freebsd-dev/sys/mips/rmi/iomap.h
Randall Stewart 257c916acf More initial RMI files. Note that these so far do NOT
compile and many of them may disappear. For example
the xlr_boot1_console.c is old code that is ifdef'd out.
I will clean these sorts of things up as I make progress
on the port. So far the only thing I have I think straightened
out is the bits around the interupt handling... and hey that
may be broke ;-)
2009-10-15 21:14:42 +00:00

111 lines
4.0 KiB
C

/*-
* Copyright (c) 2003-2009 RMI Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of RMI Corporation, nor the names of its contributors,
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* RMI_BSD */
#ifndef _RMI_IOMAP_H_
#define _RMI_IOMAP_H_
#include <machine/endian.h>
#define DEFAULT_XLR_IO_BASE 0xffffffffbef00000ULL
#define XLR_IO_SIZE 0x1000
#define XLR_IO_BRIDGE_OFFSET 0x00000
#define XLR_IO_DDR2_CHN0_OFFSET 0x01000
#define XLR_IO_DDR2_CHN1_OFFSET 0x02000
#define XLR_IO_DDR2_CHN2_OFFSET 0x03000
#define XLR_IO_DDR2_CHN3_OFFSET 0x04000
#define XLR_IO_RLD2_CHN0_OFFSET 0x05000
#define XLR_IO_RLD2_CHN1_OFFSET 0x06000
#define XLR_IO_SRAM_OFFSET 0x07000
#define XLR_IO_PIC_OFFSET 0x08000
#define XLR_IO_PCIX_OFFSET 0x09000
#define XLR_IO_HT_OFFSET 0x0A000
#define XLR_IO_SECURITY_OFFSET 0x0B000
#define XLR_IO_GMAC_0_OFFSET 0x0C000
#define XLR_IO_GMAC_1_OFFSET 0x0D000
#define XLR_IO_GMAC_2_OFFSET 0x0E000
#define XLR_IO_GMAC_3_OFFSET 0x0F000
#define XLR_IO_SPI4_0_OFFSET 0x10000
#define XLR_IO_XGMAC_0_OFFSET 0x11000
#define XLR_IO_SPI4_1_OFFSET 0x12000
#define XLR_IO_XGMAC_1_OFFSET 0x13000
#define XLR_IO_UART_0_OFFSET 0x14000
#define XLR_IO_UART_1_OFFSET 0x15000
#define XLR_IO_I2C_0_OFFSET 0x16000
#define XLR_IO_I2C_1_OFFSET 0x17000
#define XLR_IO_GPIO_OFFSET 0x18000
#define XLR_IO_FLASH_OFFSET 0x19000
#define XLR_IO_TB_OFFSET 0x1C000
#define XLR_IO_GMAC_4_OFFSET 0x20000
#define XLR_IO_GMAC_5_OFFSET 0x21000
#define XLR_IO_GMAC_6_OFFSET 0x22000
#define XLR_IO_GMAC_7_OFFSET 0x23000
#define XLR_IO_PCIE_0_OFFSET 0x1E000
#define XLR_IO_PCIE_1_OFFSET 0x1F000
#define XLR_IO_USB_0_OFFSET 0x24000
#define XLR_IO_USB_1_OFFSET 0x25000
#define XLR_IO_COMP_OFFSET 0x1d000
/* Base Address (Virtual) of the PCI Config address space
* For now, choose 256M phys in kseg1 = 0xA0000000 + (1<<28)
* Config space spans 256 (num of buses) * 256 (num functions) * 256 bytes
* ie 1<<24 = 16M
*/
#define DEFAULT_PCI_CONFIG_BASE 0x18000000
#define DEFAULT_HT_TYPE0_CFG_BASE 0x16000000
#define DEFAULT_HT_TYPE1_CFG_BASE 0x17000000
typedef volatile __uint32_t xlr_reg_t;
extern unsigned long xlr_io_base;
#define xlr_io_mmio(offset) ((xlr_reg_t *)(xlr_io_base+(offset)))
#define xlr_read_reg(base, offset) (__ntohl((base)[(offset)]))
#define xlr_write_reg(base, offset, value) ((base)[(offset)] = __htonl((value)))
extern void on_chip_init(void);
#endif /* _RMI_IOMAP_H_ */