d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
232b4f33b4
freebsd-dev/crypto/openssh/Makefile.in
Ed Maste f374ba41f5 ssh: update to OpenSSH 9.2p1 
Release notes are available at https://www.openssh.com/txt/release-9.2

OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem.  The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.

Some other notable items from the release notes:

 * ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
   controls whether the client-side ~C escape sequence that provides a
   command-line is available. Among other things, the ~C command-line
   could be used to add additional port-forwards at runtime.

 * sshd(8): add support for channel inactivity timeouts via a new
   sshd_config(5) ChannelTimeout directive. This allows channels that
   have not seen traffic in a configurable interval to be
   automatically closed. Different timeouts may be applied to session,
   X11, agent and TCP forwarding channels.

 * sshd(8): add a sshd_config UnusedConnectionTimeout option to
   terminate client connections that have no open channels for a
   length of time. This complements the ChannelTimeout option above.
    
 * sshd(8): add a -V (version) option to sshd like the ssh client has.

 * scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
   allow control over some SFTP protocol parameters: the copy buffer
   length and the number of in-flight requests, both of which are used
   during upload/download. Previously these could be controlled in
   sftp(1) only. This makes them available in both SFTP protocol
   clients using the same option character sequence.
    
 * ssh-keyscan(1): allow scanning of complete CIDR address ranges,
   e.g.  "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
   it will be expanded to all possible addresses in the range
   including the all-0s and all-1s addresses. bz#976

 * ssh(1): support dynamic remote port forwarding in escape
   command-line's -R processing. bz#3499

MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
2023-02-06 16:54:56 -05:00

781 lines
29 KiB
Makefile
Raw Blame History

SHELL=@SH@
AUTORECONF=autoreconf
prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
sbindir=@sbindir@
libexecdir=@libexecdir@
datadir=@datadir@
datarootdir=@datarootdir@
mandir=@mandir@
mansubdir=@mansubdir@
sysconfdir=@sysconfdir@
piddir=@piddir@
srcdir=@srcdir@
top_srcdir=@top_srcdir@
abs_top_srcdir=@abs_top_srcdir@
abs_top_builddir=@abs_top_builddir@
DESTDIR=
VPATH=@srcdir@
SSH_PROGRAM=@bindir@/ssh
ASKPASS_PROGRAM=$(libexecdir)/ssh-askpass
SFTP_SERVER=$(libexecdir)/sftp-server
SSH_KEYSIGN=$(libexecdir)/ssh-keysign
SSH_PKCS11_HELPER=$(libexecdir)/ssh-pkcs11-helper
SSH_SK_HELPER=$(libexecdir)/ssh-sk-helper
PRIVSEP_PATH=@PRIVSEP_PATH@
SSH_PRIVSEP_USER=@SSH_PRIVSEP_USER@
STRIP_OPT=@STRIP_OPT@
TEST_SHELL=@TEST_SHELL@
BUILDDIR=@abs_top_builddir@
PATHS= -DSSHDIR=\"$(sysconfdir)\" \
-D_PATH_SSH_PROGRAM=\"$(SSH_PROGRAM)\" \
-D_PATH_SSH_ASKPASS_DEFAULT=\"$(ASKPASS_PROGRAM)\" \
-D_PATH_SFTP_SERVER=\"$(SFTP_SERVER)\" \
-D_PATH_SSH_KEY_SIGN=\"$(SSH_KEYSIGN)\" \
-D_PATH_SSH_PKCS11_HELPER=\"$(SSH_PKCS11_HELPER)\" \
-D_PATH_SSH_SK_HELPER=\"$(SSH_SK_HELPER)\" \
-D_PATH_SSH_PIDDIR=\"$(piddir)\" \
-D_PATH_PRIVSEP_CHROOT_DIR=\"$(PRIVSEP_PATH)\"
CC=@CC@
LD=@LD@
CFLAGS=@CFLAGS@
CFLAGS_NOPIE=@CFLAGS_NOPIE@
CPPFLAGS=-I. -I$(srcdir) @CPPFLAGS@ $(PATHS) @DEFS@
PICFLAG=@PICFLAG@
LIBS=@LIBS@
CHANNELLIBS=@CHANNELLIBS@
K5LIBS=@K5LIBS@
GSSLIBS=@GSSLIBS@
SSHDLIBS=@SSHDLIBS@
LIBEDIT=@LIBEDIT@
LIBFIDO2=@LIBFIDO2@
AR=@AR@
AWK=@AWK@
RANLIB=@RANLIB@
INSTALL=@INSTALL@
SED=@SED@
XAUTH_PATH=@XAUTH_PATH@
LDFLAGS=-L. -Lopenbsd-compat/ @LDFLAGS@
LDFLAGS_NOPIE=-L. -Lopenbsd-compat/ @LDFLAGS_NOPIE@
EXEEXT=@EXEEXT@
MANFMT=@MANFMT@
MKDIR_P=@MKDIR_P@
.SUFFIXES: .lo
