freebsd-dev/sys/dev
Jack F Vogel 245c81a9ea A few minor fixes:
- add a moderation value to the Link vector
   - allow disabling HW RSC on the 82599 if LRO
     is not enabled.
   - correct error in the stats code
   - change optic type on the 82598 DA device

Thanks to Andrew Boyer for the changes.
2010-05-14 22:00:37 +00:00
..
aac Use enums in the aac_command_status_table rather than duplicating the same 2010-04-13 12:10:55 +00:00
acpi_support Prefer correct and simpler backlight control methods for ASUS G2K laptop. 2010-02-13 02:30:43 +00:00
acpica Merge ACPICA 20100428. 2010-04-28 22:25:27 +00:00
adb
adlink
advansys
ae Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
age With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify 2010-04-19 22:10:40 +00:00
agp Push down the acquisition of the page queues lock into vm_page_unwire(). 2010-05-05 03:45:46 +00:00
aha
ahb
ahci Enable PCI busmastering explicitly to be sure. 2010-05-02 14:46:05 +00:00
aic
aic7xxx Document the usfs driver and the NO_SYSCTL_DESCR option, and update the comment for umass. 2010-02-08 20:57:42 +00:00
alc With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify 2010-04-19 22:10:40 +00:00
ale It seems ale(4) controllers do not like to see TCP payload in the 2010-04-26 21:08:15 +00:00
amd
amdsbwd
amdtemp
amr
an Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
arcmsr
asmc
asr
ata Add Target/LUN ID checks. 2010-04-30 08:37:00 +00:00
ath Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
atkbdc On certain chipsets AT keyboard controller isn't present and is 2010-04-29 06:16:00 +00:00
auxio
bce Add a fastpath to allocate from packet zone when using m_getjcl. 2010-05-07 22:09:17 +00:00
bfe
bge For the on-board interfaces found in Fujitsu SPARC64 machines obtain the 2010-04-26 18:56:06 +00:00
bktr Use standard types in preference to BSD types so that these header files 2010-03-28 00:10:09 +00:00
bm
buslogic
bwi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
bwn Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cardbus
cas - Don't set CAS_PCS_DATAPATH to anything except CAS_PCS_DATAPATH_SERDES 2010-05-03 20:57:16 +00:00
ce Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cfe
cfi
ciss Initialize the callout structure earlier in attach before calling any 2010-04-28 18:49:45 +00:00
cm Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cmx
coretemp
cp Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cpuctl
cpufreq
cs Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ct
ctau Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cxgb Don't ring the tx doorbell for every frame when we know more frames 2010-05-05 22:52:06 +00:00
cy
dc
dcons
de
digi
dpms
dpt
drm Push down the acquisition of the page queues lock into vm_page_unwire(). 2010-05-05 07:40:54 +00:00
e1000 Address the LOD that some are seeing, put the RX lock 2010-04-28 19:22:52 +00:00
ed Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
eisa
en
ep Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
esp Include <machine/ofw_machdep.h> for OF_getscsinitid(). 2010-05-10 20:02:39 +00:00
et
ex Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
exca
fatm
fb Allocate memory for VBE info block with malloc(9), not as static local. 2010-04-07 21:38:42 +00:00
fdc
fe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
firewire Cast a bus_size_t to a (size_t) to use %zd specifier. Not quite the 2010-03-29 17:24:23 +00:00
flash
fxp If controller received bad frames make sure to update newly added 2010-05-14 17:39:28 +00:00
gem According to the Linux sungem driver, in case of Apple (K2) GMACs 2010-02-22 21:01:08 +00:00
glxsb
hatm
hifn
hme The NetBSD Foundation has granted permission to remove clause 3 and 4 from 2010-03-03 17:55:51 +00:00
hptiop
hptmv
hptrr
hwpmc When configuring a system-wide couting PMC, hwpmc was incorrectly logging process mappings for that PMC. Nothing ever reads pmc logs out of a counting PMC, so the log buffers were leaked when the PMC was deconfigured. The process mappings are only useful for sampling PMCs anyway, so only log the mappings if the PMC is a sampling PMC. 2010-05-01 22:04:58 +00:00
ic
ichsmb
ichwd
ida
ie Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ieee488 GPIB overhaul, part #2: make the tnt4882 driver work with the newer 2010-02-01 21:21:10 +00:00
if_ndis
iicbus Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
iir
io - Extract the IODEV_PIO interface from ia64 and make it MI. 2010-04-28 15:38:01 +00:00
