freebsd-dev/sys/dev/usb/serial/ucycom.c
Hans Petter Selasky c01fc06ee9 Revert r239178 and implement two new functions, namely
"device_free_softc()" and "device_claim_softc()",
to allow USB serial drivers refcounting the softc.
These functions are used to grab the softc from
auto-free and to free the softc back to the correct
malloc type, respectivly.

Discussed with:	jhb
MFC after:	2 weeks
2012-08-15 15:42:57 +00:00

612 lines
14 KiB
C

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*-
* Copyright (c) 2004 Dag-Erling Coïdan Smørgrav
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Device driver for Cypress CY7C637xx and CY7C640/1xx series USB to
* RS232 bridges.
*/
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbhid.h>
#include "usbdevs.h"
#define USB_DEBUG_VAR usb_debug
#include <dev/usb/usb_debug.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/serial/usb_serial.h>
#define UCYCOM_MAX_IOLEN (1024 + 2) /* bytes */
#define UCYCOM_IFACE_INDEX 0
enum {
UCYCOM_CTRL_RD,
UCYCOM_INTR_RD,
UCYCOM_N_TRANSFER,
};
struct ucycom_softc {
struct ucom_super_softc sc_super_ucom;
struct ucom_softc sc_ucom;
struct usb_device *sc_udev;
struct usb_xfer *sc_xfer[UCYCOM_N_TRANSFER];
struct mtx sc_mtx;
uint32_t sc_model;
#define MODEL_CY7C63743 0x63743
#define MODEL_CY7C64013 0x64013
uint16_t sc_flen; /* feature report length */
uint16_t sc_ilen; /* input report length */
uint16_t sc_olen; /* output report length */
uint8_t sc_fid; /* feature report id */
uint8_t sc_iid; /* input report id */
uint8_t sc_oid; /* output report id */
uint8_t sc_cfg;
#define UCYCOM_CFG_RESET 0x80
#define UCYCOM_CFG_PARODD 0x20
#define UCYCOM_CFG_PAREN 0x10
#define UCYCOM_CFG_STOPB 0x08
#define UCYCOM_CFG_DATAB 0x03
uint8_t sc_ist; /* status flags from last input */
uint8_t sc_iface_no;
uint8_t sc_temp_cfg[32];
};
/* prototypes */
static device_probe_t ucycom_probe;
static device_attach_t ucycom_attach;
static device_detach_t ucycom_detach;
static void ucycom_free_softc(struct ucycom_softc *);
static usb_callback_t ucycom_ctrl_write_callback;
static usb_callback_t ucycom_intr_read_callback;
static void ucycom_free(struct ucom_softc *);
static void ucycom_cfg_open(struct ucom_softc *);
static void ucycom_start_read(struct ucom_softc *);
static void ucycom_stop_read(struct ucom_softc *);
static void ucycom_start_write(struct ucom_softc *);
static void ucycom_stop_write(struct ucom_softc *);
static void ucycom_cfg_write(struct ucycom_softc *, uint32_t, uint8_t);
static int ucycom_pre_param(struct ucom_softc *, struct termios *);
static void ucycom_cfg_param(struct ucom_softc *, struct termios *);
static void ucycom_poll(struct ucom_softc *ucom);
static const struct usb_config ucycom_config[UCYCOM_N_TRANSFER] = {
[UCYCOM_CTRL_RD] = {
.type = UE_CONTROL,
.endpoint = 0x00, /* Control pipe */
.direction = UE_DIR_ANY,
.bufsize = (sizeof(struct usb_device_request) + UCYCOM_MAX_IOLEN),
.callback = &ucycom_ctrl_write_callback,
.timeout = 1000, /* 1 second */
},
[UCYCOM_INTR_RD] = {
.type = UE_INTERRUPT,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_IN,