TARGETS=ssh$(EXEEXT) sshd$(EXEEXT) ssh-add$(EXEEXT) ssh-keygen$(EXEEXT) ssh-keyscan${EXEEXT} ssh-keysign${EXEEXT} ssh-pkcs11-helper$(EXEEXT) ssh-agent$(EXEEXT) scp$(EXEEXT) sftp-server$(EXEEXT) sftp$(EXEEXT) ssh-sk-helper$(EXEEXT)
XMSS_OBJS=\
ssh-xmss.o \
sshkey-xmss.o \
xmss_commons.o \
xmss_fast.o \
xmss_hash.o \
xmss_hash_address.o \
xmss_wots.o
LIBOPENSSH_OBJS=\
ssh_api.o \
ssherr.o \
sshbuf.o \
sshkey.o \
sshbuf-getput-basic.o \
sshbuf-misc.o \
sshbuf-getput-crypto.o \
krl.o \
bitmap.o \
${XMSS_OBJS}
LIBSSH_OBJS=${LIBOPENSSH_OBJS} \
authfd.o authfile.o \
canohost.o channels.o cipher.o cipher-aes.o cipher-aesctr.o \
cleanup.o \
compat.o fatal.o hostfile.o \
log.o match.o moduli.o nchan.o packet.o \
readpass.o ttymodes.o xmalloc.o addr.o addrmatch.o \
atomicio.o dispatch.o mac.o misc.o utf8.o \
monitor_fdpass.o rijndael.o ssh-dss.o ssh-ecdsa.o ssh-ecdsa-sk.o \
ssh-ed25519-sk.o ssh-rsa.o dh.o \
msg.o progressmeter.o dns.o entropy.o gss-genr.o umac.o umac128.o \
ssh-pkcs11.o smult_curve25519_ref.o \
poly1305.o chacha.o cipher-chachapoly.o cipher-chachapoly-libcrypto.o \
ssh-ed25519.o digest-openssl.o digest-libc.o \
hmac.o ed25519.o hash.o \
kex.o kexdh.o kexgex.o kexecdh.o kexc25519.o \
kexgexc.o kexgexs.o \
kexsntrup761x25519.o sntrup761.o kexgen.o \
sftp-realpath.o platform-pledge.o platform-tracing.o platform-misc.o \
sshbuf-io.o
SKOBJS= ssh-sk-client.o
SSHOBJS= ssh.o readconf.o clientloop.o sshtty.o \
sshconnect.o sshconnect2.o mux.o $(SKOBJS)
SSHDOBJS=sshd.o auth-rhosts.o auth-passwd.o \
audit.o audit-bsm.o audit-linux.o platform.o \
sshpty.o sshlogin.o servconf.o serverloop.o \
auth.o auth2.o auth-options.o session.o \
auth2-chall.o groupaccess.o \
auth-bsdauth.o auth2-hostbased.o auth2-kbdint.o \
auth2-none.o auth2-passwd.o auth2-pubkey.o auth2-pubkeyfile.o \
monitor.o monitor_wrap.o auth-krb5.o \
auth2-gss.o gss-serv.o gss-serv-krb5.o \
loginrec.o auth-pam.o auth-shadow.o auth-sia.o \
srclimit.o sftp-server.o sftp-common.o \
sandbox-null.o sandbox-rlimit.o sandbox-systrace.o sandbox-darwin.o \
sandbox-seccomp-filter.o sandbox-capsicum.o sandbox-pledge.o \
sandbox-solaris.o uidswap.o $(SKOBJS)
SFTP_CLIENT_OBJS=sftp-common.o sftp-client.o sftp-glob.o
SCP_OBJS= scp.o progressmeter.o $(SFTP_CLIENT_OBJS)
SSHADD_OBJS= ssh-add.o $(SKOBJS)
SSHAGENT_OBJS= ssh-agent.o ssh-pkcs11-client.o $(SKOBJS)
SSHKEYGEN_OBJS= ssh-keygen.o sshsig.o $(SKOBJS)
SSHKEYSIGN_OBJS=ssh-keysign.o readconf.o uidswap.o $(SKOBJS)
P11HELPER_OBJS= ssh-pkcs11-helper.o ssh-pkcs11.o $(SKOBJS)
SKHELPER_OBJS= ssh-sk-helper.o ssh-sk.o sk-usbhid.o
SSHKEYSCAN_OBJS=ssh-keyscan.o $(SKOBJS)
SFTPSERVER_OBJS=sftp-common.o sftp-server.o sftp-server-main.o
SFTP_OBJS= sftp.o sftp-usergroup.o progressmeter.o $(SFTP_CLIENT_OBJS)
MANPAGES = moduli.5.out scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out ssh-keysign.8.out ssh-pkcs11-helper.8.out ssh-sk-helper.8.out sshd_config.5.out ssh_config.5.out
MANPAGES_IN = moduli.5 scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1 ssh-keysign.8 ssh-pkcs11-helper.8 ssh-sk-helper.8 sshd_config.5 ssh_config.5
MANTYPE = @MANTYPE@
CONFIGFILES=sshd_config.out ssh_config.out moduli.out
CONFIGFILES_IN=sshd_config ssh_config moduli
PATHSUBS = \
-e 's|/etc/ssh/ssh_config|$(sysconfdir)/ssh_config|g' \
-e 's|/etc/ssh/ssh_known_hosts|$(sysconfdir)/ssh_known_hosts|g' \
-e 's|/etc/ssh/sshd_config|$(sysconfdir)/sshd_config|g' \
-e 's|/usr/libexec|$(libexecdir)|g' \
-e 's|/etc/shosts.equiv|$(sysconfdir)/shosts.equiv|g' \
-e 's|/etc/ssh/ssh_host_key|$(sysconfdir)/ssh_host_key|g' \
-e 's|/etc/ssh/ssh_host_ecdsa_key|$(sysconfdir)/ssh_host_ecdsa_key|g' \
-e 's|/etc/ssh/ssh_host_dsa_key|$(sysconfdir)/ssh_host_dsa_key|g' \
-e 's|/etc/ssh/ssh_host_rsa_key|$(sysconfdir)/ssh_host_rsa_key|g' \
-e 's|/etc/ssh/ssh_host_ed25519_key|$(sysconfdir)/ssh_host_ed25519_key|g' \
-e 's|/var/run/sshd.pid|$(piddir)/sshd.pid|g' \
-e 's|/etc/moduli|$(sysconfdir)/moduli|g' \
