4a98e46950
Use the published compatible strings (our own invention, "ti,mmchs" is still accepted as well, for now). Don't blindly turn on 8-bit bus mode, because even though the conroller supports it, the board has to be wired appropriately as well. Use the published property (bus-width=<n>) and honor all the valid values (1,4,8). The eMMC device on a Beaglebone Black is wired for 8-bit, update the dts. The mmchs controller can inherently do both 1.8v and 3.0v on the first device and 1.8v only on other devices, unless an external transceiver is used. Set the voltage automatically for the first device and honor the published fdt property (ti,dualvolt) for other devices. Thanks go to Ilya Bakulin for figuring out the voltage compatibility stuff.
302 lines
7.6 KiB
Plaintext
302 lines
7.6 KiB
Plaintext
/*-
|
|
* Copyright (c) 2012 Damjan Marion <dmarion@Freebsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
interrupt-parent = <&AINTC>;
|
|
|
|
SOC: am335x {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
ranges;
|
|
bus-frequency = <0>;
|
|
|
|
AINTC: interrupt-controller@48200000 {
|
|
compatible = "ti,aintc";
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = < 0x48200000 0x1000 >;
|
|
};
|
|
|
|
scm@44e10000 {
|
|
compatible = "ti,scm";
|
|
reg = < 0x44e10000 0x2000 >;
|
|
};
|
|
|
|
prcm@44E00000 {
|
|
compatible = "am335x,prcm";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = < 0x44E00000 0x1300 >;
|
|
};
|
|
|
|
dmtimers@44E05000 {
|
|
compatible = "ti,am335x-dmtimer";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = < 0x44E05000 0x1000
|
|
0x44E31000 0x1000
|
|
0x48040000 0x1000
|
|
0x48042000 0x1000
|
|
0x48044000 0x1000
|
|
0x48046000 0x1000
|
|
0x48048000 0x1000
|
|
0x4804A000 0x1000 >;
|
|
interrupts = < 66 67 68 69 92 93 94 95 >;
|
|
interrupt-parent = <&AINTC>;
|
|
};
|
|
|
|
GPIO: gpio {
|
|
#gpio-cells = <3>;
|
|
compatible = "ti,gpio";
|
|
gpio-controller;
|
|
reg =< 0x44E07000 0x1000
|
|
0x4804C000 0x1000
|
|
0x481AC000 0x1000
|
|
0x481AE000 0x1000 >;
|
|
interrupts = < 96 97 98 99 32 33 62 63 >;
|
|
interrupt-parent = <&AINTC>;
|
|
};
|
|
|
|
uart0: serial@44E09000 {
|
|
compatible = "ti,ns16550";
|
|
reg = <0x44E09000 0x1000>;
|
|
reg-shift = <2>;
|
|
interrupts = < 72 >;
|
|
interrupt-parent = <&AINTC>;
|
|
clock-frequency = < 48000000 >;
|
|
uart-device-id = < 0 >;
|
|
};
|
|
|
|
uart1: serial@48022000 {
|
|
compatible = "ti,ns16550";
|
|
reg = <0x48022000 0x1000>;
|
|
reg-shift = <2>;
|
|
interrupts = < 73 >;
|
|
interrupt-parent = <&AINTC>;
|
|
clock-frequency = < 48000000 >;
|
|
uart-device-id = < 1 >;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@48024000 {
|
|
compatible = "ti,ns16550";
|
|
reg = <0x48024000 0x1000>;
|
|
reg-shift = <2>;
|
|
interrupts = < 74 >;
|
|
interrupt-parent = <&AINTC>;
|
|
clock-frequency = < 48000000 >;
|
|
uart-device-id = < 2 >;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@481a6000 {
|
|
compatible = "ti,ns16550";
|
|
reg = <0x481A6000 0x1000>;
|
|
reg-shift = <2>;
|
|
interrupts = < 44 >;
|
|
interrupt-parent = <&AINTC>;
|
|
clock-frequency = < 48000000 >;
|
|
uart-device-id = < 3 >;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@481a8000 {
|
|
compatible = "ti,ns16550";
|
|
reg = <0x481A8000 0x1000>;
|
|
reg-shift = <2>;
|
|
interrupts = < 45 >;
|
|
interrupt-parent = <&AINTC>;
|
|
clock-frequency = < 48000000 >;
|
|
uart-device-id = < 4 >;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@481aa000 {
|
|
compatible = "ti,ns16550";
|
|
reg = <0x481AA000 0x1000>;
|
|
reg-shift = <2>;
|
|
interrupts = < 46 >;
|
|
interrupt-parent = <&AINTC>;
|
|
clock-frequency = < 48000000 >;
|
|
uart-device-id = < 5 >;