ipmi
ips
ipw Enable 5.5 and 11Mbit TX rates. 2010-05-11 17:14:17 +00:00
iscsi/initiator
isp On sparc64 obtain the initiator ID from the Open Firmware device tree 2010-05-03 18:39:40 +00:00
ispfw Don't spam dmesg with "registered firmware ..." when module is compiled 2010-03-05 03:37:42 +00:00
iwi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
iwn Add a workaround for a bug in the firmware regarding the transition 2010-05-06 17:53:04 +00:00
ixgb
ixgbe A few minor fixes: 2010-05-14 22:00:37 +00:00
jme Add TSO support on VLANs. jme(4) controllers do not require VLAN 2010-02-22 22:05:49 +00:00
joy
kbd
kbdmux
ksyms
le Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
led
lge
lindev
lmc
malo Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
mc146818
mca
mcd
md Lock the page around vm_page_activate() and vm_page_deactivate() calls 2010-05-03 20:31:13 +00:00
mem
mfi Correct mfip module dependency on mfi. This allows mfip to be loaded as 2010-03-02 17:34:11 +00:00
mge Assorted fixes for mge(4). 2010-02-17 17:03:04 +00:00
mii Add Marvell PHYG65G Gigabit PHY which is found on 88E8059 Yukon Optima. 2010-04-30 19:01:55 +00:00
mk48txx
mlx
mly
mmc
mn
mpt Print IR_RESYNC updates informatively. 2010-05-02 22:48:27 +00:00
mse
msk When VLAN hardware tagging is disabled, make sure to disable VLAN 2010-05-04 22:24:19 +00:00
mvs Fix polled operation. Now it is possible to dump kernel via mvs(4). 2010-05-06 06:44:26 +00:00
mwl Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
mxge Add a fastpath to allocate from packet zone when using m_getjcl. 2010-05-07 22:09:17 +00:00
my Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ncv
nfe With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify 2010-04-19 22:10:40 +00:00
nge
nmdm
nsp
null
nve
nvram
nxge Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ofw With r205496 in place we should ensure that nargs and nreturns are always 2010-04-02 21:48:27 +00:00
patm
pbio
pccard
pccbb
pcf
pci Small whitespace fixes. 2010-03-11 15:25:47 +00:00
pcn
pdq Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
powermac_nvram
ppbus Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ppc Add PCI ID for MCS9901's parallel port. 2010-03-23 20:08:18 +00:00
pst
pty
puc
quicc Remove a soft member which was never used. 2010-05-02 19:05:57 +00:00
ral Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
random
rc
re Don't change PCIe maximum read request size to 2048 on RTL810x 2010-05-07 23:05:27 +00:00
rndtest
rp
safe
sbni Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
scc
scd
sdhci
sec
sf
sge SiS190 supports RX 10 bytes padding, CRC stripping as well as VLAN 2010-05-10 17:35:17 +00:00
si
siba Revert r204992 and just wrap it all in ifdef INVARIANTS to fix the debug and 2010-03-11 08:03:56 +00:00
siis Make SATA XPT negotiate and enable some additional SATA features, such as: 2010-05-02 12:07:47 +00:00
sio
sis It's not necessary to reset the chip every time an input overflow event 2010-04-20 19:30:12 +00:00
sk
smbus
smc Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
sn Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snc Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snp
sound - Remove more dead code[1]. Since r207330, we only need to check division 2010-05-04 16:56:59 +00:00
speaker
spibus
ste
stg
stge The NetBSD Foundation has granted permission to remove clause 3 and 4 from 2010-03-01 16:52:11 +00:00
streams
sym - On sparc64 obtain the initiator ID from the Open Firmware device tree 2010-04-27 18:05:33 +00:00
syscons Correct beastie_saver module name. 2010-04-07 18:42:21 +00:00
tdfx
ti Neither the page lock nor the page queues lock is required to unwire and 2010-05-03 15:51:59 +00:00
tl
trm
tsec
twa
twe
tx
txp
uart Remove redundant checking of sc_leaving (uart_intr() already handles this). 2010-05-02 19:07:19 +00:00
ubsec Cast the bus_size_t to a intmax_t rather than assuming type-punning to 2010-03-29 17:26:24 +00:00
usb Sync run(4) driver from author's site. 2010-05-13 00:19:03 +00:00
utopia
vge
vkbd
vr
vx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
watchdog
wb
wds
wi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wl Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wpi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
xe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
xen Switch to our preferred 2-clause BSD license. 2010-05-05 20:39:02 +00:00
xl