-e 's|/etc/ssh/moduli|$(sysconfdir)/moduli|g' \
-e 's|/etc/ssh/sshrc|$(sysconfdir)/sshrc|g' \
-e 's|/usr/X11R6/bin/xauth|$(XAUTH_PATH)|g' \
-e 's|/var/empty|$(PRIVSEP_PATH)|g' \
-e 's|/usr/bin:/bin:/usr/sbin:/sbin|@user_path@|g'
FIXPATHSCMD = $(SED) $(PATHSUBS)
FIXALGORITHMSCMD= $(SHELL) $(srcdir)/fixalgorithms $(SED) \
@UNSUPPORTED_ALGORITHMS@
all: $(CONFIGFILES) $(MANPAGES) $(TARGETS)
$(LIBSSH_OBJS): Makefile.in config.h
$(SSHOBJS): Makefile.in config.h
$(SSHDOBJS): Makefile.in config.h
.c.o:
$(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $@
LIBCOMPAT=openbsd-compat/libopenbsd-compat.a
$(LIBCOMPAT): always
(cd openbsd-compat && $(MAKE))
always:
libssh.a: $(LIBSSH_OBJS)
$(AR) rv $@ $(LIBSSH_OBJS)
$(RANLIB) $@
ssh$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHOBJS)
$(LD) -o $@ $(SSHOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(GSSLIBS) $(CHANNELLIBS)
sshd$(EXEEXT): libssh.a $(LIBCOMPAT) $(SSHDOBJS)
$(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(SSHDLIBS) $(LIBS) $(GSSLIBS) $(K5LIBS) $(CHANNELLIBS)
scp$(EXEEXT): $(LIBCOMPAT) libssh.a $(SCP_OBJS)
$(LD) -o $@ $(SCP_OBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHADD_OBJS)
$(LD) -o $@ $(SSHADD_OBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(CHANNELLIBS)
ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHAGENT_OBJS)
$(LD) -o $@ $(SSHAGENT_OBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(CHANNELLIBS)
ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHKEYGEN_OBJS)
$(LD) -o $@ $(SSHKEYGEN_OBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(CHANNELLIBS)
ssh-keysign$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHKEYSIGN_OBJS)
$(LD) -o $@ $(SSHKEYSIGN_OBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(CHANNELLIBS)
ssh-pkcs11-helper$(EXEEXT): $(LIBCOMPAT) libssh.a $(P11HELPER_OBJS)
$(LD) -o $@ $(P11HELPER_OBJS) $(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS) $(CHANNELLIBS)
ssh-sk-helper$(EXEEXT): $(LIBCOMPAT) libssh.a $(SKHELPER_OBJS)
$(LD) -o $@ $(SKHELPER_OBJS) $(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS) $(LIBFIDO2) $(CHANNELLIBS)
ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHKEYSCAN_OBJS)
$(LD) -o $@ $(SSHKEYSCAN_OBJS) $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS) $(CHANNELLIBS)
sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a $(SFTPSERVER_OBJS)
$(LD) -o $@ $(SFTPSERVER_OBJS) $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS)
sftp$(EXEEXT): $(LIBCOMPAT) libssh.a $(SFTP_OBJS)
$(LD) -o $@ $(SFTP_OBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(LIBEDIT)
# test driver for the loginrec code - not built by default
logintest: logintest.o $(LIBCOMPAT) libssh.a loginrec.o
$(LD) -o $@ logintest.o $(LDFLAGS) loginrec.o -lopenbsd-compat -lssh $(LIBS)
$(MANPAGES): $(MANPAGES_IN)
if test "$(MANTYPE)" = "cat"; then \
manpage=$(srcdir)/`echo $@ | sed 's/\.[1-9]\.out$$/\.0/'`; \
else \
manpage=$(srcdir)/`echo $@ | sed 's/\.out$$//'`; \
fi; \
if test "$(MANTYPE)" = "man"; then \
$(FIXPATHSCMD) $${manpage} | $(FIXALGORITHMSCMD) | \
$(AWK) -f $(srcdir)/mdoc2man.awk > $@; \
else \
$(FIXPATHSCMD) $${manpage} | $(FIXALGORITHMSCMD) > $@; \
fi
$(CONFIGFILES): $(CONFIGFILES_IN)
conffile=`echo $@ | sed 's/.out$$//'`; \
$(FIXPATHSCMD) $(srcdir)/$${conffile} > $@
# fake rule to stop make trying to compile moduli.o into a binary "moduli.o"
moduli:
echo
clean: regressclean
rm -f *.o *.lo *.a $(TARGETS) logintest config.cache config.log
rm -f *.out core survey
rm -f regress/check-perm$(EXEEXT)
rm -f regress/mkdtemp$(EXEEXT)
rm -f regress/unittests/test_helper/*.a
rm -f regress/unittests/test_helper/*.o
rm -f regress/unittests/authopt/*.o
rm -f regress/unittests/authopt/test_authopt$(EXEEXT)
rm -f regress/unittests/bitmap/*.o
rm -f regress/unittests/bitmap/test_bitmap$(EXEEXT)
rm -f regress/unittests/conversion/*.o
rm -f regress/unittests/conversion/test_conversion$(EXEEXT)
