freebsd-dev/sys/dev/twa/twa_globals.c
Vinod Kashyap 6cc7bd9464 1. Revert back to the way the older driver handled XPT_PATH_INQ. This seems to
fix the problem with device discovery seen by some people.
2. Change to make 3ware CLI/3DM work on amd64.
3. Fix a potential problem that could cause the driver to do strlen(NULL) when
   using older firmware.

Reviewed by:scottl
2005-02-10 18:07:33 +00:00

322 lines
13 KiB
C

/*-
* Copyright (c) 2003-04 3ware, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* 3ware driver for 9000 series storage controllers.
*
* Author: Vinod Kashyap
*/
#include <dev/twa/twa_includes.h>
/* AEN messages. */
struct twa_message twa_aen_table[] = {
{0x0000, "AEN queue empty"},
{0x0001, "Controller reset occurred"},
{0x0002, "Degraded unit detected"},
{0x0003, "Controller error occured"},
{0x0004, "Background rebuild failed"},
{0x0005, "Background rebuild done"},
{0x0006, "Incomplete unit detected"},
{0x0007, "Background initialize done"},
{0x0008, "Unclean shutdown detected"},
{0x0009, "Drive timeout detected"},
{0x000A, "Drive error detected"},
{0x000B, "Rebuild started"},
{0x000C, "Background initialize started"},
{0x000D, "Entire logical unit was deleted"},
{0x000E, "Background initialize failed"},
{0x000F, "SMART attribute exceeded threshold"},
{0x0010, "Power supply reported AC under range"},
{0x0011, "Power supply reported DC out of range"},
{0x0012, "Power supply reported a malfunction"},
{0x0013, "Power supply predicted malfunction"},
{0x0014, "Battery charge is below threshold"},
{0x0015, "Fan speed is below threshold"},
{0x0016, "Temperature sensor is above threshold"},
{0x0017, "Power supply was removed"},
{0x0018, "Power supply was inserted"},
{0x0019, "Drive was removed from a bay"},
{0x001A, "Drive was inserted into a bay"},
{0x001B, "Drive bay cover door was opened"},
{0x001C, "Drive bay cover door was closed"},
{0x001D, "Product case was opened"},
{0x0020, "Prepare for shutdown (power-off)"},
{0x0021, "Downgrade UDMA mode to lower speed"},
{0x0022, "Upgrade UDMA mode to higher speed"},
{0x0023, "Sector repair completed"},
{0x0024, "Sbuf memory test failed"},
{0x0025, "Error flushing cached write data to disk"},
{0x0026, "Drive reported data ECC error"},
{0x0027, "DCB has checksum error"},
{0x0028, "DCB version is unsupported"},
{0x0029, "Background verify started"},
{0x002A, "Background verify failed"},
{0x002B, "Background verify done"},
{0x002C, "Bad sector overwritten during rebuild"},
{0x002E, "Replace failed because replacement drive too small"},
{0x002F, "Verify failed because array was never initialized"},
{0x0030, "Unsupported ATA drive"},
{0x0031, "Synchronize host/controller time"},
{0x0032, "Spare capacity is inadequate for some units"},
{0x0033, "Background migration started"},
{0x0034, "Background migration failed"},
{0x0035, "Background migration done"},
{0x0036, "Verify detected and fixed data/parity mismatch"},
{0x0037, "SO-DIMM incompatible"},
{0x0038, "SO-DIMM not detected"},
{0x0039, "Corrected Sbuf ECC error"},
{0x003A, "Drive power on reset detected"},
{0x003B, "Background rebuild paused"},
{0x003C, "Background initialize paused"},
{0x003D, "Background verify paused"},
{0x003E, "Background migration paused"},
{0x003F, "Corrupt flash file system detected"},
{0x0040, "Flash file system repaired"},
{0x0041, "Unit number assignments were lost"},
{0x0042, "Error during read of primary DCB"},
{0x0043, "Latent error found in backup DCB"},
{0x0044, "Voltage is within normal range"},
{0x0045, "Voltage is in low warning range"},
{0x0046, "Voltage is in high warning range"},
{0x0047, "Voltage is below operating range"},
{0x0048, "Voltage is above operating range"},
{0x0049, "Temperature is within normal range"},
{0x004A, "Temperature is in low warning range"},
{0x004B, "Temperature is high warning range"},
{0x004C, "Temperature is below operating range"},
{0x004D, "Temperature is above operating range"},
{0x004E, "Low current test started"},