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
.bufsize = UCYCOM_MAX_IOLEN,
.callback = &ucycom_intr_read_callback,
},
};
static const struct ucom_callback ucycom_callback = {
.ucom_cfg_param = &ucycom_cfg_param,
.ucom_cfg_open = &ucycom_cfg_open,
.ucom_pre_param = &ucycom_pre_param,
.ucom_start_read = &ucycom_start_read,
.ucom_stop_read = &ucycom_stop_read,
.ucom_start_write = &ucycom_start_write,
.ucom_stop_write = &ucycom_stop_write,
.ucom_poll = &ucycom_poll,
.ucom_free = &ucycom_free,
};
static device_method_t ucycom_methods[] = {
DEVMETHOD(device_probe, ucycom_probe),
DEVMETHOD(device_attach, ucycom_attach),
DEVMETHOD(device_detach, ucycom_detach),
DEVMETHOD_END
};
static devclass_t ucycom_devclass;
static driver_t ucycom_driver = {
.name = "ucycom",
.methods = ucycom_methods,
.size = sizeof(struct ucycom_softc),
};
DRIVER_MODULE(ucycom, uhub, ucycom_driver, ucycom_devclass, NULL, 0);
MODULE_DEPEND(ucycom, ucom, 1, 1, 1);
MODULE_DEPEND(ucycom, usb, 1, 1, 1);
MODULE_VERSION(ucycom, 1);
/*
* Supported devices
*/
static const STRUCT_USB_HOST_ID ucycom_devs[] = {
{USB_VPI(USB_VENDOR_DELORME, USB_PRODUCT_DELORME_EARTHMATE, MODEL_CY7C64013)},
};
#define UCYCOM_DEFAULT_RATE 4800
#define UCYCOM_DEFAULT_CFG 0x03 /* N-8-1 */
static int
ucycom_probe(device_t dev)
{
struct usb_attach_arg *uaa = device_get_ivars(dev);
if (uaa->usb_mode != USB_MODE_HOST) {
return (ENXIO);
}
if (uaa->info.bConfigIndex != 0) {
return (ENXIO);
}
if (uaa->info.bIfaceIndex != UCYCOM_IFACE_INDEX) {
return (ENXIO);
}
return (usbd_lookup_id_by_uaa(ucycom_devs, sizeof(ucycom_devs), uaa));
}
static int
ucycom_attach(device_t dev)
{
struct usb_attach_arg *uaa = device_get_ivars(dev);
struct ucycom_softc *sc = device_get_softc(dev);
void *urd_ptr = NULL;
int32_t error;
uint16_t urd_len;
uint8_t iface_index;
sc->sc_udev = uaa->device;
device_set_usb_desc(dev);
mtx_init(&sc->sc_mtx, "ucycom", NULL, MTX_DEF);
ucom_ref(&sc->sc_super_ucom);
DPRINTF("\n");
/* get chip model */
sc->sc_model = USB_GET_DRIVER_INFO(uaa);
if (sc->sc_model == 0) {
device_printf(dev, "unsupported device\n");
goto detach;
}
device_printf(dev, "Cypress CY7C%X USB to RS232 bridge\n", sc->sc_model);
/* get report descriptor */
error = usbd_req_get_hid_desc(uaa->device, NULL,
&urd_ptr, &urd_len, M_USBDEV,
UCYCOM_IFACE_INDEX);
if (error) {
device_printf(dev, "failed to get report "
"descriptor: %s\n",
usbd_errstr(error));
goto detach;
}
/* get report sizes */
sc->sc_flen = hid_report_size(urd_ptr, urd_len, hid_feature, &sc->sc_fid);
sc->sc_ilen = hid_report_size(urd_ptr, urd_len, hid_input, &sc->sc_iid);
sc->sc_olen = hid_report_size(urd_ptr, urd_len, hid_output, &sc->sc_oid);
if ((sc->sc_ilen > UCYCOM_MAX_IOLEN) || (sc->sc_ilen < 1) ||
(sc->sc_olen > UCYCOM_MAX_IOLEN) || (sc->sc_olen < 2) ||
(sc->sc_flen > UCYCOM_MAX_IOLEN) || (sc->sc_flen < 5)) {
device_printf(dev, "invalid report size i=%d, o=%d, f=%d, max=%d\n",
sc->sc_ilen, sc->sc_olen, sc->sc_flen,
UCYCOM_MAX_IOLEN);
goto detach;
}
sc->sc_iface_no = uaa->info.bIfaceNum;
iface_index = UCYCOM_IFACE_INDEX;
error = usbd_transfer_setup(uaa->device, &iface_index,
