d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
224f878512
freebsd-dev/sys/dev/mii/tlphy.c
Marius Strobl 3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00

388 lines
10 KiB
C
Raw Blame History

/* $NetBSD: tlphy.c,v 1.18 1999/05/14 11:40:28 drochner Exp $ */
/*-
* Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*-
* Copyright (c) 1997 Manuel Bouyer. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for Texas Instruments's ThunderLAN PHYs
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/errno.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <machine/bus.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miidevs.h"
#include <dev/mii/tlphyreg.h>
#include "miibus_if.h"
struct tlphy_softc {
struct mii_softc sc_mii; /* generic PHY */
int sc_need_acomp;
};
static int tlphy_probe(device_t);
static int tlphy_attach(device_t);
static device_method_t tlphy_methods[] = {
/* device interface */
DEVMETHOD(device_probe, tlphy_probe),
DEVMETHOD(device_attach, tlphy_attach),
DEVMETHOD(device_detach, mii_phy_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
{ 0, 0 }
};
static devclass_t tlphy_devclass;
static driver_t tlphy_driver = {
"tlphy",
tlphy_methods,
sizeof(struct tlphy_softc)
};
DRIVER_MODULE(tlphy, miibus, tlphy_driver, tlphy_devclass, 0, 0);
static int tlphy_service(struct mii_softc *, struct mii_data *, int);
static int tlphy_auto(struct tlphy_softc *);
static void tlphy_acomp(struct tlphy_softc *);
static void tlphy_status(struct mii_softc *);
static const struct mii_phydesc tlphys[] = {
MII_PHY_DESC(TI, TLAN10T),
MII_PHY_END
};
static const struct mii_phy_funcs tlphy_funcs = {
tlphy_service,
tlphy_status,
mii_phy_reset
};
static int
tlphy_probe(device_t dev)
{
if (strcmp(device_get_name(device_get_parent(device_get_parent(dev))),
"tl") != 0)
return (ENXIO);
return (mii_phy_dev_probe(dev, tlphys, BUS_PROBE_DEFAULT));
}
static int
tlphy_attach(device_t dev)
{
device_t *devlist;
struct mii_softc *other, *sc_mii;
const char *sep = "";
int capmask, devs, i;
sc_mii = device_get_softc(dev);
mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &tlphy_funcs, 0);
/*
* Note that if we're on a device that also supports 100baseTX,
* we are not going to want to use the built-in 10baseT port,
* since there will be another PHY on the MII wired up to the
* UTP connector.
*/
capmask = BMSR_DEFCAPMASK;
if (sc_mii->mii_inst &&
device_get_children(sc_mii->mii_dev, &devlist, &devs) == 0) {
for (i = 0; i < devs; i++) {
if (devlist[i] != dev) {
other = device_get_softc(devlist[i]);
capmask &= ~other->mii_capabilities;
break;
}
}
free(devlist, M_TEMP);
}
PHY_RESET(sc_mii);
sc_mii->mii_capabilities = PHY_READ(sc_mii, MII_BMSR) & capmask;
#define ADD(m, c) \
ifmedia_add(&sc_mii->mii_pdata->mii_media, (m), (c), NULL)
#define PRINT(s) printf("%s%s", sep, s); sep = ", "
if ((sc_mii->mii_flags & (MIIF_MACPRIV0 | MIIF_MACPRIV1)) != 0 &&
(sc_mii->mii_capabilities & BMSR_MEDIAMASK) != 0)
device_printf(dev, " ");
if ((sc_mii->mii_flags & MIIF_MACPRIV0) != 0) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_2, 0, sc_mii->mii_inst),
0);
PRINT("10base2/BNC");
}
if ((sc_mii->mii_flags & MIIF_MACPRIV1) != 0) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_5, 0, sc_mii->mii_inst),
0);
PRINT("10base5/AUI");
}
if ((sc_mii->mii_capabilities & BMSR_MEDIAMASK) != 0) {
printf("%s", sep);
mii_phy_add_media(sc_mii);
}
if ((sc_mii->mii_flags & (MIIF_MACPRIV0 | MIIF_MACPRIV1)) != 0 &&
(sc_mii->mii_capabilities & BMSR_MEDIAMASK) != 0)
printf("\n");
#undef ADD
#undef PRINT
MIIBUS_MEDIAINIT(sc_mii->mii_dev);
return (0);
}
static int
tlphy_service(struct mii_softc *self, struct mii_data *mii, int cmd)
{
struct tlphy_softc *sc = (struct tlphy_softc *)self;
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
int reg;
if (sc->sc_need_acomp)
tlphy_acomp(sc);
switch (cmd) {
case MII_POLLSTAT:
break;
case MII_MEDIACHG:
/*
* If the interface is not up, don't do anything.