{0x0050, "Low current test stopped"},
{0x0051, "High current test started"},
{0x0052, "High current test stopped"},
{0x0053, "Charge termination voltage is at high level"},
{0x0054, "Charge termination voltage is at high level"},
{0x0055, "Charge started"},
{0x0056, "Charge stopped"},
{0x0057, "Charge is in fault condition"},
{0x0058, "Capacity is below warning level"},
{0x0059, "Capacity is below error level"},
{0x005A, "Battery is present"},
{0x005B, "Battery is not present"},
{0x005C, "High current test is in warning level"},
{0x005D, "High current test is in fault level"},
{0x0060, "Bad cache meta data checksum"},
{0x0061, "Bad cache meta data signature"},
{0x0062, "Cache meta data restore failed"},
{0x0063, "Cache meta data was lost"},
{0x0064, "Cache write data sync failed"},
{0x0065, "Not able to sync cache write data"},
{0x00FC, "Recovered/finished array membership update"},
{0x00FD, "Handler lockup"},
{0x00FE, "Retrying PCI transfer"},
{0x00FF, "AEN queue is full"},
{0xFFFFFFFF, ""}
};
/* AEN severity table. */
char *twa_aen_severity_table[] = {
"None",
"ERROR",
"WARNING",
"INFO",
"DEBUG",
""
};
/* Error messages. */
struct twa_message twa_error_table[] = {
{0x0100, "SGL entry contains zero data"},
{0x0101, "Invalid command opcode"},
{0x0102, "SGL entry has unaligned address"},
{0x0103, "SGL size does not match command"},
{0x0104, "SGL entry has illegal length"},
{0x0105, "Command packet is not aligned"},
{0x0106, "Invalid request ID"},
{0x0107, "Duplicate request ID"},
{0x0108, "ID not locked"},
{0x0109, "LBA out of range"},
{0x010A, "Logical unit not supported"},
{0x010B, "Parameter table does not exist"},
{0x010C, "Parameter index does not exist"},
{0x010D, "Invalid field in CDB"},
{0x010E, "Specified port has invalid drive"},
{0x010F, "Parameter item size mismatch"},
{0x0110, "Failed memory allocation"},
{0x0111, "Memory request too large"},
{0x0112, "Out of memory segments"},
{0x0113, "Invalid address to deallocate"},
{0x0114, "Out of memory"},
{0x0115, "Out of heap"},
{0x0120, "Double degrade"},
{0x0121, "Drive not degraded"},
{0x0122, "Reconstruct error"},
{0x0123, "Replace not accepted"},
{0x0124, "Drive capacity too small"},
{0x0125, "Sector count not allowed"},
{0x0126, "No spares left"},
{0x0127, "Reconstruct error"},
{0x0128, "Unit is offline"},
{0x0129, "Cannot update status to DCB"},
{0x012A, "Dchnl cannot be split"},
{0x012B, "Dchnl cannot be joined"},
{0x012C, "No migration recovery"},
{0x0130, "Invalid stripe handle"},
{0x0131, "Handle that was not locked"},
{0x0132, "Handle that was not empty"},
{0x0133, "Handle has different owner"},
{0x0140, "IPR has parent"},
{0x0150, "Illegal Pbuf address alignment"},
{0x0151, "Illegal Pbuf transfer length"},
{0x0152, "Illegal Sbuf address alignment"},
{0x0153, "Illegal Sbuf transfer length"},
{0x0160, "Command packet too large"},
{0x0161, "SGL exceeds maximum length"},
{0x0162, "SGL has too many entries"},
{0x0170, "Insufficient resources for rebuilder"},
{0x0171, "Verify error (data != parity)"},
{0x0180, "Requested segment not in directory of this DCB"},
{0x0181, "DCB segment has unsupported version"},
{0x0182, "DCB segment has checksum error"},
{0x0183, "DCB support (settings) segment invalid"},
{0x0184, "DCB UDB (unit descriptor block) segment invalid"},
{0x0185, "DCB GUID (globally unique identifier) segment invalid"},
{0x01A0, "Could not clear Sbuf"},
{0x01C0, "Flash identify failed"},
{0x01C1, "Flash out of bounds"},
{0x01C2, "Flash verify error"},
{0x01C3, "Flash file object not found"},
{0x01C4, "Flash file already present"},
{0x01C5, "Flash file system full"},
{0x01C6, "Flash file not present"},
{0x01C7, "Flash file size error"},
{0x01C8, "Bad flash file checksum"},
{0x01CA, "Corrupt flash file system detected"},
{0x01CB, "Flash file has no component directory"},
{0x01CC, "Flash file component not found"},
{0x01CD, "Flash Write cycle Failed"},
{0x01CE, "Flash Erase cycle Failed"},
