Adrian Chadd 240e4eebaf [atheros] [mips] Add the GPIO driver (back) to the TL-WDR3600/TL-WDR4300 kernel. ... So it turns out that sometime in the past I removed the GPIO bits here and was going to move it into a module in order to save a little space. However, it turns out that was a mistake on this particular AP - it uses a pair of GPIO lines to control the two receive LNAs on the 2GHz radio and without them enabled the radio is a LOT DEAF. With this re-introduced (and some replacement userland tools to save space, *cough* cpio/libarchive) I can actually use these chipsets again as a 2G station. Without the LNA the AP was seeing a per-radio RSSI upstairs here of around 3-5dB, with the LNA on it's around 15dB, more than enough to actually use wifi upstairs and also in line with the other Atheros / Intel devices I have up here. Big oopsie to Adrian. Big, big oopsie.		2019-12-17 00:00:03 +00:00
..
atheros	Move phys_avail definition into MI code. It is consumed in the MI layer and	2019-08-16 00:45:14 +00:00
beri	Move phys_avail definition into MI code. It is consumed in the MI layer and	2019-08-16 00:45:14 +00:00
broadcom	Move phys_avail definition into MI code. It is consumed in the MI layer and	2019-08-16 00:45:14 +00:00
cavium	Regularize my copyright notice	2019-12-04 16:56:11 +00:00
conf	[atheros] [mips] Add the GPIO driver (back) to the TL-WDR3600/TL-WDR4300 kernel.	2019-12-17 00:00:03 +00:00
include	Introduce vm_page_astate.	2019-12-10 18:14:50 +00:00
ingenic	Remove "all rights reserved" from copyright for the file that Jared McNeill	2019-12-03 21:05:33 +00:00
malta	Move phys_avail definition into MI code. It is consumed in the MI layer and	2019-08-16 00:45:14 +00:00
mediatek	Move phys_avail definition into MI code. It is consumed in the MI layer and	2019-08-16 00:45:14 +00:00
mips	Repeat the spinlock_enter/exit pattern from amd64 on other architectures to	2019-12-16 20:15:04 +00:00
nlm	schedlock 4/4	2019-12-15 21:26:50 +00:00