if (stat1)
USBCTRL_WRITE4(ssc, USBCTRL_IRQ_STAT1, stat1);
DPRINTFN(4, "port%d: stat0=%08x stat1=%08x, stat=%08x\n",
sc->sc_id, stat0, stat1, stat);
if (stat1 & IRQ_STAT1_DRVVBUS)
musbotg_vbus_interrupt(sc, stat & 1);
musbotg_interrupt(arg, ((stat0 >> 16) & 0xffff),
stat0 & 0xffff, stat1 & 0xff);
}
static int
musbotg_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "ti,musb-am33xx"))
return (ENXIO);
device_set_desc(dev, "TI AM33xx integrated USB OTG controller");
return (BUS_PROBE_DEFAULT);
}
static int
musbotg_attach(device_t dev)
{
struct musbotg_super_softc *sc = device_get_softc(dev);
char mode[16];
int err;
uint32_t reg;
phandle_t opp_table;
clk_t clk_usbotg_fck;
sc->sc_otg.sc_id = device_get_unit(dev);
/* FIXME: The devicetree needs to be updated to get a handle to the gate
* usbotg_fck@47c. see TRM 8.1.12.2 CM_WKUP CM_CLKDCOLDO_DPLL_PER.
*/
err = clk_get_by_name(dev, "usbotg_fck@47c", &clk_usbotg_fck);
if (err) {
device_printf(dev, "Can not find usbotg_fck@47c\n");
return (ENXIO);
}
err = clk_enable(clk_usbotg_fck);
if (err) {
device_printf(dev, "Can not enable usbotg_fck@47c\n");
return (ENXIO);
}
/* FIXME: For now; Go and kidnap syscon from opp-table */
opp_table = OF_finddevice("/opp-table");
if (opp_table == -1) {
device_printf(dev, "Cant find /opp-table\n");
return (ENXIO);
}
if (!OF_hasprop(opp_table, "syscon")) {
device_printf(dev, "/opp-table missing syscon property\n");
return (ENXIO);
}
err = syscon_get_by_ofw_property(dev, opp_table, "syscon", &sc->syscon);
if (err) {
device_printf(dev, "Failed to get syscon\n");
return (ENXIO);
}
/* Request the memory resources */
err = bus_alloc_resources(dev, am335x_musbotg_mem_spec,
sc->sc_mem_res);
if (err) {
device_printf(dev,
"Error: could not allocate mem resources\n");
return (ENXIO);
}
/* Request the IRQ resources */
sc->sc_otg.sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&sc->sc_irq_rid, RF_ACTIVE);
if (sc->sc_otg.sc_irq_res == NULL) {
device_printf(dev,
"Error: could not allocate irq resources\n");
return (ENXIO);
}
/* setup MUSB OTG USB controller interface softc */
sc->sc_otg.sc_clocks_on = &musbotg_clocks_on;
sc->sc_otg.sc_clocks_off = &musbotg_clocks_off;
sc->sc_otg.sc_clocks_arg = &sc->sc_otg;
sc->sc_otg.sc_ep_int_set = musbotg_ep_int_set;
/* initialise some bus fields */
sc->sc_otg.sc_bus.parent = dev;
sc->sc_otg.sc_bus.devices = sc->sc_otg.sc_devices;
sc->sc_otg.sc_bus.devices_max = MUSB2_MAX_DEVICES;
sc->sc_otg.sc_bus.dma_bits = 32;
/* get all DMA memory */
if (usb_bus_mem_alloc_all(&sc->sc_otg.sc_bus,
USB_GET_DMA_TAG(dev), NULL)) {
device_printf(dev,
"Failed allocate bus mem for musb\n");
return (ENOMEM);
}
sc->sc_otg.sc_io_res = sc->sc_mem_res[RES_USBCORE];
sc->sc_otg.sc_io_tag =
rman_get_bustag(sc->sc_otg.sc_io_res);
sc->sc_otg.sc_io_hdl =
rman_get_bushandle(sc->sc_otg.sc_io_res);
sc->sc_otg.sc_io_size =
rman_get_size(sc->sc_otg.sc_io_res);
sc->sc_otg.sc_bus.bdev = device_add_child(dev, "usbus", -1);
if (!(sc->sc_otg.sc_bus.bdev)) {
