freebsd-dev/lib/libarchive/archive_read_support_compression_bzip2.c
Tim Kientzle 887bcd3995 Add statistics: track offset in compressed and uncompressed archive,
provide an interface for the client to query this information.
2004-04-28 04:41:27 +00:00

364 lines
9.8 KiB
C

/*-
* Copyright (c) 2003-2004 Tim Kientzle
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "archive_platform.h"
__FBSDID("$FreeBSD$");
#include <err.h>
#include <errno.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <bzlib.h>
#include "archive.h"
#include "archive_private.h"
struct private_data {
bz_stream stream;
unsigned char *uncompressed_buffer;
size_t uncompressed_buffer_size;
char *read_next;
int64_t total_out;
};
static int bid(const void *, size_t);
static int finish(struct archive *);
static int init(struct archive *, const void *, size_t);
static ssize_t read_ahead(struct archive *, const void **, size_t);
static ssize_t read_consume(struct archive *, size_t);
static int drive_decompressor(struct archive *a, struct private_data *);
int
archive_read_support_compression_bzip2(struct archive *a)
{
return (__archive_read_register_compression(a, bid, init));
}
/*
* Test whether we can handle this data.
*
* This logic returns zero if any part of the signature fails. It
* also tries to Do The Right Thing if a very short buffer prevents us
* from verifying as much as we would like.
*/
static int
bid(const void *buff, size_t len)
{
const unsigned char *buffer;
int bits_checked;
if (len < 1)
return (0);
buffer = buff;
bits_checked = 0;
if (buffer[0] != 'B') /* Verify first ID byte. */
return (0);
bits_checked += 8;
if (len < 2)
return (bits_checked);
if (buffer[1] != 'Z') /* Verify second ID byte. */
return (0);
bits_checked += 8;
if (len < 3)
return (bits_checked);
if (buffer[2] != 'h') /* Verify third ID byte. */
return (0);
bits_checked += 8;
if (len < 4)
return (bits_checked);
if (buffer[3] < '1' || buffer[3] > '9')
return (0);
bits_checked += 5;
/*
* Research Question: Can we do any more to verify that this
* really is BZip2 format?? For 99.9% of the time, the above
* test is sufficient, but it would be nice to do a more
* thorough check. It's especially troubling that the BZip2
* signature begins with all ASCII characters; a tar archive
* whose first filename begins with 'BZh3' would potentially
* fool this logic. (It may also be possible to gaurd against
* such anomalies in archive_read_support_compression_none.)
*/
return (bits_checked);
}
/*
* Setup the callbacks.
*/
static int
init(struct archive *a, const void *buff, size_t n)
{
struct private_data *state;
int ret;
a->compression_code = ARCHIVE_COMPRESSION_BZIP2;
a->compression_name = "bzip2";
state = malloc(sizeof(*state));
if (state == NULL) {
archive_set_error(a, ENOMEM,
"Can't allocate data for %s decompression",
a->compression_name);
return (ARCHIVE_FATAL);
}
memset(state, 0, sizeof(*state));
state->uncompressed_buffer_size = 64 * 1024;
state->uncompressed_buffer = malloc(state->uncompressed_buffer_size);
state->stream.next_out = state->uncompressed_buffer;
state->read_next = state->uncompressed_buffer;
state->stream.avail_out = state->uncompressed_buffer_size;
if (state->uncompressed_buffer == NULL) {
archive_set_error(a, ENOMEM,
"Can't allocate %s decompression buffers",
a->compression_name);
free(state);
return (ARCHIVE_FATAL);
}
/*
* A bug in bzlib.h: stream.next_in should be marked 'const'
* but isn't (the library never alters data through the
* next_in pointer, only reads it). The result: this ugly
* cast to remove 'const'.
*/
state->stream.next_in = (void *)(uintptr_t)(const void *)buff;
state->stream.avail_in = n;
a->compression_read_ahead = read_ahead;
a->compression_read_consume = read_consume;
a->compression_finish = finish;
/* Initialize compression library. */
ret = BZ2_bzDecompressInit(&(state->stream),
0 /* library verbosity */,
0 /* don't use slow low-mem algorithm */);
/* If init fails, try using low-memory algorithm instead. */
if (ret == BZ_MEM_ERROR) {
ret = BZ2_bzDecompressInit(&(state->stream),
0 /* library verbosity */,
1 /* do use slow low-mem algorithm */);
}
if (ret == BZ_OK) {
a->compression_data = state;
return (ARCHIVE_OK);
}
/* Library setup failed: Clean up. */
archive_set_error(a, ARCHIVE_ERRNO_MISC,
"Internal error initializing %s library", a->compression_name);
free(state->uncompressed_buffer);
free(state);
/* Override the error message if we know what really went wrong. */
switch (ret) {
case BZ_PARAM_ERROR:
archive_set_error(a, ARCHIVE_ERRNO_MISC,
"Internal error initializing compression library: "
"invalid setup parameter");
break;
case BZ_MEM_ERROR:
archive_set_error(a, ARCHIVE_ERRNO_MISC,
"Internal error initializing compression library: "
"out of memory");
break;
case BZ_CONFIG_ERROR:
archive_set_error(a, ARCHIVE_ERRNO_MISC,
"Internal error initializing compression library: "
"mis-compiled library");
break;
}
return (ARCHIVE_FATAL);
}
/*
* Return a block of data from the decompression buffer. Decompress more
* as necessary.