rm -f regress/unittests/hostkeys/*.o
rm -f regress/unittests/hostkeys/test_hostkeys$(EXEEXT)
rm -f regress/unittests/kex/*.o
rm -f regress/unittests/kex/test_kex$(EXEEXT)
rm -f regress/unittests/match/*.o
rm -f regress/unittests/match/test_match$(EXEEXT)
rm -f regress/unittests/misc/*.o
rm -f regress/unittests/misc/test_misc$(EXEEXT)
rm -f regress/unittests/sshbuf/*.o
rm -f regress/unittests/sshbuf/test_sshbuf$(EXEEXT)
rm -f regress/unittests/sshkey/*.o
rm -f regress/unittests/sshkey/test_sshkey$(EXEEXT)
rm -f regress/unittests/sshsig/*.o
rm -f regress/unittests/sshsig/test_sshsig$(EXEEXT)
rm -f regress/unittests/utf8/*.o
rm -f regress/unittests/utf8/test_utf8$(EXEEXT)
rm -f regress/misc/sk-dummy/*.o
rm -f regress/misc/sk-dummy/*.lo
rm -f regress/misc/sk-dummy/sk-dummy.so
(cd openbsd-compat && $(MAKE) clean)
distclean: regressclean
rm -f *.o *.a $(TARGETS) logintest config.cache config.log
rm -f *.out core opensshd.init openssh.xml
rm -f Makefile buildpkg.sh config.h config.status
rm -f survey.sh openbsd-compat/regress/Makefile *~
rm -rf autom4te.cache
rm -f regress/check-perm
rm -f regress/mkdtemp
rm -f regress/unittests/test_helper/*.a
rm -f regress/unittests/test_helper/*.o
rm -f regress/unittests/authopt/*.o
rm -f regress/unittests/authopt/test_authopt
rm -f regress/unittests/bitmap/*.o
rm -f regress/unittests/bitmap/test_bitmap
rm -f regress/unittests/conversion/*.o
rm -f regress/unittests/conversion/test_conversion
rm -f regress/unittests/hostkeys/*.o
rm -f regress/unittests/hostkeys/test_hostkeys
rm -f regress/unittests/kex/*.o
rm -f regress/unittests/kex/test_kex
rm -f regress/unittests/match/*.o
rm -f regress/unittests/match/test_match
rm -f regress/unittests/misc/*.o
rm -f regress/unittests/misc/test_misc
rm -f regress/unittests/sshbuf/*.o
rm -f regress/unittests/sshbuf/test_sshbuf
rm -f regress/unittests/sshkey/*.o
rm -f regress/unittests/sshkey/test_sshkey
rm -f regress/unittests/sshsig/*.o
rm -f regress/unittests/sshsig/test_sshsig
rm -f regress/unittests/utf8/*.o
rm -f regress/unittests/utf8/test_utf8
rm -f regress/misc/sk-dummy/*.o
rm -f regress/misc/sk-dummy/*.lo
rm -f regress/misc/sk-dummy/sk-dummy.so
(cd openbsd-compat && $(MAKE) distclean)
if test -d pkg ; then \
rm -fr pkg ; \
fi
veryclean: distclean
rm -f configure config.h.in *.0
cleandir: veryclean
mrproper: veryclean
realclean: veryclean
catman-do:
@for f in $(MANPAGES_IN) ; do \
base=`echo $$f | sed 's/\..*$$//'` ; \
echo "$$f -> $$base.0" ; \
$(MANFMT) $$f | cat -v | sed -e 's/.\^H//g' \
>$$base.0 ; \
done
depend: depend-rebuild
rm -f .depend.bak
depend-rebuild:
mv .depend .depend.old
rm -f config.h .depend
touch config.h .depend
makedepend -w1000 -Y. -f .depend *.c 2>/dev/null
(echo '# Automatically generated by makedepend.'; \
echo '# Run "make depend" to rebuild.'; sort .depend ) >.depend.tmp
mv .depend.tmp .depend
rm -f .depend.bak
mv .depend.old .depend.bak
rm -f config.h
depend-check: depend-rebuild
cmp .depend .depend.bak || (echo .depend stale && exit 1)
distprep: catman-do depend-check
$(AUTORECONF)
-rm -rf autom4te.cache .depend.bak
install: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files install-sysconf host-key check-config
install-nokeys: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files install-sysconf
install-nosysconf: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files
check-config:
-$(DESTDIR)$(sbindir)/sshd -t -f $(DESTDIR)$(sysconfdir)/sshd_config
install-files:
$(MKDIR_P) $(DESTDIR)$(bindir)
$(MKDIR_P) $(DESTDIR)$(sbindir)
$(MKDIR_P) $(DESTDIR)$(mandir)/$(mansubdir)1
$(MKDIR_P) $(DESTDIR)$(mandir)/$(mansubdir)5
$(MKDIR_P) $(DESTDIR)$(mandir)/$(mansubdir)8
$(MKDIR_P) $(DESTDIR)$(libexecdir)
