freebsd-dev/sys/fs/ext2fs/ext2_bmap.c
Pedro F. Giffuni 70097aac13 Define ext2fs local types and use them.
Add definitions for e2fs_daddr_t, e4fs_daddr_t in addition
to the already existing e2fs_lbn_t and adjust them for ext4.
Other than making the code more readable these changes should
fix problems related to big filesystems.

Setting the proper types can be tricky so the process was
helped by looking at UFS. In our implementation, logical block
numbers can be negative and the code depends on it. In ext2,
block numbers are unsigned so it is convenient to keep
e2fs_daddr_t unsigned and use the complete 32 bits. In the
case of e4fs_daddr_t, while the value should be unsigned, for
ext4 we only need to support 48 bits so preserving an extra
bit from the sign is not an issue.

While here also drop the ext2_setblock() prototype that was
never used.

Discussed with:	mckusick, bde
MFC after:	3 weeks
2013-08-13 15:40:43 +00:00

365 lines
10 KiB
C

/*-
* Copyright (c) 1989, 1991, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ufs_bmap.c 8.7 (Berkeley) 3/21/95
* $FreeBSD$
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/mount.h>
#include <sys/resourcevar.h>
#include <sys/stat.h>
#include <fs/ext2fs/inode.h>
#include <fs/ext2fs/fs.h>
#include <fs/ext2fs/ext2fs.h>
#include <fs/ext2fs/ext2_dinode.h>
#include <fs/ext2fs/ext2_extern.h>
#include <fs/ext2fs/ext2_mount.h>
static int ext4_bmapext(struct vnode *, int32_t, int64_t *, int *, int *);
/*
* Bmap converts the logical block number of a file to its physical block
* number on the disk. The conversion is done by using the logical block
* number to index into the array of block pointers described by the dinode.
*/
int
ext2_bmap(struct vop_bmap_args *ap)
{
daddr_t blkno;
int error;
/*
* Check for underlying vnode requests and ensure that logical
* to physical mapping is requested.
*/
if (ap->a_bop != NULL)
*ap->a_bop = &VTOI(ap->a_vp)->i_devvp->v_bufobj;
if (ap->a_bnp == NULL)
return (0);
if (VTOI(ap->a_vp)->i_flags & EXT4_EXTENTS)
error = ext4_bmapext(ap->a_vp, ap->a_bn, &blkno,
ap->a_runp, ap->a_runb);
else
error = ext2_bmaparray(ap->a_vp, ap->a_bn, &blkno,
ap->a_runp, ap->a_runb);
*ap->a_bnp = blkno;
return (error);
}
/*
* This function converts the logical block number of a file to
* its physical block number on the disk within ext4 extents.
*/
static int
ext4_bmapext(struct vnode *vp, int32_t bn, int64_t *bnp, int *runp, int *runb)
{
struct inode *ip;
struct m_ext2fs *fs;
struct ext4_extent *ep;
struct ext4_extent_path path;
daddr_t lbn;
ip = VTOI(vp);
fs = ip->i_e2fs;
lbn = bn;
/*
* TODO: need to implement read ahead to improve the performance.
*/
if (runp != NULL)
*runp = 0;
if (runb != NULL)
*runb = 0;
ext4_ext_find_extent(fs, ip, lbn, &path);
ep = path.ep_ext;
if (ep == NULL)
return (EIO);
*bnp = fsbtodb(fs, lbn - ep->e_blk +
(ep->e_start_lo | (daddr_t)ep->e_start_hi << 32));
if (*bnp == 0)
*bnp = -1;
return (0);
}
/*
* Indirect blocks are now on the vnode for the file. They are given negative
* logical block numbers. Indirect blocks are addressed by the negative
* address of the first data block to which they point. Double indirect blocks
* are addressed by one less than the address of the first indirect block to
* which they point. Triple indirect blocks are addressed by one less than
* the address of the first double indirect block to which they point.
*
* ext2_bmaparray does the bmap conversion, and if requested returns the
* array of logical blocks which must be traversed to get to a block.
* Each entry contains the offset into that block that gets you to the
* next block and the disk address of the block (if it is assigned).
*/
int
ext2_bmaparray(struct vnode *vp, daddr_t bn, daddr_t *bnp, int *runp, int *runb)
{
struct inode *ip;
struct buf *bp;
struct ext2mount *ump;
struct mount *mp;
struct vnode *devvp;
struct indir a[NIADDR+1], *ap;
daddr_t daddr;
e2fs_lbn_t metalbn;
int error, num, maxrun = 0, bsize;
int *nump;
ap = NULL;
ip = VTOI(vp);
mp = vp->v_mount;
ump = VFSTOEXT2(mp);
devvp = ump->um_devvp;
bsize = EXT2_BLOCK_SIZE(ump->um_e2fs);
if (runp) {
maxrun = mp->mnt_iosize_max / bsize - 1;
*runp = 0;
}
if (runb) {
*runb = 0;
}
ap = a;
nump = &num;
error = ext2_getlbns(vp, bn, ap, nump);
if (error)
return (error);
num = *nump;
if (num == 0) {
*bnp = blkptrtodb(ump, ip->i_db[bn]);
if (*bnp == 0) {
*bnp = -1;
} else if (runp) {
daddr_t bnb = bn;
for (++bn; bn < NDADDR && *runp < maxrun &&
