freebsd-dev/sys/contrib/vchiq/interface/vchi/vchi_cfg.h
Oleksandr Tymoshenko 262f27b29e Import VCHI driver for Broadcom's VideoCore IV GPU
Differential Revision:	D1753
2015-02-05 19:54:03 +00:00

225 lines
9.2 KiB
C

/**
* Copyright (c) 2010-2012 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the above-listed copyright holders may not be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2, as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef VCHI_CFG_H_
#define VCHI_CFG_H_
/****************************************************************************************
* Defines in this first section are part of the VCHI API and may be examined by VCHI
* services.
***************************************************************************************/
/* Required alignment of base addresses for bulk transfer, if unaligned transfers are not enabled */
/* Really determined by the message driver, and should be available from a run-time call. */
#ifndef VCHI_BULK_ALIGN
# if __VCCOREVER__ >= 0x04000000
# define VCHI_BULK_ALIGN 32 // Allows for the need to do cache cleans
# else
# define VCHI_BULK_ALIGN 16
# endif
#endif
/* Required length multiple for bulk transfers, if unaligned transfers are not enabled */
/* May be less than or greater than VCHI_BULK_ALIGN */
/* Really determined by the message driver, and should be available from a run-time call. */
#ifndef VCHI_BULK_GRANULARITY
# if __VCCOREVER__ >= 0x04000000
# define VCHI_BULK_GRANULARITY 32 // Allows for the need to do cache cleans
# else
# define VCHI_BULK_GRANULARITY 16
# endif
#endif
/* The largest possible message to be queued with vchi_msg_queue. */
#ifndef VCHI_MAX_MSG_SIZE
# if defined VCHI_LOCAL_HOST_PORT
# define VCHI_MAX_MSG_SIZE 16384 // makes file transfers fast, but should they be using bulk?
# else
# define VCHI_MAX_MSG_SIZE 4096 // NOTE: THIS MUST BE LARGER THAN OR EQUAL TO THE SIZE OF THE KHRONOS MERGE BUFFER!!
# endif
#endif
/******************************************************************************************
* Defines below are system configuration options, and should not be used by VCHI services.
*****************************************************************************************/
/* How many connections can we support? A localhost implementation uses 2 connections,
* 1 for host-app, 1 for VMCS, and these are hooked together by a loopback MPHI VCFW
* driver. */
#ifndef VCHI_MAX_NUM_CONNECTIONS
# define VCHI_MAX_NUM_CONNECTIONS 3
#endif
/* How many services can we open per connection? Extending this doesn't cost processing time, just a small
* amount of static memory. */
#ifndef VCHI_MAX_SERVICES_PER_CONNECTION
# define VCHI_MAX_SERVICES_PER_CONNECTION 36
#endif
/* Adjust if using a message driver that supports more logical TX channels */
#ifndef VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION
# define VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION 9 // 1 MPHI + 8 CCP2 logical channels
#endif
/* Adjust if using a message driver that supports more logical RX channels */
#ifndef VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION
# define VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION 1 // 1 MPHI
#endif
/* How many receive slots do we use. This times VCHI_MAX_MSG_SIZE gives the effective
* receive queue space, less message headers. */
#ifndef VCHI_NUM_READ_SLOTS
# if defined(VCHI_LOCAL_HOST_PORT)
# define VCHI_NUM_READ_SLOTS 4
# else
# define VCHI_NUM_READ_SLOTS 48
# endif
#endif
/* Do we utilise overrun facility for receive message slots? Can aid peer transmit
* performance. Only define on VideoCore end, talking to host.
*/
//#define VCHI_MSG_RX_OVERRUN
/* How many transmit slots do we use. Generally don't need many, as the hardware driver
* underneath VCHI will usually have its own buffering. */
#ifndef VCHI_NUM_WRITE_SLOTS
# define VCHI_NUM_WRITE_SLOTS 4
#endif
/* If a service has held or queued received messages in VCHI_XOFF_THRESHOLD or more slots,
* then it's taking up too much buffer space, and the peer service will be told to stop
* transmitting with an XOFF message. For this to be effective, the VCHI_NUM_READ_SLOTS
* needs to be considerably bigger than VCHI_NUM_WRITE_SLOTS, or the transmit latency
* is too high. */
#ifndef VCHI_XOFF_THRESHOLD
# define VCHI_XOFF_THRESHOLD (VCHI_NUM_READ_SLOTS / 2)
#endif
/* After we've sent an XOFF, the peer will be told to resume transmission once the local
* service has dequeued/released enough messages that it's now occupying
* VCHI_XON_THRESHOLD slots or fewer. */
#ifndef VCHI_XON_THRESHOLD
# define VCHI_XON_THRESHOLD (VCHI_NUM_READ_SLOTS / 4)
#endif
/* A size below which a bulk transfer omits the handshake completely and always goes
* via the message channel, if bulk auxiliary is being sent on that service. (The user
* can guarantee this by enabling unaligned transmits).