$(MKDIR_P) -m 0755 $(DESTDIR)$(PRIVSEP_PATH)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh$(EXEEXT) $(DESTDIR)$(bindir)/ssh$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) scp$(EXEEXT) $(DESTDIR)$(bindir)/scp$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-add$(EXEEXT) $(DESTDIR)$(bindir)/ssh-add$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-agent$(EXEEXT) $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-keygen$(EXEEXT) $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-keyscan$(EXEEXT) $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) sshd$(EXEEXT) $(DESTDIR)$(sbindir)/sshd$(EXEEXT)
$(INSTALL) -m 4711 $(STRIP_OPT) ssh-keysign$(EXEEXT) $(DESTDIR)$(SSH_KEYSIGN)$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-pkcs11-helper$(EXEEXT) $(DESTDIR)$(SSH_PKCS11_HELPER)$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-sk-helper$(EXEEXT) $(DESTDIR)$(SSH_SK_HELPER)$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) sftp$(EXEEXT) $(DESTDIR)$(bindir)/sftp$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) sftp-server$(EXEEXT) $(DESTDIR)$(SFTP_SERVER)$(EXEEXT)
$(INSTALL) -m 644 ssh.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
$(INSTALL) -m 644 scp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
$(INSTALL) -m 644 ssh-add.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
$(INSTALL) -m 644 ssh-agent.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
$(INSTALL) -m 644 ssh-keygen.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
$(INSTALL) -m 644 ssh-keyscan.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
$(INSTALL) -m 644 moduli.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/moduli.5
$(INSTALL) -m 644 sshd_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/sshd_config.5
$(INSTALL) -m 644 ssh_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/ssh_config.5
$(INSTALL) -m 644 sshd.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
$(INSTALL) -m 644 sftp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
$(INSTALL) -m 644 sftp-server.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
$(INSTALL) -m 644 ssh-keysign.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8
$(INSTALL) -m 644 ssh-pkcs11-helper.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-pkcs11-helper.8
$(INSTALL) -m 644 ssh-sk-helper.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-sk-helper.8
install-sysconf:
$(MKDIR_P) $(DESTDIR)$(sysconfdir)
@if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_config ]; then \
$(INSTALL) -m 644 ssh_config.out $(DESTDIR)$(sysconfdir)/ssh_config; \
else \
echo "$(DESTDIR)$(sysconfdir)/ssh_config already exists, install will not overwrite"; \
fi
@if [ ! -f $(DESTDIR)$(sysconfdir)/sshd_config ]; then \
$(INSTALL) -m 644 sshd_config.out $(DESTDIR)$(sysconfdir)/sshd_config; \
else \
echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \
fi
@if [ ! -f $(DESTDIR)$(sysconfdir)/moduli ]; then \
if [ -f $(DESTDIR)$(sysconfdir)/primes ]; then \
echo "moving $(DESTDIR)$(sysconfdir)/primes to $(DESTDIR)$(sysconfdir)/moduli"; \
mv "$(DESTDIR)$(sysconfdir)/primes" "$(DESTDIR)$(sysconfdir)/moduli"; \
else \
$(INSTALL) -m 644 moduli.out $(DESTDIR)$(sysconfdir)/moduli; \
fi ; \
else \
echo "$(DESTDIR)$(sysconfdir)/moduli already exists, install will not overwrite"; \
fi
host-key: ssh-keygen$(EXEEXT)
@if [ -z "$(DESTDIR)" ] ; then \
./ssh-keygen -A; \
fi
host-key-force: ssh-keygen$(EXEEXT) ssh$(EXEEXT)
./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N ""
./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N ""
./ssh-keygen -t ed25519 -f $(DESTDIR)$(sysconfdir)/ssh_host_ed25519_key -N ""
if ./ssh -Q key | grep ecdsa >/dev/null ; then \
./ssh-keygen -t ecdsa -f $(DESTDIR)$(sysconfdir)/ssh_host_ecdsa_key -N ""; \
fi
uninstallall: uninstall
-rm -f $(DESTDIR)$(sysconfdir)/ssh_config
-rm -f $(DESTDIR)$(sysconfdir)/sshd_config
-rmdir $(DESTDIR)$(sysconfdir)
-rmdir $(DESTDIR)$(bindir)
-rmdir $(DESTDIR)$(sbindir)