is_sequential(ump, ip->i_db[bn - 1], ip->i_db[bn]);
++bn, ++*runp);
bn = bnb;
if (runb && (bn > 0)) {
for (--bn; (bn >= 0) && (*runb < maxrun) &&
is_sequential(ump, ip->i_db[bn],
ip->i_db[bn + 1]);
--bn, ++*runb);
}
}
return (0);
}
/* Get disk address out of indirect block array */
daddr = ip->i_ib[ap->in_off];
for (bp = NULL, ++ap; --num; ++ap) {
/*
* Exit the loop if there is no disk address assigned yet and
* the indirect block isn't in the cache, or if we were
* looking for an indirect block and we've found it.
*/
metalbn = ap->in_lbn;
if ((daddr == 0 && !incore(&vp->v_bufobj, metalbn)) || metalbn == bn)
break;
/*
* If we get here, we've either got the block in the cache
* or we have a disk address for it, go fetch it.
*/
if (bp)
bqrelse(bp);
bp = getblk(vp, metalbn, bsize, 0, 0, 0);
if ((bp->b_flags & B_CACHE) == 0) {
#ifdef INVARIANTS
if (!daddr)
panic("ext2_bmaparray: indirect block not in cache");
#endif
bp->b_blkno = blkptrtodb(ump, daddr);
bp->b_iocmd = BIO_READ;
bp->b_flags &= ~B_INVAL;
bp->b_ioflags &= ~BIO_ERROR;
vfs_busy_pages(bp, 0);
bp->b_iooffset = dbtob(bp->b_blkno);
bstrategy(bp);
curthread->td_ru.ru_inblock++;
error = bufwait(bp);
if (error) {
brelse(bp);
return (error);
}
}
daddr = ((e2fs_daddr_t *)bp->b_data)[ap->in_off];
if (num == 1 && daddr && runp) {
for (bn = ap->in_off + 1;
bn < MNINDIR(ump) && *runp < maxrun &&
is_sequential(ump,
((e2fs_daddr_t *)bp->b_data)[bn - 1],
((e2fs_daddr_t *)bp->b_data)[bn]);
++bn, ++*runp);
bn = ap->in_off;
if (runb && bn) {
for (--bn; bn >= 0 && *runb < maxrun &&
is_sequential(ump,
((e2fs_daddr_t *)bp->b_data)[bn],
((e2fs_daddr_t *)bp->b_data)[bn + 1]);
--bn, ++*runb);
}
}
}
if (bp)
bqrelse(bp);
/*
* Since this is FFS independent code, we are out of scope for the
* definitions of BLK_NOCOPY and BLK_SNAP, but we do know that they
* will fall in the range 1..um_seqinc, so we use that test and
* return a request for a zeroed out buffer if attempts are made
* to read a BLK_NOCOPY or BLK_SNAP block.
*/
if ((ip->i_flags & SF_SNAPSHOT) && daddr > 0 && daddr < ump->um_seqinc){
*bnp = -1;
return (0);
}
*bnp = blkptrtodb(ump, daddr);
if (*bnp == 0) {
*bnp = -1;
}
return (0);
}
/*
* Create an array of logical block number/offset pairs which represent the
* path of indirect blocks required to access a data block. The first "pair"
* contains the logical block number of the appropriate single, double or
* triple indirect block and the offset into the inode indirect block array.
* Note, the logical block number of the inode single/double/triple indirect
* block appears twice in the array, once with the offset into the i_ib and
* once with the offset into the page itself.
*/
int
ext2_getlbns(struct vnode *vp, daddr_t bn, struct indir *ap, int *nump)
{
long blockcnt;
e2fs_lbn_t metalbn, realbn;
struct ext2mount *ump;
int i, numlevels, off;
int64_t qblockcnt;
ump = VFSTOEXT2(vp->v_mount);
if (nump)
*nump = 0;
numlevels = 0;
realbn = bn;
if ((long)bn < 0)
bn = -(long)bn;
/* The first NDADDR blocks are direct blocks. */
if (bn < NDADDR)
return (0);
/*
* Determine the number of levels of indirection. After this loop
* is done, blockcnt indicates the number of data blocks possible
* at the previous level of indirection, and NIADDR - i is the number
* of levels of indirection needed to locate the requested block.
*/
for (blockcnt = 1, i = NIADDR, bn -= NDADDR;; i--, bn -= blockcnt) {
if (i == 0)
return (EFBIG);
/*
* Use int64_t's here to avoid overflow for triple indirect
* blocks when longs have 32 bits and the block size is more
* than 4K.
*/
qblockcnt = (int64_t)blockcnt * MNINDIR(ump);
if (bn < qblockcnt)
break;
blockcnt = qblockcnt;
}
/* Calculate the address of the first meta-block. */
if (realbn >= 0)
metalbn = -(realbn - bn + NIADDR - i);
else
metalbn = -(-realbn - bn + NIADDR - i);
/*
* At each iteration, off is the offset into the bap array which is
* an array of disk addresses at the current level of indirection.
* The logical block number and the offset in that block are stored
* into the argument array.
*/
ap->in_lbn = metalbn;
ap->in_off = off = NIADDR - i;
ap++;
for (++numlevels; i <= NIADDR; i++) {
/* If searching for a meta-data block, quit when found. */
if (metalbn == realbn)
break;
off = (bn / blockcnt) % MNINDIR(ump);
++numlevels;
ap->in_lbn = metalbn;
ap->in_off = off;
++ap;
metalbn -= -1 + off * blockcnt;
blockcnt /= MNINDIR(ump);
}
if (nump)
*nump = numlevels;
return (0);
}