|
|
status = "disabled";
|
|
};
|
|
|
|
edma3@49000000 {
|
|
compatible = "ti,edma3";
|
|
reg =< 0x49000000 0x100000 /* Channel Controller Regs */
|
|
0x49800000 0x100000 /* Transfer Controller 0 Regs */
|
|
0x49900000 0x100000 /* Transfer Controller 1 Regs */
|
|
0x49a00000 0x100000 >; /* Transfer Controller 2 Regs */
|
|
interrupts = <12 13 14>;
|
|
interrupt-parent = <&AINTC>;
|
|
};
|
|
|
|
mmchs0@48060000 {
|
|
compatible = "ti,omap3-hsmmc", "ti,mmchs";
|
|
reg =<0x48060000 0x1000 >;
|
|
interrupts = <64>;
|
|
interrupt-parent = <&AINTC>;
|
|
mmchs-device-id = <0>;
|
|
mmchs-wp-gpio-pin = <0xffffffff>;
|
|
ti,dual-volt;
|
|
};
|
|
|
|
mmchs1@481D8000 {
|
|
compatible = "ti,omap3-hsmmc", "ti,mmchs";
|
|
reg =<0x481D8000 0x1000 >;
|
|
interrupts = <28>;
|
|
interrupt-parent = <&AINTC>;
|
|
mmchs-device-id = <1>;
|
|
mmchs-wp-gpio-pin = <0xffffffff>;
|
|
status = "disabled";
|
|
};
|
|
|
|
enet0: ethernet@4A100000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "ti,cpsw";
|
|
reg = <0x4A100000 0x4000>;
|
|
interrupts = <40 41 42 43>;
|
|
interrupt-parent = <&AINTC>;
|
|
phy-handle = <&phy0>;
|
|
mdio@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "ti,cpsw-mdio";
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c0: i2c@44e0b000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "ti,i2c";
|
|
reg =< 0x44e0b000 0x1000 >;
|
|
interrupts = <70>;
|
|
interrupt-parent = <&AINTC>;
|
|
i2c-device-id = <0>;
|
|
};
|
|
|
|
pwm@48300000 {
|
|
compatible = "ti,am335x-pwm";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = < 0x48300000 0x100 /* PWMSS0 */
|
|
0x48300100 0x80 /* eCAP0 */
|
|
0x48300180 0x80 /* eQEP0 */
|
|
0x48300200 0x60 /* ePWM0 */
|
|
>;
|
|
interrupts = <86 58>; /* ePWM0INT, ePWM0_TZINT */
|
|
interrupt-parent = <&AINTC>;
|
|
pwm-device-id = <0>;
|
|
};
|
|
|
|
pwm@48302000 {
|
|
compatible = "ti,am335x-pwm";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = < 0x48302000 0x100 /* PWMSS1 */
|
|
0x48302100 0x80 /* eCAP1 */
|
|
0x48302180 0x80 /* eQEP1 */
|
|
0x48302200 0x60 /* ePWM1 */
|
|
>;
|
|
interrupts = <87 59>; /* ePWM1INT, ePWM1_TZINT */
|
|
interrupt-parent = <&AINTC>;
|
|
pwm-device-id = <1>;
|
|
};
|
|
|
|
pwm@48304000 {
|
|
compatible = "ti,am335x-pwm";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = < 0x48304000 0x100 /* PWMSS2 */
|
|
0x48304100 0x80 /* eCAP2 */
|
|
0x48304180 0x80 /* eQEP2 */
|
|
0x48304200 0x60 /* ePWM2 */
|
|
>;
|
|
interrupts = <88 60>; /* ePWM2INT, ePWM2_TZINT */
|
|
interrupt-parent = <&AINTC>;
|
|
pwm-device-id = <2>;
|
|
};
|
|
|
|
lcd: lcd@4830e000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "ti,am335x-lcd";
|
|
reg =< 0x4830e000 0x1000 >;
|
|
interrupts = <36>;
|
|
interrupt-parent = <&AINTC>;
|
|
};
|
|
|
|
usb@47400000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "ti,musb-am33xx";
|
|
reg =< 0x47400000 0x1000 /* USBSS */
|
|
0x47401000 0x300 /* USB0 */
|
|
0x47401300 0x100 /* USB0_PHY */
|
|
0x47401400 0x400 /* USB0_CORE */
|
|
0x47401800 0x300 /* USB1 */
|
|
0x47401B00 0x100 /* USB1_PHY */
|
|
0x47401C00 0x400 /* USB1_CORE */
|
|
>;
|
|
interrupts = <17 18 19>;
|
|
interrupt-parent = <&AINTC>;
|
|
/* 1 - Host Mode, 0 - Device Mode */
|
|
modemask = <2>;
|
|
};
|
|
|
|
mbox0@480C8000 {
|
|
compatible = "am335x,system-mbox";
|
|
reg = < 0x480C8000 0x1000 >;
|
|
interrupts = <77>;
|
|
interrupt-parent = <&AINTC>;
|
|
};
|
|
|
|
spinlock0@480CA000 {
|
|
compatible = "am335x,spinlock";
|
|
reg = < 0x480CA000 0x1000 >;
|
|
};
|
|
|
|
pruss@4A300000 {
|
|
compatible = "ti,pruss-v2";
|
|
reg = <0x4A300000 0x80000>;
|
|
interrupt-parent = <&AINTC>;
|
|
interrupts = <20 21 22 23 24 25 26 27>;
|
|
};
|
|
};
|
|
};
|