-rmdir $(DESTDIR)$(mandir)/$(mansubdir)1
-rmdir $(DESTDIR)$(mandir)/$(mansubdir)8
-rmdir $(DESTDIR)$(mandir)
-rmdir $(DESTDIR)$(libexecdir)
uninstall:
-rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-add$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/sftp$(EXEEXT)
-rm -f $(DESTDIR)$(sbindir)/sshd$(EXEEXT)
-rm -r $(DESTDIR)$(SFTP_SERVER)$(EXEEXT)
-rm -f $(DESTDIR)$(SSH_KEYSIGN)$(EXEEXT)
-rm -f $(DESTDIR)$(SSH_PKCS11_HELPER)$(EXEEXT)
-rm -f $(DESTDIR)$(SSH_SK_HELPER)$(EXEEXT)
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-pkcs11-helper.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-sk-helper.8
regress-prep:
$(MKDIR_P) `pwd`/regress/unittests/test_helper
$(MKDIR_P) `pwd`/regress/unittests/authopt
$(MKDIR_P) `pwd`/regress/unittests/bitmap
$(MKDIR_P) `pwd`/regress/unittests/conversion
$(MKDIR_P) `pwd`/regress/unittests/hostkeys
$(MKDIR_P) `pwd`/regress/unittests/kex
$(MKDIR_P) `pwd`/regress/unittests/match
$(MKDIR_P) `pwd`/regress/unittests/misc
$(MKDIR_P) `pwd`/regress/unittests/sshbuf
$(MKDIR_P) `pwd`/regress/unittests/sshkey
$(MKDIR_P) `pwd`/regress/unittests/sshsig
$(MKDIR_P) `pwd`/regress/unittests/utf8
$(MKDIR_P) `pwd`/regress/misc/sk-dummy
[ -f `pwd`/regress/Makefile ] || \
ln -s `cd $(srcdir) && pwd`/regress/Makefile `pwd`/regress/Makefile
REGRESSLIBS=libssh.a $(LIBCOMPAT)
TESTLIBS=$(LIBS) $(CHANNELLIBS)
regress/modpipe$(EXEEXT): $(srcdir)/regress/modpipe.c $(REGRESSLIBS)
$(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/regress/modpipe.c \
$(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
regress/setuid-allowed$(EXEEXT): $(srcdir)/regress/setuid-allowed.c $(REGRESSLIBS)
$(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/regress/setuid-allowed.c \
$(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
regress/netcat$(EXEEXT): $(srcdir)/regress/netcat.c $(REGRESSLIBS)
$(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/regress/netcat.c \
$(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
regress/check-perm$(EXEEXT): $(srcdir)/regress/check-perm.c $(REGRESSLIBS)
$(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/regress/check-perm.c \
$(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
regress/mkdtemp$(EXEEXT): $(srcdir)/regress/mkdtemp.c $(REGRESSLIBS)
$(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/regress/mkdtemp.c \
$(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
UNITTESTS_TEST_HELPER_OBJS=\
regress/unittests/test_helper/test_helper.o \
regress/unittests/test_helper/fuzz.o
regress/unittests/test_helper/libtest_helper.a: ${UNITTESTS_TEST_HELPER_OBJS}
$(AR) rv $@ $(UNITTESTS_TEST_HELPER_OBJS)
$(RANLIB) $@
UNITTESTS_TEST_SSHBUF_OBJS=\
regress/unittests/sshbuf/tests.o \
regress/unittests/sshbuf/test_sshbuf.o \
regress/unittests/sshbuf/test_sshbuf_getput_basic.o \
regress/unittests/sshbuf/test_sshbuf_getput_crypto.o \
regress/unittests/sshbuf/test_sshbuf_misc.o \
regress/unittests/sshbuf/test_sshbuf_fuzz.o \
regress/unittests/sshbuf/test_sshbuf_getput_fuzz.o \
regress/unittests/sshbuf/test_sshbuf_fixed.o
regress/unittests/sshbuf/test_sshbuf$(EXEEXT): ${UNITTESTS_TEST_SSHBUF_OBJS} \
regress/unittests/test_helper/libtest_helper.a libssh.a
$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_SSHBUF_OBJS) \
regress/unittests/test_helper/libtest_helper.a \
-lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
UNITTESTS_TEST_SSHKEY_OBJS=\
regress/unittests/sshkey/test_fuzz.o \
regress/unittests/sshkey/tests.o \
regress/unittests/sshkey/common.o \
regress/unittests/sshkey/test_file.o \
regress/unittests/sshkey/test_sshkey.o \
$(SKOBJS)
regress/unittests/sshkey/test_sshkey$(EXEEXT): ${UNITTESTS_TEST_SSHKEY_OBJS} \
regress/unittests/test_helper/libtest_helper.a libssh.a
$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_SSHKEY_OBJS) \
regress/unittests/test_helper/libtest_helper.a \
-lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