sc->sc_xfer, ucycom_config, UCYCOM_N_TRANSFER,
sc, &sc->sc_mtx);
if (error) {
device_printf(dev, "allocating USB "
"transfers failed\n");
goto detach;
}
error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
&ucycom_callback, &sc->sc_mtx);
if (error) {
goto detach;
}
ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
if (urd_ptr) {
free(urd_ptr, M_USBDEV);
}
return (0); /* success */
detach:
if (urd_ptr) {
free(urd_ptr, M_USBDEV);
}
ucycom_detach(dev);
return (ENXIO);
}
static int
ucycom_detach(device_t dev)
{
struct ucycom_softc *sc = device_get_softc(dev);
ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
usbd_transfer_unsetup(sc->sc_xfer, UCYCOM_N_TRANSFER);
device_claim_softc(dev);
ucycom_free_softc(sc);
return (0);
}
UCOM_UNLOAD_DRAIN(ucycom);
static void
ucycom_free_softc(struct ucycom_softc *sc)
{
if (ucom_unref(&sc->sc_super_ucom)) {
mtx_destroy(&sc->sc_mtx);
device_free_softc(sc);
}
}
static void
ucycom_free(struct ucom_softc *ucom)
{
ucycom_free_softc(ucom->sc_parent);
}
static void
ucycom_cfg_open(struct ucom_softc *ucom)
{
struct ucycom_softc *sc = ucom->sc_parent;
/* set default configuration */
ucycom_cfg_write(sc, UCYCOM_DEFAULT_RATE, UCYCOM_DEFAULT_CFG);
}
static void
ucycom_start_read(struct ucom_softc *ucom)
{
struct ucycom_softc *sc = ucom->sc_parent;
usbd_transfer_start(sc->sc_xfer[UCYCOM_INTR_RD]);
}
static void
ucycom_stop_read(struct ucom_softc *ucom)
{
struct ucycom_softc *sc = ucom->sc_parent;
usbd_transfer_stop(sc->sc_xfer[UCYCOM_INTR_RD]);
}
static void
ucycom_start_write(struct ucom_softc *ucom)
{
struct ucycom_softc *sc = ucom->sc_parent;
usbd_transfer_start(sc->sc_xfer[UCYCOM_CTRL_RD]);
}
static void
ucycom_stop_write(struct ucom_softc *ucom)
{
struct ucycom_softc *sc = ucom->sc_parent;
usbd_transfer_stop(sc->sc_xfer[UCYCOM_CTRL_RD]);
}
static void
ucycom_ctrl_write_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct ucycom_softc *sc = usbd_xfer_softc(xfer);
struct usb_device_request req;
struct usb_page_cache *pc0, *pc1;
uint8_t data[2];
uint8_t offset;
uint32_t actlen;
pc0 = usbd_xfer_get_frame(xfer, 0);
pc1 = usbd_xfer_get_frame(xfer, 1);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
tr_transferred:
case USB_ST_SETUP:
switch (sc->sc_model) {
case MODEL_CY7C63743:
offset = 1;
break;
case MODEL_CY7C64013:
offset = 2;
break;
default:
offset = 0;
break;
}
if (ucom_get_data(&sc->sc_ucom, pc1, offset,
sc->sc_olen - offset, &actlen)) {
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
req.bRequest = UR_SET_REPORT;
USETW2(req.wValue, UHID_OUTPUT_REPORT, sc->sc_oid);
req.wIndex[0] = sc->sc_iface_no;
req.wIndex[1] = 0;
USETW(req.wLength, sc->sc_olen);
switch (sc->sc_model) {
case MODEL_CY7C63743:
data[0] = actlen;
break;
case MODEL_CY7C64013:
data[0] = 0;
data[1] = actlen;
break;
default:
break;
}
usbd_copy_in(pc0, 0, &req, sizeof(req));
usbd_copy_in(pc1, 0, data, offset);
usbd_xfer_set_frame_len(xfer, 0, sizeof(req));
usbd_xfer_set_frame_len(xfer, 1, sc->sc_olen);
usbd_xfer_set_frames(xfer, sc->sc_olen ? 2 : 1);
usbd_transfer_submit(xfer);
}
return;
default: /* Error */
if (error == USB_ERR_CANCELLED) {
