freebsd-dev/sys/net80211/ieee80211_amrr.c
Adrian Chadd 5140f9e6ae Fix AMRR to correctly select the initial rate.
There were two bugs:

* If the initial lowest rate didn't go through the loop at least once,
  the AMRR rate index would be the highest rate in the table
  (eg the rix mapping to MCS15) but rate would stay at the default
  value, namely 0.

  This meant that the initial rate selection would be MCS15 _but_ the
  node ni_txrate value would be MCS0.

* If the node is 11n, then break out of the loop correctly.  Beforehand,
  my initial 11n AMRR commit would immediately exit out as it would
  fail the 11n check, then it would always fall through to the non-11n
  rate which would then see if it was < 36mbit (ie, "72"), which would
  always match.  Hence, it'd always return MCS15.

Tested:

* Intel Centrino 2230 STA (local changes), STA mode
* Intel Wifi 5100, STA
2013-11-09 07:30:13 +00:00

411 lines
12 KiB
C

/* $OpenBSD: ieee80211_amrr.c,v 1.1 2006/06/17 19:07:19 damien Exp $ */
/*-
* Copyright (c) 2010 Rui Paulo <rpaulo@FreeBSD.org>
* Copyright (c) 2006
* Damien Bergamini <damien.bergamini@free.fr>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*-
* Naive implementation of the Adaptive Multi Rate Retry algorithm:
*
* "IEEE 802.11 Rate Adaptation: A Practical Approach"
* Mathieu Lacage, Hossein Manshaei, Thierry Turletti
* INRIA Sophia - Projet Planete
* http://www-sop.inria.fr/rapports/sophia/RR-5208.html
*/
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/sysctl.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_media.h>
#include <net/ethernet.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/if_ether.h>
#endif
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_ht.h>
#include <net80211/ieee80211_amrr.h>
#include <net80211/ieee80211_ratectl.h>
#define is_success(amn) \
((amn)->amn_retrycnt < (amn)->amn_txcnt / 10)
#define is_failure(amn) \
((amn)->amn_retrycnt > (amn)->amn_txcnt / 3)
#define is_enough(amn) \
((amn)->amn_txcnt > 10)
static void amrr_setinterval(const struct ieee80211vap *, int);
static void amrr_init(struct ieee80211vap *);
static void amrr_deinit(struct ieee80211vap *);
static void amrr_node_init(struct ieee80211_node *);
static void amrr_node_deinit(struct ieee80211_node *);
static int amrr_update(struct ieee80211_amrr *,
struct ieee80211_amrr_node *, struct ieee80211_node *);
static int amrr_rate(struct ieee80211_node *, void *, uint32_t);
static void amrr_tx_complete(const struct ieee80211vap *,
const struct ieee80211_node *, int,
void *, void *);
static void amrr_tx_update(const struct ieee80211vap *vap,
const struct ieee80211_node *, void *, void *, void *);
static void amrr_sysctlattach(struct ieee80211vap *,
struct sysctl_ctx_list *, struct sysctl_oid *);
/* number of references from net80211 layer */
static int nrefs = 0;
static const struct ieee80211_ratectl amrr = {
.ir_name = "amrr",
.ir_attach = NULL,
.ir_detach = NULL,
.ir_init = amrr_init,
.ir_deinit = amrr_deinit,
.ir_node_init = amrr_node_init,
.ir_node_deinit = amrr_node_deinit,
.ir_rate = amrr_rate,
.ir_tx_complete = amrr_tx_complete,
.ir_tx_update = amrr_tx_update,
.ir_setinterval = amrr_setinterval,
};
IEEE80211_RATECTL_MODULE(amrr, 1);
IEEE80211_RATECTL_ALG(amrr, IEEE80211_RATECTL_AMRR, amrr);
static void
amrr_setinterval(const struct ieee80211vap *vap, int msecs)
{
struct ieee80211_amrr *amrr = vap->iv_rs;
int t;
if (msecs < 100)
msecs = 100;
t = msecs_to_ticks(msecs);
amrr->amrr_interval = (t < 1) ? 1 : t;
}
static void
amrr_init(struct ieee80211vap *vap)
{
struct ieee80211_amrr *amrr;
KASSERT(vap->iv_rs == NULL, ("%s called multiple times", __func__));
amrr = vap->iv_rs = malloc(sizeof(struct ieee80211_amrr),
M_80211_RATECTL, M_NOWAIT|M_ZERO);
if (amrr == NULL) {
if_printf(vap->iv_ifp, "couldn't alloc ratectl structure\n");