UNITTESTS_TEST_SSHSIG_OBJS=\
sshsig.o \
regress/unittests/sshsig/tests.o \
$(SKOBJS)
regress/unittests/sshsig/test_sshsig$(EXEEXT): ${UNITTESTS_TEST_SSHSIG_OBJS} \
regress/unittests/test_helper/libtest_helper.a libssh.a
$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_SSHSIG_OBJS) \
regress/unittests/test_helper/libtest_helper.a \
-lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
UNITTESTS_TEST_BITMAP_OBJS=\
regress/unittests/bitmap/tests.o
regress/unittests/bitmap/test_bitmap$(EXEEXT): ${UNITTESTS_TEST_BITMAP_OBJS} \
regress/unittests/test_helper/libtest_helper.a libssh.a
$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_BITMAP_OBJS) \
regress/unittests/test_helper/libtest_helper.a \
-lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
UNITTESTS_TEST_AUTHOPT_OBJS=\
regress/unittests/authopt/tests.o \
auth-options.o \
$(SKOBJS)
regress/unittests/authopt/test_authopt$(EXEEXT): \
${UNITTESTS_TEST_AUTHOPT_OBJS} \
regress/unittests/test_helper/libtest_helper.a libssh.a
$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_AUTHOPT_OBJS) \
regress/unittests/test_helper/libtest_helper.a \
-lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
UNITTESTS_TEST_CONVERSION_OBJS=\
regress/unittests/conversion/tests.o
regress/unittests/conversion/test_conversion$(EXEEXT): \
${UNITTESTS_TEST_CONVERSION_OBJS} \
regress/unittests/test_helper/libtest_helper.a libssh.a
$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_CONVERSION_OBJS) \
regress/unittests/test_helper/libtest_helper.a \
-lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
UNITTESTS_TEST_KEX_OBJS=\
regress/unittests/kex/tests.o \
regress/unittests/kex/test_kex.o \
regress/unittests/kex/test_proposal.o \
$(SKOBJS)
regress/unittests/kex/test_kex$(EXEEXT): ${UNITTESTS_TEST_KEX_OBJS} \
regress/unittests/test_helper/libtest_helper.a libssh.a
$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_KEX_OBJS) \
regress/unittests/test_helper/libtest_helper.a \
-lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
UNITTESTS_TEST_HOSTKEYS_OBJS=\
regress/unittests/hostkeys/tests.o \
regress/unittests/hostkeys/test_iterate.o \
$(SKOBJS)
regress/unittests/hostkeys/test_hostkeys$(EXEEXT): \
${UNITTESTS_TEST_HOSTKEYS_OBJS} \
regress/unittests/test_helper/libtest_helper.a libssh.a
$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_HOSTKEYS_OBJS) \
regress/unittests/test_helper/libtest_helper.a \
-lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
UNITTESTS_TEST_MATCH_OBJS=\
regress/unittests/match/tests.o
regress/unittests/match/test_match$(EXEEXT): \
${UNITTESTS_TEST_MATCH_OBJS} \
regress/unittests/test_helper/libtest_helper.a libssh.a
$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_MATCH_OBJS) \
regress/unittests/test_helper/libtest_helper.a \
-lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
UNITTESTS_TEST_MISC_OBJS=\
regress/unittests/misc/tests.o \
regress/unittests/misc/test_parse.o \
regress/unittests/misc/test_expand.o \
regress/unittests/misc/test_convtime.o \
regress/unittests/misc/test_argv.o \
regress/unittests/misc/test_strdelim.o \
regress/unittests/misc/test_hpdelim.o \
regress/unittests/misc/test_ptimeout.o
regress/unittests/misc/test_misc$(EXEEXT): \
${UNITTESTS_TEST_MISC_OBJS} \
regress/unittests/test_helper/libtest_helper.a libssh.a
$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_MISC_OBJS) \
regress/unittests/test_helper/libtest_helper.a \
-lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
UNITTESTS_TEST_UTF8_OBJS=\
regress/unittests/utf8/tests.o
regress/unittests/utf8/test_utf8$(EXEEXT): \
${UNITTESTS_TEST_UTF8_OBJS} \
regress/unittests/test_helper/libtest_helper.a libssh.a
$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_UTF8_OBJS) \
regress/unittests/test_helper/libtest_helper.a \
-lssh -lopenbsd-compat -lssh -lopenbsd-compat $(TESTLIBS)
