freebsd-dev/sys/pci
Justin T. Gibbs 33cb7dbb53 The aic78X0 cards have 0xff in all bytes of scratch ram after POST. If
a BIOS was not installed, this will still be true by the time we probe
the chip.  We use this heuristic to determine if we should use the left
over scratch ram target settings for controllers that don't have an
SEEPROM.  We also "snapshot" the host adapter SCSI id and whether ultra
is enabled or not and use these values if a BIOS was installed.  The card
will act as if a BIOS was installed even if there wasn't one if you warm
reboot, but since the scratch ram area is still valid in this case, its
hardly worth the effort of writing a shutdown routing that clears out
the scratch ram.  This should make users of motherboard controllers
happy.
1996-05-10 16:26:41 +00:00
..
aic7870.c The aic78X0 cards have 0xff in all bytes of scratch ram after POST. If 1996-05-10 16:26:41 +00:00
bt9xx.c Add PCI ID for older revision Buslogic 946 cards 1996-02-18 07:44:16 +00:00
dc21040.h Fix a bunch of spelling errors in the comment fields of 1996-01-30 23:02:38 +00:00
if_de.c Another sweep over the pmap/vm macros, this time with more focus on 1996-05-03 21:01:54 +00:00
if_fxp.c Removed sections 3 and 4 from my copyright. 1996-04-08 01:31:42 +00:00
if_fxpreg.h Removed sections 3 and 4 from my copyright. 1996-04-08 01:31:42 +00:00
if_pdq.c Eliminate reference to ac_ipaddr in FreeBSD case. 1996-03-23 19:29:10 +00:00
if_vx.c Clean up Ethernet drivers: 1996-02-06 18:51:28 +00:00
if_vxreg.h Clean up Ethernet drivers: 1996-02-06 18:51:28 +00:00
locate.pl Perl script to convert NCR script address into label+offset. 1995-09-08 19:37:11 +00:00
meteor_reg.h A bug fix and a couple of new modes for the meteor driver. 1996-03-28 20:28:14 +00:00
meteor.c Another sweep over the pmap/vm macros, this time with more focus on 1996-05-03 21:01:54 +00:00
ncr.c Another sweep over the pmap/vm macros, this time with more focus on 1996-05-03 21:01:54 +00:00
ncrreg.h Stylistic changes. Update Wolfgang's e-mail address. 1995-03-21 22:48:36 +00:00
pci.c Fix logic bug in pci bridge code. For a PCI-PCI bridge, secondary 1996-04-25 06:04:27 +00:00
pcibus.h Fix a bunch of spelling errors in the comment fields of 1996-01-30 23:02:38 +00:00
pcireg.h Add support for multi-function devices. 1996-01-25 18:32:00 +00:00
pcisupport.c Removed now-unused #includes of <machine/cpu.h>. They were for bootverbose 1996-04-07 17:32:42 +00:00
pcivar.h Fixed unsigned longs that should have been vm_offset_t. 1996-03-19 15:03:00 +00:00
pdq_os.h Removed $Log$ 1996-05-02 14:58:15 +00:00
pdq.c Use new printf features rather than local kludges. 1996-01-24 21:12:23 +00:00
pdqreg.h Fix a bunch of spelling errors in the comment fields of 1996-01-30 23:02:38 +00:00
README.de Make this documentation more sane in the context of 2.0. 1994-10-29 13:13:40 +00:00
README.de-le Make this documentation more sane in the context of 2.0. 1994-10-29 13:13:40 +00:00
wd82371.c removed: 1996-05-02 14:21:14 +00:00
wd82371reg.h Implement a prototype interface to bus-master IDE DMA on the Triton 1996-01-28 22:16:20 +00:00

$Id: README.de-le,v 1.1 1994/10/01 20:16:44 wollman Exp $

----------------

The enclosed drivers should be considered beta-test software.  These
drivers are in no way supported by Digital Equipment.  See the
disclaimers in the sources for more information.  Please be aware that
Digital does not employee me to write drivers for FreeBSD.

This kit contains one driver:

	de	DEC DE435 PCI NIC or compatible

See README.de for information and installation instruction specific to this
driver.

Could you please send me the startup messages in the boot
long along with the type of your PC once the driver configures?  

If you have any problems, comments, suggestions, rant or raves, don't
hesitate to send me mail @ thomas@lkg.dec.com.

Lastly, if you change or modify the code, I want context diffs of your
changes.  I want this to the canonical DEC EtherWORKS driver kit for
FreeBSD, NetBSD, BSD/386, and any other BSD based O/S.  Please make
sure your diffs are approriate conditionalized.

Thanks,
Matt Thomas
--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/