device_printf(dev, "No busdev for musb\n");
goto error;
}
device_set_ivars(sc->sc_otg.sc_bus.bdev,
&sc->sc_otg.sc_bus);
err = bus_setup_intr(dev, sc->sc_otg.sc_irq_res,
INTR_TYPE_BIO | INTR_MPSAFE,
NULL, (driver_intr_t *)musbotg_wrapper_interrupt,
&sc->sc_otg, &sc->sc_otg.sc_intr_hdl);
if (err) {
sc->sc_otg.sc_intr_hdl = NULL;
device_printf(dev,
"Failed to setup interrupt for musb\n");
goto error;
}
sc->sc_otg.sc_platform_data = sc;
if (OF_getprop(ofw_bus_get_node(dev), "dr_mode", mode,
sizeof(mode)) > 0) {
if (strcasecmp(mode, "host") == 0)
sc->sc_otg.sc_mode = MUSB2_HOST_MODE;
else
sc->sc_otg.sc_mode = MUSB2_DEVICE_MODE;
} else {
/* Beaglebone defaults: USB0 device, USB1 HOST. */
if (sc->sc_otg.sc_id == 0)
sc->sc_otg.sc_mode = MUSB2_DEVICE_MODE;
else
sc->sc_otg.sc_mode = MUSB2_HOST_MODE;
}
/*
* software-controlled function
*/
if (sc->sc_otg.sc_mode == MUSB2_HOST_MODE) {
reg = USBCTRL_READ4(sc, USBCTRL_MODE);
reg |= USBCTRL_MODE_IDDIGMUX;
reg &= ~USBCTRL_MODE_IDDIG;
USBCTRL_WRITE4(sc, USBCTRL_MODE, reg);
USBCTRL_WRITE4(sc, USBCTRL_UTMI,
USBCTRL_UTMI_FSDATAEXT);
} else {
reg = USBCTRL_READ4(sc, USBCTRL_MODE);
reg |= USBCTRL_MODE_IDDIGMUX;
reg |= USBCTRL_MODE_IDDIG;
USBCTRL_WRITE4(sc, USBCTRL_MODE, reg);
}
reg = USBCTRL_INTEN_USB_ALL & ~USBCTRL_INTEN_USB_SOF;
USBCTRL_WRITE4(sc, USBCTRL_INTEN_SET1, reg);
USBCTRL_WRITE4(sc, USBCTRL_INTEN_CLR0, 0xffffffff);
err = musbotg_init(&sc->sc_otg);
if (!err)
err = device_probe_and_attach(sc->sc_otg.sc_bus.bdev);
if (err)
goto error;
/* poll VBUS one time */
musbotg_vbus_poll(sc);
return (0);
error:
musbotg_detach(dev);
return (ENXIO);
}
static int
musbotg_detach(device_t dev)
{
struct musbotg_super_softc *sc = device_get_softc(dev);
int err;
/* during module unload there are lots of children leftover */
device_delete_children(dev);
if (sc->sc_otg.sc_irq_res && sc->sc_otg.sc_intr_hdl) {
/*
* only call musbotg_uninit() after musbotg_init()
*/
musbotg_uninit(&sc->sc_otg);
err = bus_teardown_intr(dev, sc->sc_otg.sc_irq_res,
sc->sc_otg.sc_intr_hdl);
sc->sc_otg.sc_intr_hdl = NULL;
}
usb_bus_mem_free_all(&sc->sc_otg.sc_bus, NULL);
/* Free resources if any */
if (sc->sc_mem_res[0])
bus_release_resources(dev, am335x_musbotg_mem_spec,
sc->sc_mem_res);
if (sc->sc_otg.sc_irq_res)
bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irq_rid,
sc->sc_otg.sc_irq_res);
return (0);
}
static device_method_t musbotg_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, musbotg_probe),
DEVMETHOD(device_attach, musbotg_attach),
DEVMETHOD(device_detach, musbotg_detach),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD_END
};
static driver_t musbotg_driver = {
.name = "musbotg",
.methods = musbotg_methods,
.size = sizeof(struct musbotg_super_softc),
};
static devclass_t musbotg_devclass;
DRIVER_MODULE(musbotg, ti_sysc, musbotg_driver, musbotg_devclass, 0, 0);
MODULE_DEPEND(musbotg, ti_sysc, 1, 1, 1);
MODULE_DEPEND(musbotg, ti_am3359_cppi41, 1, 1, 1);
MODULE_DEPEND(usbss, usb, 1, 1, 1);