# These all need to be compiled -fPIC, so they are treated differently.
SK_DUMMY_OBJS=\
regress/misc/sk-dummy/sk-dummy.lo \
regress/misc/sk-dummy/fatal.lo \
ed25519.lo hash.lo
SK_DUMMY_LIBRARY=@SK_DUMMY_LIBRARY@
.c.lo: Makefile.in config.h
$(CC) $(CFLAGS_NOPIE) $(PICFLAG) $(CPPFLAGS) -c $< -o $@
regress/misc/sk-dummy/sk-dummy.so: $(SK_DUMMY_OBJS)
$(CC) $(CFLAGS) $(CPPFLAGS) $(PICFLAG) -shared -o $@ $(SK_DUMMY_OBJS) \
-L. -Lopenbsd-compat -lopenbsd-compat $(LDFLAGS_NOPIE) $(TESTLIBS)
regress-binaries: regress-prep $(LIBCOMPAT) \
regress/modpipe$(EXEEXT) \
regress/setuid-allowed$(EXEEXT) \
regress/netcat$(EXEEXT) \
regress/check-perm$(EXEEXT) \
regress/mkdtemp$(EXEEXT) \
$(SK_DUMMY_LIBRARY)
regress-unit-binaries: regress-prep $(REGRESSLIBS) \
regress/unittests/authopt/test_authopt$(EXEEXT) \
regress/unittests/bitmap/test_bitmap$(EXEEXT) \
regress/unittests/conversion/test_conversion$(EXEEXT) \
regress/unittests/hostkeys/test_hostkeys$(EXEEXT) \
regress/unittests/kex/test_kex$(EXEEXT) \
regress/unittests/match/test_match$(EXEEXT) \
regress/unittests/misc/test_misc$(EXEEXT) \
regress/unittests/sshbuf/test_sshbuf$(EXEEXT) \
regress/unittests/sshkey/test_sshkey$(EXEEXT) \
regress/unittests/sshsig/test_sshsig$(EXEEXT) \
regress/unittests/utf8/test_utf8$(EXEEXT)
tests: file-tests t-exec interop-tests unit
echo all tests passed
unit: regress-unit-binaries
cd $(srcdir)/regress || exit $$?; \
$(MAKE) \
.CURDIR="$(abs_top_srcdir)/regress" \
.OBJDIR="$(BUILDDIR)/regress" \
OBJ="$(BUILDDIR)/regress" \
$@ && echo $@ tests passed
interop-tests t-exec file-tests: regress-prep regress-binaries $(TARGETS)
cd $(srcdir)/regress || exit $$?; \
EGREP='@EGREP@' \
OPENSSL_BIN='@OPENSSL_BIN@' \
$(MAKE) \
.CURDIR="$(abs_top_srcdir)/regress" \
.OBJDIR="$(BUILDDIR)/regress" \
BUILDDIR="$(BUILDDIR)" \
OBJ="$(BUILDDIR)/regress" \
PATH="$(BUILDDIR):$${PATH}" \
TEST_ENV=MALLOC_OPTIONS="@TEST_MALLOC_OPTIONS@" \
TEST_MALLOC_OPTIONS="@TEST_MALLOC_OPTIONS@" \
TEST_SSH_SCP="$(BUILDDIR)/scp" \
TEST_SSH_SSH="$(BUILDDIR)/ssh" \
TEST_SSH_SSHD="$(BUILDDIR)/sshd" \
TEST_SSH_SSHAGENT="$(BUILDDIR)/ssh-agent" \
TEST_SSH_SSHADD="$(BUILDDIR)/ssh-add" \
TEST_SSH_SSHKEYGEN="$(BUILDDIR)/ssh-keygen" \
TEST_SSH_SSHPKCS11HELPER="$(BUILDDIR)/ssh-pkcs11-helper" \
TEST_SSH_SSHKEYSCAN="$(BUILDDIR)/ssh-keyscan" \
TEST_SSH_SFTP="$(BUILDDIR)/sftp" \
TEST_SSH_PKCS11_HELPER="$(BUILDDIR)/ssh-pkcs11-helper" \
TEST_SSH_SK_HELPER="$(BUILDDIR)/ssh-sk-helper" \
TEST_SSH_SFTPSERVER="$(BUILDDIR)/sftp-server" \
TEST_SSH_MODULI_FILE="$(abs_top_srcdir)/moduli" \
TEST_SSH_PLINK="plink" \
TEST_SSH_PUTTYGEN="puttygen" \
TEST_SSH_CONCH="conch" \
TEST_SSH_IPV6="@TEST_SSH_IPV6@" \
TEST_SSH_UTF8="@TEST_SSH_UTF8@" \
TEST_SHELL="$(TEST_SHELL)" \
EXEEXT="$(EXEEXT)" \
$@ && echo all $@ passed
compat-tests: $(LIBCOMPAT)
(cd openbsd-compat/regress && $(MAKE))
regressclean:
if [ -f regress/Makefile ] && [ -r regress/Makefile ]; then \
(cd regress && $(MAKE) clean) \
fi
survey: survey.sh ssh
@$(SHELL) ./survey.sh > survey
@echo 'The survey results have been placed in the file "survey" in the'
@echo 'current directory. Please review the file then send with'
@echo '"make send-survey".'
send-survey: survey
mail portable-survey@mindrot.org <survey
package: $(CONFIGFILES) $(MANPAGES) $(TARGETS)
if [ "@MAKE_PACKAGE_SUPPORTED@" = yes ]; then \
sh buildpkg.sh; \
fi
# @DEPEND@
Reference in New Issue View Git Blame Copy Permalink