return;
}
amrr->amrr_min_success_threshold = IEEE80211_AMRR_MIN_SUCCESS_THRESHOLD;
amrr->amrr_max_success_threshold = IEEE80211_AMRR_MAX_SUCCESS_THRESHOLD;
amrr_setinterval(vap, 500 /* ms */);
amrr_sysctlattach(vap, vap->iv_sysctl, vap->iv_oid);
}
static void
amrr_deinit(struct ieee80211vap *vap)
{
free(vap->iv_rs, M_80211_RATECTL);
}
/*
* Return whether 11n rates are possible.
*
* Some 11n devices may return HT information but no HT rates.
* Thus, we shouldn't treat them as an 11n node.
*/
static int
amrr_node_is_11n(struct ieee80211_node *ni)
{
if (ni->ni_chan == NULL)
return (0);
if (ni->ni_chan == IEEE80211_CHAN_ANYC)
return (0);
if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && ni->ni_htrates.rs_nrates == 0)
return (0);
return (IEEE80211_IS_CHAN_HT(ni->ni_chan));
}
static void
amrr_node_init(struct ieee80211_node *ni)
{
const struct ieee80211_rateset *rs = NULL;
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_amrr *amrr = vap->iv_rs;
struct ieee80211_amrr_node *amn;
uint8_t rate;
if (ni->ni_rctls == NULL) {
ni->ni_rctls = amn = malloc(sizeof(struct ieee80211_amrr_node),
M_80211_RATECTL, M_NOWAIT|M_ZERO);
if (amn == NULL) {
if_printf(vap->iv_ifp, "couldn't alloc per-node ratectl "
"structure\n");
return;
}
} else
amn = ni->ni_rctls;
amn->amn_amrr = amrr;
amn->amn_success = 0;
amn->amn_recovery = 0;
amn->amn_txcnt = amn->amn_retrycnt = 0;
amn->amn_success_threshold = amrr->amrr_min_success_threshold;
/* 11n or not? Pick the right rateset */
if (amrr_node_is_11n(ni)) {
/* XXX ew */
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_RATECTL, ni,
"%s: 11n node", __func__);
rs = (struct ieee80211_rateset *) &ni->ni_htrates;
} else {
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_RATECTL, ni,
"%s: non-11n node", __func__);
rs = &ni->ni_rates;
}
/* Initial rate - lowest */
rate = rs->rs_rates[0];
/* XXX clear the basic rate flag if it's not 11n */
if (! amrr_node_is_11n(ni))
rate &= IEEE80211_RATE_VAL;
/* pick initial rate from the rateset - HT or otherwise */
for (amn->amn_rix = rs->rs_nrates - 1; amn->amn_rix > 0;
amn->amn_rix--) {
/* legacy - anything < 36mbit, stop searching */
/* 11n - stop at MCS4 / MCS12 / MCS28 */
if (amrr_node_is_11n(ni)) {
if ((rs->rs_rates[amn->amn_rix] & 0x7) < 4)
break;
} else if ((rs->rs_rates[amn->amn_rix] & IEEE80211_RATE_VAL) <= 72)
break;
}
rate = rs->rs_rates[amn->amn_rix] & IEEE80211_RATE_VAL;
/* if the rate is an 11n rate, ensure the MCS bit is set */
if (amrr_node_is_11n(ni))
rate |= IEEE80211_RATE_MCS;
/* Assign initial rate from the rateset */
ni->ni_txrate = rate;
amn->amn_ticks = ticks;
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_RATECTL, ni,
"AMRR: nrates=%d, initial rate %d",
rs->rs_nrates,
rate);
}
static void
amrr_node_deinit(struct ieee80211_node *ni)
{
free(ni->ni_rctls, M_80211_RATECTL);
}
static int
amrr_update(struct ieee80211_amrr *amrr, struct ieee80211_amrr_node *amn,
struct ieee80211_node *ni)
{
int rix = amn->amn_rix;
const struct ieee80211_rateset *rs = NULL;
KASSERT(is_enough(amn), ("txcnt %d", amn->amn_txcnt));
/* 11n or not? Pick the right rateset */
if (amrr_node_is_11n(ni)) {
/* XXX ew */
rs = (struct ieee80211_rateset *) &ni->ni_htrates;
} else {
rs = &ni->ni_rates;
}
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_RATECTL, ni,
"AMRR: current rate %d, txcnt=%d, retrycnt=%d",
rs->rs_rates[rix] & IEEE80211_RATE_VAL,
amn->amn_txcnt,
amn->amn_retrycnt);
/*
* XXX This is totally bogus for 11n, as although high MCS
* rates for each stream may be failing, the next stream
* should be checked.
*
* Eg, if MCS5 is ok but MCS6/7 isn't, and we can go up to
* MCS23, we should skip 6/7 and try 8 onwards.
*/
if (is_success(amn)) {
amn->amn_success++;
if (amn->amn_success >= amn->amn_success_threshold &&
rix + 1 < rs->rs_nrates) {
amn->amn_recovery = 1;