*/
static ssize_t
read_ahead(struct archive *a, const void **p, size_t min)
{
struct private_data *state;
int read_avail, was_avail, ret;
state = a->compression_data;
was_avail = -1;
if (!a->client_reader) {
archive_set_error(a, ARCHIVE_ERRNO_PROGRAMMER,
"No read callback is registered? "
"This is probably an internal programming error.");
return (ARCHIVE_FATAL);
}
read_avail = state->stream.next_out - state->read_next;
if (read_avail + state->stream.avail_out < min) {
memmove(state->uncompressed_buffer, state->read_next,
read_avail);
state->read_next = state->uncompressed_buffer;
state->stream.next_out = state->read_next + read_avail;
state->stream.avail_out
= state->uncompressed_buffer_size - read_avail;
}
while (was_avail < read_avail && /* Made some progress. */
read_avail < (int)min && /* Haven't satisfied min. */
read_avail < (int)state->uncompressed_buffer_size) { /* !full */
if ((ret = drive_decompressor(a, state)) != ARCHIVE_OK)
return (ret);
was_avail = read_avail;
read_avail = state->stream.next_out - state->read_next;
}
*p = state->read_next;
return (read_avail);
}
/*
* Mark a previously-returned block of data as read.
*/
static ssize_t
read_consume(struct archive *a, size_t n)
{
struct private_data *state;
state = a->compression_data;
a->file_position += n;
state->read_next += n;
if (state->read_next > state->stream.next_out)
errx(1, "Internal error: Request to consume too many "
"bytes from %s decompressor.\n",
a->compression_name);
return (n);
}
/*
* Clean up the decompressor.
*/
static int
finish(struct archive *a)
{
struct private_data *state;
int ret;
state = a->compression_data;
ret = ARCHIVE_OK;
switch (BZ2_bzDecompressEnd(&(state->stream))) {
case BZ_OK:
break;
default:
archive_set_error(a, ARCHIVE_ERRNO_MISC,
"Failed to clean up %s compressor", a->compression_name);
ret = ARCHIVE_FATAL;
}
free(state->uncompressed_buffer);
free(state);
a->compression_data = NULL;
if (a->client_closer != NULL)
(a->client_closer)(a, a->client_data);
return (ret);
}
/*
* Utility function to pull data through decompressor, reading input
* blocks as necessary.
*/
static int
drive_decompressor(struct archive *a, struct private_data *state)
{
ssize_t ret;
int decompressed, total_decompressed;
char *output;
total_decompressed = 0;
for (;;) {
if (state->stream.avail_in == 0) {
ret = (a->client_reader)(a, a->client_data,
(const void **)&state->stream.next_in);
if (ret < 0) {
/*
* TODO: Find a better way to handle
* this read failure.
*/
goto fatal;
}
if (ret == 0 && total_decompressed == 0) {
archive_set_error(a, EIO,
"Premature end of %s compressed data",
a->compression_name);
return (ARCHIVE_FATAL);
}
a->raw_position += ret;
state->stream.avail_in = ret;
}
{
output = state->stream.next_out;
/* Decompress some data. */
ret = BZ2_bzDecompress(&(state->stream));
decompressed = state->stream.next_out - output;
/* Accumulate the total bytes of output. */
state->total_out += decompressed;
total_decompressed += decompressed;
switch (ret) {
case BZ_OK: /* Decompressor made some progress. */
if (decompressed > 0)
return (ARCHIVE_OK);
break;
case BZ_STREAM_END: /* Found end of stream. */
return (ARCHIVE_OK);
default:
/* Any other return value is an error. */
goto fatal;
}
}
}
return (ARCHIVE_OK);
/* Return a fatal error. */
fatal:
archive_set_error(a, ARCHIVE_ERRNO_MISC, "%s decompression failed",
a->compression_name);
return (ARCHIVE_FATAL);
}