freebsd-dev/sys/dev/mii/nsgphy.c
Marius Strobl 8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00

255 lines
6.9 KiB
C

/*-
* Copyright (c) 2001 Wind River Systems
* Copyright (c) 2001
* Bill Paul <wpaul@bsdi.com>. All rights reserved.
* Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for the National Semiconductor DP83861, DP83865 and DP83891
* 10/100/1000 PHYs.
* Datasheet available at: http://www.national.com/ds/DP/DP83861.pdf
* and at: http://www.national.com/ds/DP/DP83865.pdf
*
* The DP83891 is the older NS GigE PHY which isn't being sold
* anymore. The DP83861 is its replacement, which is an 'enhanced'
* firmware driven component. The major difference between the
* two is that the DP83891 can't generate interrupts, while the
* 83861 can (probably it wasn't originally designed to do this, but
* it can now thanks to firmware updates). The DP83861 also allows
* access to its internal RAM via indirect register access. The
* DP83865 is an ultra low power version of the DP83861 and DP83891.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/bus.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miidevs.h"
#include <dev/mii/nsgphyreg.h>
#include "miibus_if.h"
static int nsgphy_probe(device_t);
static int nsgphy_attach(device_t);
static device_method_t nsgphy_methods[] = {
/* device interface */
DEVMETHOD(device_probe, nsgphy_probe),
DEVMETHOD(device_attach, nsgphy_attach),
DEVMETHOD(device_detach, mii_phy_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
{ 0, 0 }
};
static devclass_t nsgphy_devclass;
static driver_t nsgphy_driver = {
"nsgphy",
nsgphy_methods,
sizeof(struct mii_softc)
};
DRIVER_MODULE(nsgphy, miibus, nsgphy_driver, nsgphy_devclass, 0, 0);
static int nsgphy_service(struct mii_softc *, struct mii_data *,int);
static void nsgphy_status(struct mii_softc *);
static const struct mii_phydesc nsgphys[] = {
MII_PHY_DESC(NATSEMI, DP83861),
MII_PHY_DESC(NATSEMI, DP83865),
MII_PHY_DESC(NATSEMI, DP83891),
MII_PHY_END
};
static int
nsgphy_probe(device_t dev)
{
return (mii_phy_dev_probe(dev, nsgphys, BUS_PROBE_DEFAULT));
}
static int
nsgphy_attach(device_t dev)
{
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
sc = device_get_softc(dev);
ma = device_get_ivars(dev);
if (bootverbose)
device_printf(dev, "<rev. %d>\n", MII_REV(ma->mii_id2));
device_printf(dev, " ");
sc->mii_dev = device_get_parent(dev);
mii = ma->mii_data;
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
sc->mii_flags = miibus_get_flags(dev);
sc->mii_inst = mii->mii_instance++;
sc->mii_phy = ma->mii_phyno;
sc->mii_service = nsgphy_service;
sc->mii_pdata = mii;
mii_phy_reset(sc);
/*
* NB: the PHY has the 10baseT BMSR bits hard-wired to 0,
* even though it supports 10baseT.
*/
sc->mii_capabilities = (PHY_READ(sc, MII_BMSR) |
(BMSR_10TFDX | BMSR_10THDX)) & ma->mii_capmask;
if (sc->mii_capabilities & BMSR_EXTSTAT)
sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
mii_phy_add_media(sc);
printf("\n");
MIIBUS_MEDIAINIT(sc->mii_dev);
return (0);
}
static int
nsgphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
switch (cmd) {
case MII_POLLSTAT:
break;
case MII_MEDIACHG:
/*
* If the interface is not up, don't do anything.
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
mii_phy_setmedia(sc);
break;
case MII_TICK:
if (mii_phy_tick(sc) == EJUSTRETURN)
return (0);
break;
}
/* Update the media status. */
nsgphy_status(sc);
/* Callback if something changed. */
mii_phy_update(sc, cmd);
return (0);
}
static void
nsgphy_status(struct mii_softc *sc)
{
struct mii_data *mii = sc->mii_pdata;
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
int bmsr, bmcr, physup, gtsr;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
physup = PHY_READ(sc, NSGPHY_MII_PHYSUP);
if (physup & PHY_SUP_LINK)
mii->mii_media_status |= IFM_ACTIVE;
bmcr = PHY_READ(sc, MII_BMCR);
if (bmcr & BMCR_ISO) {
mii->mii_media_active |= IFM_NONE;
mii->mii_media_status = 0;
return;
}
if (bmcr & BMCR_LOOP)
mii->mii_media_active |= IFM_LOOP;
if (bmcr & BMCR_AUTOEN) {
/*
* The media status bits are only valid if autonegotiation
* has completed (or it's disabled).
*/
if ((bmsr & BMSR_ACOMP) == 0) {
/* Erg, still trying, I guess... */
mii->mii_media_active |= IFM_NONE;
return;
}
switch (physup & (PHY_SUP_SPEED1 | PHY_SUP_SPEED0)) {
case PHY_SUP_SPEED1:
mii->mii_media_active |= IFM_1000_T;
gtsr = PHY_READ(sc, MII_100T2SR);
if (gtsr & GTSR_MS_RES)
mii->mii_media_active |= IFM_ETH_MASTER;
break;
case PHY_SUP_SPEED0:
mii->mii_media_active |= IFM_100_TX;
break;
case 0:
mii->mii_media_active |= IFM_10_T;
break;
default:
mii->mii_media_active |= IFM_NONE;
mii->mii_media_status = 0;
return;
}
if (physup & PHY_SUP_DUPLEX)
mii->mii_media_active |= IFM_FDX;
else
mii->mii_media_active |= IFM_HDX;
} else
mii->mii_media_active = ife->ifm_media;
}