* Not API. */
#ifndef VCHI_MIN_BULK_SIZE
# define VCHI_MIN_BULK_SIZE ( VCHI_MAX_MSG_SIZE / 2 < 4096 ? VCHI_MAX_MSG_SIZE / 2 : 4096 )
#endif
/* Maximum size of bulk transmission chunks, for each interface type. A trade-off between
* speed and latency; the smaller the chunk size the better change of messages and other
* bulk transmissions getting in when big bulk transfers are happening. Set to 0 to not
* break transmissions into chunks.
*/
#ifndef VCHI_MAX_BULK_CHUNK_SIZE_MPHI
# define VCHI_MAX_BULK_CHUNK_SIZE_MPHI (16 * 1024)
#endif
/* NB Chunked CCP2 transmissions violate the letter of the CCP2 spec by using "JPEG8" mode
* with multiple-line frames. Only use if the receiver can cope. */
#ifndef VCHI_MAX_BULK_CHUNK_SIZE_CCP2
# define VCHI_MAX_BULK_CHUNK_SIZE_CCP2 0
#endif
/* How many TX messages can we have pending in our transmit slots. Once exhausted,
* vchi_msg_queue will be blocked. */
#ifndef VCHI_TX_MSG_QUEUE_SIZE
# define VCHI_TX_MSG_QUEUE_SIZE 256
#endif
/* How many RX messages can we have parsed in the receive slots. Once exhausted, parsing
* will be suspended until older messages are dequeued/released. */
#ifndef VCHI_RX_MSG_QUEUE_SIZE
# define VCHI_RX_MSG_QUEUE_SIZE 256
#endif
/* Really should be able to cope if we run out of received message descriptors, by
* suspending parsing as the comment above says, but we don't. This sweeps the issue
* under the carpet. */
#if VCHI_RX_MSG_QUEUE_SIZE < (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS
# undef VCHI_RX_MSG_QUEUE_SIZE
# define VCHI_RX_MSG_QUEUE_SIZE (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS
#endif
/* How many bulk transmits can we have pending. Once exhausted, vchi_bulk_queue_transmit
* will be blocked. */
#ifndef VCHI_TX_BULK_QUEUE_SIZE
# define VCHI_TX_BULK_QUEUE_SIZE 64
#endif
/* How many bulk receives can we have pending. Once exhausted, vchi_bulk_queue_receive
* will be blocked. */
#ifndef VCHI_RX_BULK_QUEUE_SIZE
# define VCHI_RX_BULK_QUEUE_SIZE 64
#endif
/* A limit on how many outstanding bulk requests we expect the peer to give us. If
* the peer asks for more than this, VCHI will fail and assert. The number is determined
* by the peer's hardware - it's the number of outstanding requests that can be queued
* on all bulk channels. VC3's MPHI peripheral allows 16. */
#ifndef VCHI_MAX_PEER_BULK_REQUESTS
# define VCHI_MAX_PEER_BULK_REQUESTS 32
#endif
/* Define VCHI_CCP2TX_MANUAL_POWER if the host tells us when to turn the CCP2
* transmitter on and off.
*/
/*#define VCHI_CCP2TX_MANUAL_POWER*/
#ifndef VCHI_CCP2TX_MANUAL_POWER
/* Timeout (in milliseconds) for putting the CCP2TX interface into IDLE state. Set
* negative for no IDLE.
*/
# ifndef VCHI_CCP2TX_IDLE_TIMEOUT
# define VCHI_CCP2TX_IDLE_TIMEOUT 5
# endif
/* Timeout (in milliseconds) for putting the CCP2TX interface into OFF state. Set
* negative for no OFF.
*/
# ifndef VCHI_CCP2TX_OFF_TIMEOUT
# define VCHI_CCP2TX_OFF_TIMEOUT 1000
# endif
#endif /* VCHI_CCP2TX_MANUAL_POWER */
#endif /* VCHI_CFG_H_ */
/****************************** End of file **********************************/