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
switch (IFM_SUBTYPE(ife->ifm_media)) {
case IFM_AUTO:
/*
* The ThunderLAN PHY doesn't self-configure after
* an autonegotiation cycle, so there's no such
* thing as "already in auto mode".
*/
(void)tlphy_auto(sc);
break;
case IFM_10_2:
case IFM_10_5:
PHY_WRITE(&sc->sc_mii, MII_BMCR, 0);
PHY_WRITE(&sc->sc_mii, MII_TLPHY_CTRL, CTRL_AUISEL);
DELAY(100000);
break;
default:
PHY_WRITE(&sc->sc_mii, MII_TLPHY_CTRL, 0);
DELAY(100000);
mii_phy_setmedia(&sc->sc_mii);
}
break;
case MII_TICK:
/*
* Is the interface even up?
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
return (0);
/*
* Only used for autonegotiation.
*/
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
break;
/*
* Check to see if we have link. If we do, we don't
* need to restart the autonegotiation process. Read
* the BMSR twice in case it's latched.
*
* XXX WHAT ABOUT CHECKING LINK ON THE BNC/AUI?!
*/
reg = PHY_READ(&sc->sc_mii, MII_BMSR) |
PHY_READ(&sc->sc_mii, MII_BMSR);
if (reg & BMSR_LINK)
break;
/*
* Only retry autonegotiation every 5 seconds.
*/
if (++sc->sc_mii.mii_ticks <= MII_ANEGTICKS)
break;
sc->sc_mii.mii_ticks = 0;
PHY_RESET(&sc->sc_mii);
(void)tlphy_auto(sc);
return (0);
}
/* Update the media status. */
PHY_STATUS(self);
/* Callback if something changed. */
mii_phy_update(&sc->sc_mii, cmd);
return (0);
}
static void
tlphy_status(struct mii_softc *self)
{
struct tlphy_softc *sc = (struct tlphy_softc *)self;
struct mii_data *mii = sc->sc_mii.mii_pdata;
int bmsr, bmcr, tlctrl;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
bmcr = PHY_READ(&sc->sc_mii, MII_BMCR);
if (bmcr & BMCR_ISO) {
mii->mii_media_active |= IFM_NONE;
mii->mii_media_status = 0;
return;
}
tlctrl = PHY_READ(&sc->sc_mii, MII_TLPHY_CTRL);
if (tlctrl & CTRL_AUISEL) {
mii->mii_media_status = 0;
mii->mii_media_active = mii->mii_media.ifm_cur->ifm_media;
return;
}
bmsr = PHY_READ(&sc->sc_mii, MII_BMSR) |
PHY_READ(&sc->sc_mii, MII_BMSR);
if (bmsr & BMSR_LINK)
mii->mii_media_status |= IFM_ACTIVE;
if (bmcr & BMCR_LOOP)
mii->mii_media_active |= IFM_LOOP;
/*
* Grr, braindead ThunderLAN PHY doesn't have any way to
* tell which media is actually active. (Note it also
* doesn't self-configure after autonegotiation.) We
* just have to report what's in the BMCR.
*/
if (bmcr & BMCR_FDX)
mii->mii_media_active |= IFM_FDX | mii_phy_flowstatus(self);
else
mii->mii_media_active |= IFM_HDX;
mii->mii_media_active |= IFM_10_T;
}
static int
tlphy_auto(struct tlphy_softc *sc)
{
int error;
switch ((error = mii_phy_auto(&sc->sc_mii))) {
case EIO:
/*
* Just assume we're not in full-duplex mode.
* XXX Check link and try AUI/BNC?
*/
PHY_WRITE(&sc->sc_mii, MII_BMCR, 0);
break;
case EJUSTRETURN:
/* Flag that we need to program when it completes. */
sc->sc_need_acomp = 1;
break;
default:
tlphy_acomp(sc);
}
return (error);
}
static void
tlphy_acomp(struct tlphy_softc *sc)
{
int aner, anlpar;
sc->sc_need_acomp = 0;
/*
* Grr, braindead ThunderLAN PHY doesn't self-configure
* after autonegotiation. We have to do it ourselves
* based on the link partner status.
*/
aner = PHY_READ(&sc->sc_mii, MII_ANER);
if (aner & ANER_LPAN) {
anlpar = PHY_READ(&sc->sc_mii, MII_ANLPAR) &
PHY_READ(&sc->sc_mii, MII_ANAR);
if (anlpar & ANAR_10_FD) {
PHY_WRITE(&sc->sc_mii, MII_BMCR, BMCR_FDX);
return;
}
}
PHY_WRITE(&sc->sc_mii, MII_BMCR, 0);
}
Reference in New Issue View Git Blame Copy Permalink