{0x01D0, "Invalid field in parameter list"},
{0x01D1, "Parameter list length error"},
{0x01D2, "Parameter item is not changeable"},
{0x01D3, "Parameter item is not saveable"},
{0x0200, "UDMA CRC error"},
{0x0201, "Internal CRC error"},
{0x0202, "Data ECC error"},
{0x0203, "ADP level 1 error"},
{0x0204, "Port timeout"},
{0x0205, "Drive power on reset"},
{0x0206, "ADP level 2 error"},
{0x0207, "Soft reset failed"},
{0x0208, "Drive not ready"},
{0x0209, "Unclassified port error"},
{0x020A, "Drive aborted command"},
{0x0210, "Internal CRC error"},
{0x0211, "PCI abort error"},
{0x0212, "PCI parity error"},
{0x0213, "Port handler error"},
{0x0214, "Token interrupt count error"},
{0x0215, "Timeout waiting for PCI transfer"},
{0x0216, "Corrected buffer ECC"},
{0x0217, "Uncorrected buffer ECC"},
{0x0230, "Unsupported command during flash recovery"},
{0x0231, "Next image buffer expected"},
{0x0232, "Binary image architecture incompatible"},
{0x0233, "Binary image has no signature"},
{0x0234, "Binary image has bad checksum"},
{0x0235, "Binary image overflowed buffer"},
{0x0240, "I2C device not found"},
{0x0241, "I2C transaction aborted"},
{0x0242, "SO-DIMM parameter(s) incompatible using defaults"},
{0x0243, "SO-DIMM unsupported"},
{0x0244, "I2C clock is held low - Transfer aborted"},
{0x0245, "I2C data is held low - Transfer aborted"},
{0x0246, "I2C slave device NACKed the transfer"},
{0x0247, "I2C buffer in-sufficient"},
{0x0248, "SPI transfer status error"},
{0x0249, "SPI transfer timeout error"},
{0x0250, "Invalid unit descriptor size"},
{0x0251, "Unit descriptor size exceeds data buffer"},
{0x0252, "Invalid value in unit descriptor"},
{0x0253, "Inadequate disk space to support descriptor"},
{0x0254, "Unable to create data channel for this unit descriptor"},
{0x0255, "CreateUnit descriptor specifies a drive already in use"},
{0x0256, "Unable to write configuration to all disks during CreateUnit"},
{0x0257, "CreateUnit/MigrateUnit does not support this descriptor version"},
{0x0258, "Invalid subunit for RAID 0 or 5 in CreateUnit/MigrateUnit"},
{0x0259, "Too many descriptors in CreateUnit/MigrateUnit"},
{0x025A, "Invalid configuration specified in unit descriptor"},
{0x025B, "Invalid LBA offset specified in unit descriptor"},
{0x025C, "Invalid stripelet size specified in unit descriptor"},
{0x025D, "JBOD unit is not allowed"},
{0x0260, "SMART attribute exceeded threshold"},
{0x0270, "Unit is not in NORMAL state"},
{0x0271, "Invalid drive members"},
{0x0272, "Converted unit is not supported"},
{0x0300, "Internal errorcode (BBU base) - should not occur"},
{0x0301, "Invalid BBU state change request"},
{0x0302, "The BBU resource needed is in use ; retry command after a delay"},
{0x0303, "Command requires a battery pack to be present and enabled"},
{0x0310, "BBU command packet error"},
{0x0311, "BBU command not implemented"},
{0x0312, "BBU command buffer underflow"},
{0x0313, "BBU command buffer overflow"},
{0x0314, "BBU command incomplete"},
{0x0315, "BBU command checksum error"},
{0x0316, "BBU command timeout"},
{0x0320, "BBU parameter not defined"},
{0x0321, "BBU parameter size mismatch"},
{0x0322, "Cannot write a read-only BBU parameter"},
{0x0323, "BBU firmware version string not found"},
{0x0324, "BBU operating state not available"},
{0x0325, "BBU not present"},
{0x0326, "BBU not ready"},
{0x0327, "BBU S1 not compatible with HBA"},
{0x0328, "BBU S0 not compatible with HBA"},
{0x0329, "BBU not compatible with HBA"},
{0x032A, "BBU not in S0"},
{0x032B, "BBU not in S1"},
{0x032C, "Timeout on BBU power fail interrupt"},
{0x032D, "BBU command checksum error"},
{0x0330, "Log updates not allowed"},
{0x0331, "Logs are invalid"},
{0x0332, "Logs not found"},
{0xFFFFFFFF, ""}
};
#ifdef TWA_DEBUG
/*
* Save the debug levels in global variables, so that
* their values can be changed from the debugger.
*/
u_int8_t twa_dbg_level = TWA_DEBUG;
u_int8_t twa_call_dbg_level = TWA_DEBUG;
#endif /* TWA_DEBUG */