amn->amn_success = 0;
rix++;
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_RATECTL, ni,
"AMRR increasing rate %d (txcnt=%d retrycnt=%d)",
rs->rs_rates[rix] & IEEE80211_RATE_VAL,
amn->amn_txcnt, amn->amn_retrycnt);
} else {
amn->amn_recovery = 0;
}
} else if (is_failure(amn)) {
amn->amn_success = 0;
if (rix > 0) {
if (amn->amn_recovery) {
amn->amn_success_threshold *= 2;
if (amn->amn_success_threshold >
amrr->amrr_max_success_threshold)
amn->amn_success_threshold =
amrr->amrr_max_success_threshold;
} else {
amn->amn_success_threshold =
amrr->amrr_min_success_threshold;
}
rix--;
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_RATECTL, ni,
"AMRR decreasing rate %d (txcnt=%d retrycnt=%d)",
rs->rs_rates[rix] & IEEE80211_RATE_VAL,
amn->amn_txcnt, amn->amn_retrycnt);
}
amn->amn_recovery = 0;
}
/* reset counters */
amn->amn_txcnt = 0;
amn->amn_retrycnt = 0;
return rix;
}
/*
* Return the rate index to use in sending a data frame.
* Update our internal state if it's been long enough.
* If the rate changes we also update ni_txrate to match.
*/
static int
amrr_rate(struct ieee80211_node *ni, void *arg __unused, uint32_t iarg __unused)
{
struct ieee80211_amrr_node *amn = ni->ni_rctls;
struct ieee80211_amrr *amrr = amn->amn_amrr;
const struct ieee80211_rateset *rs = NULL;
int rix;
/* 11n or not? Pick the right rateset */
if (amrr_node_is_11n(ni)) {
/* XXX ew */
rs = (struct ieee80211_rateset *) &ni->ni_htrates;
} else {
rs = &ni->ni_rates;
}
if (is_enough(amn) && (ticks - amn->amn_ticks) > amrr->amrr_interval) {
rix = amrr_update(amrr, amn, ni);
if (rix != amn->amn_rix) {
/* update public rate */
ni->ni_txrate = rs->rs_rates[rix];
/* XXX strip basic rate flag from txrate, if non-11n */
if (amrr_node_is_11n(ni))
ni->ni_txrate |= IEEE80211_RATE_MCS;
else
ni->ni_txrate &= IEEE80211_RATE_VAL;
amn->amn_rix = rix;
}
amn->amn_ticks = ticks;
} else
rix = amn->amn_rix;
return rix;
}
/*
* Update statistics with tx complete status. Ok is non-zero
* if the packet is known to be ACK'd. Retries has the number
* retransmissions (i.e. xmit attempts - 1).
*/
static void
amrr_tx_complete(const struct ieee80211vap *vap,
const struct ieee80211_node *ni, int ok,
void *arg1, void *arg2 __unused)
{
struct ieee80211_amrr_node *amn = ni->ni_rctls;
int retries = *(int *)arg1;
amn->amn_txcnt++;
if (ok)
amn->amn_success++;
amn->amn_retrycnt += retries;
}
/*
* Set tx count/retry statistics explicitly. Intended for
* drivers that poll the device for statistics maintained
* in the device.
*/
static void
amrr_tx_update(const struct ieee80211vap *vap, const struct ieee80211_node *ni,
void *arg1, void *arg2, void *arg3)
{
struct ieee80211_amrr_node *amn = ni->ni_rctls;
int txcnt = *(int *)arg1, success = *(int *)arg2, retrycnt = *(int *)arg3;
amn->amn_txcnt = txcnt;
amn->amn_success = success;
amn->amn_retrycnt = retrycnt;
}
static int
amrr_sysctl_interval(SYSCTL_HANDLER_ARGS)
{
struct ieee80211vap *vap = arg1;
struct ieee80211_amrr *amrr = vap->iv_rs;
int msecs = ticks_to_msecs(amrr->amrr_interval);
int error;
error = sysctl_handle_int(oidp, &msecs, 0, req);
if (error || !req->newptr)
return error;
amrr_setinterval(vap, msecs);
return 0;
}
static void
amrr_sysctlattach(struct ieee80211vap *vap,
struct sysctl_ctx_list *ctx, struct sysctl_oid *tree)
{
struct ieee80211_amrr *amrr = vap->iv_rs;
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
"amrr_rate_interval", CTLTYPE_INT | CTLFLAG_RW, vap,
0, amrr_sysctl_interval, "I", "amrr operation interval (ms)");
/* XXX bounds check values */
SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
"amrr_max_sucess_threshold", CTLFLAG_RW,
&amrr->amrr_max_success_threshold, 0, "");
SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
"amrr_min_sucess_threshold", CTLFLAG_RW,
&amrr->amrr_min_success_threshold, 0, "");
}