return;
}
DPRINTF("error=%s\n",
usbd_errstr(error));
goto tr_transferred;
}
}
static void
ucycom_cfg_write(struct ucycom_softc *sc, uint32_t baud, uint8_t cfg)
{
struct usb_device_request req;
uint16_t len;
usb_error_t err;
len = sc->sc_flen;
if (len > sizeof(sc->sc_temp_cfg)) {
len = sizeof(sc->sc_temp_cfg);
}
sc->sc_cfg = cfg;
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
req.bRequest = UR_SET_REPORT;
USETW2(req.wValue, UHID_FEATURE_REPORT, sc->sc_fid);
req.wIndex[0] = sc->sc_iface_no;
req.wIndex[1] = 0;
USETW(req.wLength, len);
sc->sc_temp_cfg[0] = (baud & 0xff);
sc->sc_temp_cfg[1] = (baud >> 8) & 0xff;
sc->sc_temp_cfg[2] = (baud >> 16) & 0xff;
sc->sc_temp_cfg[3] = (baud >> 24) & 0xff;
sc->sc_temp_cfg[4] = cfg;
err = ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
&req, sc->sc_temp_cfg, 0, 1000);
if (err) {
DPRINTFN(0, "device request failed, err=%s "
"(ignored)\n", usbd_errstr(err));
}
}
static int
ucycom_pre_param(struct ucom_softc *ucom, struct termios *t)
{
switch (t->c_ospeed) {
case 600:
case 1200:
case 2400:
case 4800:
case 9600:
case 19200:
case 38400:
case 57600:
#if 0
/*
* Stock chips only support standard baud rates in the 600 - 57600
* range, but higher rates can be achieved using custom firmware.
*/
case 115200:
case 153600:
case 192000:
#endif
break;
default:
return (EINVAL);
}
return (0);
}
static void
ucycom_cfg_param(struct ucom_softc *ucom, struct termios *t)
{
struct ucycom_softc *sc = ucom->sc_parent;
uint8_t cfg;
DPRINTF("\n");
if (t->c_cflag & CIGNORE) {
cfg = sc->sc_cfg;
} else {
cfg = 0;
switch (t->c_cflag & CSIZE) {
default:
case CS8:
++cfg;
case CS7:
++cfg;
case CS6:
++cfg;
case CS5:
break;
}
if (t->c_cflag & CSTOPB)
cfg |= UCYCOM_CFG_STOPB;
if (t->c_cflag & PARENB)
cfg |= UCYCOM_CFG_PAREN;
if (t->c_cflag & PARODD)
cfg |= UCYCOM_CFG_PARODD;
}
ucycom_cfg_write(sc, t->c_ospeed, cfg);
}
static void
ucycom_intr_read_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct ucycom_softc *sc = usbd_xfer_softc(xfer);
struct usb_page_cache *pc;
uint8_t buf[2];
uint32_t offset;
int len;
int actlen;
usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
pc = usbd_xfer_get_frame(xfer, 0);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
switch (sc->sc_model) {
case MODEL_CY7C63743:
if (actlen < 1) {
goto tr_setup;
}
usbd_copy_out(pc, 0, buf, 1);
sc->sc_ist = buf[0] & ~0x07;
len = buf[0] & 0x07;
actlen--;
offset = 1;
break;
case MODEL_CY7C64013:
if (actlen < 2) {
goto tr_setup;
}
usbd_copy_out(pc, 0, buf, 2);
sc->sc_ist = buf[0] & ~0x07;
len = buf[1];
actlen -= 2;
offset = 2;
break;
default:
DPRINTFN(0, "unsupported model number\n");
goto tr_setup;
}
if (len > actlen)
len = actlen;
if (len)
ucom_put_data(&sc->sc_ucom, pc, offset, len);
/* FALLTHROUGH */
case USB_ST_SETUP:
tr_setup:
usbd_xfer_set_frame_len(xfer, 0, sc->sc_ilen);
usbd_transfer_submit(xfer);
return;
default: /* Error */
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
return;
}
}
static void
ucycom_poll(struct ucom_softc *ucom)
{
struct ucycom_softc *sc = ucom->sc_parent;
usbd_transfer_poll(sc->sc_xfer, UCYCOM_N_TRANSFER);
}